How To STOP Annoying Door Swing POPPING... A Super HACK...

Fixing a car popping door check is easy. The snapping sound of a car door stop can get really irritating so we share how to fix the door stop once and for all.
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
***********************************************
If you would like to help us out.
www.paypal.me/...
***********************************************
USA Tools
(Good)
Bench Grinder amzn.to/2B2o64Y
(Better)
Bench Grinder amzn.to/2U4YXD7
1/4" Solid Steel Rod amzn.to/2HFzpXb
Spin-Off Lubricant amzn.to/2WpNR9f
Digital Calipers amzn.to/2US2xxB
Air Die Grinder amzn.to/2HGXKvU
Electric Die Grinder amzn.to/2CEyjXH
Grinder Arbor & Cut-Off amzn.to/2HCyWFd
Vise Grips amzn.to/2JAakyJ
Door Check amzn.to/2UeiZeB
Synthetic Grease amzn.to/2TtqzNR
Paint Brushes amzn.to/2Cz3kMI
Ball Peen Hammer amzn.to/2WeNn5E
Small Hammer amzn.to/2YmWdAr
Venom amzn.to/2WmMvfw
___________________________________________
UK Tools
(Good)
Bench Grinder amzn.to/2YgKanX
1/4" Solid Steel Rod amzn.to/2JE4OLx
Digital Calipers amzn.to/2JCYrbx
Air Die Grinder amzn.to/2TtoJwk
Electric Die Grinder amzn.to/2Ttf351
Grinder Arbor & Wheels amzn.to/2U7MFtw
Door Check amzn.to/2TYq1Vd
Synthetic Grease amzn.to/2JE5pNh
Paint Brushes amzn.to/2JF1Vds
Ball Peen Hammer amzn.to/2JxMqUy
Small Hammer amzn.to/2TUGfPd
Venom amzn.to/2HCJ80t
___________________________________________
Germany Tools
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. BEFORE ATTEMPTING OUR METHODS MAKE SURE YOU CHECK WITH YOUR MANUFACTURER. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@SweetProjectCars]

Hello All of Our Great Subscribers! here is a video for you to load into your memory banks. This is to deal with the annoying Door Check Popping Sound. Also A big Shout out To "BOZ" for funding us through our PayPal funding :) Now Someday you can help someone or yourself by fixing once and for all a broken door check.

[@wba68]

Hello Mike, I hope your Sunday is going well. This is an awesome trick. I only wish I had seen this before I had bought a brand new one. I'll know better next time. Stay awesome my good friend. 👍😎👍 Brian, Rome Georgia

[@SweetProjectCars]

@Boz we fixed the name for you my friend :)

[@timforfar7608]

Mike is there a fix for the other hinge style? My 2009 Suburban LTZ drivers door pops really bad when closing from full open position.

[@SweetProjectCars]

Tim Forfar we just did a 2009 drivers door hinge as it is a real paint to replace it which you may have to do. what we did was look for the pin that was loose and snapping then we took and spot welded it on top with a miller wire welder and problem solved, any good mechanic can do this for much cheaper than replacing but as I mentioned you may have to

[@deficator750]

Mine was doing that then it actually snapped.

[@UNRELATIVE]

Greatest car tip ever! This worked so well that the check engine light went off...

[@SweetProjectCars]

Glad we could help! And how about that check engine light :) LOL Thanks for watching and sharing, hope you have a great week. mad Mike the hammer SPC

[@multiluxem2218]

This is a good idea! If u want an easier solution, u can get some dowel pins (M2, M3, etc. depending on the car), unbolt the two bolts securing the check link to the door jam, put the dowel pin in between, and bolt the check link back on. Also don't forget some lubrication. I used M2 pin which is small but enough to cure the snap noise on my car (I can probably go larger, but worried larger dowl pin may put too much stress on that pivot?) Only takes a couple minutes to do.

[@SweetProjectCars]

Thanks for watching and sharing, we always appreciate the input my friend, have a great day. mad Mike & team

[@williamdodd5113]

Oh my god thank you so much for posting, doing my daughters head in, getting in& out of car, adding doing my head in because I didn't know what was making noise, thank you.

