Tachometer Installation - Quick and easy on any Car

[@rocksaltmetalworks6350]

Very helpful video. Thanks for making it.

[@FINNIUSORION]

great instructions.

[@Alberto-tp6pv]

When I turn on the ignition and it receives current, it jumps straight to 8k rpm. It doesn't matter if the engine is on or off, the needle only tells me 8k rpm if the ignition is on. What's the problem?

[@TikTokJA-t9m]

4:41 😊

[@rachelelizondo6585]

Zip tie your tach

[@markfeuerherdt2338]

So the white wire for the tach light, is that wired directly into the headlight fuse?

[@KhaiMahase]

My 69 Camaro is the same, but I want to add a bunch of accessories, I'm assuming I cant run it off that very plug, if I buy a separate fuse block for accessories and run that wire from the new box to the ACC port on the original box it would put too much stress on that one wire and will ultimately short/blow something. Any alternative?

[@lopezart2853]

Thank you 🙌🏼

[@chrisstokley7687]

thx

[@JimGoch]

Great video bro just what I was looking for. Thanks. ❤

[@josephknowlton7246]

Liked, shared and commented 🍻🗽🤴🏻 4:46

[@tomc6177]

Thank you. Putting on my 68 Monaco 500. 440 magnum

[@402garage5]

Super helpful video! I used this to get my tac set up on my 73 Chevelle. The fuse box happened to be the same!

[@-joedal-]

Still dont know where i plug the green one on my Ford transit mk2 😅 on the ignition coil or somewhere on the distributor ? Help 😂

[@firebirdfilms4566]

How do I plug them into the fuse box what parts do I need? Wire connecters?

[@UnapologeticAmerican1776]

Trouble shooting......I ran all the wires correctly. Got power. Light comes on. Green wire to the positive coil side. Start the car, nothing. Ideas?😊

[@jcanfixall1585]

Read directions, so you ACTUALLY run all the wires correctly, try green to coil negative...

[@ZyphloXP]

Broooo what happened to your hand man 😢 god bless you bro

[@vergin9]

How do i know wich wire on the distributor to connect it to

[@imanuelkasheeta8820]

Tht V8 Sound very nice

[@fortheloveofnoise]

just make the car louder by removing the muffler or put a louder one on and just listen for when to shift

[@sillygily4435]

We’re all a bunch of old manual chevy guys without tachometer aren’t we?

[@malakihwesterlund2735]

I love my s10😂❤

[@jonpaulison2283]

Thanks for the video

[@The.Irritations]

Do you have to run a hot wire? Can’t you just use the distributor, and ground?

[@91Bronco]

Thanks for the video. Gonna get one put in my Bronco

[@locotrucker46]

Thanks Dan. Your video was very helpful for me. I appreciate it and I enjoy your other videos as well.

[@gtl3x627]

How did you connect the green wire to the distributer? Is there a certain type of connecter you need to wire on the end?

[@cocobolo1911]

Best explanation on here, thanks!!

[@bryanbartucci9444]

This is what I've been looking for. Simple instructions explained well with good camera angles 👌

[@iGazm]

Quick, easy and straight to the point. Great instructional video! Car sounds amazing as well. Thank you

[@raymondmoreno7442]

Thank you great video helpful

[@AE-TDK]

I have a question, how can you install one on a 1982 mercedes 240D diesel car not gas.

[@felimuscle7308]

Mk1

[@rootbeer5539]

Simple instructions. Easy to hook up. No bullshit. Good stuff.👍

[@JackofAllTrades1]

The tip on using the fusebox was helpful, thanks.

[@TikTokJA-t9m]

Nice installation instruction bro ... i am not a fan of classic cars but i Certainly like the sound of the car when testing 😎. Let me rethink

[@turdferguson388]

The double hose clamp looks a little tachy.

[@jdentel5905]

See what ya did there

[@rdroid2438]

😭😭

[@fratzogmopars]

Ba dum dum, tisss.

[@jetty281]

😂😂😂😂😂

[@felimuscle7308]

Mk1 gti

[@johnivill1974]

You did a great job on this.

