We test the RED RACER 12ga. Slug - Wild Results!

[@putteslaintxtbks5166]

Great to see Gregg back. If I didn't enjoy watching what different slugs did (though I do), I would watch for the Gregg entertainment value alone, plus, he's a great shot too.

[@phitfacility4115]

Hooray for og san

[@ganvalexposure2163]

Absolutely, Greg is the best and glad they've allowed others to shoot. 🎉

[@spaz13b]

I literally just came to the comments to say the same thing!

[@froggymj]

Great to see Greg back. Props to all the guest shooters that help make this great content. Thank you all for opening yourself up to scorn and ridicule to help out. Love the content Jeff and crew.

[@defaultdriftco00]

I’m definitely a longtime fan. I may not comment often, but I always drop a thumbs up

[@taofledermaus]

thank you for that!

[@defaultdriftco00]

@@taofledermaus no, thank you for great content! Even in Danny’s passing, you guys are always entertaining and informative!

[@waynemcdivitt3017]

You guys are still epic! Godammit I miss Danny! Love from Texas+

[@benjaminelliott4112]

That intro though...Great job, Jeff!

[@notsure2101]

Another fantastic video. Good to see Greg back behind the shotgun. Sad to hear commenters are not so kind to some recent guest shooters

[@gamestuff1959]

im glad your channel showed up again for me. i guess i was one of the 'unsubscribed' as i hadn't seen anything from you for such a long time untill the other day where i discovered i indeed wasn't subscribed

[@taofledermaus]

Welcome back!

[@danieljob3184]

Accurate at 12.5m or less. Good scientific results deserve scientific credit! Unfortunately, the Nobel committee doesn't cover ballistic munitions. (Bah! Peace prize? What's so noteworthy about peace!?) 😒

[@keith5419]

I truly enjoy your content as a reloder I really enjoy your videos.

[@taofledermaus]

thanks Keith

[@supremegodemperorpalpatine4872]

You take a slug like that through the lung, you can kiss that lung goodbye. If you weren't killed outright, you'll be wishing you were dead.

[@thomassteed390]

Great content as usual

[@FuckYouAndYourMadeUpPronouns]

Oh man. Gregg went into his joke vault and pulled out an Ike and Tina joke :D :D superb :D :D

[@FuriousMess]

OG on Taofledermaus with a great round. Maybe make a nosecone with the tungston core ang heat bond an aluminum base to it?

[@jackthemagiccat4571]

UK/Japanese resident here! I own guns in both countries and can say your channel is definitely popular UK and a small base in Japan but not just because it's stupidly backhanded to own firearms but remember 90% of what you shoot is slugs! I'd say the most owned gun in the UK or Japan is either a hunting rifle or most popular a shotgun so slugs for us are something we can get so it's always fun seeing the new stuff! Shame i couldn't meet up with you guys would of loved to have you round in Scarborough to shoot a few weirder firearm's in the UK maybe another time haha

[@taofledermaus]

thanks Jack

[@jackthemagiccat4571]

@@taofledermaus Ayyy I'm happy to hear that, always have enjoyed watching your content so to hear my country talked about was a bonus on top! People just usually make some jokes about us and leave but I do appreciate you seeing how hard it actually is guy guns let alone having to acquire two different licensees to own firearms or shotguns! It can be very exhausting but hey atleast suppressors are a dime a dozen in the UK and it's just like picking up a chocolate bar! Anyways thanks for the comment and best of love and wish for the channel!!!!!

[@HG_Budde]

Same thing here in Germany.. I've got a bit of a bi-polar relationship with guns; thinking that it shouldn't be too easy to get a gun without a process to maticulously make sure the person knows gun laws, safety and is somehow identifiable if their gun ends up being used for a crime, but at the same time loving them to bits without a particularly strong desire to own one myself. 😅 I too, as OG phrased it, live out my passion and love for guns through various US GunTubers like DemoRanch and Kentucky Ballistics - the reason I love TFM so much is my other interest: Science and SlowMo footage of it. This channel is "The SlowMo Guys of GunTube". 😁

[@jackthemagiccat4571]

@HG_Budde aye I feel say, well I personally think those things you mentioned should be the basics of even owning a gun, whether they could enforce it is another subject but that's boring, while I do still shoot guns and mess around with some weirder things I mostly live my own passion through those channels you mentioned I probably wouldn't of even picked up a gun if it wasn't for the channels getting me jnto them when I was a bit younger haha so yer KZbin was the start of my gun life! Also if you absolutely love slow mo gun footage, there's a recently new channel called "ballistic high speed" it's directly dedicated to testing guns in slow mo and the different effect, materials and ammo of all types I still love TPMs slow mo and explanation but if we are saying slow mo guys of gun tuber world they have it in my opinion but again TFM is OG of gun slow mo I'm pretty sure and they came up with a few ideas that another of gun tubers use now! To me TPN is like father figure or uncle who teaches you everything about your first shotgun haha got all that wisdom and age of experience compared to other channels.

