HOW To Repair a SAGGING HEADLINER....DO IT YOURSELF

We show you how to fix a sagging headliner. This method works every time and holds the liner up for years.
ALERT!!
THROW OUT your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
***********************************************
If you would like to help us out.
www.paypal.me/YourSweetProjec...
***********************************************
TOOLS USED:
USA
Correct Size Syringes
Here's the needles you need amzn.to/3eLP1e2
If you Don't want to use the sharpened needles, use these. You Have to Sharpen These with a File
amzn.to/2V5N5xQ
Contact Spray: amzn.to/3476btv
Hair Dryer amzn.to/2j3zWU4
Venom amzn.to/3PDMuQd
Wool Dauber amzn.to/2GAwj3b
Glue Gun Kit amzn.to/3iYHiYK
Twist Pins amzn.to/2HbuXwi
Razor Blades amzn.to/2zScrYd
Razor Blade Holder amzn.to/2iuik4f
Headliner Material amzn.to/3rbLL1y
1 Million Cologne amzn.to/3yRK3mE
_________________________________________
UK TOOLS
You Sharpen
Blunt Nose Needles amzn.to/2Jj5IsB
Contact Spray: amzn.to/3yoqzEv
Hair Dryer amzn.to/2GBHNHk
Venom Steel amzn.to/3f35bgA
Wool Dauber amzn.to/2E9yMDr
Glue Gun Kit amzn.to/2GYB5u5
Twist Pins amzn.to/2qbsjP5
Razor Blades amzn.to/2JlZjgl
Razor Blade Holder amzn.to/2EmV4NR
Headliner Material amzn.to/2qanTrX
______________________________________
Germany TOOLS:
Correct Size Syringes
you Sharpen
Blunt Nose Needles amzn.to/2GF0ENy
Contact Spray: amzn.to/2Hdlk07
Hair Dryer amzn.to/2EneKRS
Venom Steel amzn.to/2nSJZi4
Wool Dauber amzn.to/2JmX1xB
Glue Gun Kit amzn.to/2EmYDn2
Twist Pins amzn.to/2GCkZar
Razor Blades amzn.to/2q9147M
Razor Blade Holder amzn.to/2q7Oi9G
Headliner Material amzn.to/2He6CWO
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@SweetProjectCars]

***My friends here is the video on how to repair a sagging headliner. This process works and will save you many dollars if you do it yourself. Now always remember the only real and best method to fix a sagging headliner is to REPLACE IT...but this method will buy you some time to save your money and be able to have that done :)***

[@jerryhottinger3362]

Sweet Project Cars were a

[@SweetProjectCars]

Mabel lin thank you very much :)

[@TheCount101]

Sweet Project Cars any tips on getting a dealership car decal off?

[@SweetProjectCars]

H yes easy way use a heat gun and it will peal right off:)

[@MyLife-mh1pm]

Sweet Project Cars i watched that one to nice work

[@williamcharles9480]

I really appreciate your dedication to helping people with issues that may cost them a fortune to repair. I'm a mechanic of 50 years but I'm not a body or detail man. You've taught me many things and saved me a ton. Thanks so much.

[@SweetProjectCars]

William Thank You Very much and we have lots of DIY videos to help you save a boatload of money on your car also thank you for being an awesome subscriber

[@JohnnyStacks]

I feel like I’m 9 again with my dad yelling at me trying to show me how to do something

[@lori8966]

I'm so glad I found this one - saved me hundreds of dollars!

[@SweetProjectCars]

Thank you for the LOL. Glad to have you here with us. Have a great day. mad Mike the hammer SPC

[@SweetProjectCars]

Glad we could help, Lori! Have a great day. mad Mike the hammer SPC

[@muminiasty]

Lol I can't watch it now.

[@kcor4]

Damn, this comment hits home lol

[@thejasonkellett]

This was way over my head until you folks demonstrated the proper way to get it done!!!! OUTSTANDING VIDEO!

[@SweetProjectCars]

Tyler thank you very much my friend we truly appreciate your great comments

[@jeanbean1390]

I'm so glad I saw this. My truck's headliner is drooping along the front and I was going to just spray adhesive onto the drooping cloth and hope that I didn't get any on anything else......knowing perfectly well that I would. Now I'm going to get a dauber and eliminate the impending mess. Thanks so much!