[@maximuswedgie5149]

Looks kind of “tachy” I just caught that👍😂

[@mariobortoluzzi2929]

Fantastic video and explanation. My only question is, if I do not have an HEI Distributor, where do I connect the green wire? Thanks for the video!!

[@trifivegarage8683]

I like it! I have the same HEI why I love these old chevys. So easy and reliable to work on. I'm glad you stressed about keyed power for the tach. I hooked mine by accident to battery. Chased a slow drain for awhile. Thought it was a weak starter, battery ect. Looking forward to seeing the stripe kit when it's done. Love those old's Chevelles! Thanks for sharing.

[@DDSpeedShop]

Awesome! Thanks for all the support man. I stoked for the stripes too haha

[@allanbowers4339]

Nice job! Love the sound of your car too!

[@billjohnson7041]

How many stitches in the thumb?

[@DDSpeedShop]

Wait was too long so I just taped it up. Chicks dig scares right?

[@samuelbacon1596]

DD back in the day I put a 1200 horse Volkswagen motor together using stainless steel hose clamps... To compress the rings to get them in the cylinder sleeves to put the motor together..... You made me think of a long time ago...... love the progress love what you do...... keep up the good work take care yourself junk man do

[@alexivanov1521]

Great video, thanks brother!

[@jessesosa3986]

Great video, straight to the point!

[@szymon6207]

Install rpm meter with dacia spring

[@ipaporod]

Almost all videos on how to install a tach in almost ANY car are made for old cars with ignition coils which has a + and -, why not do it on a modern vehicle which has independent ignition coils for each cylinder and no + or - signs!. Where do you connect the green wire/signal in a modern vehicle?

[@trijohn23]

Which modern vehicle doesn't have a tach nowadays?

[@ruby-7seven]

​@trijohn23 any of the 1992-2005 crown vics . Those are the ones I'm looking for at least.

[@donaldhill7388]

Very nicely explained and demonstrated!👍

[@theone2028]

DDSpeedshop, comin in clutch, fuckin mint 👌

[@manuelsarria1377]

Cool video man never new how to hook one up.....

[@DDSpeedShop]

Thanks man

[@NTSG86]

Thanks for the great explanation, but what mufflers do you use? They sound amazing

[@ericruiz2174]

Thanks for sharing. All i needed to learn to install mine in my 54 chev 3100. Regards from Puerto Rico.

[@alexamaro401]

Perfect video thanks man

[@armygreenfj3924]

Cool video!!! So are we not able to drill through the steering column?

[@shanewright6958]

Great install and another great video 👍

[@lldrny]

Sweet👌thank you so much.

[@leebraziel2774]

Thank u Sir

[@ReeferOffcial]

Next time to make it cleaner use double sided tape

[@Captain_Solo]

Good video, been looking for a way to install some auxiliary gauges.

[@ezelk1337]

Like it! Looks like the Sun tach that I had in my 56 Chevy in high school. I like the 8000 RPM max scale. Who in a street car needs 10K RPM?

[@DDSpeedShop]

Yeah I think Bosh bought out sun. I still like their look.

[@FMFInnovations]

"Tachy", ha!

[@ejvelarde666]

Looks kinda “Tachy” lol

[@braysanborn6000]

Tach install was smooth , with upgrades every day the Chevell will be good as mew in no time! Has the guy you bought it from seen it lately ?

[@DDSpeedShop]

Yup hes just down the road from me.

[@rnewtonsgarage5926]

Using two clamps is tacky for the tack .

[@jerronj]

Great video. Do you still have the chevelle?

[@rdroid2438]

Why do u have a tach on this car

[@morgankovarik3649]

Your title is very misleading of the video. It says to hook it up to any car. Mine has a magneto.

[@jcanfixall1585]

Read the fncking instructions or Google tach installation with magneto...

[@morgankovarik3649]

@@jcanfixall1585 I was referring to the title.

[@jcanfixall1585]

@@morgankovarik3649 the title is not misleading!!! In 40 years of being an automotive technician the only engines I have ever worked on with a magneto have been motorcycles...

[@morgankovarik3649]

@jcanfixall1585 in my 30+ years of doing service work about half the cars I've worked on don't even have an ignition system and then about 50/50 were coil/mag.