Tamiya Ford F-350 High-Lift Build

[@michaelchristianson3179]

I would like to offer a helpful suggestion. Go to the dollar store and get cupcake or muffin tins. Empty the parts bags into the muffin tin and tear off the letter of the sticker and put it on the corresponding muffin hole. It will help you stay organized and make the build more enjoyable.

[@shawnroy81]

the kit comes with instructions. As long as you follow step by step you should have no issues.

[@shawnroy81]

you need a transmitter, receiver, Speed controler and two servos,. Everything else is included.

[@creepa9]

well done man nice build. good commentary too.

[@shawnroy81]

Thanks...Appreciate it

[@shawnroy81]

It's a tough build but the instruction are good. You should be fine.

[@ericgrant9645]

love the build the transmission looked complicated but you made it look easy keep up the great vids.

[@shawnroy81]

I ordered a Junfac 4 link conversion kit which should give me enough room. I'll avoid trimming the body unless 100% needed.LOL. It's my first plastic body. I want to keep it in good shape

[@DieselJunkie12v]

I encourage you to get the Tamiya King Hauler 1/14 semi Truck. Funnest build Ive ever done!! nice build vid!

[@shawnroy81]

should have one soon. Thanks

[@DieselJunkie12v]

Sweet. When you do, you ought to watch JRP RC Judd Phillips 6x6 how to vid on youtube!!! performs a lot better

[@shawnroy81]

I really like it. Extremely scale but this is a project truck. You will need to put alot of hop-ups in it to get it to perform like the SCX10. If you check my playlist you will see what I have done to it so far. Junfac 4 link, RC4WD R2 trans just to mention a few.

[@rednexRC]

Best build vid on youtube.

[@shawnroy81]

I used hitec 645mg which is about 34$. They are metal gear with 130oz @ 6v. I waterproofed them with plastiDip and its good to go. I have never seen a kit that includes servos. RTR of this is close to 700$

[@shawnroy81]

I removed the stock suspension quick and replaced it with a JunFac 4 link system. I find the leaf springs look good but they don't perform well.

[@baldandbiking]

Im working on my second one now, sold the first one. Struggling with setup a bit but should all come out fine in the end. I love this truck.

[@shawnroy81]

It is a great truck. The trans is where I got hung up a bit. I could see it being much easier the 2nd time around.

[@shawnroy81]

You need an ESC, 2 servos(one for steering and one for shifting) Receiver and your transmitter. Motor is included.

[@shawnroy81]

should be running this weekend and I will get it posted hopefully no later than Sunday

[@gooodnews]

nice build

[@shawnroy81]

Thanks. Appreciate the feedback

[@bigwhop136]

Nice truck I have one coming and I was told the onky way to lower the truck wich I want to do is that i need to install a 4 link set. Do you know any tutorials on how to install them or any other way to lower the tuck?. Thanks ans keep up the great content

[@shawnroy81]

You can buy it as an RTR but its about 200$ more. Thanks appreciate the feedback

[@tamiyaclodbuster]

i have a highlift mine dint feel complet until i bought the bearings and the motor in the front plate the best rc truck but allot of money and time to make it complete

[@shawnroy81]

Thanks

[@snowmaxx3905]

*dieing to see it run

[@CWR2011RC]

Awesome build man

[@jacobdonohue4573]

just wondering can you buy this truck fully built or do you have to buy it in parts to assemble? thanks great build!

[@shawnroy81]

it's a great rig.

[@dale91000]

Does It have everything to build it with like the stuff for the transmission. And what Radio do you use. Please reply!

[@shawnroy81]

ya it's a pretty complicated first build. If your looking for a scaler and something a little more straight forward then your best bet is an SCX10

[@shawnroy81]

Thanks...Appreciate that

[@shawnroy81]

it is. They share the same transmission

[@everythingKoolstuff]

bon vidéo! Ca ou le scx10? (pour aller dans la neige- sur des roches ect.)

