Suspension geometry | Jacking | Instant center & axis | Roll center | Camber gain | Scrub of wheel

[@a_r_u_n7595]

This is One of the Perfect videos we can found on KZbin..thanks for helping those beginners..

[@thevatsaljain]

Thank you!

[@timmytexlonghorns2206]

this is by far the deepest explanation of suspension geometry i've seen yet, this explanation is so in depth, thanks for being the guy who finally has through explanation

[@alokgupta138]

I am a trainee engineer at JLR, your videos have been highly informative. Keep up the good work!

[@thevatsaljain]

Awesome, thank you!

[@amanagarwalla6544]

I like the way you explain the concepts here... Although most of the content is from Milliken and Milliken, yet adding a video-audio solution to understand the concepts, always help. . Keep bringing videos like these... Thanks a lot.

[@tuzonthume]

chapter nine of the Chevy Power book taught me this the year I helped my friend on his asphalt short track street stock camaro.

[@mohamedbilal864]

This is just OUTSTANDING.. the amount of knowledge and information you're sharing to us.. Truly helpful for people with Passion for Automotive Engineering.. Thank you, genuinely..

[@thevatsaljain]

Thank you, Keep Learning!

[@mohamedbilal864]

@@thevatsaljain What software would you suggest for in depth Suspension Geometry Analysis?

[@Facty_WallaEr.]

This video consist of mind blowing concept of suspension geometry.

[@jagsproduction]

This channel is best for suspension

[@Shubham-md6kj]

Only person providing good content on vehicle complexities

[@thevatsaljain]

Thank you

[@akioasakura3624]

Man you’re a G. Big up. Thank you so much sir 🔥🔥🙏🙏🙏🙏🙏🙏

[@thevatsaljain]

You're very welcome! I appreciate your kind words.

[@pjay3028]

Excellent video, thanks very much.

[@jebuswookiee]

What is the program that you are using at @3:53? Looks really cool and would help a lot!

[@wtacademy5091]

What if the upper wishbone is inclined?, what would be the modification on the instant centre and steering rods?. Excelent video!.

[@wtacademy5091]

Another question that i've seen is what happens when the wishbones are inclined in the superior view (top view), i mean when the wishbones are inclined in all the 3 planes. And what happens with the steering rod in those cases, thanks!.

[@NidhiSingh-nn1go]

ic will always be the extension on control arms, when you incline the UCA the intersection of upper and lower control arm would be at a different point and that point would be the IC.

[@dougstenger4085]

I've seen lots of these videos but none of them explain what we should want in real terms, ie, I want to use specific hubs or maybe design my own but how do I determine the desired arm length, anti dive/squat, instant center ect. I currently stuck using factory geometry but if I could understand the effects of changes in layman's terms, I could experiment. Your videos help but don't go quite far enough.

[@zeitseele7109]

Very detailed and clear engineering video. Kindly use AI for reading the context, It is easyier for us to fast pase x2 to watch. Thank you so much for sharing.

[@thevatsaljain]

Thank you for the positive feedback!

[@gerardwallis6931]

I can only concur with other comments - outistanding work. I would be interested in seeing a study of Ford GT40 or Ford GT or Corvette Mid engine front and rear suspension systems.

[@thevatsaljain]

Thanks! I appreciate your interest.

[@mainakdatta6443]

the double wishbone set up also gets a strut, does that increase the number of links??

[@amuthamuthuraj8028]

Superb explanation of concepts...I have a request, can you make a video explaining the quarter car model, half car model and full car model

[@thevatsaljain]

Thank you. Sure I will be uploading video on quarter, half and full car model. Stay tuned.

[@Aheitchoo]

Quite a good overview.

[@tturi2]

this is really good

[@imranpathan1536]

What are the effect of scrub on vehicle?? Great video 👍

[@brickstonicinfotech6752]

Hey, I'm a first year undergraduate in Mechanical Engineering. Please can you share some resources like books or any courses to further deepen our knowledge. Thank You.