[@SweetProjectCars]

Glad we could help william!! Thank you for watching and sharing, have a fantastic day my friend. mad Mike the hammer SPC

[@coreyposada]

Thank you for this simple fix. I thought I had a problem with just a single door but after inspecting the passenger side, I found the same thing happening. You were the first video I looked at and what a fantastic solution. Thanks again.

[@SweetProjectCars]

Glad it helped c0p! Thank you for watching and commenting, we really appreciate it. Hope you have a great day. mad Mike the hammer SPC

[@TimRRT1]

I did this and it's AMAZING! Now whenever I walk by the door I open it to not hear that awful noise! Thanks for the tip!

[@billymorgan7717]

Great tip. I had something like this happen to a door on my Mustang several years ago. A plastic door roller cracked and broke off. Dealership told me the door had to be removed from the car to fix it. I bought the part. It was like $1.50. I told the guy at the dealership I was going to cut the roller in half and drill a couple of holes and screw it back together and file the screws flush. He said it would never hold. I kept the car several years and it was still together when I sold it.

[@Monster33336]

Stealership. Stay away as long as possible.

[@boosted2.4_sky]

My wife's HHR does this... I'll be fixing it right away... Thank You SPC. ....👍

[@albertramirez5390]

This is why I put be this channel so much. Even if I don't have this problem or that car I'll still sit here and watch. Great mind at work.

[@yangosakurai7505]

Thank you for the noise warning before grinding. So many channels don't give a heads up before suddenly doing something extremely loud and leave you in for a rude awakening if wearing headphones 😅

[@SweetProjectCars]

Absolutely! Thank you for watching and for your comment my friend. Have a great day. mad Mike the hammer SPC

[@randalmorris2076]

GM has had a bad design on door hinges for ages. Good to know how to fix that!

[@sewj8046]

It doesn't stop with door hinges..lol.

[@jeritwilkening9920]

Awesome fix! All four doors on my girlfriend's equinox were starting to make this dreaded noise. Took 15 minutes to do all four doors and they couldn't be quieter! Thank you for the video!

[@SweetProjectCars]

Jerit So glad we could help you my friend thank you for sharing Mike’s week project cars

[@lambrinos]

Just did that on my 07 Chevy Equinox and it worked great! Thank you so much!

[@SweetProjectCars]

Awesome!! Glad we could help lambrinos! Thank you for watching and sharing your fantastic results, we really appreciate it, hope you have a great week my friend. mad Mike the hammer SPC

[@TMB-cv2bg]

This happened to my '96 Honda civic, could never figure out how to fix, thanks for the vid.

[@cocojo242]

My son loves that I am watching your videos because I am doing all the jobs on his car and he doesn’t have to.lol. Thank again for the Video and Channel. 👍

[@MrNicoe36cabrio]

Wow. You and Julio are the kings of tips&tricks Mike.

[@scottmartin6792]

All 4 doors on my 01 yukon xl do this, the new door checks are around 30-50 bucks each so thank you for saving me some money!

[@SweetProjectCars]

Our pleasure Scott! Thank you so much for watching and sharing, we really appreciate it, have a great day my friend. mad Mike the hammer SPC

[@benharrison1069]

I don't have this problem now, but I did on a previous car. I wish I had known this back then. That clicking is annoying! Thanks for sharing, Mike!

[@goodguygto]

And good morning to you too!!!, !!!SWEET PROJECT CARS!!!, you just made my morning!!! My neighbor three houses down has that exact same problem with his GM car!!! Now I can charge him!!!!! LOL

[@jeffreycramer3968]

Thanks for the sweeet help fixing that annoying door hinge clicking on my ‘03 Lexus sc430 for good. Thank you again. No more noise

[@SweetProjectCars]

Glad to help Jeffrey! Thank you for watching and sharing your stupendous results, we really appreciate it, hope you have a great week my friend. mad Mike the hammer SPC

[@fredwaters3420]

Fixed! Thank you! My Pontiac G8 had this problem and although a slightly different design, it worked! Annoying noise is gone!

