Biggest Tire Size on a Tacoma/4Runner with NO LIFT!

[@RY-mw7br]

For those who want to keep the stock wheels: I have a 2018 Offroad at stock height and literally just installed 265/75/16 tires which equates to a 31.7" wheel; no shaving required and no rubbing at all at full turn. Like TT mentioned, I believe you could get away with 32"s at stock height with zero shaving/rubbing, but I haven't seen any tire spec combo that gets you to exactly 32" at R16.

[@jmyers6175]

265/17R 16 is all you want any bigger you need a lift and gear ratio change. Congrats!

[@politerudeboi6898]

noice i might try that

[@boston1450]

Yup I put 265/75/16's on my 2020 & no issues. Then I got stupid & put a 2/1 lift. Spacer/Block. Every 6 months I had to get alignment & it had a wobble in rear. Live & Learn. I got 2023 trdSport recently & I may leave it stock & just go tad bigger tire.... Or I may go Bilsteins 5100 adjustable shock/strut set at 1 on front & Bilsteins on bacK. No block. So it will be leveled & not much different geometry then factory. Then I may go 275/70/17 on stock wheels. Shouldn't have any rub or cutting..... Lifted Tacoma's look sweet BUT it comes with a pricetag. Even if you do the best of the best be ready for issues. It's almost a guarantee.....2/1 lift did very little to MPG. Bigger tires WILL reduce MPG by 2/3+ MPG

[@Eastsidegeorgiaboy]

Umm, thats the standard factory size on the Tacoma Trd Offroad. My 2022 came with those. Maybe you meant 285 instead of 265, since 265 is normal/stock size.

[@RY-mw7br]

@@Eastsidegeorgiaboy True, stock width is 265, but my point was about the series, 70 vs 75. 285/70/R16 is basically 32's, but depending on the offset most people seem to rub going that route without a lift and cutting. At the time, I wanted to put the highest series on stock tires and stock height without rubbing or cutting. Now I have 265/70/R17, no rub

[@shohokuslamdunk]

not sure why so many haters. sure it will rub going over a speedbump let alone off-road. but this is an excellent video that could provide someone new to tacos with an indication roughly how big of a tire it will take. after watching this a newbie will see that a 2.5' lift will most likely be sufficient to fit a 33" tire so this is extremely helpful

[@JPRATT537]

People would rather bash than provide valid info

[@Spazum888]

@@JPRATT537 Valid info.... showing someone new to tacos about what tires they can shove in the wells and not explain how driving over anything will cause massive rubbing or putting the spare 1 inch away from the exhaust is a good idea? I like big tires as much as the next guy but you gotta admit this is a bad idea to keep these tires on stock suspension.

[@richardlushenko3429]

The way he cut that liner gave me anxiety

[@jackk1583]

seems like the open hole is a good candidate for water/rust?

[@socalcre8tor]

"Now what you're going to do here is pull this utility knife as hard as you can toward your face."

[@cperkins172]

The rim/tire combination gave me more anxiety…..the whole thing looks like a disaster waiting to happen!

[@deleteddata6671]

Yep thought he was getting stitches

[@naquoashuey2794]

So if you drive straight on a perfectly flat road, you won’t rub.

[@PatTheRiot]

LOL. Talk about chopping your shit up because you don't want to accept you need a lift and bigger arms if you want bigger wheels.

[@xfighter1117]

Any flex at all And this dude is having a bad day

[@jamesspencer406]

Great looking truck.your wheels nice am contemplating lift etc . Gd info

[@andyham6094]

PatTheRiot i would consider the biggest tire size without a lift without any body chopping or anything else. At that point just lift it. Now if you lift it and you want bigger tires, that’s when you can do mods to the body or get an off-road bumper but do the damn lift first lol

[@The11eleven]

As soon as he’s driving on any road, smooth or not, shits going south on the first turn

[@Ofrd_adv]

With that tight clearance, it’ll still rub. Specially when going in reverse. There will be a slight compression in the spring and hence will rub. Ideally a cheap top hat spacer is needed for 285s.

[@jasonconnell8821]

I have 285/70/17 with a 1n3 level spacers on a 2017 off road. It rubs on the frame any sharp turn, into and out of any parking space and all angles in reverse.

[@donnieraines2066]

Without a lift, any 285 tire will rub, especially in reverse, if you dont trim, and or do a Cab mount chop, been this way forever. Check any Tacoma forum, its the number one asked question, "How big of a tire will fit".

[@corneliuscrewe677]

I was thinking the same thing, that’s going to more than rub when the suspension is compressed even a little.

[@amandamcleod9355]

​@donnieraines2066 mine have never rubbed in reverse on my 3rd gen pro. They only rub a little when turning travelling forward and hitting a bump. Not major enough to rip anything off because my truck is totally fine after some harsh snowy backroads and they've been on there 2 years with no modifications. 285/75R16.

[@Eastsidegeorgiaboy]

​@@donnieraines2066i thought the consensus was that 285s will fit with no rub on trd pro models, and models with factory lift. My understanding is that the wheels need to be zero offset.

