Tascam DP24/DP32 Digital Portastudio: Recording Vocals

[@PowercoatMusic]

Badly recorded vocal tracks ruin a mix. Period. Many of us learned that the hard way no matter what machine you’re using to record them with. Ignore the rules for recording good vocal tracks and suffer the consequences. Over time I found that ignorance is not the answer. With this, I wanted to share this information with anyone who struggles with recording vocals or who just wants to learn more about best practices in this realm.

[@patrickbuzzo1970]

I have a question for you: if i want to record my voice using even a good quality mike pre- amp, could happen that i will reach the distortion level much before than make a recording without the use of the pre-amp? My microphone is the Shure super 55, which i use for practising with the band, and has given to me satisfying results without pre- amp, connected directly to the recorder (NO through the mixer) . I like to have your opinion/ tips about this speech. Hope my english has been understandable, i apologize of there is any grammar or words mistake! Thank you so much, a big kiss to Shahsta ❤🐾🐾 Patrick from Italy 👋

[@PowercoatMusic]

@@patrickbuzzo1970 It depends on the microphone and recording console used as to whether or not you need a microphone pre-amp. Some microphones are more powerful than others and some recording mixers and or consoles have very good pre-amps built-in. If you’re getting a great mic signal without a pre-amp, then I suggest you don’t use one unless the pre-amp is giving you a sound you like that you cannot get without it. Also Shasta passed away last November, and we miss her terribly. Thanks for watching and sharing.

[@patrickbuzzo1970]

@@PowercoatMusic oh, No..... I feel so sorry for Shasta, believe me,although i've seen her one time in one of your videos, i was already felt in love with her. I do not have words to express my deep sadness....what can i tell you? Keep her in your heart, and, if you ever have the chance to do it,show some photographs of her best moments! A big hug to you with all my deepest feelings. Put a flower for me, wherever she is buried. Thank you so much. Patrick

[@PowercoatMusic]

@@patrickbuzzo1970 Thank you so much for your kind words about Shasta. Losing her felt like I lost of one my children. She lived to be 12 years old, and my family loved her as much or more than any dog could be loved. She was a rescue, which made her special and Shasta was such a beautiful, intelligent, and warm personality. Again, thank you for sharing your empathy and compassion. It is greatly appreciated.

[@localpreacher6154]

Great job on this video. I enjoyed it.

[@Rosie00100]

Your videos are narrated extremely well which make things so easy to understand. I have been watching and learning from them for a few weeks now and have taken my own notes. You will be my go to for information on home studio recording for now on. Tascam has a great asset in you as a partner. Keep these videos coming! All The Best, Powercoat Music, you're awesome!

[@PowercoatMusic]

Thanks so much for watching, sharing, and for your support. It is greatly appreciated. I’m glad I am able to help. 👍🏿

[@Tdog1961]

Amen!!

[@johnloughin]

How can you not love this guy. He can explain anything to anyone.

[@billhallsongs]

I agree John! He does a fantastic job!

[@juliusserrano5217]

Your channel is a blessing. I just bought the DP 24 SD, and your vids are very clear and helpful. THANK YOU! 😎

[@bobbythompson4268]

Just got the 32, why did you go with the 24 over the 32?

[@JulioSerrano2015]

@@bobbythompson4268 the DP24SD had a 40% discount! 😛 Also I use to play with 3 to 4 piece bands. 8 inputs are good enough for me, I think. Finally, I found that the DP32 has the same number of inputs. All in all, I think the two models are very similar 🤔but, obviously, 32 tracks gives you a lot more room for instruments and details. Cheers! 😎

[@baritony8763]

An invaluable video.I'm older and used to record on tape. I bought a DP24 and am getting ready to play all the positions I must to write,arrange,play/sing,engineer,mix and master music by myself. I especially like the suggestion to record vocals dry. Thanks!

[@kevinlander46]

So glad i found your video, many thanks for a great informative video, i had my vocals and recording up and running within 5 minutes after watching your brilliant lesson.