[@Mrch33ky]

In college I inherited a pontiac station wagon where the headliner rode on my head. Got fed up and used heavy duty staples to put it back up and then used nail polish in a similar color to the headliner on the staples so they would blend in. Worked well enough for a college kid's car. Your method look much better. :)

[@SweetProjectCars]

Thanks for sharing! Thanks for being a great subscriber as well! Have a fantastic evening my friend. mad Mike the hammer SpC

[@toddsmith8816]

Just finished repairing the 4-5 sagging sections in my 2013 KIA Sorento. Your 'spray can and needle' method worked great ! Thanks for sharing this great video. TJS

[@SweetProjectCars]

Todd Smith good to hear that my friend glad we could help :)

[@MrRojas54]

How is it holding up? Thanks.

[@SomeGuyInSandy]

I needed this. Confirmed that the way I intended to fix my headliner will work! Thanks!

[@lindabeebe7065]

Yes! I’ve been waiting. But thank you most of all for being honest about the glue showing through. No other video that I’ve found talks about that.

[@SweetProjectCars]

Linda thank you very much we try to give the good and bad about every video we do our system will hold the headliner up and out-of-the-way but as I mentioned it will leave spots showing where you did glue there’s nothing you can do about that other than replacing the headliner thank you very much have a great day

[@harryl7946]

You people are just killin me here! These ideas are so simple and good, why didn’t I think of them already?!? Thanks for your vids. Pulled off all 5 tires from the Tacoma and scrubbed and treated with 303. Now I am good for another 5k miles. Doing the seals as well. All rubber and plastic under the hood as well. Thanks again!!!

[@SweetProjectCars]

Harry Pouncey you are very welcome my friend we are here to help great people like you and enjoy doing it :)

[@RENEGADEPETIE]

Awesome , my headliner is just starting to sag in 2 spots , small sags . It’s an older truck and not worth replacing the whole thing . This is exactly what I was looking for . $40 in materials and a good demonstration. Thank you .

[@SweetProjectCars]

This is exactly the video for you! Thank you very much for watching and sharing, have a fantastic day and all the best on your project my friend. mad Mike the hammer SPC

[@RENEGADEPETIE]

@@SweetProjectCars son of a gun … I just did this and it worked. The hardest part was getting the dang needle to stay on the nozzle , maybe I didn’t wait long enough to let it dry ….. anyways it worked , it is a tan interior so there was some bleed , like you said , but overall a success . My headliner is no longer sagging . Thanks again !!!

[@bourbonbacon]

3M Super 77 cans I bought on Amazon this week no longer have the little white tube on the nozzle. Any substitutes available that would work?

[@andrewthompsonuk1]

Followed your instructions and it worked. I am very happy with the results. The car is a 96 BMW which has a recess over back seat that had dropped out. I managed to remove some glue spots with glue remover solvent. Found that using quite a bit of glue remover would helped distribute the glue above for a more continuous coverage. It took me two attempts to get the syringe seal in the can properly. Another trick, I found one of those chargeable paint thinner spray cans that had the same top on it as the glue. Therefore I was able to clean out the syringe. So hopefully I will be able to re-use it. So thanks for the video. This has save me many hours it would take to remove the lining board and glue the complete thing.

[@SweetProjectCars]

Andrew Thompson thank you and we are glad it worked for you and thank you for sharing your real life tips on this process it helps the entire channel, my friend :)

[@alexandremaduro6042]

You are a wise Guy and not selfish. Is always sharing knowledge, I wish you ALL the best and god bless you man. Greetings from Brazil!

[@SweetProjectCars]

ALEXANDRE welcome from brazil !! and thank you very much, my friend, we truly appreciate your comment! :) Please share our channel that would really help us out !!

