The Ultimate Fence Post Driver Shootout! US Hammer VS Rhino VS Redidriver

👉🏻 Check out the fence post drivers here: bit.ly/swidrivers
There's a new fence post driver in town! Time to put it to the test! Today we put the 3 top gas-powered fence post drivers into the ring for the ultimate fence post driver showdown.
Product questions? Need tools?
👉🏻 Check out the store: bit.ly/swifence
👉🏻 Call us at the shop and talk it over: 307-578-8040
👉🏻 Email us and get it off your chest: [e-mail]

[@wyo-chance9753]

Born and raised, north west wyoming. Not a fencer but have done lot's of fencing jobs , Pinedale, Bondurant, Jackson, Alpine. Love your guys content. Watch just to see some Wyomingites working in our great state. Thanks for the great content. (Even like the Florida content) :)

[@NoahDevine91]

Always enjoy and appreciate all the tests you guys perform on here. We use the rhinos, but I have heard good things about the us hammer, gonna have to give them a try. Hope you guys have a great dang day. Olsen Brothers for the win, happy fencing 💪🏻

[@MyFenceLifePodcast]

Great job man!!!!

[@Duke93720]

What about the man saver pneumatic post driver

[@barnes_specialty]

Will you compare one of the Aliexpress drivers that us mere peasants can afford? They have some 52cc ones for $250.

[@timothyjohnson7521]

Whats a good hammer for T pools. Bob wire fence.

[@joecarbone9435]

Gotta Try the Skidril stuff my crews used to use the rhinos and we switched everything to the two-stroke Skidrill G2XD

[@kubotajordan9502]

Nice post driver race . Where did y'all get those goggles they look cool , those might keep the Florida sand out of my eyes when mowing with a ZTR . thanks for sharing .

[@SWiFence]

Just for fun. I'm sure they're not OSHA approved. 🤣 auntmatildas.com/collections/goggles

[@newenglandman2413]

2:59. And this is how you invite my lame comments, Mark. 😆🤭

[@beachnut1300]

Looking forward to seeing that golf balls vs. vinyl video you seem to be hinting at with the clubs in the background. I have see a lot of swiss cheese vinyl on the the course in FL.

[@SWiFence]

Hey you're sharp! We filmed it and it'll be coming out sometime soon. 👍🏻

[@michaelwalker2091]

Question: Have you ever driven a r-post in a creek bed?

[@blh3741]

question.... I'll be flying out to NC to reinstall hurricane damaged 6' cedar fencing(HOA says wood). The soil is sand from what I know. What do you recommend for posts? I don't want to embed them with concrete(unless you say other wise) so I plan on U channel or round pipe and rent/buy a driver. Thanks in advance.

[@SWiFence]

I'd go with Postmasters all the way. If your soil's conducive I'd drive but you can concrete if you have to. _How Deep Do No Dig Fence Posts Have To Be?_ kzbin.info/www/bejne/o5ScY6asq6iFfNE _Testing The Absolute Strongest Fence Post Against Hurricane Winds_ kzbin.info/www/bejne/hZTVaGaCotRshZo

[@-S-K-Miller]

Video links? Good videos, funny guys, I'm learning a lot from you all.

[@SWiFence]

Links are always in the video description. ☝🏻 I'll add for you here as well. 👍🏻 bit.ly/swidrivers

[@user-tj7qp8dh3m]

Hello, I am a fence engineering contractor from Taiwan. We have our own team to produce fences and also have a construction team. I am very envious that you have so many convenient tools for use. I hope I can communicate with you and learn from you. Professional method

[@NicholasRachuna]

He wants to love you ling time!!

[@crazypeoplearoundtheworld304]

Get bent

[@KiKindred]

U guys are awesome! Also, what are those goggles?

[@wyo-chance9753]

I loved the goggles

[@SWiFence]

Just for fun. I'm sure they're not OSHA approved. 🤣 auntmatildas.com/collections/goggles

[@HAXMAN]

I too concur.

[@SWiFence]

I knew you would.

[@countrylawnsllc2211]

Have you tested the man saver post driver? I’m sure it’s probably a little slower but fatigue factor vs speed? I will be pipe fencing 23 acres and cross fencing multiple pastures and will be purchasing a post driver soon

[@SWiFence]

I've never used a Man Saver so I can't really comment on them.

