Tasmota and Tasmotizer - Easy Flashing Guide for ESP8266 devices

[@yaczesuaff]

Hello! I'd like to thank you for making the video! I'm the author of this app and I'd just like to point out that you manually did all the things that are doable via "Send config" function. After the device power cycles, you wait a few seconds, open the dialog, enable the checkboxes to the left of the config group boxes and send all the basic config details to the device via serial.

[@KPeyanski]

Thanks. Great work. It’s the easiest way to flash a device by far. I’m honored that you like my video. BTW did you plan to explore the OTA options?

[@firmbutton6485]

OTA possible now?

[@jtreg]

Subscribed. This has answered so many questions I had and I managed to get my ESP8266 working perfectly. Clear and good instructions with no 'theatrics'; please tell me why there are so many weirdos and jokers discussing IOT on YT? It seems that the subject is only covered by people I can't bear to watch, truly. Anyway, thanks; I have naturally added your video to my notes in Obsidian, look forward to seeing more - thanks man.

[@KPeyanski]

I’m glad that this video was helpful for you and thanks for the sub. I’m releasing new ones every week so you can have a lot of content to watch ;)

[@berndzethner7422]

One of the best tutorials I´ve ever seen! Thanks for sharing

[@KPeyanski]

Thank you. Your comment make my day, really. Check my other tutorials as well and let me know what you think!

[@riteshmakan7716]

Thank you. I love your tutorials, It also helps that you have the narrations and links in your descriptions. Hopefully others do the same

[@KPeyanski]

You are welcome. I'm glad you like them!

[@ssinseeme]

very important for newbies. before you plug your USB to the adapter, push the button on your Sonoff and release after you plug your USB

[@KPeyanski]

Thanks for that comment, you are completely right. The device should be set in programming mode in order flashing to be successful.

[@billysanches2202]

Congratulations, you keep it simple, and updated. All that I need

[@KPeyanski]

Glad you like it. Check my other video tutorials as well

[@barrydonaldson]

Excellent video - Crystal clear! Thanks, man!

[@KPeyanski]

Very welcome!

[@knax97]

Thank you verry much vor this nice Video...It still works in August 2020...

[@KPeyanski]

Thanks for sharing that. There should be no reason not to work 😉

[@galoblanco691]

Excelent!, impossible to be clearer, Thanks for share

[@KPeyanski]

Glad you enjoyed it 😁

[@xbitterpillxX]

Good explanation and easy to understand. I would like to see a video where you explain Tasmota + MQTT + HA

[@KPeyanski]

Thank you for your comment. I'll consider very carefully your idea :) What exactly do you think will be most interesting to discuss in such a video? Controlling a Switch/Lights or something other?

[@xbitterpillxX]

@@KPeyanski switch /lights would be a good starting point, I know there are multiple tutorials already, but the way you explain makes it easier to understand, at least for me. Keep up the good work.

[@KPeyanski]

Thanks for your good words about me. This is really motivating. I may even use your comment in the video if I make it eventually. Of course if you don’t mind ;)

[@shaunwhiteley3544]

KPeyanski Some info of ‘setoption19 1’ for example so auto discovery works and any other setoptions that are good. Cheers

[@nevancasey5552]

Thanks for making this tutorial. It was really informative.

[@KPeyanski]

Glad it was helpful, Nevan!

[@alynmaynard7156]

Hey there! I would love to see a tutorial on how to have TLS to your ESP as well making the ESP more secure against hackers. Thank!

[@KPeyanski]

Thanks for the idea!

[@smartatwork2344]

Hey Kiril, great Job. Very good explained. Also thx for the extensive description. Wish you a happy new year. Looking forward to your next Video. Had you ever played with Blynk-Sever?

[@KPeyanski]

Hi and thank you. Wish you a happy new year too. Glad to have you here. About the Blynk it is kind of my TODO list, I have only read some headlines about it and never use it till now. Is it kind of cloud based service or there is local version as well?

[@smartatwork2344]

@@KPeyanski I read only the overview of Blynk-Server. It is installable locally - also seen as Docker-Container at IOT-stack. Looks interesting to me. Will have a deeper look on this, because seems having a nice mobile-app with nice frontend dashboard.

