Take a closer look at the Juki MCS-1500N Coverstitch machine | Echidna Sewing

Take a closer look at the Juki MCS-1500N with Gary. Watch as he demonstrates the capability of this machine and also explains the differences between a coverstitch and overlocker machine.
View the Juki MCS-1500N on our website: esew.co/mcs1500n

[@Indydi]

Your videos are so clear and concise. Loaded with information!

[@EchidnaClub]

Glad you like them!

[@laurenj5538]

Every time I need to re-thread my machine, I refer to your video. Thank you very much, Gary for a very well put together demo :-)

[@EchidnaClub]

You are very welcome! :)

[@emmagriffin2802]

Your explanations are crystal clear, thank you. I love my mcs 1500 for all the reasons you give.

[@EchidnaClub]

Good to hear Emma! Thank you for your feedback :)

[@Springermom2]

Great explanation & demonstration, Gary! I wasn’t aware that a true coverstitch machine was so different from a serger/coverstitch combo machine. Thank you!

[@EchidnaClub]

Glad it was helpful!

[@PhillyNikki]

Thank you very much for this video! I’m in the US and recently purchased a Juki MCS 1700 but due to COVID-19 I was not able to take a class on how to set it up. Thanks to your video I learned a lot about my machine 🤗

[@EchidnaClub]

Glad I could help!

[@surfbaby2004]

Really wonderful and helpful video! Your explanation is clear and thorough.

[@EchidnaClub]

Glad it was helpful!

[@cindyw6621]

What a Beautiful Machine and is so similar to industrial machine, you are a great teacher and if I was in the market for one, I would certainly buy this one. WOW

[@EchidnaClub]

Thanks 👍

[@karinpearson5562]

Hi Gary. Thank you so much that was such an incredibly helpful video. Thanks for teaching me how to remove my work easily and pull the threads though to the back. That was something I didn't know. 🙂

[@EchidnaClub]

Glad it was helpful!

[@patlakner9889]

I have watched the video a few times and I don't understand what happens to the top stitches. The video shows Gary leaving a tail on the front of the fabric when he cuts the needle threads, but then they disappear. Any tips?

[@maryhull531]

A very good and concise tutorial .

[@EchidnaClub]

Glad you liked it

[@evanmargaretklatt6072]

Thank you. Great video. Clear and thorough.

[@EchidnaClub]

You are welcome!

[@nerylucarini6465]

Thank you for this video! I love my Juki and am hoping to get lots of knit skirts finished.

[@EchidnaClub]

That is great to hear Nery! Happy stitching.

[@mc4803]

Very helpful! So clear ... ❤️ from Mexico 🇲🇽

[@EchidnaClub]

Awesome! Thank you!

[@knitewe]

Ģreat video Gary. Nice to see Martyn get a shout out. Guess I'd better unbox the coverstitch machine I purchased from your man Alec almost two weeks ago.

[@EchidnaClub]

Absolutely!

[@Mrcorronchis]

Your are the best !!! I learned how to use my Overlock machine with cero knowledge with your videos thank you ☺️

[@EchidnaClub]

@Mrcorrochis That is great to hear! Have fun sewing!

[@ClaireEngland1]

Fabulous video - very informative and helpful. Thank you.

[@EchidnaClub]

Glad it was helpful!

[@lindasherman8036]

Great demo. Thanks

[@EchidnaClub]

Thanks for watching!

[@hannahellis4549]

Very informative and really enjoyable thank you

[@EchidnaClub]

Glad you enjoyed it

[@Hemmer5]

I’m a little late commenting. I love your videos. They are very well done and very informative. I’ve been looking at coverstitch machines and I’m seriously considering the Juki 1500.

[@EchidnaClub]

@amerrick7538 This is a great machine - beautiful stitcher and easy to use :)

[@irinaslinky]

Great tutorial!👍 I have exactly the same wall organizer from IKEA 🙂

[@EchidnaClub]

Awesome! Thank you! Hanging things in a sewing studio makes the important tools accessible right!

[@FromShetoMe]

Thank you so much! Great video. I have an awful coverstitch machine that skips stitches and this looks like it will be a winner.