[@dannycwalters]

Interesting take on an upgrade with minimal modification. Had me sketched out with that box cutter though 😳 eesh

[@FMXIAN]

I have these same wheels paired with Falken Wildpeak 275/70-17, stock suspension. They indeed do rub with the wheel at a slight angle

[@lambertrodriguez1057]

0 offset and stock suspension?

[@gabrielguardado1009]

You think 265 70 17 will rub?

[@FMXIAN]

@@gabrielguardado1009 doubtful those are even skinnier

[@Mrblitz1819]

@@gabrielguardado1009 I run 265/70/17 on my 2018 SR5 with stock suspension and have no rubbing at all

[@rondiesslin4966]

@@Mrblitz1819 is that with stock wheels or aftermarket with a 0 offset?

[@CplMAC1144]

2” bigger tire is only 1” worth of lift. Tires are round.

[@boblafountaine9560]

But doesn’t it still look two inches taller when you see the entire tire? It’s what the eye sees.

[@KTMcaptain]

@@boblafountaine9560 no, it’s only one inch tire like the nice man said. It’s 1” taller on either side of the wheel’s centerline. If the hub mounted to the tread then it would be 2”, but it mounts to the center so it’s only half.

[@noisysounds4420]

One thing he neglected to mention was changing the size from a 16-in to a 17-in wheel as well as the increase of tire.

[@mattgill69]

@@noisysounds4420 doesn't make ay difference. outer diameter is the same. math is hard...

[@noisysounds4420]

@@mattgill69 it's not hard just involves a lot of variables that affect the look and ride. 🤷

[@ronyalvarado5832]

That tire is gonna touch the body 💯

[@SuperSocal619]

@Jack Carlos if youre having to hack your girlfriends instagram page then you probably shouldn't be with her. Some of us here actually care about the topic at hand. Tire size fitment for Tacomas.

[@dog514]

i just put 285/70/17 k02 on my trd sport and it rubbed A LOT even with a 2” lift. we had to trim a lot of the wheel well plus do a cab mount chop. there’s no way this won’t rub without any lift especially when the shocks compress off-roading

[@Lobo1604]

It was probably your offset. With my 285s my tacoma didnt rub at cleghorn, or at sandstone canyon. No cab mount chop nor plastic cutting. I did have the alignment shop adjust the caster though. This was at 0 off set. Once i changed rims though the offset was -25 and that made my tires rub on everything even with the alignment, thats when i needed the cab mount chop and very little molding with a heat gun for the plastic. Its all on the offset with 285's 👍🏼

[@robdawg700]

You think 275s would rub?

[@69sound81]

Your offset and and wheels (how wide are they) are a huge part of it. Offset changes how tires fit in the truck and how wide you go on your wheels will change how the tires fit on them, so it will also affect how flat or round they become at certain pressures as well as how much bulge you get on your sidewalls, which translates on the rub you can expect between the tire and the suspension components too. Always remember that the way your tires fit only apply to your exact setup (mods, wheels, offset, suspension components, suspension wear, specific tires, etc)

[@davidnguyen1216]

I just got my bfg ko2 285/75/16 no lift needed no rub this morning thanks to your video. Trd pro oem height didnt need any trimming. Mounted & balanced so quiet thus far.great vid guys . Helpful info helped make my decision.

[@rxsonny]

Hey like your comment. I also have Trd Pro and was wondering install bfg Ko2 285/75/16 on it and would that rub anything on turns I just don’t want to lift it. Did you have to do any trimming. I’m using stocks wheels.

[@davidnguyen1216]

@@rxsonny no trimming at all. Stock wheels are +13mm offset which is why i cleared. I thought i might ruin on articulation but i take it slow down hill descents. Heard a couple of tiny ribs on passenger side only when RF was compressed but uphill zero issues. Im considering leveling kit.i dint wasn't to lose my fox's . I go offroad a lot.

[@jod1113]

Just wondering if you still are happy with the K02s in the larger size and still no rubbing? Have a 2019 Pro and want to do the same thing. Thanks

[@davidnguyen1216]

@@jod1113 i had to take mud guards off. The oem glaps would rub under articulation. But light rub. Not crazy

[@Sothereiwastakinadump]

I have bilstein 5100’s on my front. Just wondering if it’s really worth it to go to 275 from 265? Are you gaining that much for the loss?

[@ravengrin]

Would have liked to have seen a before and after wide shot of the truck. side view maybe?

[@mongerz4732]

I was gonna comment my 2 cents on the clearance too, but everyone is already jumping on them...lol... Function over fashion!

[@PatTheRiot]

Im starting to think asians love their shit to rub on the tarmac, when the truck can't rub, maaaaan let's make them rubbers rub lol

[@deanoey1185]

PatTheRiot has nothing to do with being Asian, this guy is really cool and is always helpful.

[@simba2ndpatches14]

Since it barely clears now, any off road driving when the tire goes up over bumps when turning it'll rub so much it'll probably rub the fender flare attached to the fender causing damage to the fender.

[@Super_Mario_Fpv]

Lol. Flat roads only.

[@atfarley]

I think that if the tire is 2.5 inches larger you only gain half that in added ground clearance (1:20).