[@PowercoatMusic]

Thanks so much for watching and sharing. It's appreciated. 👍🏿

[@jeffreyjackson1773]

thank you for your videos!! Tascam's videos are just so over complicated and you make learning these wonderful machines so much easier

[@1mountaindreamer]

Thank you for all your help explaining how to record vocals on the Tascam 24, what a huge help this video is. I've recently just purchased this unit so I'm learning everything from the very beginning and video's such as this are a big help. Thank you again for taking the time to produce this video!

[@joshuatree3785]

I keep coming back to you.. thank you 🙏

[@PowercoatMusic]

Thanks so much for watching. 👍🏿

[@bmdakamarkl2938]

Yet another excellent, clear instructional video. Thank you, Sir, from across the Pond :)

[@PowercoatMusic]

You're most welcome. I'm glad it was helpful. Thanks for watching.

[@zacharysimpson6722]

This tutorial was very clear and informative for me.

[@PowercoatMusic]

Thanks for watching and sharing. 👍🏿

[@Jesus4UWH]

Thank you so much for this great video. Your tips and ideas will really help me. I wish you could have an in person recording seminar for those of us who are trying to master this tascam unit. As an elementary music teacher I just wanted to say to you that you're an excellent teacher! You explain things in an easy to understand way and you have a wonderful speaking voice! Thank you-Bill

[@PowercoatMusic]

Wow, that’s a huge compliment and very nice of you to say. Thank you very much for watching and sharing. It is appreciated. I’m truly glad I can be helpful.

[@Jesus4UWH]

My pleasure!

[@JohnMichaelDay]

I've been using my Tascam DP32 for several years and love the review of the fundamental. Thank-you

[@PowercoatMusic]

You're most welcome. Thanks for watching.

[@neutralearth1061]

Thanks for the informative video! The DP (We use 2 DP-32's) is an amazing sounding recorder for vocals (and everything else). We do all home recordings in an untreated studio and still get high quality results for just a couple guys doing this for fun. We used a vintage 1980s SM58 to record all our vocals on our 1st album (Neutral Earth) and they sound pretty good! For our 2nd album (Current, Volts & Ohms) we stepped up our microphone game and used Neumann TLM 102, AKG C3000B, Shure SM7B and the trusty SM58 microphones and I think it was an improvement. Now working on our 3rd album we've added a dbx 286s pre-amp processor and it is mind blowingly amazing! It makes your microphone come alive with added clarity and dimension. We also added a Rode NT1, Sennheiser e935 and Audio-Technica AT2020 microphones. The dbx 286s' compression makes recording consistant vocal levels a breeze, and that makes your mixing so much easier. Mixing the 1st album was truly an adventure do to my (Craig) inconsistant recording levels. We're still learning, improving and having fun! Love your videos! Thanks!

[@paulpotter9867]

Could you get any effects on your vocals while recording??? If so, how? Thanks

[@neutralearth1061]

@@paulpotter9867 On our 1st album, if I wanted effects on the vocals I would plug my SM58 into a vocal effects pedal. I used the TC Helicon Mic Mechanic, TC Helicon Duplicator, TC-Helicon VoiceTone Harmony-G XT, TC-Helicon VoiceTone H1, and possibly the TC Electronic Hall Of Fame Reverb. On the 2nd album most of the vocals have no effects or I used the DP-32 onboard reverb or Delay. kzbin.info/www/bejne/d2OXaoWZeLOlfMk kzbin.info/www/bejne/jXrQq3Smrd9snc0

[@MrVaibot]

Going to buy one and your videos are giving me a great head start.

[@PowercoatMusic]

Thanks for watching.

[@chrispereji785]

Excellent! I really learned a few important things about preparation before vocal recording...

[@PowercoatMusic]

I am so glad I could help. Thanks for watching!

[@peterwilliams568]

Another good video. Your comment about recording everything 'Dry' is very important. That's what I do with all my guitar tracks so I can hear everything clearly.