[@EchidnaClub]

Thank you for your feedback, reach out if you need any help!

[@armilton01]

This is the best Coverstitch machine in this price range! Functions like a high end machine! I absolutely love it!

[@EchidnaClub]

That's great to hear :)

[@nadiasews]

Thank you for this video! I found a second hand one of these and am trying to decide if I need/want one because sewing knit fabrics on my regular machine is so frustrating

[@EchidnaClub]

Glad it was helpful!

[@meema227]

Very good video and I’ve watched so many 👍

[@EchidnaClub]

@meema227 Awesome, thank you for your great feedback!

[@marissadrew8233]

Very nice machine! I love to have it!

[@EchidnaClub]

The best!

[@marissadrew8233]

Where is the best affordable price we can buy this type of Coverstitich machine, Sir?

[@marissadrew8233]

Can you show Sir how to make leggings, t shirt or hem the dress ? Are you sewing these kind of clothings for your family ? So people like me as a beginner user of this coverstitch, we can see and get a good advise and tutorials again from your channel.. Thanks in advance !😊

[@user-tm7bm1ff1n]

Thank you I’m looking to buy one I’m professional in sewing Really time to get it Thanks again

[@EchidnaClub]

@user-tm7bm1ff1n Thank you for watching our video and providing feedback. You will love this machine and how well it stitches!

[@lidslater2617]

Thank you so much for this excellent clear video. I bought this coverstich machine in October 2020 and I love it so much, you have confirmed I made the best choice and the engineering behind it. I don't know if it is my imagination and that a machine can really be so sensitive but the looper seems to go really tight on the tension and really hard to pull through and out at the end on some reels of thread though they look the same as my others to me. But as I havent changed the looper tension dial and I check the threading is correct several times, I can only think it doesnt like the thread. Have you come across this? Thank you

[@EchidnaClub]

Hi Lid - if all of a sudden and the thread is pulling tight it can be the way the thread is coming off the reel, it is not uncommon for the thread to be wound tighter towards the end of the cone. You could lighten the tension off towards the end of the reel will alleviate this!

[@barbaradavie150]

Great video. Thank you. Would you say there are enough improvements/changes to warrant an upgrade from the previous version? I love my Juki.

[@EchidnaClub]

Hi Barbara, that would be hard to say without knowing your machine you currently have. We are happy to discuss the differences with you if you want to call us in store on 1800 000 360 :)

[@atekandi6715]

You are the best tutor in sewing machines. I have this exact juki coverstitch. I want to ask you: if l use helanka sewing thread cone on it, should l use it only to the looper or all cones? Same question if it's a serger: Where do l use the elastic thread, to all 4 or just the loopers? Thank you so much in advance, big hug from Greece and by the way: so happy to see the name of your channel is Greek. 'Echidna is the viper in ancient Greek but l guess you know already...Athena K.

[@EchidnaClub]

@atekandi6715 Thank you for your lovely feedback! Enjoy that great machine you have :)

[@51bbob]

I’ve been a SewTech for decades. I watched 2 or 3 before this and thought I had tuned into the twilight zone. (That old!?). This was the only one that made any sense. 😂

[@EchidnaClub]

@51bbob Thank you for watching - great to hear that it made sense for you :) We appreciate your feedback!

[@martharojas6985]

Thank you for sharing! Can we use different sizes double fold binder?

[@EchidnaClub]

Hi Martha, thank you for your feedback. This is a commercial grade binding attachment including mounting hardware provides a 10mm clean finished double fold bound edge using a 36mm fabric strip or bias binding tape. Which means it only does one size. Hope this clarifies it for you.

[@eoinmccarthy5093]

Thanks for the video! On this machine can you take out two needles leaving the center one to do a single needle chain stitch ? Also can you take out the center needle to do a two needle coverstitch ? How does this machine handle bulky fabrics or is it meant for more lightweight knits?

[@EchidnaClub]

Thank you for your feedback. Yes you can do the chain stitch on this machine and it can handle different weight fabrics. Yes you can do a two needle coverstitch as well. :)

[@janjacobi1639]

Hi Gary, Great video on how the coverstitch works. Would it sew binding around towelling bibs?