[@SweetProjectCars]

Glad it helped Fred! Thank you for watching and sharing your great results, we really appreciate it. Hope you have a fantastic day my friend. mad Mike the hammer SPC

[@fredwaters3420]

@@SweetProjectCars You as well! Thanks again!

[@patrcrnn]

I was actually just shopping fo a new set of door chocks and came across this video. I'm going to give your technique a shot first. Thanks for the tip!

[@SweetProjectCars]

Absolutely Patrick! Thank you for watching and sharing, have a great day. mad Mike the hammer SPC

[@Mr2pint]

Yes these straps are expensive to replace new on any car I’ve had - well done good solution...

[@waynewalter1823]

Sweet! I bought a used HHR recently and this is annoying as heck. I took the door panel off and found that the strap has been replaced already but still clicks. I'll be doing this awesome hack today! Thank you!

[@SweetProjectCars]

Awesome Wayne! Thank you for watching and sharing, have a great week and all the best on your project my friend. mad Mike the hammer SPC

[@marke3864]

So followed you directions for the driver's door on my 2008 equinox ,after ten years of putting up with the noisy hinge it is silent as can be, just hope it lasts ! Thank you !!!!!

[@SweetProjectCars]

Glad it helped Mark! Thank you for watching and sharing your results, have a great day. mad Mike the hammer SPC

[@NazVick]

Brilliant Mike strikes again. Thank you bro. Have a wonderful Sunday.

[@JasonTylerRicci]

I was just looking at replacing mine. This little trick is great! Saves pulling door panels and, in my case, $40 for a pair

[@SweetProjectCars]

Absolutely! Thank you for watching and sharing, we really appreciate it, hope you have a great week and all the best on your project my friend. mad Mike the hammer SPC

[@WearthH]

Excellent vid, thanks for the tip. That noise was driving me batty. All better now!

[@SweetProjectCars]

Great to hear!! Glad we could help! Thank you for the view and for sharing your results, we really appreciate it, have a fantastic weekend my friend. mad Mike the hammer SPC

[@clanrobertson7200]

Very nice trick. I have been a Volvo owner for 52 years. And I have let you know that I grew up working with my father at his Gulf stations. When we did a lube and oil change, we vacuumed the car and treated the door hinges and “detention” hinge with a paraffin based lubricant called door ease sold at NAPA stores. It is in stick form that slides up as needed and capped with a tin cap. I have a stick that is at least 30 years old and still using it on my Volvo’s. I will comment that the detent that you show is a really poor design. Volvo uses a steel spring with two rollers that sound like something breaking when they need lubricant. You can stop the noise with any spray lubricant (but it will be back soon) or with wheel bearing grease (which won’t make it through the hot times of the year down south here) but will need lubricating by the next spring. But the Door Ease may last several seasons. If people lubricated the door hinges and detent regularly, they would put you out of business on this repair. The old professor

[@waterheaterservices]

Volvos and old professors just go together.

[@jeremyedgell9989]

So glad i subscribed years ago to this channel it is beyond amazing!! Hands down one of the best channels out there!!!!! 👍😁💯💯💯💯💯💯

[@SweetProjectCars]

Glad to help Jeremy! Thank you so much for the view and comment, it really makes all we do worth it, hope you have a stupendous weekend my friend. mad Mike the hammer SPC

[@cassaundra6010]

You should have over a million subs you guys are great!!

[@SweetProjectCars]

Thank you very much Riley that means a lot to us

[@DanielMiranda-uc3vu]

Thank you for the video. I followed each step to a successful repair. I did have to put a flat side on the metal rod in order to insert the rod because I could not hammer it in.

[@SweetProjectCars]

Awesome Daniel! Thank you for sharing, we appreciate it. Happy New Year my friend. mad Mike the hammer SPC

[@frankziccarelli1724]

Sweeeeeeeet tip SPC! It just so happens I need repair for a car next week! You just saved me a ton of time ! Thank you, thank you, thank you! Timing is everything! Have a great week!

[@David-yh5po]

Thanks for sharing this video with us. I like your way a lot better than the rest.