[@ricmightybonefeliciano9800]

Wow. You are the first dude that actually knows what they're talking about with regards to DP24 and general recording practices. Had to shuffle through any clowns on KZbin before finding you.. Thank you

[@garethlewis2504]

Best presentation of the Tascam DP

[@PowercoatMusic]

Thanks for watching. 👍🏿

[@johnstone2230]

Awesome Job. Clearly worded and to the point. Thanks for tips.

[@PowercoatMusic]

You're most welcome. Thanks for watching and wishing you the very best. 👍

[@daniels.7392]

God bless you and your family and big thanks for the teaching, bye and happy slide in new years 🍇

[@PowercoatMusic]

You’re most welcome. Thanks for watching and wishing you and your family the very Best New Year. 👍🏿

[@mpix00]

Awesome! I just got a killer deal on a DP32°~••☆ looking to record my live play synth and vocals.

[@PowercoatMusic]

Congratulations! Wishing you the best with all of your projects. Thanks so much for watching.

[@LuisMorales-xm6wc]

You are an excellent guide Man to learn about this Tascam machines.I really appreciate it!!

[@PowercoatMusic]

Thanks for watching. It's appreciated.

[@shanefitzpatrick5811]

Excellent explanations from the expert above. Helps me understand a lot of things l didn't know before. All of his tutorials l found very helpful. Thanks.

[@PowercoatMusic]

Thanks for watching. 👍🏿

[@rockinvida1960]

Very helpful video...I am thinking about pulling the trigger on a DP-24 and this was super good to help me understand the unit...

[@PowercoatMusic]

If you have not already, you may want to check out the DP Playlist on this channel. Lots of good information there. Thanks for watching. 👍🏿

[@DL-zq1rz]

Great video with great guidance I couldn't have asked for a better video for training

[@PowercoatMusic]

Thanks for watching. It's appreciated. 👍🏿

[@johnriley8314]

I am a new subscriber...I have also been using a Tascam 208i audio/interface for my Home Recording needs (DAW is Cakewalk-free and all I need lol) A musician friend of mine recently purchased one of the 24DP's, and it's a new ballgame for me so to speak. We are going to record some new Original songs , so I am studying up on this piece of equiptment. Seems great for a singer/songwriter to record w/...and one DOES NOT need a computer. Your videos are definetly helping me learn about this gear and all it's functions/capabilities...thanks for them, and wish me(us lol) luck in our NEW adventures. He has never even used it, so I'm being tasked w/ teaching and recording as we go LMAO...(fuh huh????) Stay Safe and keep on making informative vids man.

[@PowercoatMusic]

Thanks for watching and sharing your experiences. It is truly appreciated. When you get the chance, check out the DP Playlist on this channel if you have not already. Lots of good information there including how to record vocals with the unit. Best of luck with your original music. The fun is only beginning. 👍🏿

[@Jesus4UWH]

Thank you for the video. I learned some very important things!

[@PowercoatMusic]

You're most welcome. Thanks for watching.

[@michaelchance6507]

very well done and informative, thanks.

[@PowercoatMusic]

You're most welcome. Thanks for watching. 👍🏿

[@fanfanackapan]

Great videos! I have just bought a Tascam DP32 SD and these videos are a great help. It can be quite daunting with so much information to take in. Thank you :)

[@PowercoatMusic]

You're most welcome. Thanks for watching. 👍🏿

[@CFMRocksFishing-Music]

Five thumps up !!!! KAY ...

[@johnnydiamondsmusic1673]

I also use compression on the mic input which I find stopped any overloading when going from quiet to louder singing.

[@PowercoatMusic]

A great tip for some vocal scenarios. Thanks for watching a sharing. 👍🏿

[@MrGuido63]

I have just purchased a Tascam DP24 and finding my way through to make home recordings. I am grateful for your excellent videos explaining how to get there. By the way, does the SD24 have an internal hard drive or does all the recordings are stored in the SD card? Thank you for your time an effort in producing/uploading these videos that are a tremendous help for people like me!

