you are awesome your videos are funny and educational I am a small engine mechanic at a dealership and watching you I learn different ways of doing stuff keep up the good work
@jordanfriar87323 жыл бұрын
Taryl yall need to reshare this for the new subscribers haha this is the very video that I first subscribed to
@toddluns111 ай бұрын
Man where was this video when I needed it a few days ago. I rent one from Lowes and spent more time fixing it than actually using the damn thing. Lowes was real nice and gave me one free day for my troubles. Shouldn’t gave charged me anything. Hondas rock….Lowes blows.
@blinko6568 жыл бұрын
You guys are great...:) Im a retired Firemen(pretty much disabled) but I keep going.. My wife is a big help for sure. Anyway we supply water to Cal Fire in the Summer. My problem I have a Berkely Pump Bzrm. It is located under the water truck. PaTO driven,, The shaft is spinning but now water or it is intermittent. Im thinking dirt in the impeller? Also the bearing is shot, loud whine, it is 16 years old. Time for a rebuild? I thought so. MIke Sacramento.
@Robby4Jesus Жыл бұрын
Thanks Taryll good useful info, and fun to watch😂
@chainsawchips7 жыл бұрын
Ok, it was funny. It was sick. I almost threw up when that crap spilled all over your shop floor. ...I loved it! Imma take your advise next time I work on one of these and use rubber gloves.
@bagermaster-club2 жыл бұрын
The pump is great! We pumped the sand to the beach with such a motor pump. A Bagermaster suction nozzle and a raft were used. It is possible to deepen the berths
@benclements10225 жыл бұрын
It’s best to use a silicone based lubricant on o-rings and other rubber parts. Vaseline is petroleum based and can cause the part to fail sooner.
@howardreeder10189 ай бұрын
You're the bomb dude!
@ossielbuceomedialuna66106 жыл бұрын
very good tips and with that video it help me to undestand thanks a lot amigo from Mexico....
@ukghconst3 жыл бұрын
Where can you buy that one-way valve on the suction side. That stop water running down the suction pipe?
@ne8r10 жыл бұрын
Exceptionally informative.
@TarylFixesAll9 жыл бұрын
Robert Carpenter Thanks Robert, Usin a pump for that fountain? Now theres yur dinner!
@CCDProductions3 жыл бұрын
Dude i lost it when you started eating the turd
@MailMan16T9 жыл бұрын
I never thought about that shim. Im going to give it a shot.
@TarylFixesAll9 жыл бұрын
MailMan16T There's your dinner!
@notajp7 жыл бұрын
Taryl Fixes All j
@OutdoorfixLLC6 жыл бұрын
@taryl I have a BE TP-4013HM, it is brand new and will not prime, I've check the seals, master seal looks good no burning, I've checked the inlet flapper and everything, but I can not get it to prime. the impeller is the key style that doesn't thread on, it does not have any shims on it. im not sure what else to do other than to rebuild the entire pump and seals. but its brand new
@davidabraham387310 жыл бұрын
the dip stick is showing that it is full i will try changing the oil thanks keep up the good vids TARYL!!!!!!
@cornwasher10 жыл бұрын
love the vids. Just hope I don't get invited to dinner.
@PrakashKumar-hi6mj6 жыл бұрын
Honda WBK 30 carbutead Hi
@basitbasit405 жыл бұрын
very nice work .
@EddieMoonWalker3 жыл бұрын
4:41 thankyou for this!!
@peterwong84608 жыл бұрын
do you have video on WB20X model, or its just the same as WT30X
@arthurlisogor10406 жыл бұрын
Right when you cracked the pump open I couldn't stop laughing I also thought that thing you found was a pickle
@joaquimdasilva65182 жыл бұрын
Hi sorry for my english !!! my AP 125 dont pomp watter I changed the seal between the water tank and the engine (non-original seal) and since then it no longer sucks up water. The engine is running but the water system no longer works ! i need help please
@homeodfree92007 жыл бұрын
Don't know if you're still looking at these post. But I have an old Honda WT20 with a G200 engine. The pump sat out for about 6 years and a lot of things when bad. Motor is good but gas tank is shut and can't find one any more. I wanted to replace the engine with a newer one, however when trying to take the dam thing appart I run into an issue with the casing, it calls for it to rotate about 30 degrees counter clock wise, prior to removing impeller. Problem I have is don't know how to move that casing it seams ceased and hove no idea how to or where to hit it to make it rotate. Have you worked on these type of trash pumps? Any tips on how I can make that casing rotate?
@alexgoldstein75535 жыл бұрын
Dude You just pulled a Bill Murray when he cleans out the pool in Caddie Shack, should have at least had a bite!