[@EchidnaClub]

Hi @janjacobi1639 - yes it will. You can purchase a Binder attachment which helps with the process: www.echidnasewing.com.au/mcsbinderkit

[@yvettemendoza1849]

Has the binding video been uploaded ? I’m trying to get one for my juki but finding which one is compatible seems impossible

[@EchidnaClub]

Hi Yvette here is a link for our binding attachment www.echidnasewing.com.au/mcsbinderkit

[@deborahsmith6954]

Hi. Thank you for the great video on the 1500. I've just bought the 1800, very similar, so this was very useful. Did you ever do the video on the binding attachment? I've seen the video on your website but wondered if you'd done one too? Many thanks.

[@EchidnaClub]

Sorry Deborah, no we haven't done one with the attachment. It may be one we will do in the future.

[@deborahsmith6954]

@@EchidnaClub Thanks for your prompt reply.

[@mesha_bi9079]

Hi dear can you tell me where I can get an 18 00 machine to buy ?

[@deborahsmith6954]

@@mesha_bi9079 I'm in the UK and bought mine from Frank Nutt Sewing Machines in Birmingham.

[@joanwhite2417]

I enjoyed your video! Does the small harp size of this machine create any challenges? I see that area is much smaller than on other brands.

[@EchidnaClub]

None of our customers have said they have had challenges with the harp area, and it is our most popular Coverstitch!

[@heidik1757]

Do I have to have the binding attachment? Or is it just convenient to have one? Good video!

[@EchidnaClub]

Hi Heidi, thanks for the feedback! The binding attachment does make it easier to sew binding on using a coverstitch machine, so yes you could definitely say it is convenient to have one :)

[@nanettesupreme4327]

Do you have a video on using the machine for double bias binding?

[@EchidnaClub]

Hi Nanette, we don't have a video on our channel but here is another video that may prove helpful: kzbin.info/www/bejne/j3eTZapqrbCjhas

[@Collect_Call_]

You threaded the bottom looper different from the Juki manual- at precisely the 2nd to last stage.

[@garywalker5394]

Hi Ryan, yes you are very observant. I did indeed. It should have gone right to left through the eyelet, not left to right, however it will make absolutely no difference to the performance of the machine. But I will get to correcting it when time permits. Cheers Gary

[@EchidnaClub]

Thank you for your feedback Ryan

[@ritashep60]

Excellent video! Was trying to decide if juki was the one I wanted. Bought it based on this video. (All the other videos are a waste of time). I knew how to use it right away. I love it but I am having trouble with skipped stitches using a stretch velour. Wondering where I can get help. ?

[@EchidnaClub]

@ritashep60 Thank you for your feedback and that's great you are enjoying your machine too! Have you tried the Super Stretch needles? www.echidnasewing.com.au/schmetz-super-stretch-needles

[@ritashep60]

I’ll give them a go. Thanks.

[@EchidnaClub]

Let us know if we can help further :)

[@danlast4726]

Hi thank you so much for this video.. do you know where I can find the binder compatible for a juki qvp1700 ?

[@EchidnaClub]

Thank you for your feedback. Here is the binder attachment which will fit the Juki qvp 1700: www.echidnasewing.com.au/mcsbinderkit

[@252jdw1]

Do you have to thread the needles after the looper each time. The manual suggests that you should unthread the needles if rethreading the looper each-time and then re thread after the looper

[@EchidnaClub]

Hi @252jdw1 - Yes these have to be threaded in order as they need to overlay each other in a particular for it to work properly.

[@angelaspaintings]

What if the fabric doesn’t come out easily after cutting the needle threads? I want to hem some pants and I’m having trouble pulling the fabric out after cutting needle threads.

[@EchidnaClub]

Hello! Here is a video that is really clear showing you how to pull the fabric out after cutting needle threads www.google.com/search?q=finishing+off+coverstitch&rlz=1C1GCEA_enAU820AU820&oq=finishing+off+covers&aqs=chrome.1.69i57j0i22i30j0i390l4.7400j0j15&sourceid=chrome&ie=UTF-8#kpvalbx=_BBSUYvO0FNiXseMPzJyIsAY22

[@petvesta]

I am confused! I am looking for a machine to sew a few different things but it seems I would have to buy many machines. I already have a Singer 4452 and then found out it is not what I want so maybe I can just get one additional machine. I think what I want is a machine that does flat stitch to sew the front and back of a stretch t-shirt. I would also want to eventually make a heavy fabric backpack with double stitch and padded shoulder straps. can any reasonably-priced machine do that and sew the edge of the fabric to prevent fraying?

