Thanks for your video! We thought for sure our pump was just broken and we were going to have to buy another. After following your video, we found a jammed rock! Thanks again for the clear instructions!
@smalltownmachineshop68602 жыл бұрын
I’m happy you found it useful, thanks for watching
@glennporter25902 жыл бұрын
This was an excellent tutorial It was clear and concise, and showed me everything I needed to know. Thanks for the tip about the shim kit too.
@smalltownmachineshop68602 жыл бұрын
I’m glad you found it useful and thank you for watching
@patjfree3 жыл бұрын
Thanks. I got my fire pump working. I recommend adding "Honda water pump pull cord stuck" to your title somehow. (I hadn't heard of the term trash pump) Took me a few other videos to find this one. But glad I did. Thanks again.
@smalltownmachineshop68603 жыл бұрын
Thank you, that is a good idea to make it easier to find
@musaadewoyin87662 жыл бұрын
Excellent tutorial, straight to the point. Thanks!
@smalltownmachineshop68602 жыл бұрын
I’m glad you found it useful
@frankpapineau72993 жыл бұрын
Great video. Simple, straightforward. Followed the directions and freed up the pump.
@smalltownmachineshop68603 жыл бұрын
I’m glad you found it useful, thanks for watching
@ryanhendricks70383 жыл бұрын
Thinking about picking up a trash pump so I figured I better learn how to fix one first. Nice video!
@smalltownmachineshop68603 жыл бұрын
Thank you very much for checking it out, the pumps are really similar from brand to brand as well. They all come apart pretty much the same
@Markharv2 жыл бұрын
Very helpful! Thanks! Scary forearms...wish I had those for 500 pounds of torque!
@smalltownmachineshop68602 жыл бұрын
Lol they come in handy
@bagermaster-club2 жыл бұрын
This is a motor pump for medium dirty water, which is why it takes so long to clean it. A motor pump for very dirty water is easier to clean. this motor pump has an index of WT30 (or 40). Complete with the Bagermaster suction nozzle, you can pump out debris from the bottom of the lake
@smalltownmachineshop68602 жыл бұрын
Yes, this is one they took the strainer basket off the end of the hose and plugged it pretty quick
@Brush0akie3 жыл бұрын
I bought one for a fire pump last year, drained water & stored in shed over winter west coast of California. Spring this year I pulled starter cord to turn it over a bit and it’s stuck tight. Like a bulls butt hole in 🪰 fly season!!
@felixferia60912 ай бұрын
Good job
@robertshannon4433 жыл бұрын
Thank you,You we’re very helpful!
@smalltownmachineshop68603 жыл бұрын
Glad you found it useful
@Mike-wh9dq Жыл бұрын
Great comment about torque method!
@bavariabearfan4 жыл бұрын
Nice a new video Keep em coming, I like what you do.
@smalltownmachineshop68604 жыл бұрын
Thanks that very appreciated
@josephbalint4125 Жыл бұрын
Damn rat used my pump to store its nuts... I need to cap the outlets next time. Thanks for the video!
@amnovie6 ай бұрын
Nice straight forward work. Id that doesnt work, a shim pack may be in order. Thanks
@larrycrosby3023 Жыл бұрын
Hi, I have 2 Honda water pumps WPM20X, 3 and 4 years old. Bother pumps ha a sticky valve problem. What can I do to repair?
@TheReinholz3 жыл бұрын
How do you remove the IMPELLER? I have to replace the mechanical seal thats behind it...
@smalltownmachineshop68603 жыл бұрын
Remove the center bolt or nut depending on the model and gently tap it off the shaft, sometimes gently wedging from the back with wood helps
@cbowman752 жыл бұрын
I use a lot of Honda parts on the Harbor Freight pumps.
@smalltownmachineshop68602 жыл бұрын
Yes a lot of them are interchangeable
@alsbry8072 Жыл бұрын
عندي نفس الماطور ونكسر البرغي الي يشد المكره هل هو حديد ويتلحم مثل ماكان على المكره نفسها اتمنا الافاده
@pseudogiant6664 жыл бұрын
Good work
@smalltownmachineshop68604 жыл бұрын
Many thanks
@loganozarks41022 жыл бұрын
If you pulled the chord on one of these and it didn't fire and seemed to spin freely (impeller too)with seemingly no compression, what would be your first inclination?
@smalltownmachineshop68602 жыл бұрын
Stuck valve, the valve guides move sometimes if they get to hot or a severely blown head gasket, if it was something internal like a bad rod or broken connecting rod you would probably hear something
@loganozarks41022 жыл бұрын
@@smalltownmachineshop6860 thanks man
@dougvanallen22124 жыл бұрын
Hey Adam you should have ran that and pumped some water with it for some action shots
@smalltownmachineshop68604 жыл бұрын
I’d thought about that but the only water source I have on right now is just a hose so it would of blown all the water out then nothing. They ran it for 8 hours straight today with no issues so it’s good to go, thanks for watching
@brianstapleton7085 Жыл бұрын
How do you restrain the pulley on them
@smalltownmachineshop6860 Жыл бұрын
The pump impeller
@smalltownmachineshop6860 Жыл бұрын
You mean
@brianstapleton7085 Жыл бұрын
@@smalltownmachineshop6860 the string that goes into the pulley
@brianstapleton7085 Жыл бұрын
No I mean the pool rope
@cellulitehero Жыл бұрын
Thx
@cellulitehero Жыл бұрын
I’m getting kickback from the starting rope nearly pulled my wrist off ..I suppose it won’t do me any harm to inspect the impeller anyway thx again for tutorial