[@PowercoatMusic]

All of the recordings are stored on the SD card. Thanks so much for watching, and for your support. It's appreciated. 👍🏿

[@billhallsongs]

Thank you very much for these excellent reviews. Regarding the use of effects on the vocals during mixdown (versus during tracking as you suggest) creats an issue with these machines regarding the built in dynamic effects (ex. compression) since they cannot be added during mixdown on the Dp-24 and 32. I was wondering if you could perhaps address in a video, how to best use one of the Tascam's dynamic effects such as compression during tracking of the vocal (ex. settings, levels). On theae machines the dymmic effects are digital, which of course is not the same as using an analog comperssor to control levels during tacking (which is so helpful on fitting a vocal track in the mix strongly). It would be helpful to know how best to set levels going in from an outboard mic pre and/or outboard mic pre/compessor combo into the Tascam machines. I would assume you would use as little as the built in preamps as possble (This would be very helpful to a lot of us). It would also be helpful to know your overall opinion of he Tascam pre-amps as for many folks, not having to buy and use outboard equipment is one of the key reasons we buy these machines (cost and ease of use) Thanks again!

[@PowercoatMusic]

Adding effects to vocal recordings during mix down should not be an issue with DP units, unless you don’t have an external effects processor, which limits you to onboard effects. If that’s the case, then printing an effect during recording is what people do. When it’s not, the unit has 2 effects sends to accommodate adding whatever external effects processor(s) that you want and or need during mix down. For more information on this, watch my video, “Tascam DP24/DP32 Digital Portastudio: Using External Effects” on this channel. In addition, I also addressed your other question in a previous video regarding using internal effects with the DP-24. Check out the video, “Tascam DP24/DP32 Digital Portastudio: Using Built In Effects & EQ” on this channel. The DP has a library of pre-programmed effects created by professional studio engineers for you to choose from. My suggestion is to experiment with these to see which, is right for your specific vocal mix. The preamps on the DPs from my perspective are fine. They are not the best, but the quality is more than enough to get professional results if utilized correctly. To be specific, I primarily use external preamps when recording microphones and acoustic guitars. Sometimes on keyboard patches if I’m going for a warmer sound. If you have not already, please check out the DP Playlist on this channel. Lots of good information there. Thanks for watching and sharing and I hope this information serves useful. 👍🏿

[@billhallsongs]

Thanks so much!!

[@marcodaoho4441]

Also bare in mind that when spending don't expect any return in profits for original music ,generally you will be the only person interested in your own music

[@PBrown-cg3lg]

Great video... You really did a great job, I really learned something today. Lol! I will be back. Thanks...

[@PowercoatMusic]

Thanks for watching and sharing. 👍🏿

[@aaronrivers64]

Awesome and very simple videos. Thanks

[@PowercoatMusic]

You're most welcome. Thanks for watching.

[@jewsjw50]

This will be my first digital recorder been using the old 8 track cassette but it has died just exactly easy is this to use.

[@antondial5326]

Hi, thanks for your great instructions on the Tascam machines. I have read that you have to bypass the DP24 preamp if you're using an external preamp. What advice can you give on this ?

[@danblackberry6930]

Big Thanks 🍇

[@matthewotremba9230]

Love your videos How bout I just come to you and record I am certain it would be an awesome experience

[@PowercoatMusic]

Thanks so much for watching and for your support. It's appreciated. 👍🏿

[@DEVAULT.]

Great tips Sir.

[@PowercoatMusic]

Thanks for watching. 👍🏿

[@fredheinz1134]

Thanks for the info. Question: how are the built-in mic preamps on the DP-24SD, are they good enough to plug most mics into them, or would using an external mic preamp (such as the ART that was briefly shown in your video) offer a noticeable improvement in sound quality? Also, if an external mic preamp is used, or another external mixing board is connected to the DP-24SD, are the built in mic preamps bypassed?

