Suzuki RF 1146 Big Bore Build Part 7 (Final)

[@noodlebike]

Miss my RF. I sometimes dream I still have it!

[@thedarkknight1971]

OH I MISS my old RF9 days... 😢😢😢 😎🇬🇧

[@brentsmith5647]

I like the gentleman because he shows you everything in the videos and I love watching and learning thank you very much❤👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@nickrider5220]

Loved this series. On the road torque is king, it's something you tap into all the time 👍

[@jmillzthepimp27]

Truly inspiring man from someone who just got a rf that needs love

[@Adikxx]

Much appreciated 😚

[@brentsmith5647]

Brilliant gentlemen what makes really good videos thank you very much❤👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@ianhoyle8459]

You shared an interesting project. I’ve got the Bandit 1200 MK1 and it flies. It could do with six gears though. The down side is also my bike is heavy on fuel as I can’t ride it with much restraint and I don’t rev above 5K often. I usually get 33mpg and I haven’t noticed any better than 40mpg. Not as efficient as the water cooled version. I always wanted the GSX1100F power screen. 👍

[@Adikxx]

B12 great, my mate has one. Rebuild your carbs and put larger front sprocket on, you'll get much better mpg

[@brentsmith5647]

The gentleman is brilliant❤👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@ZeronXL]

I don't know what to say... Amazing...RF900TELEPORT

[@kwakkers68]

Wonderful to see the finished product! A brilliant job from start to finish! Bravo!

[@Adikxx]

Thank you brother❤

[@rm25088]

My first bike I ever stacked on the miles was my uncles 1994 rf900r. I miss that bike.

[@Alien937]

TORQUE OF THE DEVIL 😈

[@ChatBot1337]

Maaan you make me miss my RF. I had a 96 new but got rid of it after a short while because of constant police harassment. The irony of being on a squishy tourer but once you put plastics on, you are a target. Land of the free.

[@dohko4370]

beautyfull

[@ktotheswiss1617]

That's right, you put that tank bag on so you can lay on it. My rf600 came with an expandable one like that.

[@VNAV_PTH]

Too bad about the presumed communication miss between you and the painter. Please update when the fairing is repainted.

[@krzysztofkowol5392]

That 1146 sticker is lovely detail. Great final! Congrats!🎉 What can be more ultimate engine for that bike than 6 speed 1146😅 I'm coriouse af

[@Adikxx]

Oh yes it can be done even better😛. We shall see, maybe there will be one more RF project 😉

[@Errol.C-nz]

@@Adikxx big valve head ?.. from ? .. might be pushing luck though with a 6sp .. the wider 5sp gears & bearings for the loads.. a 750srad head ?

[@Adikxx]

@@Errol.C-nz yeah oversized valves would be great but they're ridiculously expensive and lead time is 6 months so i think i'll scrap that idea. SRAD head will not fit as it's a completely different design with cam chain on it's side, RF has a cam chain in the middle between cylinders 2 and 3. Good port work would probably work well, we shall see.

[@user-cy4yp1mq3v]

you must do a race carburator on your rf 900 i build also in holland ,suzuki gsx1100 is a old grandma in perfomive now rf is a beast after instal race carburat

[@Adikxx]

Thank you for leaving a comment

[@user-cy4yp1mq3v]

CBR900RR (92-97) KEIHIN carburator race i mean

[@colinhunter750]

Great bike and great job, well done.

[@daveboracay2132]

Amazing.

[@mcdk72]

Nice work:)

[@Jamie0707]

Wow, you really have skills and built something great👍 I set a new speed record for my RF900R today (it now has 13.600 Km (~8500 miles) on the clock) - 279 Kmh on the Autobahn, according to the speedometer. Subtracting 6,5% then equals actual GPS speed. So that were real 261,1 Kmh, which equates to 162,3 mph.

[@Adikxx]

Yep, that's about right. Fast bikes indeed !

[@mikerichardson6546]

Nice bike

[@daltogoncalves6664]

Boa noite amigo Eu também tenho uma Suzuki RF 900r ano 95 🇧🇷

[@danielklejas7825]

Takiego RFa sobie wymarzyłem kiedyś i takiego kupię ale skrzynie założę 6 biegową a już wiem że pasuje od RF600 :) . Co do silnika, to jest cudo! i jedyne co tam możesz teraz włożyć to od Busy no bo co? jest jeszcze BigKing :)) Czekam

[@waynecossington1574]

really liked build what about some 1100 cams

[@Adikxx]

Yes 1100 cams will work here , 750 too.