[@jiggidyjam]

Dude I thought I was pretty good at coming up with great ways to repair things but sir you have me beat by a mile. Very good video thank you

[@SweetProjectCars]

Glad to help! Thank you for watching and commenting, we truly appreciate it. Have a great weekend my friend. mad Mike the hammer SPC

[@spozz6633]

Once again you have saved my money from changing the headliners, I really appreciate the technique that is quite easy and I believe many people ignore it but you show here thank you very much .. I am very confident that many viewers will be grateful to you. I will continue to support you....millions thumbs up:)

[@SweetProjectCars]

Spozz Thank you very much my friend very glad we could help you and I love it when you stop bye

[@michaelgasperik4319]

Thank you! I've watched about 20 videos before this. I was looking for a way to fix a small "bubble" in the middle of my headliner, nowhere close to any edges. I really didn't want to pull the whole thing down for a 9 inch circle in the middle. This is the video I was looking for! Thanks again 👍

[@SweetProjectCars]

Michael Gasperik good deal glad we could help you my friend :)

[@ChrisPadillaAZ]

I love that you say, the glue is going to "set up"... I drives me batty when people say epoxy and hot glue are going to "dry".... Keep up the good work!!!!

[@SweetProjectCars]

Thank you Chris we try to do the best we can I’m sure there’s a few things we done our videos that have irritated a few people out there but at least here we nailed it have a great day my friend

[@jeanevans3580]

Chris Padilla May I ask the name of the spray?

[@zachh2776]

Great vid brotha, thanks for the tip....u saved tha day my man!!

[@adzy166]

I had same idea to use a needle but was trying to figure out how to get super glue in the syringe! Thank you Google and you. This is perfect !

[@SweetProjectCars]

Glad you found us! Thank you for watching and sharing, hope you have a fantastic day my friend. mad Mike & team

[@mlackey9812]

Kudos to you all you from a craftsman with decades of experience. Very, very good, common sense advice and instruction. Well Done!!

[@SweetProjectCars]

Thank you very much! We appreciate your comment. Have a great day. mad Mike the hammer SPC

[@brianb9299]

Brilliant! Because of you and your easy to follow videos I've gotten back a lot of the patience I had lost with doing car maintenance. THANK YOU!!

[@SweetProjectCars]

Brian B glad we could help ...thank you very much for your great comment we truly appreciate that :)

[@MrEyad1990]

Never seen anything like this before, great job really great usually when a headliner sag like that you would replace the whole thing , but this is great and works really good .

[@SweetProjectCars]

Eyad Jam thank you very much and it does work great :)

[@feyeteenbach5910]

I love your videos...I had tried the spray cement on my head liner...yeah...it's tan!! I didn't let it set up...and eventually it came down and sure enough...I can see the glue. I wish I had seen this video first!

[@40seando]

Thanks for the videos. I really appreciate the extra effort you take in hyper linking to all the supplies you reference.

[@SweetProjectCars]

Very welcome Sean glad we could help

[@foxiedoggy3292]

A very good explanation and detailed so there are no reasons for a mistake. Thank you!

[@SweetProjectCars]

Foxie Doggy thank you very much, my friend, we truly appreciate your comment! :) Please share our channel that would really help us out !!

[@achillies40]

AWESOME. My friends car needs the headliner fixing. She was going to have it replaced. I’ll do this for her. Thank you.

[@SweetProjectCars]

achillies40 she will love you for doing it my friend and thank you :)

[@one87rct]

I was an instructor in the military Your as good as me love it

[@SweetProjectCars]

Thank you very much, that's a great compliment my friend, we truly appreciate the view and thank you for your service, it's appreciated more than you probably know. Have a fantastic week Mr G berg. mad Mike the hammer SPC

[@landapanda1]

You.... sir.... are a GENIUS!!!!!!!!!!!!! thank u for this vid I just may be able to pull this off!!

[@SweetProjectCars]

landapanda1 you can do it for sure and thanks for the great comments :)

[@mindthependulum6245]

I'm really glad I found this channel. Tons of cool tips. I may not agree with everything I see on every video, but I certainly respect the experience of the man doing this. I wonder, are you a general mechanic, auto body or detail shop? I know shops can be a bit if everything, but in specific I'm curious. I retired from auto body in 2002 and we did tons of wild stuff with cars and trucks, and I've learned some odd tricks over the years. We were doing headlight polishing before there were kits made for it. It always gave the customer a wow factor when they had a fender bender needing repair, only to get the car back with headlights that looked new again, but had no extra charge for the service. We did that for returning customers and folks that weren't a huge pita to deal with. I guess I could say it's always wise to be kind to your mechanic!