[@SweetProjectCars]

Glad we can help David! Thank you for watching and commenting, hope you have a great day my friend. mad Mike

[@pureacid4550]

Wow I'm glad I came across this video, I have 4 of them to fix. Thank you

[@SweetProjectCars]

You are welcome! Thank you for watching and sharing, hope you have a great week my friend and all the best on your project. mad Mike the hammer SPC

[@trevormoore4198]

Dam... that's awesome... nothing drives me more crazy than that clunking on my f150..

[@SweetProjectCars]

Glad to help Trevor! Thank you for watching and sharing, have a great evening my friend. mad Mike the hammer SPC

[@Kissy-Suzuki]

I have a 2008 Lexus RX350/passenger side, that is doing this. I will have to try this, but i don't have all the equipment that you have, guess i'll have to get creative! lol ....Thanks for the help!

[@SweetProjectCars]

You can do the job, it's fairly simple, but if you are going to be a DIYer, it's key to have a few tools, just pick them up as you can afford, it will save you $$ in the long run. Thanks for watching and for your comment. Have a great day. mad Mike the hammer SPC

[@Adam-oo7tn]

i also have a Lexus- a 2012 CT200h hatchback. the passenger door is doing it too. i really don’t want to take it to the dealer either they quoted me like 600 to replace the entire assembly. what a waste! i will try to do it myself as well

[@tonyscang]

Thank you sweet Sir......great one as usual.......have a great day ahead

[@kylemlm]

Great video Sir..Wow.. I guess my Dad was correct, telling us kids "do not slam the doors" . My Dad later schooled me on how close the hood and the trunk....

[@nelsondesdepuertorico3779]

***MY MAN, IF I KNEW IT THIS EXTRAORDINARY IDEA A CENTURY AGO........UFFF......MY MAN***

[@Pi-Photo]

Thanks for pointing me in the right direction! 👍👍On my Kalos/Aveo it was the two bolts on the door side that was loose and needed to be tightened. But be careful tightening those bolts. It felt like those stamped sheet metal nuts on the inside of the door, or plastic. 😔😔

[@SweetProjectCars]

Glad we could help Pelle! Thank you for watching and sharing, we truly appreciate it, hope you have a fantastic day my friend. mad Mike the hammer SPC

[@coolissimo69]

Very nice and simple fix only in Sweet Project Cars.

[@gillgetter3004]

About to drive me nuts, replaced twice tired of it!! Gonna do this👍

[@SweetProjectCars]

It works well Gill Getter! Glad we could help! Thank you for the view and comment, have a fantastic day my friend. mad Mike the hammer SPC

[@RonConsumer]

That's a really cool hack NEVER EVER thought about doing that... thanks now I will never have to replace that damn thing on my friends GM products... GREAT video... 👍👍👍👍👍

[@SpitSharp]

Thanks Bro, it's always good to learn something new.

[@cassiejvance7496]

Always fun to watch and always neat and cheap.I'm a lifer subscriber lol. Please don't ever stop the video's my friend Sweeeeet 🔧🔧🔧💡💡👍👍👍👍

[@williamtucker2738]

Liked the video. Have a Saturn with the same problem. Thanks so much!

[@SweetProjectCars]

Our pleasure to help, William! Thank you for watching and sharing, we truly appreciate it, have a great week my friend. mad Mike the hammer SPC

[@Kaufeetimevideo]

Hey, did I heard the door squeak? Uh no, just a mouse! Great job thanks for sharing.

[@shawnlowder9810]

THANK YOU!!! My jeep door is in for this fix ASAP!!!👃👃

[@SweetProjectCars]

Glad to help, you will love the result! Thanks for being here with us. Have a great day. mad Mike the hammer SPC

[@_1ben]

well, i am going to try your method as the door stap is 70 bucks and my quarter inch drill bit is very inexpensive , thank you for your knowledge

[@SweetProjectCars]

Hello Berry follow the video to a T and you will have great success glad we could help have an awesome day Mike sweet project cars

[@_1ben]

@@SweetProjectCars update, my strap did not allow me to follow your instructions exactly, I had no room to slide the shank with a hammer, so I loosened the 10mm bolts used an Allen wrench to somewhat hit with a hammer , got it to seat, tightened the 10mm bolts and jebs a millionaire, I can not thank you enough, would buy you a cocktail if I wasn't a cheap guy, thank you again.