[@kloebykloebator6483]

Very good video :)

[@PowercoatMusic]

Thanks so much for watching. 👍🏿

[@robertgould1718]

Very well done

[@PowercoatMusic]

Thanks so much for watching. 👍🏿

[@tjazztony14]

Thank you man that was a very good prank down very professional

[@rayparkin2074]

Further to my previous message on a more positive note could you look at the green and grey dials regarding Effects Send, Master Send etc on the DP24SD...we are at wits end as to their applications..

[@PowercoatMusic]

To answer your question, please watch my video “Tascam DP24/DP32 Digital Portastudio: Using Built In Effects & EQ” on this channel. It covers the DP effects and parameters in detail. For even more information on the DP, check out the DP-24 Playlist on this channel. Lots of good information there.

[@Heir0]

Very helpful.

[@dylanvinita1401]

Thank you so much for your help on all of your videos regarding the Tascam dp-24sd. I was taking notes on what to and what not to use the phantom power for. I have a better studio recording microphones that I am saving money for but for now I am recording vocals with a supercardioid dynamic microphone, the CAD D90. I took note "do not supply a dynamic mic with phantom power" would you still advise not using it with this mic? THANKS AGAIN for all your uploads! They are a huge help.

[@PowercoatMusic]

If you apply phantom power to a dynamic mic, and the amount of phantom power going to each pin is uneven, the dynamic mic will be destroyed. Good cables are critical, but if you choose to do that you roll the dice and take your chances. Thanks so much for watching and sharing. It's much appreciated. 👍🏿

[@dylanvinita1401]

@@PowercoatMusic Thanks so much. I just exactly one day ago upgraded to a thicker more durable looking mic cable for recording! I think I only Applied phantom only once on one take of a song. I hope my mic is still okay after that one take in the studio. I did use it during a live performance today and it seemed fine . I will not do it again. If I use the mic again ill just use it without phantom, its sounded good during vocal recording without phantom anyways.

[@braxtonprowell6121]

Thank you for the video. I am a novice, so the tutorial was needed. QUESTION: You stated Microphones carry weak signals. Thus, is a preamp necessary? I have an AKG P420 with no pre-amp and a Rode NT-1-A, which is connected to a Zoom V3 vocal processor. I have the vocal processor outputs connected to mic input A-H. While singing into Rode with Zoom V3 I can hear myself loud and clear via the headphones and when phones are disconnected, I can hear myself loud and clear through the monitors. While singing via AKG, I must turn my monitor level pass 50% to hear sound through headphones or monitor. Do I need a preamp for the main mic? Lastly, I watched another video of yours where you talked about external effecters which are connected to effects sends on backs of Tascam dp-24-sd. Should my vocal processor be connected here instead of to the microphone input jacks?

[@PowercoatMusic]

The answers to both of your questions are "Yes". Thanks for watching.

[@teepee6727]

Great explanation more hands on the controls I.e using effects

[@PowercoatMusic]

For more hands on details about using effects, watch my presentation "Tascam DP24/DP32 Digital Portastudio: Using Built In Effects & EQ", on this channel. Also check out the DP-24 playlist. Lots of other good information there. Thanks for watching. 👍🏿

[@hangkap4693]

Thanks alot..

[@PowercoatMusic]

You're most welcome. 👍🏿

[@matthewotremba9230]

SUBSCRIBED !

[@ryancohenmusic]

I was told using an external preamp is useless with the dp24 as you can't override the Tascam Preamp. So If I am using my external preamp - a universal audio la610 going into the Tascam - will the Tascam just ignore the La610 and use the Tascam preamp instead or will i get the full capability of the la610 preamp going into the Tascam! You're the man.

[@PowercoatMusic]

The point of using an external preamp is not to try to override the Tascam preamp. It's to enhance and or change the sonic quality of the audio source prior to recording. It's suggested in order to nail or get as close as possible to a sound you need and or want up front, as opposed to trying to "Fix it in the Mix". DP-24 preamps are not bad. So if they are presented with a source that's been prepped, then they do even better. This is why using an external preamp with the Tascam DP-24 is not at all "Useless". Thanks for watching and sharing. 👍🏿

[@ryancohenmusic]

Powercoat Music you are the best. I can always count on you. A few people made me feel like using the external preamp wouldn't work with the Tascam. I'm glad a professional like you disagrees with that as well. I'm a huge Tascam fan and prefer it over DAW sometimes. It be a shame to find out you couldn't make it even better with external preamps so this is great news.