[@Floof_Factory]

The 32 inch tires is all you need

[@jtec99]

If you just put studded 33's on it, the studs will trim any plastic for you over about 3000 miles 🙃

[@desertwolf49]

285/75/R16 slight bit of rubbing only when I turn steering wheel all the way to the left or right going over a bump

[@theodorskinewkcomerski3048]

The 285s won’t hit the wheel when the suspension compresses ? I don’t believe it. 265 75 16 is the largest tire you can put on Tacoma stock with out the possibility of hitting the well

[@Runnin4Tacos]

Theodorski newkcomerski it will rub when off road. You're right on the 265/75/16, also 275/70/17 would work if you still want to be able to off road with them. Most people who are asking for this video do only daily driving

[@jcoats5529]

@@Runnin4Tacos well that's just lame making a video for mall crawlers

[@hellojrod]

Good Video, mall crawler or not. If you are going to hate, hate on the owners of the truck.

[@BlackGT1999]

Theodorski newkcomerski false

[@CanadianOffroad4x4]

ran 255/85/16. never had any issues and i flexed out multiple times lol. The best and proper way to fit bigger tires to actually FUNCTION offroad is to infact trim and cut as needed rather than lift to think you need to fit the tire.

[@othoapproto9603]

But is the tire rubbing on the either control arms? A SPC UCA will allow you is set caster to give you more room.

[@jimenagulla9081]

Always put the spare tire wth the air valve facing down, when it loses air it will be easy to fill, otherwise you will have to remove again, and your tpms light wont be on forever.

[@Aroceen]

You can't put it up with the valve stem facing down, plus that means the face of the wheel would be exposed to debris. Also, the spare tire does not have TPMS.

[@Rey-me3rj]

The reason the tire is mounted with the valve stem facing up so if water or moisture gets inside of tire it will not rust the valve core. To solve that problem buy a 12" flexible valve stem and pass it thru 1 of the wheel openings put tire the way it should be mounted facing UP

[@50foad]

@@Aroceen Not true

[@RockyRoark]

Would it then be possible to install the TRD PRO wheels and tires without a leveling kit?

[@equalizer2233]

There the same size as what comes stock on a trd offroad.

[@CanadianOffroad4x4]

Yah if ur gonna tell people this, id recommend doing more than just showing a stand still video. Telling people that they can fit this stock without showing more involved like flexing, driving, bumps etc etc. This is practically useless. Considering i fit 255/85/16 toyo mt stock with stock wheels and never had to worry about a thing. It varies through out but thats why you trim and cut where needed.

[@jtec99]

Are those 32's? Not a conversion expert

[@CanadianOffroad4x4]

@@jtec99 33s my friend!

[@jtec99]

@@CanadianOffroad4x4 nice, got a 2" spacer lift and 2" block in rear. That get me anymore flex clearance?

[@CanadianOffroad4x4]

@@jtec99 technically not with a spacer. Your suspension is limited to by what you're running. It will flex as much as it can. You won't have issues

[@jtec99]

@@CanadianOffroad4x4 thank you buddy, and the 255s will fit on stock Toyota rims in assuming? Have the trd off road year 2020.

[@bobwoerner8731]

just bought a brand new 2023 sr5 4x4 tacoma. it has 245 75/r16 firestone destination le2 with the dark rim. i find the truck sitting lower than i like.used to the 1500 ram i traded in.i find i have to tilt my head to get into the tacoma also not crazy about the dark rims.would like to switch the rims to a crome color and put on tires that will raise the truck without having to install a lift kit ....any suggestions ?

[@chadrollheiser9368]

Just so everyone knows a 255/85/16 (33.2x10) fits under any articulated+turned situation without any trimming.

[@doublej4965]

Mine rubs a little under turn +flex. 2018 OR 255/86r16 ST/Maxx. I would still suggest them though. 285s will rub a lot as you obviously know.

[@davidlongley4969]

How about 17 inch rim

[@TsiRoadkill]

I have a 3' lift and can still get 255/85s to rub under certain situations...

[@BDA123100]

I have the BFG AT KO2s and they don't rub at 265/70R17 on TRD rims. They look great and more importantly the 265/70R17 is a common size so you don't pay a fortune for the tires. I was just over $800 for the set on sale at my local warehouse club.

[@SCTundra11]

285/75/16 Nitto terra Grappler on trd pro wheels on sr5 2019 dclb. Stock pro set up

[@dondavi5798]

Question. In front instead of drilling a hole could you not use the already stamped hole that was in front of the tab you cut off?

[@connorellisx]

The center cap from method is made to look like a race style hub that you would find on vehicles such as prerunners and trophy trucks.

[@lulmoewiththegimpyleg6815]

Exactly

[@nazarethpreciado9950]

Yup and method is a big part of that scene..

[@blcdad]

@15:40 concerning the spare tire; "The last thing you want to do is put a smaller tire with these 33s". If you had say the original tire, 265-70-16, as the spare, you have differentials both front and back, so why would that be a problem to run it with a smaller tire on one wheel while you head to the tire store to get your flat fixed?