[@EchidnaClub]

Hi Petvesta, it would be best to ring us to discuss your options if you are an Australian resident.

[@samanthafolger4878]

Hi! How do you recommend I cover stitch swim fabric? I keep getting roping and fabric slipping so it doesn’t look very great finished. I have tried every tension change I can think of 😭

[@EchidnaClub]

@samanthafolger4878 Have you tried the super stretch needles on your machine? Here is a link to them on our website: www.echidnasewing.com.au/schmetz-super-stretch-needles

[@kittydemeo]

do they have a comprable serger? I have just tossed my White 1994 serger to the curb, she has been an absolute beast to work with, and Im done! love the juki

[@EchidnaClub]

@kittydemeo Here is the link to our Juki Overlockers and Coverstitch machines that we have available (Serger): www.echidnasewing.com.au/machines/overlockers/?p_sort=price1%3Aasc&p_filters%5Bbrand%5D%5B0%5D=Juki Let us know if you need any further assistance.

[@robertaalbrecht2956]

Hi Gary, is there any way to slow down the speed?😮

[@EchidnaClub]

@robertaalbrecht2956 The speed can only be determined by the amount of foot pressure you have on your foot controller on this machine.

[@michiko8395]

Hello! I am having trouble with my left most needle (yellow). It skips many stitches and it almost seems like the looper just won't grab the needle thread. I've double checked the threading, put in fresh needles, and it still struggles, particularly when it goes over thicker parts (such as side seams when sewing a hem) and it just skips many (4+ ) stitches. Do you have an idea what could be the issue? Thank you!

[@EchidnaClub]

@michiko8395 Check you are using the correct type of needles and if using a four way stretch fabric or super stretchy fabric, use Super Stretch needles: www.echidnasewing.com.au/schmetz-super-stretch-needles If using a polyester thread, try using rasant (a poly core thread) as this reduces friction between the thread and fabric. If you are still having issues, if you are in Australia you can call us on 1800 000 360 and we can try and help you over the phone.

[@lidslater2617]

Aw - I also meant to ask should we oil it ...Im sure it would need oiling but there is nothing in the manual about that or where to put the oil, thanks

[@EchidnaClub]

Hi again Lid, you will do no harm to put a drop of oil on the needle bar or looper shaft. It probably is more important to have the machine service annually though! We have the where to oil on the MCS-1500N on our video list, so stay tuned!

[@nanettesupreme4327]

@@EchidnaClub What kind of oil is recommended?

[@darknessfierce4209]

I had the baby lock euphoria cover stitch and I prefer the juki MCS 1500 because each needle has its own threading path in the euphoria The threads would get tangled together. It was not good.

[@EchidnaClub]

@darknessfierce4209 This is an unusual problem. Have you contacted the people you purchased the machine with to see how to get things to run smoothly?

[@ignacio1943]

I recently bought the 1700 and now getting ready to use it. Could you please tell me the name of the recommended thread?

[@EchidnaClub]

We have Maxi Lock, BabyLock, Rasant and a generic overlocking thread. Also we do have woolly nylon as well: www.echidnasewing.com.au/?skw=Overlocking%20thread www.echidnasewing.com.au/?skw=Woolly

[@ignacio1943]

@@EchidnaClub thank you.

[@Mrcorronchis]

Can you advise on the latest cover stitch to buy for making bikinis ??? Thanks

[@EchidnaClub]

@Mrcorronchis The MCS-1500N is great for making bikinis, do also have BabyLock models as well as a Brother model. If you are interested, let us know and we can help you work out the best one for you!

[@garfeeld8884]

What are your thoughts about the 1500 compared to the baby lock euphoria?

[@EchidnaClub]

@garfeeld8884 The Euphoria offers different features that are great to have, the MCS-1500 is also great to use and stitches just as well as the Euphoria. They are both great for different reasons.