[@andyroid5028]

So this guy will 'favorite' your comment, but won't bother replying to your questions? 👎

[@Rickandmorty_com]

@@andyroid5028 probably don't even read them before giving the heart

[@gvc56100]

Great job explaining and showing how to get this done properly and the pitfalls that so many omit telling...

[@SweetProjectCars]

Guy Mooglie thank you very much for your great comment we truly appreciate that :)

[@Jyroxxnrolls]

Thanks for sharing..... Time to get busy. I've been staring at a full can of adhesive and the sagging leading edge of my headliner for about a year.

[@SweetProjectCars]

Jerry.Rigged thank you very much for your great comment :)

[@adam_1dizon121]

1 MILLION.. FTW.. LOVE THE VIDEOS THANX FOR SHARING YOUR SKILLS WITH ALL OF US WHO WATCH YOUR VIDEOS MUCH APPRECIATED

[@SweetProjectCars]

Adam Dizon thank you and you are very welcome my friend :)

[@NicolasDeWolfe]

Excellent! Just what I was looking for. This is a great method that doesn't involve staples.

[@SweetProjectCars]

Glad it was helpful! Thanks for the comment, we really appreciate it! Have a great day. mad Mike the hammer SPC

[@MissionFreiheit]

This video completely blew my mind. The time and effort you put into these videos to really explain what's going on, even creating a mock/model roof for it - that's just so awesome. Hey seriously: do you have PayPal or any other way where I could send you a small donation? It won't be too much, I'm not a rich man lol, but I want to support you and say thank you for all the valuable content you are creating for your subscribers. Greetings from Germany, my friend. PS: I'm wearing the exact same glasses, haha

[@SweetProjectCars]

Mario Super we truly thank you for your offer all very appreciated donations can be sent here www.paypal.me/YourSweetProjectCars thank you very much, my friend :)

[@360pack]

right, he puts so much time and effort into creating these quality videos to help people out. it always baffles me how some degenerates (17 as of now) give these videos a thumbs down.

[@SweetProjectCars]

360pack thank you very much my friend :)

[@Funtimes670]

I already had plans to replace the headliner but I wasn’t sure what to do with my cloth sun visors, but now I know!! Thanks!!

[@SweetProjectCars]

Okie Joe thank you very much for your great comment we truly appreciate that :)

[@t.p.7373]

Love the ingenuity!

[@nicomastrangelo1747]

I appreciate you keeping it 100 with us. Great instructional!

[@SweetProjectCars]

Always! Thanks for watching. Have a great day. mad Mike the hammer SPC

[@chickenwing4155]

Awesome video! I always enjoy your work, Thanks for the tips and tricks.

[@SweetProjectCars]

Chicken Wing thank you very much for your great comment we truly appreciate that :)

[@silvergrizzly316]

Sweeeeeeeeeeeet!!!! 👍 Brother, I knew u would get around to my problem, (sagging cloth @ windshield). 😁LOL! THANKS FOR THE TIP MY FRIEND!!! 👍👍👍 And as always Great video and GOD BLESS!!!

[@SweetProjectCars]

Hog Man thank you very much for your great comment we truly appreciate that and have an awesomely blessed day :)

[@andylong2239]

Great tips. I replaced my headliner in my truck with stretch denim once and it was fairly easy so don't be affraid to try replacing it completely if it's totatally shot. Love these videos!

[@SweetProjectCars]

Andy Long thank you very much for your great comments :)

[@patricklao3472]

This is genius and a great alternative to tearing out the entire headliner and replacing the fabric

[@nw8000]

My God I need to do this and you have provided the UK tool list! Good Job best auto channel on youtube :-)

[@SweetProjectCars]

nw8000 thank you very much for your great comments we truly appreciate that :)

[@jayc3110]

That was a terrific video. You explained all the steps really well... Thank you.

