WHY Will a Good Mechanic Cost $400 to $800 For Ball Joint Repair?

This video is to share how to change a lower ball joint and to show that the average Joe can do it with just a couple tools and patience! amzn.to/4e3bCvV And we are not being paid to share this!
SEE Our New Channel / @butinski
___________________________________________________
See Hoolios DISCOUNT Tools #ad Below.. LOL!!
A Very Good Ball Joint Kit for the Money amzn.to/4gCdnSK
The Best Ball Joint Kit You Can Own amzn.to/3TFklfD
Best C-clip Tool amzn.to/3MSXZU7
Best Ball Peen Hammer amzn.to/3TGlfJ0
32MM Socket amzn.to/4ee07BX
Duck Bill Pliers amzn.to/47BLUMI
Bungee Cords amzn.to/3XTgz51
Awesome Work Cart amzn.to/3TCAi6o
Best Small Grease Gun amzn.to/4eATUjv
Best Shop Towels amzn.to/4euM0YM
Best Picks amzn.to/4eApZYH
Best Air Hammer amzn.to/3X9eKzl
Best Air Chisel Tools amzn.to/4cUhlTs
BEST PICKLE FORK EVER! amzn.to/4e3bCvV
Ball Joint and Tie Rod Kit amzn.to/4e0qStu
Pickle Fork Lube tinyurl.com/bd...
Ask us For a Free Sample of the Best Lubricant on the Planet tinyurl.com/bd...
Liquid Glove amzn.to/3w8iCqP
Best Large Wrench Set amzn.to/4di9wr0
Best Impact You Can Buy amzn.to/3QnIrKp
Liquid Gloves amzn.to/3XS4lcH
Best Head lamp amzn.to/3UpNdK4
Camera Used in Video amzn.to/3RfC5NM
THE BEST Ceramic Coating EVER... Period!! goo.gl/z9TrgR
To all our Great friends and Subs' We started a new unique channel that allows you to share your 2 cents on every issue and topic you can think of. / @butinski We want to know what you think about the topic of each video...don't hold back and share how you truly feel. NO COMMENT WILL BE REMOVED (Just no Linking or promoting Please) Make sure you subscribe so you can see what others think of your ideas and opinions.
1st New Video Kids • QUESTION! Are Parents...
2nd New Video Trucks • QUESTION! What is The ...
Thanks Mad Mike
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
1st Video in series • A Sweet NEW SERIES Cal...
2nd Video in series • How To Clean The Worst...
3rd Video in series • How To DETAIL Everythi...
4th Video in series • How To Strip The WORST...
5th Video in series • How To Easily Buff GLA...
6th Video in Series • STRONGEST Glue!!!! BE...
ALERT!!! THROW OUT your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd... We Guarantee you will love it.
For The Giveaway Channels to connect with so you can ask us for a free sample in our great free giveaway you can win on each channel
Our channels:
Sweet Project Cars
Mr Know It All
Sweet Scoots
Sweet Motor Homes
/ @butinski
*****Disclaimer*****Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@SweetProjectCars]

Hello and Good Morning to All our Great Subscribers! This video is to share how to change a lower ball joint and to show that the average Joe can do it with just a couple tools and patience! INNER TIE ROD VIDEO IS NEXT amzn.to/4e3bCvV and we are not being paid to share this! SEE Our New Channel www.youtube.com/@Butinski Quote of the Week! *When everything seems to be going against you, remember that the airplane takes off against the wind, not with it*

[@Pantherman1979]

Yea, working on non rusty cars is nice, I've had those forks for a few years now and can confirm that they do make the job allot easier than it would otherwise be.

[@SweetProjectCars]

Thanks for watching and sharing, have a great weekend my friend. mad Mike

[@bloominflowers6766]

The way you did this video Mike was great, Just shooting all footage at a little higher speed and then going back to explain later. I love your channel too because you do not feel the need to have loud MUSIC playing in the background to annoy all of your loyal viewers like other people. Great Job again Mike and I just ordered this tool and threw my old pickle forks into my scrap metal pile.

[@SweetProjectCars]

Thank you so much! We truly appreciate the view and kind comment my friend, makes all we do worth it, hope you have a fantastic day. mad Mike & team

[@Nico_335i_DCT]

thanks for sharing Mike.Have a great weekend, Dutch regards Nico.

[@SweetProjectCars]

Many Thanks Nico! Have a great week my friend. mad Mike & team

[@MichaelR58]

Good tutorial, thanks for sharing, YAH bless !

[@SweetProjectCars]

Thank you Michael! We always appreciate you being here with us, hope you have a stupendous week my friend. God Bless. mad Mike & team

[@brudug713]

The chisel Pickle Bar attachment is great

[@SweetProjectCars]

Glad you think so! Thanks for watching, have a sweeeeet weekend. mad Mike

[@adnacraigo6590]

Thanks for all the tips.