[@mattgill69]

I will try to be nice...... but in short there's dozens of different problems some of which could be fatal (like highway speeds). some people drive places and get flat tires where they aren't 5-10 minutes from a tire shop.. some people get flat tires when they're using the 4 wheel drive function of their truck. go put a 2" smaller tire on your truck in the desert or mountain trail and try to 4wheel your way out and drive 4 hours home. at midnight am cause you spent 3 hours trying to change a tire in the mud.

[@blcdad]

@@mattgill69 You have differentials that compensate for different speeds in tire rotation on the same axel. Why is there a problem running with different tire sizes at a slow speed for a short distance?

[@Eslamizar]

On my 23 TRD OR, on the TRD alloy wheels I got 265/75R16 and I have no issues. I have not fully flexed the truck but I doubt I will have issues rubbing. For summer time, I run my steel wheels with 245/76R16 tires and I’m happy with that. If I ever decide to lift, I would only go with the TRD q inch lift, personally.

[@Fotosynthesis858]

Just bought a TRD Sport last Tuesday & I’ve been following your page ever since lol! 👍🏾

[@raygee3587]

Congrats ! I’m looking for one now in Southern California . Dealers are market pricing them up 2 to 5 thousand I’m hoping production go up soon so pricing can come down.

[@joemanga350]

Bill stein 2” lift OME 885’s AAL leaf and 1/4” spacer on driver side $800 Method wheels 1,200 Toyo tires $800 $80 alignment No cutting no rubbing function and swagger You’re welcome 😉

[@eolsons]

I just purchased a 2021 SR5 Tacoma "Trail Edition". Apparently these have more lift than the stock SR5. I would like to upgrade wheel rom 265/70/16 to 275/70/17 K02, Nitto, or Falken. Do you believe there will be any rub or will I need to trim wheel well? Love your channel.

[@bernolieniegos1097]

May i know where did you bought the trd center cap that you replaced it into the method center cap,pls thanks

[@noisysounds4420]

I think he said meso customs

[@TheAmerican1963]

I run the Wild Peak 275/70R17 and they barely rub on the after market mud flaps that Toyota makes. No body rub on 2016 Gen 3. Love these tires.

[@acm0810]

ok, so, i dont get it. they make a video where they say it's stock, no rubbing with small trimming. but everyone else is having issues ? i guess Taco Twonz will do a second video review after driving few miles ? i wanted to upgrade my tires with these video, i was so happy since i didnt want to lift .. but i am now hesitating... i have TRD Sport 2020, i live in FL and i dont do offroad... but i want the truck to not look like skip leg day... any suggestions on what tires would fit using the original rims. (i like them tho.) anyone knows those original rims are 0 offset ?

[@ThaJuarez416]

265/70/17 that is the biggest you can go with stock

[@Srsly0_0]

So there would definitely be more modifications involved if i wanted a negative offset, right?

[@alvinmc5593]

This video should be titled What not to do with your Tacoma.

[@antonionicastro5330]

Why? I’m just asking because I just got my Tacoma and wanted some beefier tires. Was assuming this size would work

[@Chevelle602]

I want to know too

[@DavidRoberts-nt8fn]

Tires are too big. It will rip out your fenders once you hit a bump at speed

[@RKmndo]

@Jamie It also depends on what width the tire is, what width the rim is, and what the rim backspacing/offset is.

[@chi_htx3728]

Just admit you hate because you don't have a tacoma. You can't give a explanation to ur stupid comment

[@kanevivalakane3699]

I have installed 30mm wheel spacers after a 2 inch suspension lift on Prado. The wheels are still stock. I have 3 options. Should I get -12 offset and remove spacers? Or Keep spacers with stock wheels Or Get -12 offset and let the wheel spacers be there...

[@philipsoucie3015]

I just installed 285 75 16 Toyo at3's on my factory tacoma trd pro 2020. I have removed my mud flaps because it looks better and would just barely touch when turning. I seem to have lots of room. No rubbing, no lift. I also lost 2mpg. But looks like it should have come from the factory

[@papabear007]

Hi I have a 2020 Tacoma TRD off rd 4x4 do you have a pic would like to see it. I want to keep my stock rims for now and get the tires but not sure it work [e-mail] could you send a pic?

[@philipsoucie3015]

@@papabear007 I will work on pictures, If I cross a high curb will get a small rub. 88 rotors say with a 1.5 add aa leaf and a 1" spacer it won't rub at all. But I want the softer ride and no higher. Works for me

[@papabear007]

@@philipsoucie3015 Thank you ! I was thinking about 2inch leavening kit if that would help hmm

[@davidvasquez1100]

I have a ‘23 Tacoma SR 4x4 285s prob wouldn’t fit stock right? I’m guess the TRD pro has a higher ride suspension?

[@Nachoboomin21]

How did you change the grill? I’m iffy about changing it because of the front camera.

[@Runnin4Tacos]

Ignacio ornelas you won't be able to with the front camera

[@Nachoboomin21]

Taco Twonz thanks for the reply!