[@KPeyanski]

Thanks for this information. It sounds very interesting. And if the docker and IOTstack are involved it will be very easy to try it. I will definitely play with it later. I will keep you informed ;)

[@mandeepmails]

Nice and informative video. Question - i connected wemos with relay and AC power accessories. i'm able to control but because of no power-backup or whatever reason if there's couple power fluctuations, it wipes out the config from the esp8266. Any ideas, how to avoid it ?

[@KPeyanski]

No, sorry! But it seems like a nasty issue.

[@Kirkbdavis]

Good info well presented thanks

[@KPeyanski]

Thanks Kirk. Check my other videos as well.

[@fredvign431]

Hello... What will be required to use a dimmer on the configuration side? TIA

[@KPeyanski]

You just have to use the Light card in Lovelace with your Tasmota device as entity. Dimmer is embedded in the light card and it works flawlessly.

[@fredvign431]

KPeyanski thank you so much!

[@KPeyanski]

For nothing, did you manage to get it work?

[@fredvign431]

KPeyanski will try it in these coming days but you gave me great advice already 👨🏻‍🏫🍎A+😊

[@jeevakkuwar]

I have flashed an esp8266-01 module with tasmota. My question is that How and Where can I integrate a reset button to the circuit to reset the firmware to factory defaults?

[@KPeyanski]

I don't know that sorry

[@nawafbana8100]

Hello brother, thank you for your videos, I flashed my Sonoff mini to Tasmota, how can I get back to original firmware because no need now to flash Tasmota and I can use it in Home Assistant with original firmware?

[@KPeyanski]

Sorry, don't know that. Probably it's possible but I never did that till now. I just stick to Tasmota :)

[@liveartrainbow]

Hey: first i would like to tahnk you for sharing. I am just wondering about installing tasmotizer on linux. I tried to install it on ubuntu 18.04 and I am not able to . If you did try it already , your help to resolve such issue will be much appreciated. Thank you in advance.

[@KPeyanski]

Thanks for your comment. What’s the error you are getting? You have to have pip3 installed on your system, then you just simply execute: pip3 install tasmotizer

[@josecorreia2584]

Hi, but it's not better make the backup of the original esp8622 firmware? Do you know how we can achieve that? tks&rgds

[@KPeyanski]

I didn't try that till now and I cannot point you to the right direction. I guess, you have to search a bit in google

[@danielpancho1]

Hello, thank you for your video. I have a problem, I can perfectly tasmotize my esp8266 module, but after a few seconds it just resets. It gives me this error: ets Jan 8 2013,rst cause:1, boot mode:(1,7) ets Jan 8 2013,rst cause:4, boot mode:(1,7) wdt reset I am trying to tasmotize my module to configure it in home assistant, but I can not do it because of this error. Maybe you can help me, thank you very much.

[@KPeyanski]

Hey Daniel, try to open an issue in the Tasmotizer GitHub page

[@IoIon2010]

Hallo boss! How can avoid a relay turn off/on after every restart? I have 2 relays set in interlock , but every time the wemos tasmota restarts they will go on together for few than a second.... can you help me?

[@KPeyanski]

Sorry, don't know that. I think mine Tasmota devices are also blink when they are restarted

[@rkbest9783]

I am trying my first time- tasmotizer and I use windows. The moment I connect and refresh ports, nothing new is detected and on pressing tasmotizer the tasmotizer.exe closes without any message. Did I miss any step.? I trying to flash D1 mini as your link below. I tried it on two Windows 10 laptops with a similar crash of the application.

[@KPeyanski]

I’m afraid I cannot help here. I can suggest to go to the Tasmotizer GitHub page and open an issue there. Good luck and let me know what happened?

[@Fun-io9kv]

Thanks

[@KPeyanski]

No problem

[@Fun-io9kv]

@@KPeyanski Is Tasmota better than ESPHome?

[@shaunwhiteley3544]

8.10 I believe the ‘random number’ for the device are the last 4 numbers of its MAC address. Edit 😂 at 9.50 that proved me wrong ☹️

[@KPeyanski]

Thanks, probably it is not so random number. It must have some connection with the hardware, but at the end of the day the important part is that to work stable. Did you manage to try this out?

[@jemanuelmhz7972]

Para restaurar?

[@KPeyanski]

What does this mean?

[@jemanuelmhz7972]

@@KPeyanski se puede borrar trasmota?