Taking Off Substructure ; Corner Recess (SIMPLEST Explanation) /QUANTITY SURVEYING TUTORIALS

[@drasikugilbert]

Thank you so much for everything you have done for us. I appreciate your effort and may Almighty God bless you 🙏

[@easyqs]

Kindly share our videos with your classmates

[@easyqs]

Thanks for the compliment.God bless you too for the support

[@siyatahmed21]

Naomi you are a good teacher for us we have benefited a lot from you we thank you 100% continue this spirit. I have shared your channel with different WhatsApp groups for civil engineering students they appreciated, so taking off questions carries huge marks in exam time plz don't stop it do alot of questions about septic tank, stairs and other critical questions that can come in knec exam

[@easyqs]

Thanks alot Siyat for your kind words and more for for sharing our videos.I am encouraged.I will keep bringing more videos for you friends.Thanks again

[@RichmondOduro-rl1dv]

Because some calculate the centreline as 2(11000+7000)-4(600)=33600

[@franklingreuben9743]

For sure I have viewed it also

[@KigeziTales]

Wonderful video,so helpful

[@easyqs]

Thank you so much ❤️

[@RichmondOduro-rl1dv]

So please I don't know why and understand why your centreline reduced to 6000 for the width

[@kikiedaystar1888]

Me too

[@AbushiekhVonga]

Well teaching thanks so much sister

[@easyqs]

You are very much welcome.

[@peterokitoi7757]

Also you said that we should use the centerline of the spread when calculating for soil reinstated not using the external dimensions and this is from following all the other examples plus introductory videos

[@easyqs]

There are two formulas but the end result should be the same.kindly note the difference.

[@denisekess6298]

Take us through taking off plumbing works please

[@easyqs]

Alright Denis,I will.keep tuned

[@alexkim3170]

Hey Naomi kindly do one theory on measurement and Estimation pls.we apreciate for the one you did on 2018.thanks

[@eddahwaititu5317]

This would really help

[@alexkim3170]

@@eddahwaititu5317 sure kwanza niko na knec nov civil Eng

[@easyqs]

Noted. Will prepare for this asap. Thanks for watching. Kindly refer us to your friends.

[@ManirihoRonald-ig5dx]

Thank you so much we appreciate you

[@hotmirrormarie5300]

Thanks very much, what about take off of column and bases

[@easyqs]

We have a video on that.. kindly check out our playlist on taking off sub-structure works

[@RichmondOduro-rl1dv]

Please check the centreline again for us ❤

[@Delano696]

Its good i got much from you. Can i get some pfds of these i print for more understanding

[@easyqs]

Yes..Kindly join our whatsapp group ..we always share the materials over there

[@Delano696]

@@easyqs share the link

[@sherilachieng-yz8hr]

Can you help me with a retaining wall video

[@CarolNkatha-bd1im]

Swali ya floor plan ikiwa na reinforcement ama bars

[@SandileMgenge]

I can see the first 400 u added wall but im lost for the second 400

[@norahwanja6080]

This is very good

[@easyqs]

Thanks so much

[@peterokitoi7757]

I love your work though this example had many errors, another was on the form work when you add 3/200 + 2000 + 4000 it doesn’t give 7000 for the internal width

[@easyqs]

formwork is usually done to the external dimensions of length and width as its purpose is to hold concrete which includes the walls

[@ledisonlekishep6247]

Kindly if you don't mind do a retaining wall taking off knec 2020 June/July ,,please I have this paper on 19th

[@easyqs]

I did a video on retaining wall.Hope you saw it.

[@MunachisoProsper]

How to prepare a Bill of quantity

[@perishiyhtuyuguhug.ujhgugm764]

Helpnwith finish taking off❤

[@victorkunga7077]

Can you do estimation for module 3 building/civil engineering plz Naomi

[@easyqs]

we have a playlist on unit rates

[@JoyVirginia-lv4zx]

How do I type a question before asking for solution

[@samorakwendo9815]

while calculating the center line, you are supposed to use the thickness of the wall but you used 600 as the thickness or it is me who is not understanding

[@easyqs]

I used 600 which is the width of the trench because the wall at the centre of the trench.Thus, the centreline of the trench is the same as the centreline of the wall.

[@peterokitoi7757]

I think there was a problem with coming up with the length and width for the excavated soil using the centerline method because why are using 11000 when that includes the spread yet we want the centerline of the brickwork and also the width has an issue compared to all the other examples

[@easyqs]

in this example we used a different ans simpler method to calculate centreline.whatever method you choose to use,the end result should be the same.Kindly check out our video of calculating centre line and you will understand better

[@WrestleManiamarto]

You made an error in calculating center line the width was supposed to be 7000 not 6000

[@easyqs]

Kindly let me know how you achieved this.

[@RicoThomas-vj4rb]

why does the width of the structure go from 7,000 to 6,00 but the length remains at 11,000?

[@samuelmorning-6502]

Probably while calculating the centreline, you are supposed to use the 7000.. as the width and not 6000

[@matthewsmukenya9360]

Kindly, when calculating width centerline of trench isn't it 5800 instead of 6000? Thanks

[@easyqs]

Kindly let me know how you achieved this.We also have a video on how to calculate centreline..kindly what it and confirm you have got it right

[@erickkariuki6151]

I have a question kindly

[@easyqs]

Kindly ask

[@nicholaskiplangat2259]

Congrats

[@easyqs]

Thanks

[@affluencephilip2458]

Made centreline calculation harder

[@easyqs]

Sorry,That's actually the easiest way to find centre lines.You just need to practice and you will surely love it.

[@seniorcounsel0992]

thumbs up

[@easyqs]

Thank you so much.

[@seniorcounsel0992]

I have learnt so much in your lectures, I knew nothing in taking off but now am at least 60%. Thanks so much.

[@mwanzajeff]

noma

[@AminaMasiko]

You are good teacher but you have to listen to yourself first before posting the video...I am trying to follow you buh you are not accurate with some dimensions

[@Umi-vp2dn]

too fast

[@easyqs]

Kindly check out other videos

[@ahmedyarow6244]

your contact