[@SweetProjectCars]

You're very welcome! Have a fantastic evening. mad Mike SPC

[@hazaelmurillo6638]

Thanks for sharing your knowledge with us Sr, I appreciate it. God bless

[@Craftsmansteve]

Genius idea on that spray can Mod !

[@SweetProjectCars]

Craftsmansteve thank you my friend we do appreciate that :)

[@CarynPao1]

Thank you, I was waiting for quite sometime! LOL Very helpful! The Texas heat is tough on our cars.

[@SweetProjectCars]

Very glad we could help we have such a list of videos it Will take us months to get done with them but we’re Trying 🤗

[@simonreeves2017]

You guys are just awesome! I took your technique and modified it slightly. Instead of glue, I used some clear silicon bathroom mastic, this has enough adhesion, but doesn’t stain the liner (if you go easy). I could attach a needle to the silicon tube to inject tiny amounts of silicon about 1inch apart, a decorating paint roller can help to even out the liner as you work from the adhered area towards the sagged area.

[@SweetProjectCars]

Thank you very much Simon, we really appreciate the view and comment my friend. Hope you have a fantastic weekend. mad Mike the hammer SPC

[@rajivsingh1999]

Hell yeah brother! this is awesome! My trucks headliner has both of these issues and i was dreading finding a better head liner for a 17 year old truck lol.. This looks easy enough! thanks a ton for the video!!!

[@SweetProjectCars]

Glad we could help, thanks for your comment and for watching! Have a great day my friend. mad Mike the hammer SPC

[@MyBandit4]

Brilliant!!! Going to try this method!!! Thanks for a great video!!! Happy New Years!!

[@bigbob3409]

Thanks again for another great vid👍

[@davemansfield8653]

That was awesome! Very helpful and detailed. Thank you!

[@SweetProjectCars]

Glad it was helpful Dave! Thank you for watching and for the comment, we really appreciate it, hope you have a great day. mad Mike the hammer SPC

[@jimbola77]

thank you, partner, for sharing!!! love all your work!!! God Bless.

[@SweetProjectCars]

Thank you very much Jim we truly appreciate that my friend have a great day

[@dukenukembubblegum7311]

Wow, this is a genius idea. Seems to easy, and why would I never think of this

[@SweetProjectCars]

Thank you very much Nick, we appreciate the view and comment my friend. Have a great weekend. mad Mike the hammer SPC

[@FanoFinz]

Been waiting on this one for a while. Can't wait to fix my headliner now. Thanks!!

[@SweetProjectCars]

Brad glad we could help and we say just enjoy the process and take your time :)

[@FanoFinz]

Will do! I will let you know how it turns out. Thanks again!!

[@rayjones3212]

My wife's car has a tan headliner and no foam on the back and I don't see any problem with doing what you've suggested for the front of the headliner where it is falling away from the windshield. I'm fairly certain that she'd be happy to have me do this for her. Thanks for the instructions, Mike. Cheers from Indy ;)

[@SweetProjectCars]

Ray Jones us this amzn.to/2YmseIM on a few Q-tips and you are done, my friend

[@2-old-Forthischet]

My headliner (light grey thin cloth) on my Chevy Express van started peeling away at the windshield last year while on the road towing my travel trailer. I stopped at a hardware store and bought some spray contact glue and applied it. It held up until this month and started peeling away again. My GF suggested contact glue used for sewing materials. I tried that a few days ago and although messy, it did a nice job of holding the edge of the headliner up. Only time will tell if it lasts.

[@SweetProjectCars]

Good job way to be creative glad to hear you’re conquering the headliner issues they can be real troublesome sometimes

[@vinfish4697]

Genius idea and well explained

[@SweetProjectCars]

Vinfish F thank you very much we do appreciate that great comment :)

[@vinfish4697]

Sweet Project Cars until now I had no idea how to get the glue on the inside without taking off the trim Thx again for sharing

[@einsteincasino8539]

Great Video! Very cool! I had a crossfire where the headline started drooping like this. I ENDED UP SELLING IT! 😆😆😆

[@SweetProjectCars]

Einstein I’m with you on that a sagging headliner Can be very frustrating as I’ve always said the only way to really fix it correctly is to replace it.