[@HG_Budde]

@@jackthemagiccat4571 First, let me say a huuuuuge "Thank you!" for suggesting High-speed Ballistics to me! I don't know how that's even possible, but I've never even heard of it before and they probably are the best channel to satisfy my love for projectiles and explosions hitting and interacting with stuff in SlowMo. ❤️ Secondly, I have fired lots of different guns and that fairly often during my time in the German Army and it's only because I have witnessed what they can do and what happens if they are used as a tool to do what they originally were invented for, I don't feel the need to pick one up ever again. Without this, I probably would have tried to get one and would have joined a gun association. I honestly only watch channels that are either shooting, are shooting at silly stuff or do it for educational purposes, like Edwin Sarkissian or Smarter Every Day. I have not interest in channels like Garand Thumb, Administrative Results or 9 Hole Review, I don't care about the gun, but what comes out of it. 🤗 And yes, one might think that gun control, as practiced in the UK, Australia or in my case Germany, is just common sense, but the political right, the NRA and its lobbyists do a pretty good job with equating gun control and banning gunsentirely. They somehow convinced their listeners that all the countries that exercise gun control don't allow acquiring or possessing any guns at all and that's probably why so many of the conservatives are against it. Their entire conception of gun control is just fundamentally wrong - the US isn't the only country where guns exist outside of government organs, there are loads of other countries with private gun ownership; they just don't let anyone who wants one but don't fulfill the requirements like responsibility, mental stability or uneducated people seeing and using guns as toys, letting them lie around fully loaded everywhere in their houses. The funny thing is that if you asked them about singled out topics out of the pool of safety measures which gun control consists of, like having to do a mandatory course to learn how to handle guns and ammo, a background check or a 30 day waiting period, most of them will agree; but the moment you call it "Gun Control", they instantly become hostile.. it's like the conservative politicians programmed their minds or trained them like dogs to act a certain way everytime they hear it. They made this expression a fighting term to use to discredit even the most watered-down gun legislation and even things that have nothing to do with guns. Every time one of their opponents want to pass a law about something the right doesn't like, they only need to remind their own side that the guys who made this law "want to take all of the guns away" and voilà, the legislative proposal fails miserably. So, for all the anti-gun control guys: We, the "pro gun control people" don't want to take the guns away from the good guys, all we want is to make it harder for the bad guys to get their hands on a gun. Which should be in your interest, because less bad guys with guns means less bad publicity for guns and less feeling uneasy because potentially anyone could suddenly pull a gun on you. 🤔

[@kimgriffith1054]

Great test. I would not bet my life on that one. Hats off to the creator of this slug. Thinking outside the box leads to new discovery. Love to the crew. God Bless and Patriot On

[@moparedtn]

It's always so good to see OG and Jeff together on these - beyond the comedic "genius" these friends make together, they're also the last tandem that link us back to the older days of the channel, too. Yeah, I'm old - nostalgia sort of matters to folks like me. Well, I guess we can give up on the JB Weld theory now, eh? Gonna have to fo-real start welding these things together apparently.... - Ed on the Ridge

[@mcburcke]

Cool! Brian needs to make a G2 version of those with a metal base plate of some sort at the back of the slug to keep the trilithium core from being ejected...

[@taofledermaus]

He sent a couple other versions of this with a lead core and a copper core so I'll try putting a coin behind those.

[@mcburcke]

@@taofledermaus I was almost going to suggest the coin trick. Should work. (Since you live in Cali, there's probably some law against coin abuse..."shall not be more than 10 cents"...let's don't make OG an accomplice in crime!)

[@SafetyBoater]

He needs to drill blind holes instead of through holes. The slug needs to push the core too

[@ronbivins1323]

​@SafetyBoater bingo, that's what i was thinking as well.