[@RobertGonzalez-qv5dh]

Hey bud love the RF900R I got it in red , I got about 22k miles on it have a rs3 yoshi pipe on but it has welded dB killer 😔 but still sounds good, what tips u have for more power?oh and how u get 6 gear?

[@Adikxx]

Watch this vid, some idea there . 6 speed box from RF600. kzbin.info/www/bejne/pqq7nXx6itGboLc

[@CarsAndMotorcycles]

Cool buildt! What engine are you planning to put i the RF? A gen 1 Busa?

[@Adikxx]

Nah that wouldn't fit. I thought about resleeving of gsxr1100 block for 79.5mm pistons, that would give 1200cc, head porting, big cams, maybe OS valves. Just a thought.

[@CarsAndMotorcycles]

@@Adikxx okey intresting! Please do and put it one the dyno later when finished! And also dyno the 1146 engine. Love to watch dyno videos 🙌

[@ktotheswiss1617]

put at least a 2007 gsxr1000 engine into it.

[@GeertPolo]

Why? If I’m right he didn’t chance the engine. Stupid reaction

[@bjornmunninghoff]

Show us how you did that engine swap🥲

[@perryburns6515]

Hi Adikxx. Just came across your vids as I'm looking at buying an RF. always had a thing for these! Can i ask what HP and torque figures you got at the rear wheel after upgrading to the 1146 set up?

[@Adikxx]

Hi. I didn't have it dynoed so don't know exactly. High rpm is about the same as in stock engine as head was left stock with small cams. Low and mid range is noticeably beefier.

[@perryburns6515]

@@Adikxx thanks for the quick reply sir! As a current MT-10 owner does the RF900R front end become light quite easily off the throttle?

[@Adikxx]

@@perryburns6515 Not really. They're heavy and stable.

[@Stickerz-]

i am loving that bike ha well i have for a long time now anyways. I'm having trouble with mine do you know where to get the carb slide guides reliably. its near impossible to find anything for the bdst36 carbs. i ordered a set from nrp carbs a month ago but they still have yet to ship. and ive found another part number N198020 and that says it fits rf900 but the info says its for a bst33 carb so i haven't tried yet

[@Adikxx]

Hi buddy, i ordered my guides from NRP too and they arrived within a week. I know of a few people who also ordered from they and all arrived. Factory pro sells plated emulsion tubes which last longer. Worth buying.

[@Stickerz-]

@@Adikxx alright I guess I'll keep waiting for now thanks again. Yeah I have the plated emulsion tubes from factory pro as well as the factory pro jet kit with the new needles all I'm waiting on now are the guides but if you say nrp is good I'll take your word for it and keep waiting

[@Stickerz-]

@@Adikxx everything just got here today Going to put it all together tonight an see what she does

[@martinx8348]

Awsome work. I fisrt descoverd the RF900 engine back in early 2000s. I sourced a cheap RF900 bike for a Seven type kit car. All the common engines used like Hayabusa - Blade were too much money for me. This is when I descover the RF900 engine. It was so underated. I later upgrade to a ZX12R engine which is when I relised how good the old suzuki engine was. The ZX12R defernatley had more power, but I was not as big a change that I was expecting. My recent play is with a RF600 engine. The Idea was to use it in a small Jetboat, as with most thing has not gone as plan. This engine has been modded to run DIY fuel injection. Hope you do not mine the link. KZbin kzbin.info-IwzEPXcB5Y

[@Adikxx]

That is pretty cool what you're doing with the 600 engine. I always wanted to go FI on my RF cause carbs are just such pain in the butt in terms of maintenance.

[@martinx8348]

My RF900 engine in my Seven Kitcar was also converted to EFI (Megasquirt) using GSXR600 K1/K2 throttle bodies. I you ever give it a try, do not hesitate to ask. I have kept most of the info I used including the megasuirt files.

[@Adikxx]

@@martinx8348 you know what? I'd love to go FI so if you don't mind me asking dor detailed info i'd appreciate it.