[@coolissimo69]

Look who is here my favorite car show, thanks my friend

[@SweetProjectCars]

Coolissim0 Unl1mited thank you very much as always we love it when you stop by :)

[@chancewhite5092]

Absolutely nothing short of genius!! Wow

[@SweetProjectCars]

Glad you like it Chance! Thank you for watching and sharing, have a great day my friend. mad Mike the hammer SPC

[@dknight211]

This is actually pretty clever. Subscribed!

[@SweetProjectCars]

Thank You very much we appreciate that we do three videos every week one of them is a review on different tools and products but we focus on helping the DIYer with cool affordable tips and tricks glad to have you with us

[@Kingdonnerkebab]

How you think of the things you come up with still astounds me Mike. Another excellent vid.

[@SweetProjectCars]

Thank you tuddie we have been at it for a long time and we’re just letting the cat out of the bag and hopefully it helps others out there thank you so much

[@RonConsumer]

Holy moly... I which I had this video 5 years ago it would have saved me a boatload of money rather than replacing the whole headliner where there was just a piece that had become detached... Well, now I know how to fix this if it ever happens again... Thanks for making this video.

[@SweetProjectCars]

Thank you very much Ron and you are correct this is a great way to repair a headliner without having to completely replace it have a great day my friend

[@BrownBessOwner]

How much did it cost to get it done professionally?

[@RonConsumer]

$875 but as I stated that was 5 years ago and 3 cars ago. They removed the whole panel and replaced the whole thing.

[@Adigaalbrz]

Thank you for the great video

[@crpruns69]

I tried this and it worked great!!! Thanks saved a ton compared to a complete teardown and build-back!

[@SweetProjectCars]

Glad we could help my friend!! Thank you so much for watching and sharing your spectacular results, hope you have a great rest of your week. mad Mike the hammer SPC

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@josepeixoto3384]

Luxury cars always develop sagging headliners; cheap cars tend to have them perfect for ever. edit Nice video, *lots* of good ideas there, thanks.

[@SweetProjectCars]

Thanks! 👍 Glad you liked it my friend. Have a great day. mad Mike the hammer SPC

[@drwatson1234]

What a smart idea!

[@dennisneo1608]

Sweet Project Cars led me here. :D

[@MuhammadTayyab-iv4rd]

Thank you sir...you always amaze me with your skill and technique....really appreciate your time and efforts......much thank again..n God bless...

[@SweetProjectCars]

Thank you Muhammed We truly appreciate that

[@grantp4022]

I think your videos are all fantastic, and I enjoy watching them. I especially liked the ones on how to refurbish old dirty cracked leather car seats. I must say, truly amazing, and I'll have to try that. Kind of looks to good, and easy to be true, but it looks authentic. I would say though on this "headliner" video, you should explain to viewers what causes these headliners to sag. If you don't, your repairing it for nothing as it will soon sag again. You firstly have to get to the "root" of the problem that's causing the headliner to sag, and that's usually caused by a small water leak, that over time, breaks down the adhesive holding the liner up. I'll post an "example" of what happened to me, regarding this problem What caused my sagging headliner was this - on the "outside" of the car, right at the top of the front windshield, is a long chrome banding piece that hold a rubber seal in place. It had come loose, causing "water" to slowly leak in over time. The headliner "inside" started to droop from the very top front, up by the windshield, and spread to the middle, then the back. It was an 86 Buick Park Avenue, and this happened in the year 2000. I took it to an upholstery place, and they told me to get the "cause" of the problem fixed (water leak) before they would replace it, with a new headliner, as it would be a waste of money and happen again. Makes sense right !!! I took it to an auto body shop, and they had some special strong adhesive, and I believe it was poly eurathane. They put some of this eurathane on the rubber, and put the long chrome holder back over the rubber, and put a weight on it for 4-5 hours to let the eurathane adhesive set up. This fixed the problem. I then took it back to the upholstery place, and they put in a new headliner. There was no more problems, and no leaking of water anymore. If your problem is caused by water--which I would estimate 95 % are then get the water leak fixed. You will also see very light water stains on your old liner, when you look up at it, when it's sagging--then you know it's a "water leak." Note-there is always anti-smoking fanatics, that blame smoking for a lot of different things that are just not true. So good new smokers--keep puffing away, and do so in peace, as it will not affect your car's interior headliner. The only thing you have to worry about is lung cancer, and yellow stained fingers :) Now these are "real" effects of smoking. I say this, as there was some guy that thought that cigarette smoke caused this- "no chance." His comment is below in the comment section, and also refuted by 3-4 other smokers, including myself.