[@Repta710]

Ran into the same problem with my 2023 trd off road putting on 285 70 17 i did the same thing and works like a charm

[@Amritt_Poncho_Villa]

I like your channel and enjoy your videos. Don't want to see ya'll put out incorrect info. Tire size above the axle does not increase clearance. Your increase in clearance is 1.05". 32.7" - 30.6" = 2.1". 2.1" X 0.5 = 1.05". They are nice looking tires.

[@BlackGT1999]

Amritt Villa wrong.

[@Amritt_Poncho_Villa]

@@BlackGT1999 Oh you don't like the way the tires look. Is alright... That would be a subjective kinda thing.

[@DP-be6ny]

@@BlackGT1999 How is @Amritt Villa wrong. you're effectively lifting your truck 1.05 inches with 33s.

[@jubankta1627]

Do u think I can run 305/65or70R16 on my stock 2007 taco with the stock trd rims?Serious question!!!Thank You in advance

[@samsammy6210]

@@BlackGT1999 My brain has cramps after all those numbers 🤪

[@GlennHoweTeam]

"If you do NOT want to do any trimming at all, then you can go with a 32" tire or 275/70/17 equivalent." Does this apply to an "SR" with factory steel rims?

[@T4CO1776]

ive got a 2 inch level on mine and currently have 265/75r16. Im definitely upgrading to 285's here soon!

[@Youareanexperiment]

So I can mount the spare but it could burn away at the tire? Will it be safe without doing anything to the exhaust!? Thanks for the video, very helpful.

[@paulseminara2483]

You need to match the lug nut SEAT to the wheel. "Acorn" does not tell you the seat type. I won't poke at you for your tool or style selections, but it's technically important to match the seat type - conical/taper, spherical/ball/round and old school flat.

[@dustinrowling7121]

So, what is the consensus with rubbing if I put 265/70R17 Falkins at3 tires on my 2023 Sport with factory wheels and factory mud flaps. Will it rub? What about wheeling, will it rub?

[@tareskisloki8579]

I always thought Taco's had bigger wheel wells than Hilux's, but this is almost exactly the same amount of clearance work I had to do to fit 33's on my Lux with 0 offset wheels. Only difference is, mine isn't a mall crawler, so I did my turn test with the suspension compressed.

[@zebrastripes875]

A tacoma is a hilux. Its just gas not diesel

[@tareskisloki8579]

@@zebrastripes875 Hilux comes with a gas engine too, they're not the same chassis, Taco is C section, Hilux is full box, and the Taco comes with a longer wheelbase. Hardly any of the front suspension parts carry over (there's better stuff available for Tacoma, so a lot of Hilux owners have looked into what parts can be used on both)

[@ElStriker777]

🔥👍

[@Doc1855]

Ok I’ve got a 23 TRD Off Road, totally stock suspension and 16” wheels. What is the biggest tire I can fit on my Tacoma? I’m Not going to trim anything and I’ve got mud flaps.

[@ricflair2235]

Still got the temporary tags on it and already cutting pieces off. Noice!!! Does no one worry about the speedometer and odometer being wrong? My OCD tendencies couldn’t take it lol

[@deanwatkins8754]

Ric Flair and gears too

[@goprozack4255]

I'm very very worried about all these things too. I'm not a gear head what can you do? Or nothing you just have to bite the bullet?

[@ricflair2235]

GoproZack on older stuff there was a small gear u switched on a cable from odometer to the transmission. I don’t know what u do on digital stuff. Maybe flash it with an aftermarket code or something? I don’t know 🤔

[@porfiriotoro6650]

I remembered you installing new speakers. Can you tell me where to get or part# for the speakers pick tail and speakers adapter. Thank you 🙏

[@Runnin4Tacos]

We wouldn't recommend them. We are switching soon

[@michaelneang2328]

Will 275/70/17 fit on the 2018 TRD Sport stock rims

[@brandonblack2095]

yes

[@TheRichellis79]

Have you upgraded to this size?

[@djlusid]

So, you still need to trim body + exhaust for this mod. Heard.

[@anthonypascal9122]

Hello, my take away from this is from the spare tire placement. I would recommend that if you don't cut the exhaust pipes and perhaps use some sort of heat shield wrap, that may work too. Just my 2 cents. Thanks again guys for the content.

[@jasonpatrick5725]

I suggest cutting a flat spot in the tire. 🤔🤔

[@minusmartin]

@@jasonpatrick5725 BIG BRAIN

[@eyeofbass]

Exactly. Fiberglass insulation as an example. Wrapped. Don’t cut off the exhaust pipe. The exhaust should vent away from the vehicle not underneath it. Carbon monoxide hazard.

[@alanriera1481]

Hello, a question where I can get those center caps for the rims. I have the same rims, but I don't like the way the caps look. They are too big.🙏

[@alanriera1481]

?

[@craiglange3039]

I have a hard time believing you have no rubbing with the 285/70. I have a 17 Trd Off-road with 2” lift and my 275/70/17 rub in reverse with steering wheel turned 3/4 lock. Rubbing occurs on the cab mount. Cab mount chop is required.

[@JPRATT537]

With what size wheels? What was the backspacing? And the offset of the wheels?

