TAMIYA FORD F-350 HIGH-LIFT "Tips on transmitter operation"

[@rcroadtrain]

BEST - DEMO - EVER..... watching this is a lot easier than reading the manual..thanks! nice 1

[@jocktheglide]

great thanks man finally I know how to run my truck now with the MFC02

[@stephenlo6588]

Hey thxs to this video I learned how to operate my Tamiya Tundra. The instructional manual which came with the car was all wrong.

[@HiDeNomRC]

"TAMIYA MFC-02 (Pick-up truck multi-funktion control unit)" is used for a chassis. Four channels are needed for the control. I am using the "SANWA(AIRTRONICS) VG600 4WD (6ch)" transmitter.

[@applemaychen]

thank you very much for the video. It makes my lift much easier. Make sure you DO NOT get a digital trim version of radio. Has to be the analog trim to perform all the function in the video.

[@applemaychen]

how can you make the truck turn off then perform the false engine start? In your video looks like the truck is off. Everytime I turn on the MFC02 the engine will start itself ....... if you can show me, thanks

[@TheNitronaught]

@rctrucknut Ok, thanks, the rest is as standard though rite? Thanks again budd.

[@TheNitronaught]

Hey, realy like the truck. Are the lights and sound standard/out of the box? Please let me know. Cheers.

[@Cory420ful]

where did you get the tamiya and remote i really wont one cant find them

[@DJEvillincoln]

Great vid. A few questions... 1: can you run the truck normally while using the AUX input? In other words, can I drive & play music at the same time? 2: Do you know of a video where someone is showing the shifting setup? For the life of me I can't seem to get the shift servo to work during normal operation. Thanks!

[@jhaynet2004]

Hi, is the MFC-02 will work well on the Airtronics VG400? thanks...

[@JawidSmart]

hey bro, is it water proof?? please response i intend to buy one of those

[@sharad909]

where did you get that

[@kalishaROX]

whats the song you played on the external output in the truck

[@bondboym]

hi can you change gear or is it 4wd

[@mike_c-t7j]

what type and model of transmitter are you using, I know its sanwa but what model.

[@1967fordable]

how much am i looking to drop on something like that?or is yours custom?

[@bestamerica]

my tamiya F-350 is leave on 3rd gear speed while running.. no need change gear

[@vee3342]

just curious, how much does set cost?

[@mike_c-t7j]

Kingdom RC 400 + transmitter 100 and sound, vibration and lights optional 350$

[@Cory420ful]

can i buy that truck from you please

[@ThePashley5]

hey did the mfc 02 come with it

[@RC-ty5ym]

No, little idiot

[@737scotty]

can u send me that video

[@danishmuscle]

That was perfect!

[@fannell2000]

super

[@HiDeNomRC]

Regrettably it cannot do.

[@Nordmann61]

Somewhat unpractical to have to use the trim slide-button and stick for every command,. I wish Tamiya make a console that can be mated to the radio, with a multifunction turnsignal stalk, like on a real car with a steering column turnsignal stalk, which also have switches with the park-light, low/high beam, fog-light, push button on the end for the horn, like you see on many european and japanese cars, and buttons for hazard-light, roof- light, or what have you. It would be much faster and easier to operate when you are driving. In all the KZbin videos which demonstrate the use of the MFC-02, the car is at standstill, on the livingroom floor, not running, it says something about how unpractical it is to use when you concentrate on driving. Cheers.

[@DJEvillincoln]

+Nordmann61 I see what you're saying but this isn't real. I use the turn signals & the hazard function as a gimmick, not to signal to other RC cars that I'm turning. lol.... You're missing the point a bit I feel. It's a model kit.

[@ສຸກອັດຕະປື]

jaokdokd

[@rrr444422]

Он хоть ездит?

[@rokyle2323]

where did u get the transmitter

[@alecnichols33]

where did you get the controller