[@secondarycontainment4727]

I believe the idea is for the core to be ejected / injected upon impact with a hard target or armor. He either needs to use THREAD SEAL (Loctite) to secure the smooth core (instead of JB weld that is viscous and probably evacuated when the press fitting was performed) or thread the tungsten core into the aluminum (as a screw in a tapped hole).

[@crankygunreviews]

I was having a really crummy day, then I started watching your video. The joking that O G does is just classic. I’m no doctor that’s not what you said last night ha ha. You guys just made the end of my workday a lot better :-)

[@gregorymehlhose1441]

Same here!

[@GrantLanning]

Demolotion ranch.....🤣🤣🤣🤣

[@imajusayit]

Far better than demo ranch. In my humble opinion demo ranch is more satirical than educational. I find this to be far more educational than those DR. I enjoy DR, but I NEVER miss a Taofledermaus (I think I spelled it right) I still haven't heard what that means. I heard OG say once the meaning is in a earlier video I apparently haven't gotten around to watchin yet. Will see sooner or later.

[@kinglionkayce]

​@@imajusayitr/whoosh

[@NvrchFotia]

Competitor to the well known youtuber Desecration Ranch

[@sasquatch440]

Destruction blue cheese

[@Chrishelmuth1978]

​@@imajusayittaofledermaus is German for bat.

[@PsychoticBovine]

I'm a long time viewer and thankful that you read comments. Even my stupid ones.

[@taofledermaus]

lol

[@nelsonbergman7706]

Thanks to Brian and the OG (Original Guest [shooter?]). Another enjoyable video.

[@taofledermaus]

Thanks! I actually had a dozen or so guest shooters even before Gregg found me. Chris, Tony, Uri, Scott, Darren, Matt, etc.

[@Chris_Garman]

To the slug maker: For the next version, make them oversized and crimp them to spec in a hydraulic hose crimper. If there is any space in the penetrator's hole behind the penetrator, the body will crimp in behind it locking it in. The ribs left by the crimper die should result in excellent rifling engagement.

[@krisbuildit5149]

That’s a really great idea!

[@mrrooter601]

updooting so someone is more likely to try this. I really want to see 2000fps with a penetrator against some armor!

[@azmanabdula]

Someones thought about this

[@doejohn8674]

Great idea!

[@LukesJukes]

commenting for algorithm engagement!! We need to see this done!!

[@heywardmorgan7699]

Really nice to see OG again, hope he had a wonderful trip, always great to hear the TFM commentator Mr Jeff and see what he has in store for us. Sure wish those gifts would hurry up and get here😊😂😅. OG made a really good point about some of the other channels, been following the ranch dude since he had 1500 viewers and commented a few times, but no response, however, this other guy who was doing science experiments and a little bit of gun stuff popped up after Matt's video one day. I have following him every since, dog gone, he responded to my comments, and I'm still following his channel today and have see some great stuff and people ( like everyone else, really miss Danny even today). Three channels I know will respond are TFM, OG's danger show and Kentucky Ballistics (would like to you guys do a couple collaboration's). Have a great week guys.

[@Dep5455]

Too bad these didn't work out as planned but an awesome video nonetheless. Glad to see OG back as well.

[@djshnibz]

Love how informal and fun this channel always is, the chatter after the tests is 👍

[@taofledermaus]

Thank you!

[@bottegadellorso]

I love 12 gauge, in future I try to shoot a clay whit similar rounds on my video👌👌

[@incy55]

If you have more slug like this one (or similar) Maybe paint the back of the core a bright color so you can tell if it's in there in the slow motion. Basically like your black stripe, something visual.

[@rgpark69]

Don't read this comment. I dare you.

[@nateterzano8863]

Damn!

[@SquireJethro]

“Says Ike Turner” 😂

[@tomhandel9176]

Wow, old Obi Wan sure got vaporized with that round! Not the most accurate round but it sure packs a punch. I'd say Bryan is on the right track with it and can refine it a bit. Gotta say that all your contributors of rounds do a great job and put a lot of work into it. Thanks

[@imdaogsee3648]

Drill and pin, perhaps? Drill through the aluminum outer and have it lock through the tungsten with a pin to hold it all together. Brass pin would allow the core separation if that is desired,,,

[@carlubambi5541]

The mass accelerator will make it go through the lead plate with ease

[@wudznutt6732]

The Tungsten has considerably more inertia so it should back out of the slug in flight but maintain velocity and travel farther. If the Tungsten core had been tapered and epoxied, it would have stayed together.