[@SweetProjectCars]

My pleasure Adna! Thank you for watching and commenting, it's always great to have you here, hope you have a fantastic weekend my friend. mad Mike

[@silvergrizzly316]

I have the same 5pc. Duratech ball joint separator kit and the IR air hammer listed in the show-more, I also have. Both are absolutely 💯% great purchases! 👍👍

[@SweetProjectCars]

Hey, WELCOME BACK!!! We sure have missed you, hope all is well my friend! Thanks as always for watching, you are right, they are great purchases! Hope you have a fantastic week Jay! mad Mike & team

[@FunWithCars716]

I dont use a pickle fork anymore because it rips the boot. A good swift knock on the knuckle where the tapered part of the ball joint goes through it comes right out😉

[@SweetProjectCars]

Thanks for watching and sharing, have a great week my friend. mad Mike & team

[@edwilderness]

Mike, I hope you and yours are doing okay with the hurricane! Looks like landfall is a bit east of Orlando, but I'm sure the rain and wind are horrific!

[@SweetProjectCars]

We were spared Ed, thanks for asking. We had a lot of wind, no rain on the west side of the storm. Now we are watching another storm rolling into FLA, again it looks to be south of us. Thank you for watching, hope you have a great week my friend. mad Mike & team

[@wolverine89893]

Hey Mad Mike thanks for showing us the tools and procedure for doing a Ball Joint Repair, Planet Safe is some amazing product. I have seen you doing the repairs on the Blue Bomber and you make it look easy with that product. Quick question how do you put planet safe grease in that grease zerk? Can you show use a quick tip video on that. Thanks for all you do and continue to do, I love all your videos that you put out they really help me. 😊

[@SweetProjectCars]

We'll see what we can do for you wolverine! Thank you for the view and for being a great subscriber, we truly appreciate it, hope you have a fantastic week my friend. mad Mike & team

[@christophersherratt7299]

Once the ball joint has popped I use a double nut then give it a good belt to put one back in I used a G Clamp in the USA 🇺🇸 you call it a C clamp don't know why because its a capital G when you look at it anyway I welded key ways to the clamp to fit different diameters tubes for other cars and I welded a 1 inch nut to the thread for impact driver pulls it up good with the grease

[@SweetProjectCars]

Thank you for watching and sharing Christopher, we really appreciate the input my friend, have a great day. mad Mike & team

[@phyllismulkey3778]

awesome

[@SweetProjectCars]

Glad you think so Phyllis! Thanks for watching as always, we appreciate you my friend, have a great day. mad Mike & team

[@peckerpeter2078]

Was this on the Blue bomber? If so it’s going to be like new now, can’t beat the mpg plus it’s paid for😂

[@SweetProjectCars]

Yes it's the Blue Bomber. It will be like new, and inexpensive repairs because parts for the bomber are cheap!! Thanks for watching and commenting, hope you have a fantastic week my friend. mad Mike & team

[@peckerpeter2078]

@@SweetProjectCars If you can fit a full sheet of 4ft x 8ft plywood in back flat.. it’s a keeper

[@bakgammon]

Can you make a video about debadging an older vehicle? have a '03 c240

[@SweetProjectCars]

We'll see what we can do for you my friend. Thanks for watching and asking, have a great day. mad Mike

[@bassthis]

Suggestion --- Put the ball joint in the freezer and take it just when your ready to install it.

[@SweetProjectCars]

Thanks for the view and comment, we really appreciate the input my friend, have a great week. mad Mike & team

[@2024marathoner]

Have a 1957 150 converting drums to disc. The lower control arms both have a pair of bolts smaller than the the other two? Do you know if this is what is on yours? all 8 are marked 6 times on the heads 4 measures 1" 6/8 and the other 4 measures 2" and 1/8? They appear original or should I replace?

[@christophersherratt7299]

I REALLY appreciate all the tips you have shown over the year's BUT HAVE YOU EVER FOUND A CONCOCTION TO CERAMIC COATING, I WOULD LOVE TO SEE IT AS YOU KNOW IT'S NOT CHEAP AND YOU ONLY GET A SMALL AMOUNT SOMTHING THAT MIGHT LAST COUPLE OF YEARS CHEERS

[@SweetProjectCars]

Nothing beats this goo.gl/z9TrgR wish we could create our own concoction, but that would take a real mad scientist other than Hoolio to create it :) LOL Thank you so much for watching and being a great subscriber, hope you have a fantastic week my friend. mad Mike & team

[@Leonardokite]

I guess you could say this was a "balls out" video..... 😱🤪😎

[@SweetProjectCars]

LOL, yes it is Leonard! :) Thanks for always being here and giving us a good laugh my friend, have a great weekend. mad Mike & team

[@foxiedogitchypaws7141]

I had new brake shoes, rotors, calipers and RE places the brake line, ratated the tires, one year ago why would cause the mild shaking going down hill pressing the brakes like when the rotors needs to be replaced? Brake booster? 2006 Town and country limited. 🤗

[@gregorystewart6539]

It is possible the caliper bolts are not tightened to spec. Check that first. It really needs to be tight.

[@FunWithCars716]

👈knows all about rusted cars😉. You couldn't take those bolts out by hand in a 4 year old car around here😢

[@SweetProjectCars]

LOL, I hear you buddy! Lived in Michigan my whole life until 4 years ago, rust is a horrible problem there! Thanks for watching and commenting, hope you have a fantastic week my friend. mad Mike & team

[@ChevyCitation]

Hey Guys And Gals It's "SA Weeeet" Project Cars Here With Cool Trick And Affordable Ways For The Do It "Yourselfer" And 👉Simple Ways

[@SweetProjectCars]

We always appreciate you buddy! You're hired!! LOL Thanks for watching, hope you have a sweeeeet week my friend. mad Mike