@markjohnson75083 жыл бұрын
Makes dirty jobs look clean taryl
@dmechx7774 жыл бұрын
How do remove a impeller off a Honda wh20x? There’s no access side cover to tap the impeller. I tried unbolting the side of the engine case but it won’t come off please help thanks
@sumanmondalsuman76354 жыл бұрын
Thanks sir Engine back Starting problam solpe kaica hogi help me
@billmalec2 жыл бұрын
The whole Stuhl family. Braun Stuhl Lucy Stuhl Steinke Stuhl
@kevinleee3408 Жыл бұрын
Lol candy bar in the pump
@kevinleee3408 Жыл бұрын
Oh you think they've been pumping poo poo with that😂😂😂😂😂😂
@MannyFontes19687 жыл бұрын
Hi Taryl, I see you have a pressure washer behind you there and was wondering if you have any videos about fix them. I have one that won't start even after changing the fuel, checking the spark plug gap, and spraying some starting fluid in the carburetor. Do you have any advice?
@cornbobrimlove78927 жыл бұрын
make sure the kill switch is set to "RUN" or "ON".....check for spark by stcking your finger in the spark plug wire and very slowly pull the starter cord. It should shock you. If it doesn't, the ignition coil is most likely bad. If it does shock you, then it's probably the carburetor that needs cleaned or rebuilt.
@davidabraham387310 жыл бұрын
hey taryl i have an old tractor transaxle that when it gets colder outside it doesn't move any more what do you think the issue is
@TarylFixesAll10 жыл бұрын
Is it a hydrostat? If so, you may have to change the trans fluid... Or it might just be low.
@Thebald17 жыл бұрын
what would cause the pull cord to be hard to pull and sometimes it will snapback and it jerksthe cord from your hand.. I bought this pump and it was a display model.. 6.5 hp 9540 gph
@williamwalker59847 жыл бұрын
check your fly wheel key could be partially sheared
@fernsader92618 ай бұрын
With us it was the spark plug. When it’s in too tight it won’t pull. When it’s too loose it pulls freely. It’s gotta be on just right. Also we pull it with a cord strap we took off that attachment
@kennedysingh39168 жыл бұрын
Thank you
@kopa197619766 жыл бұрын
Кому интересно, в двух словах и по русски: зазор между крыльчаткой и корпусом должен быть от 0,4 мм до 0,8 мм. Автор намерил больше 1 мм и понизил зазор. Для Honda wt 40x номер регулировочных шайб: 78122-YG2-003.
@nychillboy87246 жыл бұрын
Hi Taryl, could you tell me where I could find vin/model # please?
@jhitt797 жыл бұрын
I'm a maintenance mechanic at a wastewater treatment plant, that would be just another day at the office for me. (Probably cleaner actually)
@GreenPowerFarm10 жыл бұрын
awesome!!
@micktaylor25007 жыл бұрын
Hey mate i am having trouble with my honda trash pump it wont suck the crap out of septic
@botlucky99826 жыл бұрын
Honda pump heat solve the problem please sir reply
@TheSiameseRat8 жыл бұрын
You'r welcome!
@georgiacitizen717510 жыл бұрын
That video was the "SHIT" !!! Thanks for sharing! Several of your videos have REALLY saved my AZZ!!! Thanks !!!!
@blinko6568 жыл бұрын
Never mind, just remembered I left a bath towel in the tank when I was cleaning it. Duh, I hate getting old...Oh well.
@petersallander69134 жыл бұрын
It was great up till went eat the fake log lol
@llewvirtue8613 жыл бұрын
That's classic
@DILEEPKUMAR-ym7zf6 жыл бұрын
Sir mera engine water kam kyon deta hai Reply please
@Mr214playa9 жыл бұрын
what's up shitty man I looked your video haha pops still needs help with this pump is the same exact one help!!
@jordanfriar87323 жыл бұрын
Or redo it!
@rockytoady58755 жыл бұрын
at the end i thought this might me German
@SteveOfTheMountains9 жыл бұрын
Holy $#!7 what did I just watch!?
@victormartiny75998 ай бұрын
Nice teeth 👍🏼
@franktorres189810 ай бұрын
It did not pump
@kermitfrog31073 жыл бұрын
Do you not own a work bench? Why the bad attempt at the Red Green comedy? I just want to fix my pump, not watch dumb comedy attempts.
@brianmoore1648 Жыл бұрын
Funny
@majorpayne52893 жыл бұрын
👍💩💩😂👍
@skyartrc82864 жыл бұрын
does it run lIke sh*T
@scn1029 жыл бұрын
wtf bobby
@theone9564 Жыл бұрын
Poop shark😅
@johnaquino42914 ай бұрын
Of all the stupid wastes of time - was this supposed to be humorous? A total waste of time.
@yyabay3 жыл бұрын
offspring wastes...
@JosephSithole-te7ii Жыл бұрын
You are acting like zombies
@fire83906 жыл бұрын
What happen to your teeth
@jordanfriar87323 жыл бұрын
Taryl yall need to reshare this for the new subscribers haha this is the very video that I first subscribed to