[@geesixnine]

There you go, epoxy!

[@dentalnovember]

You do give things away on this channel. Information, excitement, knowledge, and humor. The wanna be scammers who are poseurs can suck it.

[@Kingdoms.Kobolds_81]

Was thinking if the tungsten rod was a barbell instead, then the lead/aluminum outer shell could be poured around it to lock them together

[@Mr.Unacceptable]

Maybe pour lead in to hold it.

[@duaneperkins8329]

I hated to see the Obi Wan being shot, but that was a great hit! Really wish the slug stayed together as it looked like it would be a great round. Maybe a different powder for something a little slower (1,200 instead of 1,800-1,900)? Great video as always, and great to have OG back!

[@mfreed40k]

Disney did far, far worse to him with their latest show.

[@MarkoDash]

obi-gone

[@carlubambi5541]

Anyone have a good slug load for SR 4756 1. 1/4 oz diablo slug

[@sirskidney7998]

They’ve put the band back together! The Boom Brothers. Great video guys and great to hear the banter again of my two favourite you tubers. Hey OG, when are you heading down under? Wouldn’t mind buying you a beer 🍺

[@roberthoffmann6603]

I remember this Chanel was my first Abo, and today i am 47 and i enjoy every Video. Greetings from Vienna

[@richardhillier442]

Point blank never fails!😂 O.G. nailed it!😊

[@jimmyhardin6366]

Glad your back, Greg. As usual a great time enjoyed it

[@longlowdog]

As one of the guys fortunate enough to meet with The O.G and his utterly charming travelling companion I just want to say he is a humble, approachable, decent guy. If you need a best man, a wing man or someone to lead the charge for someone in distress he's the guy you want leading or by your side. The internet O.G is the real O.G. It was a pleasure to spend time with him. Thank's Jeff for giving him a moment to speak of and to us. Regards from Scotland.

[@brolohalflemming7042]

But did you take him on a hunt for wild haggis? They're so much tastier! Or, did OG sample it's delights?

[@longlowdog]

@@brolohalflemming7042 season doesn't open till the 1st October or he'd have been welcome to bag a brace on my wee place. I've got landowner tags for 3 brace this year.

[@OGsDangerShow]

Thank you again Angus! We had a blast with Molly and Jo. Stay safe over there.

[@sameregarde]

thank you jeff and officer gregg every time you make a video ,i know its gonna be a excellent one

[@bobbyvigilantwatchman403]

Great content guys i can't get enough of ballistics and the crazy different slugs love it and its always fun seeing OG making an appearance 😂

[@taofledermaus]

thank you

[@TheSteve1175]

Welcome back OG you were definitely missed 👍🏁

[@OGsDangerShow]

Thanks Steve.

[@brentkeller3826]

The intro, I still recall KZbin dinging you for "too sexy singing". OG, back from scandalously destroying free range Haggis and recruiting overseas agents into the Special Guest Shooter program, takes revenge on the ballistic gel! Tune in next week when our old adversary Ballistic Booger rises from the grave! Will our heroes defeat Ballistic Booger once and for all? Only one way to find out! (Halloween Special coming?)

[@hickboyjusthick698]

I do love watching Jeff and OG! Of all the current guests Greg is my favorite. 😊

[@MrGiXxEr]

1st. Fight me!

[@BEder-it4lf]

The Slugs of the Gods! Or, The SuperCar of Slugs. European Precision Uber Slug! Next James Bond movie.

[@thatguysky123]

Good to see OG back behind the gun ❤

[@joearledge1]

I feel like I'm missing something... if you're gonna put a tungsten core in a projectile, why would you drill/ream all the way through it??? I'm new to machining, but not to physics or shooting. If I was making these, I'd probably go with steel for the body since it's not full bore. I'd have shallow grooves on the body running from base to nose to aid in the sabot/wad gripping it(not an issue in these tests). For the core, I'd ream for a 0.0005" to 0.001" press fit/thermal shrink fit. The pocket would only be 1/2 to 3/4 of the way through the body. I'd then drill the tiniest hole I could, the rest of the way through the body, to allow air to escape the pocket when pressing in the core. Again, new to machining, so I may be off by a mile for some reason.

[@JT-cloverbottomt]

Jeff and OG, I love your channels! Great shooting as always OG and congratulations on retirement and the Idaho compound! Much love to you both!

[@OGsDangerShow]

Thank you sir.