[@NidhiSingh-nn1go]

tune to win and race car vehicle dynamics

[@johndoyle6673]

Vatsal - I love the video and the channel. Question for you about the jacking discussion at around 6:20-6:30 of the video. I think the force (Fy) would be multiplied due to the lever distance between the tire's contact patch and the lower spindle-to-control-arm mount point (lower ball joint). If the lower ball joint were moved lower (closer to the contact patch), this would reduce the amount of force F2 that is exerted on the lower ball joint and transferred through the control arm to the body. Let's assume the frame mount of the lower control arm is also moved lower the same amount as the ball joint, so the control arm angle towards the frame does not change. This would reduce the amount of force Fz contributing to jacking. Is that right? Now, let's move the upper spindle-to-control-arm mount point (upper ball joint) higher, resulting in a taller spindle overall. This time, though, we change the angle of the upper arm slightly to keep instant center (IC1) at its current distance from the wheel. Because of the further distance apart of the pickup points, does the force transferred back from IC1 (force F1) effectively have less of a multiplication effect, resulting in reduced jacking forces? It seems that overall, having a taller spindle (longer distance between ball joints) offers numerous benefits in this regard. Appreciate any thoughts.

[@pavangiri9435]

Sit, how can I find side view instant center.

[@suresha273]

Your all videos are great sir, can u pls put some videos for mathematical modelling of including both yaw and rolling based on Lagrange eqn

[@thevatsaljain]

I am trying to cover all topics.Soon I will upload a video on this also. Stay tuned.

[@nirmalparmar4224]

If a RWD car has front track 53 and rear track- 52 then How it reduce oversteer?how?

[@missionalwayspossible2261]

Very nice. Is there any software to design the suspension , steering, camber, i.e only for chasis part ?

[@thevatsaljain]

Suspension geometry can be designed in :- Lotus shark , Adams etc. and for 3D modeling i prefer Solidworks.

[@sycopahadi1254]

I want to learn more can you do a meeting with me and teach me there?

[@shubhamchobe2360]

Thx bro 👍🏎️

[@thevatsaljain]

Keep Learning!

[@SandeepSingh-43]

Can you make your powerpoints public?

[@ranjithav4417]

Can you please mention the software

[@thevatsaljain]

Suspension software:- www.vsusp.com/

[@codysimonson6260]

@@thevatsaljain I'm so glad people are starting to use this. It originally started on the locostusa.com forums and so far its one of the best 2D suspension geometry tools I've seen.

[@modified0]

How does one use the instant axis to apply it to a real race car... more specifically a dirt late model or modified? These cars have a lot of travel across the rf suspension instant axis. I'm assuming it moves as the car moves, i.e.the rf susp travels into jounce 5 to 6 inches.

[@preetheshb3237]

Best!!

[@thevatsaljain]

Thanks😃

[@nirmalparmar4224]

How anti dive and anti squat geometry reduce dive, squat of vehicle? Give reason

[@thevatsaljain]

Basically Anti-geometries changes the pitch attitude of Car.They apply a moment at instant center due to which the pitching or squatting attitude changes,and accordingly the forces are distributed among the A-arms and Strut.

[@nirmalparmar4224]

@@thevatsaljain I had asked you another query on your Instagram id can you please help me with that?

[@thevatsaljain]

Sure ,I will reply you asap.

[@nirmalparmar4224]

@@thevatsaljain hey, have you seen the query?

[@piyushagarwal805]

❤❤❤❤

[@markusolsson3542]

Your explanation of the McPherson suspension is completely wrong. In your 5 links diagram, your uprights will have no rotational stability what so ever. In a McPherson suspension, there is no horisontal rotation axis between the uprights and the lower part of the dampers. What is preventing the wheel from tilting or rotating in your diagram?

[@saurabhroy7100]

Try to engage animation rather than only literature.

[@sakshichauhan193]

Just cramped each and every single line of race car vehicle dynamics, Milliken Atleast try to explain those terms and those statements in your own words instead of just reading that book ....

[@thevatsaljain]

Yes these lines and information are from Milliken & Milliken racecar vehicle dynamics. But I think ,my animations and the way I showcased each and every thing is better then the book. Their is also some additional information if you have noticed and have watched the video properly rather then thinking everything is copied. Thanks for your time.

[@sakshichauhan193]

@@thevatsaljain firstly i have watched this video ,thats why am able to recognize from where you have took those lines ..... secondly, am just saying,try to explain those terms in your word ... from animations to they way of presentation every single thing was better than book and i have not said even a single word about it .... but that explanation part... was not there .... that comment was not to criticise you but just to gave you the honest feedback ....

[@thevatsaljain]

Thanks for the feedback.

[@Facty_WallaEr.]

But if you explain it in Hindi will much better

[@SandeepSingh-43]

Hi, I sent you a message on Instagram

[@NidhiSingh-nn1go]

stop reading milliken dude. you arent explaining stuff. you are just reading out milliken

[@thevatsaljain]

Thank you for the feedback.