[@JonsRanchFencing]

Mansaver works pretty well, just gotta waste time tripping over air compressor hose

[@JOA_Trades_]

Almost ready to commit to one of these but having a hard time getting the answer I need hopefully someone here can help. I live in Northeast Georgia where we have red clay. Wondering if this was a good idea in red clay? If anyone can help thank you.

[@SWiFence]

Here in Wyoming we pound in brown clay. 😁 Sorry--couldn't resist. Driving posts in clay is not a problem at all.

[@jordanmeeks4216]

Is it better to drive a post or set it in concrete after using a post hole auger?

[@stilltuckered]

Depends upon what/where you are doing it at. A farm field, concrete is usually cost prohibitive. Also, concrete may speed up rust when used on a metal post, by wicking moisture and never drying out; that’s why pouring them deep is so much better.

[@rusosure7]

Home is where you make it. Everybody no dat. - Joe Dirt

[@BlingB]

I tried to order your product but was told it not available, which is very unfortunate.

[@SWiFence]

That is unfortunate! I know we're dealing with some supplier issues. I'd encourage you to call the shop and get an estimate on availability. [phone]

[@poloruiz1267]

Make one using a demolition hammer

[@finallyfriday.]

Good video but one question- it's a real cloudy day and you're all wearing sunglasses on top of your hats. Purpose? Or are you fashion setters?

[@SWiFence]

We just tend not to go outside without them. Then if you don't need them they just end up on top of your hat...

[@finallyfriday.]

@@SWiFence Hmmm... I was thinking that was some type of Wyoming pimp daddy kind of thing. Me, when I want to be fashion cool I pull up my britches to cover my plumbers crack.

[@SWiFence]

🤣

[@RichardKinch]

Are there specs on these tools for joules/strike and strikes/minute? That's how demolition hammers are scientifically rated.

[@SWiFence]

No, afraid not.

[@stewatparkpark2933]

Your experiment is flawed because you are each assisting the hammers by pulling them down at an unknown pull down force that is not equal . Need to do it again allowing the tools to do all the work without any human assistance . None of them should need extra human pull down if they are any good .

[@sassafrasvalley1939]

Fellers… it’s nice that y’all found something that you could concur on. And that’s a good thing. Me and my two brothers have very few things that we ever concur on. Not on… -The weather. -Whose country bbq baby back ribs are best. -Which is cuter? A baby calf or baby pig. -Night crawlers or Red Wigglers for catching catfish. -Who filled a bra better? Linda Carter, Loni Anderson or Markie Post You know… the important things a man should take a stand on. But… we did have a bonding moment this spring. They came down on a Saturday… I was staking up my ‘maters. They were sitting on the glider in the shade, sipping tea and advising me on how much better they could drive in those T-post ‘mater stakes. Until I pulled out my post driver… The 3” diameter well pipe, with its 1” solid steel plug and bent 1/2” rebar handles weren’t what shut them up. Nor did the high visibility fluorescent orange paint job squelch their bragging. Instead… the red plastic-dipped handles had them in awe. You see, when you add the No-slip of plasti-dip with the naturally grippy surface of 1/2” rebar… you end up with handles that’ll strip the callouses off a lumberjacks palms. Once I dropped it over the top of the first stake their eyes widened and their mute mouths opened. And, I knew instantly the there was one thing we could all concur on… Big Brother Dave had taken post driving up to a whole nuther level! Now fellers, iffen y’all wanna put those Plain Jane Honda’s against a homemade, Ozark, callous stripping, post poker… Just let me know and I’ll lend you mine. And, who knows? Maybe you three will concur with the three of us… all post drivers aren’t created equal!

[@SWiFence]

That sounds like a showdown destined to happen! 🤣

[@aaronsalvesen4553]

All of the engineering that went into those, and you still have to pull down with your hands!? 👎👎👎Did they forget that we have weight and we could stand on something to drive this thing into the ground without having to pull down on it!?

[@blh3741]

Made in Calif???? wait til 2024 when Newsom makes gas equipment is illegal. Sucks living here!

[@SWiFence]

Seems like a foreign country to me.