[@supergeek1418]

I'm beginning to lose my faith in rifling. Last week it didn't correct for bad aim caused by loose optics, and this week it didn't cause the slugs to hold together. Could it possibly be that rifling *DOESN'T* make everything better???

[@GordonPhillips]

Another great Video from Tau and OG!! Hey OG - wasn't "Tactical Melon" your stage name in the early 80's? Anyway, great stuff boys!!

[@TheSleepingonit]

Furnace cement is much stronger, on a cold car exhaust leak, feather it over the hole, let it sit for a hour, then drive until the car is warm. Not sure if you could do that with shotgun shells, but it burns at 2300, JB weld burns at 300

[@randlerichardson5826]

That big stuff in the gel the wound track is where the slug tumbled looks good I figured it would pass through great video y’all and GOD BLESS her little heart be safe and GOD BLESS

[@soho71]

O.G. Greg, your our only hope! Nice shooting Kid! These are not the Fledermaus you are looking for. Ok, I’ll show myself out… 😂

[@TheNetsrac]

Late to the party, but thank you very much for the video 👍🏻 Very nice slugs even if the results were very random Watching the videos here and on OG's channel, is always good entertainment you can trust, and hey I'm learning something as well. I'm not getting any smarter... that ship sailed away and sunk many years ago 😜 I've always felt like being among friends on your channels, which is why I'm still around Thank you for being who you are, and keep doing what you do 🫂

[@schiltronmunitions3820]

Man...if that slug had been counterbored for the core instead of a full-length, the results likely would have been way better. Still pretty neat; the mannequin shot might explain the Kennedy assassination. 😂

[@witiwap86]

I'm sorry OG, but I have bad news for you. I think you might be a sith. Not only did you feel the force but you remorselessly shot Obi-wan in the face. Not one of those ones with the spinny lightsabers. They don't make any sense.

[@ulfhedtyrsson]

Damn that sucks. I was looking forward to this one. Perhaps it needs a full jacket or maybe a tig weld on the bottom.

[@christianshipley7472]

Maybe if the carrier wasn't drilled all the way through the tungsten core, it might stay in. But what do I know lol😂. Are British cousins, I think are rethinking the no firearms deal l they got over there. Especially with the influx of migrants & refugees.

[@imajusayit]

Long time viewer, 1st time commenting (I think). But I'm a CNC machinists for many yrs now. What if the tungsten was drilled out to help relieve some pressure, as well as knurling/press fit w JB weld?? Either way, another great video, thx for the new info. Good to see OG is back.

[@joshuagibson2520]

Being a machinist, how would you go about drilling tungsten carbide?

[@Kualinar]

How do you drill the hardest metal there is ? Tungsten is both very heavy and incredibly hard. Then, there is tungsten carbide that is even harder...

[@108gk]

Diamond cutting tool?

[@Lyndonberg_Gaming]

Thanks Jeff/Og for keeping community safe scammer pinged got email note of reply was gone before I clicked reply, on it like a car bonnet guys, epic vid as always glad Og had a good vacation intrude to see the other mass accelerated projectiles you guys got coming up

[@larryhein2943]

Missed you OG. Welcome back.

[@alexanderthomas2660]

That was a perfect hit on OG Wan Canopy!

[@3gunshooter60]

I did win a bear creek .22 ar from OGs show. Thanks for that OG, that thing is awesome

[@OGsDangerShow]

Glad you dig it, sir! 🤘😎

[@bullittdog4352]

He missed the mark on these slugs a little..should have made the core hole blind, might have helped the aluminum slug and core material accelerate at the same rate. It’s awesome seeing OG back and the flow of banter is one point. I was really hoping that this video would be the one where Jeff announces he’s ditching commiefornia for an adjoining compound in the wilds of Idaho!

[@Scott_C]

Making fun of Demo is awesome. Love his channel too his content is just diffwrent. Speaking of Demo. I noticed your shirt store under yhe video. You should consider switching to his shirt sevice. You may get a better roi on it .

[@garyjohnson5069]

As a keen but frustrated British shooter I learned an interesting fact today. Although you are allowed access to some fantastic firearms your government doesn’t think you can be trusted with the humble hover lawn mower and they are-banned in the us. who’s laughing now!

[@NINEWALKING]

Do not getting why drilling true complete aluminum slug? Why not stopping like 1/4 inch short creating the cup so that bottom of the slug is support for the core? Or even stopping halfway so there is more meat behind the core.