[@SweetProjectCars]

Grant P thank you for sharing my friend :)

[@TheCheesecakedeath]

I thought it was from having the window down and smoking and air blowing in

[@lcshotta]

Right on time! Doing this to my vintage BMW tomorrow

[@SweetProjectCars]

Good deal glad we could help

[@wickedWarwickwarrior]

Sweet Video. Wicked good tips and tricks. A++ on what looks like the best class room demonstration before he actually shows it in application. This is a professor of the craft, so pay attention. Can't wait to summer to fix mine

[@SweetProjectCars]

Glad you liked it Peter! Thank you so much for watching and commenting, we truly appreciate it, hope you have a great week and all the best on your summer project my friend. mad Mike the hammer SPC

[@offroadhuasteca8576]

Es una idea brillante!....y te ahorra el doloroso proceso que estén manipulando los cobertores y cables internos, al desmontar el techo. La pongo en práctica y les dejo saber cómo me fue. Muchas gracias!!!!

[@scarface9389]

Como te fue?

[@jeanbean1390]

Also, my 303, mothers and buffing pads are supposed to be delivered today - I'm SO excited to fix the foggy tail lights on my '98 Chevy truck and the headlights on my '09 Camry

[@SweetProjectCars]

Jean Bean you will have fun and love the results :)

[@JL-wf2wp]

Thank you sooo much! Very ingenious way to do it!! Ride on brother!

[@SweetProjectCars]

My pleasure! Thanks for watching and for your comment, we really appreciate all of our great subscribers like you, makes all we do worth it! Have a fantastic day my friend. mad Mike the hammer SPC

[@laurajeanvalentine]

Great info, thanks

[@misterqmbebe6734]

Great video, thank you so much 👍🏾👌🏾

[@conantigard7348]

Gonna give this a try. Just ordered the materials. I will be working on my 1968 AMC Rebel SST 290. Fingers crossed.

[@SweetProjectCars]

Glad to hear! Thank you for watching and sharing, have a fantastic day and all the best on your project, you've got this! mad Mike

[@stavroskonstantinidis568]

Genius. My car saver!!! Thanks my friend!

[@SweetProjectCars]

Glad to help!! Thank you for watching and sharing, have a fantastic week my friend. mad Mike

[@Candoit2]

Really great info and video!! Thank you!!

[@SweetProjectCars]

Thank you Roddy we truly appreciate that my friend

[@Tim.McElheny]

Thanks for posting this! I just ordered the Syringe tops from your link! Thanks again!

[@SweetProjectCars]

tim you are very welcome

[@Tim.McElheny]

@@SweetProjectCars after going into Autozone to buy the M3 and looking at the nozzle; I noticed that it is not the same nozzle as in the video. The new nozzle is flat and rectangular and does not seem to detach. If I super glue the syringe onto this new nozzle will this process still work?

[@RayMacksKitchenandGrill]

*Great tips...*

[@SweetProjectCars]

Ray Mack's Kitchen and Grill thank you very much for your great comment we truly appreciate that :)

[@HUBBABUBBADOOPYDOOP]

¡Excelente consejo, señor SPC!

[@SweetProjectCars]

muchas gracias por tu gran comentario, realmente lo apreciamos LOL!

[@rickilynnwolfe8357]

Your a genious this is a great tip darlin thanks for sharring..God bless🙏💜

[@SweetProjectCars]

Ricki thank you very very much

[@lincolnthinking]

nice processes, thanks ~

[@ralphdunn409]

Great video just what I was looking for

[@SweetProjectCars]

Glad we could help Ralph! Thank you for watching and sharing, hope you have a great week my friend. mad Mike the hammer SPC

[@andrewhazenberg3398]

Thank you for this how to video. Very well explained. 👍🤗

[@SweetProjectCars]

Glad it was helpful! Thank you for watching and sharing, hope you have a great weekend my friend. mad Mike & team

[@ScrewballMcAdams]

Terrific video! Thank you.