[@stevenkerwin4041]

@@_1ben Your comment really helped. Got the piece clamped in there rather than forced in.

[@garylandry2638]

GREAT FIX THANK YOU !! I JUST BEGIN ,.TO TRY FIXING THAT ANNOYING CLICKING IN MY DRIVERS DOOR , REAL GOOD COMMON SENSE THINKING !! ....{! BYE .BYE CLICKING NOISE }!

[@SweetProjectCars]

Glad we could help, Gary! Thank you for watching and sharing, we really appreciate it, have a fantastic week and all the best on your project. mad Mike the hammer SPC

[@mistagunther8569]

Same issue on my 2019 Peterbilt 579 rig. Thank you!!!

[@SweetProjectCars]

Our pleasure my friend! Thank you for watching and sharing, we appreciate it. Have a fantastic day. mad Mike the hammer SPC

[@grassroot011]

ha, got this same exact problem with my '93 Chrysler Eagle vision, Been doing this for a good while. Couldn't figure out how to remedy. thanks

[@claudenoto5137]

Chevy dropped the ball and you came up with an easy fix.

[@michaeljorcutt3142]

After reading all the comments, it’s not a Chevy thing. A lot of manufacturers “dropped the ball”

[@motanel]

Thank you 😊boss. I save some money 💰

[@SweetProjectCars]

Thank you my friend, it's our pleasure to help! Hope you have a fantastic day, thanks for watching. mad Mike the hammer SPC

[@prodigyFILMS]

finally i got some answers to my problem. thankyou for sharing this tips 🤙🤙🤙 more power to you and please share more tips godbless

[@SweetProjectCars]

Absolutely, it's our pleasure! Thank you for watching, we have over 700 videos on our channel for more tips & tricks, check it out my friend. Have a great week, God bless. mad Mike the hammer SPC

[@Hiker97]

My 2003 Dodge Grand Caravan drivers door does this for a couple years and it's been driving me crazing. I was about to pull the door apart and replace an expensive part that looks like isn't the problem. I'm without a grinding wheel but will try to fashion a pin without one and try your fix.

[@SweetProjectCars]

Give it a shot, you've got nothing to lose my friend. Thank you for watching and sharing, have a great week and all the best on your project. mad Mike the hammer SPC

[@BattleOfBowties]

Great info this noise was driving me crazy!

[@SweetProjectCars]

Glad we could help! Thank you for watching and sharing, have a great New Year my friend. mad Mike the hammer SPC

[@Yahoomediaclub]

Brilliant...mine is doing my head in, Thanks

[@SweetProjectCars]

Glad to help Jono! Thank you for watching and sharing, we appreciate it, have a great day my friend. mad Mike the hammer SPC

[@steve60870]

Great a guy who works like I do!!!!

[@SweetProjectCars]

Thank you very much Steve! We appreciate great subscribers like you and your appreciation of hard work! Have a great day my friend. mad Mike the hammer SPC

[@donaldhebert3395]

Thanks for the video i just fix mine on my impala. But i fixed it with a flat piece of metal.

[@SweetProjectCars]

don you are welcome and glad you got it fixed my friend

[@vaughnwesterby5162]

Now that you showed us the detent fix for the door, what is the best door hinge lubricant?

[@SweetProjectCars]

This stuff here tinyurl.com/bdf6a6ky it only takes 1 to 2 drops, it's amazing and all we use now. If you live in the USA and would like a free sample of this amazing lubricant, let us know. Just send us your name and mailing address to [e-mail] we will send you a sample, no charge and no strings attached. Thanks for watching and asking, have a great week Vaughn.

[@Swaptracker1]

Great video👍

[@SweetProjectCars]

Glad you enjoyed Rushane! Thank you for watching and commenting, have a great day my friend. mad Mike the hammer SPC

[@condoguy810]

Great Video!!