[@mikelebridgeforth189]

Great advice thank, and I will subscribe.

[@PowercoatMusic]

Thanks for watching and for your support. 👍🏿

[@Kenwhoo]

Thanks for ya video but to me walk in closest stuffed full of chores and packing blankets is key. Just make sure to snap ya fingers a few times to were you hear zero reverb or any other than ya finger snap. Sound should be solid as hell.... Yeap packing blankets and cotton cushions that will absorb sound....

[@crlguitar1]

Well, since you asked...I must say that waving your hands emphatically throughout started to feel a little bit weird after awhile. The information was all good though...Thanks...

[@PowercoatMusic]

Nobody's perfect. Thanks for watching. It's appreciated. 👍🏿

[@derekjohnsonyoutubechannel7322]

Hello Professor. Thank you for your knowledge sharing. Your instructions are spot on .I listened and did what you said and my results were quite excellent, It WORKS. Thank you very much. Whats the difference between DP-32 and DP-24 ? I've a DP-32. does whats good for DP-24 also work for DP-32?

[@PowercoatMusic]

The basic difference between the DP-24 and the DP-32 are the number of tracks. Otherwise, they operate generally the same way. And yes, what’s good for the DP-24 also works for the DP-32 as well. Thanks for watching and sharing. 👍🏿

[@jamesanderson5393]

Can you a record a guitar with a phantom powered mic simultaneously?

[@dinodasbunce6224]

Thank you for the tutorial, I definitely learned some important stuff. A subject that I need more clarification on is mic preamps. My experience with my Tascam 244 is that it had very good preamps. Are the DP24 preamps no good, is that why you suggest buying a good preamp to use with the DP24? If the DP24 preamps are not all that good, could I use the 244 preamps and run the 244 to the DP24? I am excited about my new DP24 and want to get the best out of it. Again thank you for letting us benefit from you experience.

[@PowercoatMusic]

You're most welcome. The DP pre-amps are fine for many applications, but having a good external pre-amp can really help boost your signal and add warmth to your sound if that's what you need. If you're happy with what the stock offers, then you're good to go. They're not bad. If you haven't already, check out the DP Playlist on this channel. Lots of good information there. Thanks so much for watching. 👍🏿

[@TheEndOfThings]

I’m working my way through the series for the Tascam - these are great videos and very informative. Thank you. For the ART Studio V3 preamp that you show, if I was using a condenser mic through that preamp and into the Tascam desk, would the Tascam need to be set to phantom power ON, or does the studio V3 provide phant pow. so I could leave it OFF?

[@PowercoatMusic]

The ART provides Phantom Power, so you could use that if you chose to. Thanks for watching and sharing.

[@TheRealKurse]

How do you toggle the monitors ON/OFF so that the playback is only coming through the headphones instead of both headphone and speaker? On my old Tascam 2488 there used to be a "mute monitor" button right next to the monitor level control knob but this work station doesn't seem to have one. I'd really hate to think that I would have to manually turn my monitors on/off between takes just so we can record. Can anyone help answer this for me?

[@paulpotter9867]

Can you use the effects or dynamics WHILE recording vocals? I did not hear any difference at all in vocals even though I tried ... vocal was dry and flat, and I like reverb on my voice while recording...

[@rauldelarosa5680]

Good day Sir. Is this mixer work as interface also direct to the recording application in my computer? The same as xr18 and zoom L20 does. Thanks in advance for your answer.

[@EddieHitler7]

great video!

[@PowercoatMusic]

Thanks for watching. 👍🏿

[@havenautart]

Is midi a reason to get model12 over this model. (Sd) I’m trying to do a full mixtape in box I will be using an MPC one which does audio over usb.

