ABS sensor fault on my MK1 Audi TT clean up

  Рет қаралды 44,418

House of Cars

House of Cars

Күн бұрын

Пікірлер: 22
@noel5ilv3rlake
@noel5ilv3rlake 2 жыл бұрын
Just in my case :)* Quattro BAM 2002 Problems : TC light on ( in some intermittent)* but back against n again for some years and permanently turned on I was though about Those speed sensors, cleaned up but it didn’t cure rightly I got some MIL codes; related to G201/G214, even to 4WD, Radio, etc etc and even replaced the Brake switch, 716 Relay related to ABS etc but yeah it didn’t cure the Problems ,plus all common fuses related Lastly :) I was thinking about something just happened to ABS system so the reason about G201 , I purchased the brake fluid dot4 class 6 ( SL6) from ATE, pretty thin designed for ABS / TC and I did flush those lines and scanned the car, cleared up those codes and DONE ! No code anymore No need ABS sensor, No need G201/214 everything just fine - even greater than before! You guys will not believe it ! Yeah I had also changed the haldex fluid too since probably time ! worthy try !
@Hasdac
@Hasdac Жыл бұрын
Wheel bearings hold the abs sensor ring. These corrode and confuse the sensors.. wheel bearing need change..
@boastyy
@boastyy 5 жыл бұрын
Thanks for the upload mate , much appreciated.
@TKhouseofcars
@TKhouseofcars 5 жыл бұрын
boastyy glad to help
@silentman316
@silentman316 5 жыл бұрын
@@TKhouseofcars when the light comes on do you feel that when u press the brake paddle there is some jutter or some weird knock back at the paddle?
@TKhouseofcars
@TKhouseofcars 5 жыл бұрын
Snakepit i didnt have anything like that tbh pal. Sounds more like warped brakes
@simonf7388
@simonf7388 5 жыл бұрын
Have had ABS light on constantly since I've owed my 2000 1.8. Got it through MOT as ABS was working fine, not sure if it's pure coincidence but have now managed to clear it and its working fine. All I did was cleaned the earth contact of the 3 wires that connect to the body underneath the battery compartment/tray. . I actually snapped the nut off trying to undo so have used the right hand tray mounting bolt as a fixture having cleaned the area below. No idea if this has anything to do with it at all, but all I know is its working great and no more annoying 4 beeps every time I turn the bloody thing on!
@simonf7388
@simonf7388 5 жыл бұрын
Forgot to mention I also replaced the alternator as mine had failed at the same time, put a 120amp one in instead of the 90(but makes no difference I'm told) again, no idea if that has helped cure the light or not either
@TKhouseofcars
@TKhouseofcars 5 жыл бұрын
Sounds about right. Thing is with electrics you can narrow down the fault but changing the part isnt always the answer so good job on doing what you did
@keithwilson8340
@keithwilson8340 4 жыл бұрын
Great video, thanks
@TKhouseofcars
@TKhouseofcars 4 жыл бұрын
Thank you
@Bagged.e38
@Bagged.e38 5 жыл бұрын
Did it affect to your speed ? I got the light on now and it feels like it’s loosing power around 2500rpm
@TKhouseofcars
@TKhouseofcars 5 жыл бұрын
Giorgi Beitrishvili no loss of speed for me.
@RhysCOYG
@RhysCOYG 3 жыл бұрын
Did you ever fix this? Got the same thing
@mikokol7308
@mikokol7308 Жыл бұрын
Thank you..
@SliipzHD
@SliipzHD 5 жыл бұрын
Traction control light? Ive got that on mine and getting a engine code 00810: sensor 1/2 for brake pressure, did you change your sensor?
@TKhouseofcars
@TKhouseofcars 5 жыл бұрын
SliipzHD i didnt change the sensor but i guess if this doesnt work it would be the next step. Could even be the actual ring where the sensor gets signal from. I would say do some research in relation to that code?
@SliipzHD
@SliipzHD 5 жыл бұрын
Channel Tee yeah ive got front disc and pads ready to go on em so when they’re off im gonna give them a good clean up
@TKhouseofcars
@TKhouseofcars 5 жыл бұрын
SliipzHD if you’ve got a wire brush you can attach to a drill that might really help with the clean up. Some of the crap on there is solid!
@teamimuscleuk38
@teamimuscleuk38 5 жыл бұрын
How did you clean it?
@TKhouseofcars
@TKhouseofcars 5 жыл бұрын
Just using the wd40/clutch cleaner etc and a wire brush did the job
@AR-lr1yx
@AR-lr1yx 4 жыл бұрын
Channel Tee Great Post. Have same issue on a very low mile (16k miles) 2001 TT 225 Roadster. Did you remove both abs wheel sensors to clean them or simply clean around them/in place? Thanks again for the help.
ABS WARNING LIGHT ON? FIX IT IN 3 EASY STEPS
4:05
2CarPros
Рет қаралды 8 МЛН
Why I Removed The Turbo From My Audi TT
13:02
Andrew Higgins
Рет қаралды 3,8 М.
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН
How To Fault Find Fan Problems Audi
22:51
The Parrott Bro’s
Рет қаралды 66 М.
MK1 AUDI TT ABS Speed Sensor Fix
11:41
MJH IMAGES TT
Рет қаралды 8 М.
HOW TO TEST WHEEL SPEED SENSOR, WHICH ABS WHEEL SPEED SENSOR IS BAD
5:30
Auto Repair Guys
Рет қаралды 493 М.
Das machen viele falsch, du auch? - ABS Sensor
19:11
cargraf
Рет қаралды 271 М.
A1 | SENSOR ABS | LIMPIEZA #audia1 #tfsi #abs
6:49
elMecanix
Рет қаралды 304 М.
Problema no ABS? Audi TT mk1 (sensor) Fácil
8:02
Fabio Cordeiro
Рет қаралды 4,1 М.