[@SweetProjectCars]

Glad to help, Condo Guy! Thank you for watching and sharing, hope you have a great week my friend. mad Mike the hammer SPC

[@JoniK1]

Never thought of that, I have to try it 😊👍

[@kblr2028]

Thank you so much just got a ford transit does this on both doors

[@SweetProjectCars]

Our pleasure! Thank you for watching and sharing, we appreciate it. Have a great day. mad Mike the hammer SPC

[@syedullah613]

Tip, I use a long pop rivet, it takes 10 seconds. Happy Fixing!

[@SweetProjectCars]

Thank you for sharing and watching Syed. Have a great day. mad Mike the hammer SPC

[@syedullah613]

@@SweetProjectCars No Thank you for guys like you that know how to use a camera! And your contribution to society.

[@michaeljorcutt3142]

What size Pop Rivet did you use syed? Thanks in advance.

[@jstyl3z]

Did we ever get a size if the pop rivet?

[@jamesledyard5192]

What a great idea another reason why I love this channel ❤️

[@reaperasylum2163]

My style on my cavalier are broke and one of the 4 doors don't open but aye I don't care it's a work car. That is a pretty neat little trick though

[@israelsanchez517]

Thank you so much you're the man!

[@SweetProjectCars]

Happy to help! Thank you for watching and sharing, hope you have a great week Israel. mad Mike

[@richrap84]

Great tip, thanks!

[@SweetProjectCars]

Glad it was helpful Rich! Thank you for watching and sharing, have a great weekend my friend. mad Mike the hammer SPC

[@Leonardokite]

Wow Mike that was awesome and intense. Brought back memories of your jackhammer days LOL ha ha ha 4:44 (not magnum) ......looks like time for some 303 on that rubber Captn'!! I'm getting trained in the ways!

[@mcconn746]

Great video. I have a 2004 Sienna in which the door check mounting bracket in the door broke off. Any suggestions??? I bought a new door check but I can't mount it. Thanks.

[@SweetProjectCars]

You've got to find a way to get it mounted, you may have to take it to a body shop, but you have to get it mounted. Thanks for watching and asking, have a great weekend. mad Mike

[@Onedrank]

👏👏👏👏 Awesome!

[@rwmagnus]

Love it Mr. McGiver.

[@jbocaneg17611]

Brilliant! Thank you

[@SweetProjectCars]

Glad you liked it! Thank you for the view and comment, we truly appreciate it my friend, hope you have a fantastic day. mad Mike the hammer SPC

[@midninteranger4315]

Your the man 👍

[@rapideye85]

Yes, I have an equinox and I hate it....the replaceables are expensive. I like the car overall. Great car, but it has a lot of cheap stuff.

[@jasonpanto]

Lol it's $40 for the part oem from gm $20 for a dorman

[@nyinfamous2k2]

HOLY SHIT, I just used your mothers polish technique on my boat today. It came out amazing. mothers DESTROYED the other two boat specific polish/compounds results that I have. I will never use anything else. its so much easier to work with too. Damn your the man , Thanks brother. after wet sanding the entire boat, I used it with a wool cutting pad and mothers. I think I might hit it again with the 3m yellow polishing pad. would you recommend I use mothers again fir a final polish or something finer?

[@SweetProjectCars]

RicWorks247 use the mothers to final polish then use this by hand amzn.to/2YplIRh and then look out brother it will be amazing

[@tommynguyen5075]

Good help! Thank you Sir.

[@patrickmckeown3683]

Thank you, thank you, thank you! I can do that.

[@SweetProjectCars]

You're so welcome! Glad we could help you! Have a great day. mad Mike the hammer SPC

[@damonsmith7297]

Sweeeet! I'll be fixing three doors shortly.

[@MyGuyKirby]

That really is annoying, glad to know how to fix but glad I do not own a Chevrolet

[@aggelfarmag5887]

Hi i have the same problem with opel astra h. The problem is at the gray part or the black one? The problem is that is broken( cracked?) or the gap when its open ? Because I can't go to a mechanic for a few days to fix it .a bigger problem may arise and the door may get stuck or remain open? Thank you very much

[@SweetProjectCars]

Look up your car online and just replace it, your best bet is to do that because it sounds like yours is broken beyond repair so just replace it with new. Hope this helps, have a great day and all the best on your project. mad Mike the hammer SPC

[@marke3864]

Could you use the bottom of a 1/4 nail instead and just cut into a 1/2 inch length?