[@PowercoatMusic]

I should say not. To get the details on both models, check out my video "Tascam DP-32SD Digital Portastudio vs Tascam MODEL 12" on this channel. Thanks for watching. 👍🏿

[@devincarrasco2443]

once i record my song on tascam how can i add vocal effects and how do i mix and master? thanks for the help!

[@PowercoatMusic]

Check out my DP-24 effects and mastering videos on this channel. They should help. Thanks for watching!

[@josephchristopherlewis6020]

👍💯

[@marcosmunoz3385]

Whats the best way to record vocals live and still be able to hear them through a PA?

[@johnburton7733]

Will this be good for starting my radio station, being as though I will need extra tracks.

[@PowercoatMusic]

You should be good to go. 👍🏿

[@jobaecker9752]

Great video! Just wondering if any of you have experienced an overly hot input to the DP24SD (I'm referring specifically to the Audio-Technica AT2030 microphone)? Even with the mic's -10db pad turned on, and the rolloff on, PLUS zero gain AND the input fader all the way down, my AT2030 is clipping when I try recording a kick drum. Even outside of the head, this is happening. (When used for vocals, at about 8 inches away, the mic sounds great.) Not sure what is happening with either the mic or the Tascam unit. I may just have to try an in-line attenuator. Got any other ideas?

[@PowercoatMusic]

If the mic is that hot, one suggestion is to set the mic even further away from the source in the room (3 feet or more). Another is to use an external pre-amp to control the mic as that should help significantly. Check out my video "ART Studio V3 Voiced Valve Preamplifier: Why and How I Use It", on this channel. We know that recording requires a lot of experimentation, so give these suggestions a try and let me know what happens? Thanks for watching an sharing. 👍🏿

[@WilliamJohnson-oh4em]

Good good video but, although you may not want to use effects permanently in the recording of your vocals at the moment of singing them. You may want to use a little bit of effect as you're singing them to help with inspiration. How can you do that? I'm talking like maybe throwing a little reverb on there, or even a little compression and a little reverb. How can one do that?

[@PowercoatMusic]

Creating a separate vocal headphone mix is common and simple to do. Connect an external effects processor to the DP-24 Effect Send output 2 on the back of the unit. Don’t run the external effects processor returns back to the DP-24’s inputs. Use those returns for your vocal headphone mix. Push the MIXER button to control the effects 2 settings. Now you can isolate and use whatever effects you desire for the vocal session and not print the effects during recording. Thanks for watching and sharing. 👍🏿

[@ryancohenmusic]

Powercoat Music couldn't you also do this by simply taking the reverb off during mixdown but keep it on during recording to just get reverb while you do the take. Thank you!

[@lb135]

Thank you for your video. Can I leave the phantompower on if I connect my keyboard in the line inputs?

[@PowercoatMusic]

That is not recommended. Turn the Phantom Power off in that case. Thanks for watching.

[@adamw5143]

Question... so the Tascam channel preamps don’t work as great as an external preamp for a condenser?

[@PowercoatMusic]

This is not a Tascam preamp issue. Microphones output what is known generally as “mic level” signal. Mic level is typically specified between a nominal −60 dBu and −40 dBu. However, professional audio equipment works with audio signals that are at line level, which is nominally +4 dBu. Notable “Professional equipment” includes mixing consoles and digital audio workstations. External preamps are often used to compensate for this, which is normal.

[@phildavison319]

Am I right in thinking phantom power only works if I use an XLR to XLR cable? I am new to this and think I got a cable that is only worth using with my dynamic mic. Ho, hum!

[@PowercoatMusic]

Phantom power voltage travels through balanced audio cables, so you would be correct. Thanks for watching. 👍🏿

[@ObzzorRock]

Thank you for a great video. About phantom power, what should I do when I use ONE mic that requires phantom but the rest NOT? Since the button switches it for 4 inputs, can I combine phantom and non-phantom mics?