[@SweetProjectCars]

Thank you screwball we truly appreciate that

[@olenaerhardt7725]

Thank you very much for this great film. It is just genius approach. I think that device you showed us should be patented. Many people would buy it gladly, something like a set of syringes w/needles filled w/that headliner glue. It would be very good temporary repair. I replaced the headliner in one of our cars one year ago. To strengthen the headliner I painted it several times w/Fiberglass Resin (Bondo), how I saw in one film, slightly sanded it, cleaned w/Isopropyl Alcohol, and then glued a new HL fabric to the HL w/Permatex 27828 Body Shop Heavy Duty Headliner Adhesive, High-Strength Spray Adhesive, Repair Detached Or Loose Interior Parts, Dries Clear, Aerosol Can, 16.75 Oz (fm/Amazon). I used 2 cans on a small passenger car, working fm/the center and everything how it should be done (I watched several films before). It was my 1st HL, so I did a mistake: I gave too much tension in one corner, so it barely stuck. But everything looked good, and of course much better then before. But after a year it saggs fm/many places, at the center as well. I might try this method before I put a new HL. I should say that it is very hard to work w/that glue, once 2 surfaces touch each other you can't pool them apart back, not like w/professional glue, when they spray fm/the bottle on the HL and then adjust the fabric by moving it back and forth. Can someone tell the name of that professional glue? I think the one I used is not so good. Thank you again.

[@SweetProjectCars]

Happy to help Olena! Thank you for watching and sharing, we really appreciate it, hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@matthewshambler2644]

Thank you very much for sharing this great technique! I’ll have a go at my father in-laws Land Rover soon;-)

[@SweetProjectCars]

Matthew Shambler thank you very much for your great comment we truly appreciate that :)

[@ScrapyCoco2012]

This is great, glad I can see the cutaway

[@SweetProjectCars]

Thanks have a great night mad Mike sweet project cars

[@thetraindriver01]

Really ingenious idea thanks 👍👍👍👍👍

[@SweetProjectCars]

thetraindriver01 thank you very much :)

[@charliepeeler1940]

This is awesome! Thanks for the tips!

[@SweetProjectCars]

Glad it was helpful! Our pleasure Charlie, thank you so much for watching, we really appreciate it. Have a great day my friend. mad Mike the hammer SPC

[@hbc865]

Thanks so much..worked on 2006 Mazda6

[@SweetProjectCars]

Good deal we are very glad to hear that thank you for sharing have an awesome night

[@kevinboynton9967]

Your methods are absolutely incredible! Every single thing that I have tried from your videos has worked, sir. You need to open up a detailing school. I have used at least 7 or 8 of you how to videos, and they were absolute truth as advertised. My favorite is fixing old cracked, faded and folded up leather seats with the paint, lacquer thinner and the rag. That is amazing! You are the best! :)

[@SweetProjectCars]

Thank you very much Kevin very glad we can help and very glad to have you here with us have a great day my friend

[@robertrager2691]

Going to try this on my 51 ford. THANKS !

[@SweetProjectCars]

Robert Rager you will love the results my friend :)

[@jbtwo1733]

Great video. Thanks for sharing!

[@SweetProjectCars]

Our pleasure! Thank you for watching and sharing, have a great week my friend. mad Mike the hammer SPC

[@paulbradford8240]

Thank you very much for the information.

[@SweetProjectCars]

Our pleasure Paul! Thank you for watching and commenting, have a fantastic day my friend. mad Mike the hammer SPC

[@tykellerman6384]

Great idea thanks

[@SweetProjectCars]

Ty Kellerman thank you very much :)

[@rudiruttger]

Awesome detailing pointers!

[@SweetProjectCars]

Glad you like them Rudi! Thank you so much for watching, we really appreciate it. Have a great day. mad Mike the hammer SPC