[@craiglange3039]

JPRATT537 17X8.5 backspace 4.3” offset -10

[@JPRATT537]

@@craiglange3039 that offset and backspacing is the reason you're getting rubbing with the 27570. That size is usually one of the sizes that doesn't need much modification to fit. At least on the 4runner

[@JPRATT537]

@@craiglange3039 also those things combined with the size of the wheel.

[@Lobo1604]

@@craiglange3039 That is exactly why you are rubbing. Its because of the negative 10 wheel off set you have. I have the methods NV 305s 0 offset. I had an alignment done to my 28575R16s a bit bigger than the 28570R17 with KO2s and i did not rub at all. Even when i went offroading in cleghorn, azusa. I had no rub at all. I do have a 2.5 inch lift tho. Adjusting the caster forward helped remove the rubbing completely tho 👍

[@David-Theoneandonly]

Is there a leveling kit on that truck?

[@DaveRogers583]

285's are just to big for a stock tacoma or even with a 2" lift. You can fit 265 70 17 or 265 75 16's. There almost 32's or go with some pizza cutters. 255 85 16's. I don't know why everyone works so hard to fit tires that definitely don't fit. They're heavy, they throw your speedo off, they're likely to ware parts prematurely and they rub. So just don't do it. Not worth it. You can off road with 265's. Your talking an inch difference.

[@martykern7021]

An inch matters ask my wife 😢

[@Naturevidz12]

Can I put 17' wheels on a Trd sport? I know they come with 16' compared to the 17' in the offroad.

[@williamlimonjr3814]

I thought the caption says “will fit with no cutting and rubbing” 😂😂😂juskolord

[@threadoflife]

I want to put 285/75/R16’s nitto ridgrapplers on a Stock 2019 Tacoma TRD pro and hopefully to be able to do it stock without rubbing. I’m looking at Fuel Conver D694 16X8’s. I know TRD Pro’s come factory with a 1” lift so basically I’m trying to see if this set up would work.

[@06colkurtz]

The turn test is without the suspension compressed as it would begin an off-road situation.

[@Runnin4Tacos]

rob the elder exactly, most people who are asking us for the biggest size are also saying they are only driving on road. But definitely would rub when off road

[@tokitone]

Taco Twonz how about when just turning normal into a drive way will the rub ?

[@peterfairhurst]

@@tokitone Guarantee it will rub with any articulation. You could get a little more aggressive on that trimming to reduce that rubbing though.

[@thynguyen2403]

I'm running 275/70/17 on a stock DCLB OR and it rubs on full crank in reverse gear and turning into driveways. Aggressive trimming trimming of my fenders too. Thumbs down for this video.

[@tokitone]

Pete Fairhurst Yupp ended up cranking the fox up one more inch I’m in the clear now

[@pinoytacos4x48]

I bought 2021 TRD offroad can you give an idea for doing bigger tire.. thank you

[@jeffreymcdonald8267]

Loved the vid and the effort. The morale of this story is...ahhh...don't ever do this at home. Lift it first.

[@gotshopow3]

So with the wheel offset is at zero and the plastic panels that were trim. Would I need to cut more plastic if I opted with a -12 offset?

[@MichaelWilliams-qk9rm]

Thanks Twanz. Got my 2” Toytec lift done and was wondering what I should do for tire sizes.

[@oscarpallaresmedia21]

35s!

[@jubankta1627]

Michael Williams A 2” Toytec lift?!was this expensive?was it hard to install?I have a stock 2007 taco trd 2 whl drv And I want to do a slight lift is why I ask,Thanks in advance

[@lukenukem6920]

I have 255/80r17 wildpeak at3w tires on 17" TRD 4runner wheels. They work well for me. I havent had to trim anything. I have a small 5100 lift in the front.

[@cesargaspar6001]

Can you guys post a video with a camera showing the front tires during a drive test? Full lock, going up a drive way, speed bumps... nothing off-road. I think it would answer a ton of the same questions. Plus, I think it'd be pretty cool to watch.

[@Sam-kn2mm]

Doesn’t that Trim Package come with a factory lift? I need to know what I can get under my 2022 SR

[@troy3456789]

I love the tight turn radius on my Taco. I'd say it turns just as tight as my Camry; seriously, if there is a difference, it is undetectable by me.

[@modXELA]

Thanks for the video. Can you please provide exact links or specs for both the wheels and tires as I want to get the same exact setup. Thanks.

[@rich1958]

I wish those bolts on the "bead lock" were chrome or aluminum and not a gold tint.

[@fabienpics]

Hi, thank you for all the info in you re video, thas help a lot , I m new oner Tacoma offroad (2019). Since September 2021. Before I have FJ CRUISER for 10 years, I have question about the airbag, on the fj cruiser it was possible to turn off the airbag, when I go for offroad with my FJ cruiser I turn off the airbag all time , but with the Tacoma... not button for turn off the airbag.... what do you do for that.... do you pull off the fuse, or you just don't turn off the airbag in the trail..... Thank you .

