Suzuki Gsxr Clutch Cable & Lever Adjustment (Easy)

Рет қаралды 12,333

Күн бұрын

Clutch Lever Adjustment along with slack adjustment. Easy follow along video.
I TAKE RISK! CONSIDER AT YOUR OWN RISK! GOOD LUCK!👍🏾
To adjust the clutch cable on a 2006 Suzuki GSXR 600, follow these steps:
1. Locate the Adjustment Points:
• Find the clutch cable adjuster on your motorcycle. It’s typically located near the clutch lever on the handlebars.
2. Loosen the Lock Nut:
• Use a wrench to loosen the lock nut on the clutch cable adjuster. This will allow you to make adjustments to the cable’s tension.
3. Adjust the Cable Tension:
• Turn the adjuster clockwise to increase cable tension, which will result in a tighter clutch lever, or counterclockwise to decrease tension for a looser clutch lever. Make small adjustments, as even a slight turn can significantly affect clutch engagement.
4. Check Clutch Lever Play:
• After making adjustments, check the amount of free play in the clutch lever. There should be a small amount of free play before the clutch engages. This helps ensure that the clutch is not constantly slipping.
5. Tighten the Lock Nut:
• Once you’re satisfied with the clutch cable adjustment, tighten the lock nut on the adjuster to secure the new cable tension in place.
6. Test the Clutch:
• With the adjustments in place, test the clutch to ensure that it engages and disengages smoothly. You should be able to release the clutch lever without any drag on the clutch plates, and it should fully engage when you pull the lever.
7. Recheck and Ride:
• Double-check the clutch’s operation and ensure there is no clutch slip. If everything feels right, take the motorcycle for a test ride to confirm that the clutch is working correctly under load.
It’s important to make precise adjustments to avoid over-tightening the clutch cable, which could lead to clutch slippage, or having too much free play, which can result in a lack of clutch engagement. Refer to your motorcycle’s service manual for specific recommendations on the amount of free play and cable tension. Proper clutch adjustment is crucial for the safe and efficient operation of your motorcycle. If you’re uncertain about the procedure, consider consulting a professional mechanic or your local dealership.

Пікірлер: 15

@fixitcarter 5 ай бұрын

Bro I gave up a bunch of info. If you’re adjusting it at the clutch lever you simply twist the barrel either direction. If you’re adjusting at engine you simply adjust it at the nut. Even gave up some additional diagnostic info. There’s a lot here. May not have answered your specific question but you can’t toss the whole vid. Good luck with your fix. If you have to adjust your cable your clutch is either gone or on the way.

@martinsmoto 5 ай бұрын

I think it was helpful but the "you'll figure out out" part threw me off lol. 😊 thanks though

@dannyglover1684 4 ай бұрын

what happens if my cable has slack but the lever and rod wont go back into resting position but when i adjust it it suddenly just goes super tight please help bike has been down for weeks its a gsxr600 07 k7

@fixitcarter 4 ай бұрын

Hey bro something like that I would need to see. You could need an adjustment down at the engine. Did anything different happen? Also could be something at clutch basket. I’d take it to the shop get it diagnosed then fix it myself. In most cases if you’re having major issues , usually an adjustment won’t fix it. Usually it’s the clutch going bad, and or the clutch basket in rare cases. I have videos on adjusting at the basket and changing the clutch. Good luck, and please report back with the answers and when you make it to figuring it out. It helps the community out. Thanks for checking out the content.