[@PowercoatMusic]

If your mic cables are all wired properly (balanced, with the correct pin connections) and well made, and you’re using quality XLRs everywhere, and all your microphones are modern, there should not be a problem. In some professional studios, phantom power is provided on all box connections, and is always on. Professionals use dynamic, condenser and even ribbon mics constantly in those environments. However if you are worried about it, I suggest using an external mic pre-amp with Phantom power for your input, and leave the Phantom power off on the DP for the rest of your mics. I hope this information helps. Thanks for watching and sharing.

[@ObzzorRock]

@@PowercoatMusic thanks for great content and quick answer. Actually, I am now planning to get the DP-24 and your videos are among the most helpful ones. I get it with the mics, I thing there will be no problem. What about other instruments? Lets say I use 2 inputs for mics and the rest of the 4 powered inputs for bass (Sansamp) and guitar (Kemper). Will they also be safe?

[@donaldsnaith6226]

I have trouble getting a decent bass and midrange sounf from the eqs, any suggestions ??

[@PowercoatMusic]

You may want to consider adding and external hardware EQ to either effect 1 or 2 to help. Thanks for watching. 👍🏿

[@johnburton7733]

I remember these isn't this analog though or is it considered digital?

[@PowercoatMusic]

It's a digital mixer. Thanks for watching. 👍🏿

[@Esenabros]

Thanks for the video. But i thought you would record something for us to hear.

[@PowercoatMusic]

I did that. The vocals from my last release were recorded with the DP-24. Here's a link if you'd like to hear it: kzbin.info/www/bejne/jGjGlYKwiauaoNk Thanks for watching and sharing. 👍🏿

[@RayoBeatz]

i know i will get a lot of hate but does this come with pitch correction at all?

[@PowercoatMusic]

No it's doesn't. Thanks for watching.

[@johnsnebula751]

Hi, can you connect Tascam DP24 to a larger screen or monitor.

[@PowercoatMusic]

No, that is not possible. The NEO would allow you to that with a VGA adapter card and I did that, but the DPs don't.

[@johnsnebula751]

@@PowercoatMusic Thanks for your answer to my question.

[@Jesus4UWH]

Hello, In your opinion and experience, is a Sonnheiser e835 a good mic for recording vocals? Thank you-Bill H.

[@PowercoatMusic]

From my perspective the answer is “Yes”. It hard to go wrong with Sennheiser in general, as this company is well-known for making very good and high-quality mics and headphones. Wishing you the best with your purchases. 👍🏿

[@Jesus4UWH]

Thank you very much-I appreciate it! Thanks for getting back to me too. Many people on KZbin don’t...

[@julian8356]

i wanna learn how to record without or with as little use of a daw its so confusing is this a way to?

[@PowercoatMusic]

Yes. This is a simple, popular, and long standing alternative for people who do not want to use a DAW. Thanks for watching.

[@jerrythoma2711]

with out a seperate booth for vocals, how do you turn off monitor speakers so headphones only have sound while recording vocals?

[@PowercoatMusic]

The DPs have both Stereo and Monitor Outs (back of unit) and a Headphones Out (front of unit). They have separate fader and knob controls. Just use the headphone outs when you need them and lower the others. Thanks for watching and sharing.

[@paulpotter9867]

How do you record on tracks 9-24?

[@PowercoatMusic]

There are select buttons for those tracks that are clearly marked. You assign your inputs, arm the tracks and record. Thanks for watching. 👍🏿

[@paulpotter9867]

Thanks!!!! I can't get any reverb from effects on my vocals while recording?!!! It's dry...any ideas why not??

[@valwolve]

I want to join your group

[@LuisMorales-xm6wc]

Is tascam dp 24 a professional level recorder? THANKS.

[@PowercoatMusic]

Yes it is. Thanks for watching. 👍🏿

[@LuisMorales-xm6wc]

@@PowercoatMusic Thank you.i love your videos!!!

[@diosancho3875]

Great tips! Do you feel that a completely blind person would be able to use the DP24SD

[@PowercoatMusic]

I strongly suggest that you contact Tascam for the answer to that question. They may have some solutions in that regard. However, thanks for watching. 👍🏿