[@Runnin4Tacos]

No need to pull a fuse or anything, I believe Toyota made it so it won't go off when off-road unless the vehicle rolls over. We haven't had any issues with the air bags at all

[@fabienpics]

@@Runnin4Tacos thank you 👍👍👍

[@xpy1573]

That's great if all you do is drive straight down a flat road at 25 miles per hour in a straight line. :P

[@willienillie6337]

Hello, I’m kinda late to the game here. Can you also show how the 275 fit and look? I’m thinking of getting 275 for my 4runner without lift or trimming.

[@Runnin4Tacos]

I would recommend doing a lift if you are going 275. Or you will run into rubbing issues.

[@jacquesivann]

Fail. Summary: Your new tire doesn’t fit stock and no lift setup.

[@Runnin4Tacos]

K

[@tiffanylarcade9275]

@Jacques do you even know how to do any of this..? I doubt it so don't act like you know what your talking about. Or how to be a decent human being for that matter.

[@mattgill69]

@@tiffanylarcade9275 he's right, guy. tire doesn't fit. any degree of variation would cause contact doesn't even have to be off roading. could be going in and out of a driveway or over a pothole. there is not enough clearance.

[@badhombre8383]

Ain’t no way in hell I’d be trimming my Tacoma just to fit some tires 🤣 them tires would be goin back.

[@FranciscoGonzalez-uk5bk]

Hello would like to know what’s the biggest tires I can put on my Tacoma if I do a lift of 3” inches in the front n 2 in the back

[@Runnin4Tacos]

35s if you are willing to cut and trim

[@davidyang1768]

Can you make a video about all the trimmings needed to fit your 35s? I'm looking to go that route

[@tylerhuston9259]

Get a lift, you will still need to cut. You put 35’s on stock your will have to cut a lot and ruin resale value.

[@Kinghammerhead]

Last line of defense has a video all about how to clear 35's on his channel

[@mrk8212]

geometric point of clarification... the difference in clearance (axle lift) between a 33" tire and a 31" tire is 1", not 2". Half of that diameter increase is above the hub.

[@kaomatic]

i’d rather off road efficiently than look cool at the mall tho

[@PatTheRiot]

Don't forget the rubbing when leaving the mall bump LOL

[@gsfbffxpdhhdf7043]

I would rather build a mall crawler that can wheel but dont wheel. And. Only lightly wheel it on dirt roads. And then buy a quad a dirt bike and a side by side and wheel the shit out of them like i did. These trucks are way to expensive to buy a 2020 trd off road then buy new tires and rims and shocks and re gear it and get a 6 inch lift and a super charger. These are all things you must do to propey wheel it and do the kind of wheeling i do. If you dont then all you are doing is ridding through puddles calling it mudding riding on dirt roads calling it hitting the dunes and driving 100 yards down a groomed trail illegally or at a track and saying u are trail riding. Yall pussy cant off road as good as i can.

[@andyham6094]

Gsfbffx Pdhhdf yeah I mean I off road in my truck but shit all that gear you said is mad expensive to go off roading with the right mods to not fuck your truck up and it still might happen. But like you said suspension sliders and other armour lifts tires wheels are all so expensive. That’s not even including recovery gear and bumpers and lights if you choose to do so. I have a sr5 4runner with just the trd skid plate on it and bigger tires. Can’t afford an off road suspension or sliders or anything else right now.

[@iantru9929]

@@gsfbffxpdhhdf7043 sometimes u need to to take your truck to a off road location . Your trucks carry all your supplies so u can go in deep in the trenches. That way u willnhv two vehicle for off road insted of one. More is better right?

[@iantru9929]

@@andyham6094 when u say off road suspension , what are u refering to. Because all lift kits are off road suspsension, just some are better but u can get some cheaper ones and it does the job just fine.

[@GetSaltyGetMad]

I have a '23 TRD OR DCSB with the TRD 2/1 lift. If I want no rubbing, trimming, and no cutting or cmc, then what size is best? I want to be able to full flex/full lock with no issues whatsoever. I don't like the oem wheels, but I'd definitely want to stick with 16's and at least an 8 ply tire. I heard 265/75/16 would be 1 inch taller than the stockers, so that would give the appearance of a 3' lift on my 2" kit if I'm thinking correctly.

[@ScreamingSkullSaloon]

I am not going to lift my 2019 TRD Off Road (Yet) but am going to put 265 75 16 BFG KO2's on it this weekend. When I eventually do lift I may just go with a 2in Front 1in Rear lift. I only Off Road a handful of times a year and the trails/roads I do travel are pretty mild. My old 2013 Taco with 285 70 17's with 3inch F 2inch R lift seemed to be a bit Overkill for what I normally do.

[@sucha603boy]

I have a 2021 TRD off-road and I’m doing the OME 2”, with some 32” tires, perfect for camping and mild off-roading, I don’t see the point of pounding a brand new truck on heavy off-road and rocks, that’s what my 1987 Toyota pickup is for lol

[@AudibleVisibIe]

285s on stock suspension lmao good luck. The biggest tires you can fit on stock suspension with no trimming and no rub is 265/75r16 or 265/70r17. And 275s will fit with minimal trimming

[@planbenterprise]

“Fit” is a relative term.