[@shawnroy81]

it is...I looked @ it as a project truck

[@joseluisleonsachez5507]

Muy bueno aunque falta la construcción de la carrocería. Gracias

[@shawnroy81]

José Luis León Sáchez thank

[@shawnroy81]

it would be nice but I run in the mud and water all the time so I dont think it would fare good in those conditions.

[@abadibi]

what is good for a first timer, i never had tamiyas before or builds like these but they seem very cool tho.

[@shawnroy81]

+Aba Dibi ya its a great kit but a complicated one. the cc01 is a pretty easy build.

[@shawnroy81]

thank

[@lprinceabyssl9181]

Does the bell crank and the link come included with the truck or is it separate

[@shawnroy81]

nice

[@shawnroy81]

hopefully soon...LOL....I'm itching

[@BTMONE]

I gotta get this

[@shawnroy81]

ya its a great rig

[@XXXtremercracing]

would you recommend this for my second kit

[@rcmctool2918]

Hey Shawn, Where was the ESC and RX mounted?? Thanks

[@shawnroy81]

+Tick Tock right under the cab. Their a flat platform that I used double sided tape to hold everything in place

[@voododd666]

Good video. So you didn't get the 4 wheeler stearin set up?

[@alecnichols33]

you need to get the mfc-02 so it can have sounds

[@joshfig96]

how much is one? and does it come with the grease?

[@shawnroy81]

got it @ greathobbies

[@aimanhajan3183]

Shawnroy were u buy the small screwdriver

[@shawnroy81]

dollar store

[@Javi-ce1be]

Where you bui it

[@rcmctool2918]

Hey Shawn, Just wondering if this F350 is Full time 4WD with all three speeds...?? Thanks

[@jacobbranton5210]

I want to do my first kit like this what do u recommend my first kit

[@shawnroy81]

no prob

[@XXXtremercracing]

if you bought it at great hobbies toronto i had that same kit in my hands days before you bought it

[@snowmaxx3905]

When can we expect running videos? I am diet

[@elscratchin2905]

How did u know what to do .. Looks so complicated to just open it up and start doing stuff

[@cartermoorerc9512]

Was this kit very hard to build? Would you recommend this kit? Would it be hard for someone who is building this as their first kit

[@shawnroy81]

+Cartermoore rc Because the 3 speed transmission I would say its a complicated build. A lot more than an SCX10 or something with only a standard trans. Lots of info and vids on the build that do help but I wouldn't say this is a first time build at all

[@cartermoorerc9512]

+shawnroy81 ok thanks

[@dominick871]

where did you buy yours from

[@shawnroy81]

greathobbies in mississauga

[@ras4782]

How much for one

[@swiftyt2963]

what shocks are used?

[@shawnroy81]

they are 130mm integy internal spring shocks

[@swiftyt2963]

thanks!

[@Nickysix6]

Do you know the wheel base of this truck

[@coreyslusher740]

Ultimate R/C MAN it's called Google, try it. Tamiya f 350 high lift wheelbase. 🤔

[@shawnroy81]

I purchased it locally @ greathobbies

[@yin7364]

這款原來已經是十年前出的,上星期買,還以為是新產品,但我的可以4輪轉响

[@actionpackedgaming2365]

Would you sell it

[@shawnroy81]

409$ for the kit and yes it comes with grease

[@bestamerica]

' i have one R/C tamiya truck F-350... leave 3rd gear, no change shaft, rear wheel drive only, front plain flat axle

[@RamonBolson]

i like

[@shawnroy81]

thanks

[@АндрейХуторской]

Сколько стоит и где можно купить это чудо ?!

[@TheMcooper17]

£550 all in?

[@shawnroy81]

I purchased the kit for 500$ CAD and then I had to add the electronics

[@shawnroy81]

its 519.99$CAD

[@rorcentralracingleag]

Or crawler king or wraith

[@TheMcooper17]

Want

[@masterhacker1989]

How is that thing, they seem wayyyyyy over priced to me, for the price I would expect it to be completely indestrcutible

[@shawnroy81]

Thanks...Appreciate the feedback

[@shawnroy81]

thanks...appreciate the feedback

[@shawnroy81]

thanks