[@arouetmartel5054]

Happy to see Officer Gregg back🙂 OG the shooter with a PERSONALITY, LOL!

[@SgtJones-tz1sq]

That Obi-Wan Kenobi coffee mug was a 1997 collectors item and worth about $20 😂😢

[@TrickyDickyP]

Bad design.. get the maker to use alloy bar stock and drill a pocket leaving a 10mm blind at the bottom to stop the T core from coming out of the back of the slug.. that should fix it.. 😊

[@jrcrandall8548]

I have some explosive rounds if you would like to try them...I made em...slug with no jacket

[@snakezdewiggle6084]

Well, at least OG is rockin' the Welsh haircut 😆 Great job guys👍

[@EggBastion]

wot? you mean they stole 'is hair? I remember one mornin I got up and I found my own head propped up on bricks, bald as eggs

[@allenl9031]

O.G.! O.G.! O.G.! Today Ret. stands for returned. I hope he didn't have too much fun with the sheep.

[@mechsgtpuma938]

It is true what greg said us brits do watch as gun ownership is very difficult in the uk step 1 a medical £160. Then the police take a look at you and your neibours then roll a dice if it hits 6 you get to toss a coin and the police call afrer the coin has landed. LoL i pretty sure thats how it works.

[@recceeboy1237]

Did i hear Gregg say O G wan kenobi, he also snuck a bunch of kati wampu in the segment and you did not say the s. Probably 1 too many sheep.

[@DJPitBear]

Don't worry your spreading it all over 😮😮☹️☹️☹️🤣😂😅🤣😂😅🤔🤔

[@anthonyhodgson825]

So for a stronger bond you'd need to what? Temperature differential press fit? Course they'd need to be sized at point of manufacture.

[@paulstan9828]

Ha!!! Thanks always fun. Nice to see the gang together. OG’s sense of humor always keeps us laughing.

[@flapjackson6077]

“Says Ike Turner.” 😂 Classic OG! Great stuff, Jeff, even when the test ammo is squirrely! 🤙

[@alantominack4774]

Need OG to take command when the zombie apocalypse starts. We all know it's coming.

[@SuperDerfmaster]

For the slugs withe the heavier core, perhaps a solid back and the core set in from the nose, and secured with JB Weld.

[@magooevans1]

Brain should leave a thin web at the bottom of the slug body that the tungsten core sets in. Instead of a through hole have it like a counter bore. This would eliminate the need to try and “glue” it in place.

[@mckeownsa]

Do you think it would be possible to taper the tungsten core with a matching taper on the aluminum? Hopefully the slug would stay together until it hit something.

[@dakr3464]

Why not step drill the body that holds the core so it can't slip thru like a cone! Or get fancy and thread the bullet. Oh shit I guess u can't thread tungsten, but step drilling it to a cone so it can't slip thru is the way..

[@renedupont6116]

When the core flies out, one has a hollow round which might explain the remarkable stability. In order to hold the core, do not bore through but keep an alu bottom or screw in an alu plug at the bottom

[@boonedalton6201]

I think if he would of cast the aluminuminuminum slug around the core instead of drilling a hole and JB welding the core into the slug it may have held together..

[@LimitedGunnerGM]

For dissimilar metals, has anyone tried the Bitteroot process? It makes great bonded core bullets.

[@deltab9768]

I second the idea of not drilling all the way through the slug, so the core can’t easily slip out. I also wonder if a threading die would work on a tungsten rod…

[@thetoasterisonfire2080]

It’s a shame the cores didn’t stay in the slug, was looking forward to see my favourite metal make some holes.

[@stoatystoat174]

Good to hear you had good time north Scotland :) (Edit: comment de-waffling)

[@meanman6992]

Before watching the first shot just gonna say if your core is the heaviest component to a projectile, having an open rear invites failure.

[@semperanticusphotography3749]

The guest shooters have been great, and brave to step into the youtube wasteland, but great to see the OG/Jeff band back together!

[@davidjernigan7576]

The core coming out may be the cause of the inconsistent point of aim.

[@marcthompson2118]

It was great to see the OG back. Too bad we didn't get one of his infamous finger wiggle. 😂

[@derwingonzalez7342]

you should do a monthly lead plate compilation. .... it'd be a simple but fun series plus easy desirable content for you to post

[@NowanInparticular]

Who knew? OG must've used the force to get the shot back to center, but overcompensated & got the hip