[@garfeeld8884]

@@EchidnaClub thanks

[@TrangDean]

CAN IT DO THE BLIND HEMMING SIR ??? AND HOW MUCH MAXIMUM THICK FABRIC .CAN DO ??? THANKS

[@EchidnaClub]

I am sorry this is a Coverstitch only, it won't stitch blind hem. The presser foot lifter does raise to 10mm which means stitching thick layers of fabric is achievable. Here is a link to our website with full information regarding this model www.echidnasewing.com.au/juki-mcs-1500-cover-stitch-chain-stitch-sewing-mac

[@junebanks4163]

What type of thread did you mention 13:50 ? And is the juki-MCS 1800 the upgrade to this machine ?

[@EchidnaClub]

Hi June, the thread is Rasant thread and the machine in the video is the same as the MCS-1800, it is an overseas model.

[@junebanks4163]

@@EchidnaClub okay so , purchasing either wouldn’t make a difference ? And thanks so much

[@junebanks4163]

@@EchidnaClub also for the Rasant thread , is it specifically cover stitch thread or anything from them is fine

[@EchidnaClub]

Rasant thread is a great all round thread from quilting to overlocking and normal sewing.

[@junebanks4163]

@@EchidnaClub alright thanks

[@tamimcclaskey4684]

Wait....what!!! Juki makes a binding attachment! How can I get this??!

[@EchidnaClub]

Hi Tami - here is the link to the binding attachment: www.echidnasewing.com.au/mcsbinderkit Great add on to the machine :)

[@tamimcclaskey4684]

@@EchidnaClub yes I found ur website. I thought Had to go with an after market one. Also, do u offer a clear presser foot? I have the MCS-1700

[@EchidnaClub]

Sorry Tami but no there isn't a clear foot available.

[@nanettesupreme4327]

@@EchidnaClub Wow I wish I had found this attachment earlier! So excited to try this out and hopefully it fixes lots of the issues I've been having.

[@altagraciareyes3276]

Hola como esta quiero la explicación en español si se puede por favor gracias

[@EchidnaClub]

Lo siento Grace, no podemos traducir al español. Agradecemos su interés en nuestros videos, gracias.

[@BensMis-adventures]

Why don't domestic coverstitch machines seem to have much room on the right of needles? The seem great for hemming but to coverstitch a whole side seam on a t shirt looks to be either difficult or not possible? Many also don't have the ability to put a sleeve hole over the bottom like on a sewing machine. Doesn't this make it difficult to do sleeve hems?

[@EchidnaClub]

@benandmichelledotnet Yes it doesn seem to be a design feature they could improve on but it would have to do with the size and features of the machine as well as costing. It wil be a matter of maneouvring the fabric to stitch where you need it to. It would be an adjustment as you are feeding the garment being sewn through the machine.

[@colleensmith5209]

does this machine need oiling?

[@EchidnaClub]

Hi Colleen, the Juki MCS-1500N doesn't require you to oil it. We suggest you have the machine serviced every 12 -18 months. The machine will be lubricated during this service.

[@howaresewn7738]

🌹🌸

[@EchidnaClub]

Thank you :)

[@thehappycallsteward2780]

I have a Juki MCS, no matter what I do I cannot get the left needle to be reliable on 3 thread stitching with lighter weight fabrics. It works absolutely fine on jersey knit or heavier fabrics. It has never been consistent out of the box. I regret not buying a cheap brother machine. I literally spend more time trying to get this machine to work properly than I do on my projects. I have tried all of the obvious “fixes” new thread/new needles/endless combinations of presser foot pressures/diff feeds/stitch length/tension settings. EVERYTHING. THIS MACHINE JUST doesn’t perform correctly with lightweight fabrics. I am not a sewing novice and I would never buy a Juki ever again

[@EchidnaClub]

Hi @thehappycalsteward2780 - we are sorry you are having a bad experience with your machine, were you able to take the machine back to your supplier to check out the machine for you?

[@thehappycallsteward2780]

@@EchidnaClub I took it into my local shop. We shall see what they say.

[@Fattiapples]

@@thehappycallsteward2780what did they say?