[@SweetProjectCars]

Please follow the video to a T, there is no other alternative, use the exact same tools, products and method, we've spent years perfecting this process. Thanks for watching and asking, have a great week. mad Mike the hammer SPC

[@williancarvalho241]

Amazing job Lol Very veru very good

[@SweetProjectCars]

We're glad you like it, our pleasure Willian. Thank you for watching and commenting. Have a great day. mad Mike the hammer SPC

[@georgemyers6518]

Cool trick. I like it

[@TheCowgirlNiamh]

Great fix!

[@TNTpresentations]

I don’t have a bench grinder is there something else I can use ?

[@SweetProjectCars]

Use this amzn.to/3n1LXuV Thanks for watching and asking, have a great day my friend. mad Mike the hammer SPC

[@jamesb1988]

Awesome fix but I think this might be limited to mostly GM/Chevys... cause this is happening to my Ford F-250 but instead of the base piece being cracked the sound is caused by two divets in the black arm part. Still enjoyed watching video though :)

[@SweetProjectCars]

Thanks for watching and sharing James, have a great week my friend. mad Mike the hammer SPC

[@ranacherian]

Hello, I have question. I have a camry that I applied the door check with some fluid film and now it swings open with no resistance. I tried to clean it off with brake clean and it didn't work. any suggestion?

[@SweetProjectCars]

Mazda Speed the fluid film will be very hard to remove the best thing you can do is get some of this amzn.to/2CF71jQ it is the only thing we found that will work and spray it every day as deep into the door check as you can and it will eventually dry up and work again you only need a few squirts everyday

[@mikeb6418]

Hello Mike Excellent video. How the hell did you (and Julio) figure this one out. If we didn’t have you to show us this we would be paying big $$$ at the dealer. Thanks again my friends or taking the time to show us ur tricks of the trade !!

[@SweetProjectCars]

big Mike Borghese you are very welcome my friend :)

[@waterheaterservices]

You are the best

[@brandontranchon8302]

Is there anything else you can buy that is similar & ready to use that you can think of? Asking as I do not have access to tools used in the video

[@SweetProjectCars]

Hey Brandon, our videos are very tool/product specific, we recommend using what is shown for success. Let us know if we can help. Thanks for asking and watching my friend. mad Mike the hammer SPC

[@BettyKent-n9r]

Have this problem with Mercedes 2004 c240 4matic i replaced it and omg it still doing it. Terrible getting it in the door will 5his work on my vehicle? Thank you

[@lawrencewheeler8868]

Mae West said," I was white as snow, but I drifted.(punch)

[@808breaksbad.]

So it's a matter of "wedging" something solid between the door jam (via the back of the clamp) to prevent the door check arm from moving forward? Something's gotta bend to hold that tension, correct?

[@SweetProjectCars]

As you see in the video, it's a very simple process, just follow the video instructions. The door hinge is wearing out, we are making it last longer. Thanks for watching. Have a great day. mad Mike the hammer SPC

[@n3ro209]

Great tutorial! I just bought a 02 Honda Accord and when the doors are closed for a long time, (for example the passenger door is hardly ever opening), it seems like the weatherstrip around the door and the frame of the car are sticking to each other since the door is bit hard to pull. I wonder if it is actually the weather strip? It makes a mushy sound whenever I open the door and/or close it. I also have to close the door a bit harder than usual for it to close all the way. Doesn’t look to be crooked either, what do you think? Thanks!

[@SweetProjectCars]

n3ro209 i would spray 303 on all the seals my friend and grease the door check shafts

[@rhtball]

Nice tip...

[@SweetProjectCars]

Happy to help Rick! Thanks for watching and sharing, have a great week my friend. mad Mike the hammer SPC

[@TopHatGent]

Jeep JL and gladiators since 2018 have a similar sound..but from an inner door weld that breaks. Not so easy to fix...wish it was this

[@SweetProjectCars]

We feel your pain my friend. Thanks for watching and sharing, we appreciate it. Have a great day. mad Mike the hammer SPC