[@mikerobinson2021]

Hahaha true

[@esgarfigueroa5944]

Hola tengo una sr5 4x2 2022 cuál serían los tipos de llanta que puedo usar con el mismo aro de fabrica

[@backyahdbbq1254]

Thanks for showing this. Although I was tempted to go bigger on my 2021 Tacoma TRD Sport, I decided to go with the Wildpeak At3W in 265/70/17 on Black Rhino's Sierra wheels. It actually feels great and I think I could have gone up one size. Anyhow, thanks guys for all the awesome vids. 💯🤙

[@gabrielguardado1009]

Hi brother you think you could have gone up one size ? What you mean by that sorry I’m trying to upgrade my wheels also not sure which to go for . I wanted ko2 285/70/17 but I’m sure they will rub

[@backyahdbbq1254]

Gabriel Guardado Actually, the 265/70/17 (31 inch tire) just fits without a lift. If I were to go larger, it would be better to get a lift. Yep, the 285's will definitely rub. The KO2's are dope.

[@TheRichellis79]

I’m thinking of getting the KO2 275/70/17…. You think that will fit? I have a stock 19 trd sport. It does look like it has a slight lift 🤷🏻‍♂️ maybe an inch lol

[@kenni411]

what rims did you go with ?

[@joshkreisman7761]

how have your tires held up? I'm interested in going up to a 265/70/17 on my stock '23 Tacoma. Any problems with rubbing at all?

[@clipsin2007]

The link for NV caps doesn't work! Where can I buy these TRD center caps?

[@juzDubbin]

Dude, you should have centered the TRD center cap logo with the Method logos on the wheel....

[@alanriera1481]

Hello, where do I buy the center caps? They look excellent.

[@jomero1808]

For every extra inch that you are increasing on tire size you are getting only half on ground clearance, if you are upgrading from 30's to 33's you are getting only 1.5 inches of extra height. Difference in between diameter and radius

[@DP-be6ny]

It's actually little more than 1 inch if you calculate going from 30.6 to 32.7

[@danielcalona9822]

❤ nice set up what’s the wheels size

[@speterbilt]

That shit gonna be rubbing hard when actually offroading Imogene pass or similiar roads.

[@Dies1r4e]

when he drives into a freaking parking lot that is going to rub like hell, or down a slightly uneven gravel driveway.

[@chrisspor9861]

What brand is the T-shirt that you were wearing with the Tacoma truck on it?

[@Runnin4Tacos]

Toyota Freaks

[@dlg5485]

Idk about this. A turn test in your garage is one thing, but actually driving normally on the road with this setup is another thing entirely, let alone trying to go offroad, Personally, I wouldn't run this big of a tire, in any case, because I don't want to cut on my truck and 35s look ridiculous, in my opinion. I think 32s are plenty big enough for this truck and they don't look silly.

[@stuartsweetman]

I tried to put the same size tire on my 2013 TRD and the tire got hung up on the upper control arm. How were you able to avoid that?

[@roadeomagic]

Looks great, I have one question, when you put larger tires, what happens to the speedometer? Does that have to be adjusted?

[@EyesWideOpen420]

There is products you can buy to adjust this.

[@Ollegram]

With a high dollar scan tool (Autel Maxisys for instance), you can go in and change the tire size. Some vehicles do not have this option but I know that is one way to do it. In other words, an automotive shop should be able to do it with the right equipment.

[@WMTrackdog]

Whats the additional ground clearence?

[@GATORADDAM]

Your math is faulty my friend.... Assuming a 31 inch tire to start with and a 33 inch tire replacing it, you get a one inch lift. Ya know.. cause half of that tire height is on top?! I don’t know about you, but I’m not gonna spend that kinda money, do the trimming, worry about rubbing under off-road conditions just for one inch. ( that’s what she said)

[@j0shll0yd]

Tom A exactly why I haven’t gone bigger.

[@93juanramirez]

Same size tire and rim but -10 offset. Would that work also? Or it would rub way more?

[@tomthorn2887]

I own 5 Tacomas. You CAN NOT put 33 inch tires on a stock Tacoma!!! ha It's going to rub like Hell!!! If you want 33 inch tires then go get A LIFT!!!!

[@itlogutube]

Not all 33" tires are true, depends on brand. 255/80/17 Cooper under 33" and 285/70/17 Goodyear actual 33". As for rubbing depends on rim offset. Even 31" with huge negative offset will rub. 285/75/17 is over 33''!

[@Lexusgx550]

tom thorn how about 275-70-17 on stock ?

[@James_Reilly99]

I currently have 33" tires on my 2019 tacoma with stock height with minor trimming, no body mount chop and it doesn't rub while off-roading... and they have 1-1/4" wheel spacers on my truck too... they fit, as long as your okay with trimming fender liner

[@PotentialDifference1]

What size life do you recommend? I have an 07 Tacoma and want 285 70 17 tires 😁

[@James_Reilly99]

2ZZGE5.56 I would go with a 3” if you want to comfortably fit, but your going to need a cab mount chop reguardless, I’m at stock ride height on those same size tires with a cab mount chop and I have no rubbing issues even at full flex