How to Replace A Wheel Seal on Semi/ Wheel Seal Leak/ Wheel Seal Installation/100kMiles Inspections

[@fernandomoreno8383]

I've been a company driver for 18 years. Now I've become an O/O, and your videos really have shown me so much on how to work and fix my own truck. Thank you very much!

[@zkgarage1939]

Thank ya sir, this means the world watching this. I'm in diesel tech school at the moment trying to learn as much as possible.

[@bloqyutepa6432]

I've learned so much from you , your vids give me the confidence and assurance at work. Love the energy you bring , its like im right there with you. KEEP IT UP !!

[@evanllanes1392]

Thanks for the video I'm an entry level diesel mechanic from Houston and this video helps me learn that much more!

[@freddarby7808]

Not sure of your reasoning for these videos; be it educational, monetary or just for likes, but please accept my sincere gratitude bro! Hopefully all of the pre-mentioned things are there but let me add that you are literally helping me feed and house my children and grandchildren as well! Being a mechanic kinda fell into my lap, long story short. I was in another field and life happened, as it does sometimes. I say that to say, I had next to ZERO experience doing this. Your videos gives me the tools sorely needed and I appreciate you dude! Thank you!!! P.S. Your camera person needs a raise!!! LOL

[@Frankie4231]

You truly have a gift for breaking things down to where anyone can understand thanks a lot this has been a big help to me in learning in my new role at work

[@TATEXPRESSINC]

Glad the video has helped.

[@XFonzieXx]

I did my first Seal today and it was a Success, you made it look so easy 😭 Great video brother!

[@behroozkhaleghirad]

I'm both diesel and gaz engine mechanic from Iran. I love my job and I plan to migrate to Canada to become a truck driver. In my opinion anyone who wants to drive heavy vehicles in harsh conditions like ice roads, logging, etc. should be at least a medicore mechanic first, then attempt driving. You can't beg bears and wolves to help you when you break down in the middle of nowhere. BTW great videos. Carry on and let us enjoy 👍💪

[@TATEXPRESSINC]

Thanks for watching.

[@psuperpsychophreak]

@@TATEXPRESSINC Great work. I would love to know where you guys are located so I can get some work done on my Volvo.

[@psuperpsychophreak]

@@TATEXPRESSINC also: I just got my seal replaced precisely in that rear corner, yet after less than 1,000 miles that seal is leaking again. What are the possible failure points that would cause that; I mean parts and what was done incorrectly during reinstalling the assembly that would cause it to leak again? Thanks in advance.

[@carlospastran3527]

@@psuperpsychophreak if it's leaking after 1000 miles, the seal was not installed correctly. Probably damaged in the process by using wrong installation tool, cleaning hub or not torquing the spindle nut properly.

[@tanselziyad1414]

I salute to your skills and sharing this professionalism. Thanks for filming....

[@scarletttays6607]

Your video's have been such a great educational resource. I'm currently in college working at getting my level 1 as a Truck and transport Tech and I really enjoy your in-depth explanations and details. Thank you for being such a a great instructor. Cheers!!

[@lukaszhusi-k3k]

Your a cool dude for teaching people to save money by doing it our selfs

[@gregoriomartinez6670]

WOW MAN YOU MAKE JOB LOOKS EASY,.AND YOU DID GOOD AND EXCELLENT JOB STEP BY STEP THANKS BRO AND GOD BLESS YOU.

[@TATEXPRESSINC]

Thanks for your feedback. Be sure to subscribe for more content.

[@gregoriomartinez6670]

I'M WISH TO LEARN MORE ABOUT MECHANICAL JOBS ON SEMI TRUCKS LIKE HOW TO REPLACE BRAKES,. CHAMBERS,.AIR BAGS,SEALS,.THE JOB WHAT I DO IS ROAD SERVICE TIRE SERVICE ONLY,. I'M WANT TO LEARN ALL THIS BRO .

[@LucretiusDraco]

I’m getting ready to test for my CDL but I’m just here down a rabbit hole! This was very interesting. Thanks!!

[@hansjansen7047]

The wonders of technology ! My '97 Pete had the old style bearing system, without the spacer, and when the bearings wore a little the inner race of the inside bearing moved ever so slightly outward , allowing it to spin on the spindle. Eventually all four drive wheel spindles needed to be replaced, normally meaning new axle carriers. An other option, much less expensive, was to weld new spindles on and a specialist was available for this. The new system put that type of specialist out of business.My '07 Pete had the new stuff.

[@rahmanrucker4408]

The best channel on KZbin hands down no competition

[@stevenliberadzki9160]

Finally a mechanic that knows not to lube the seal when installing it into the hub. So many morons on here using forms of lube. Says on the damn box not to. Also, no need to fill the hub be for you install the nut like that. On the hub as you can see in the video when you're rotating it there is a 8mm Allen nut you can remove to directly fill the hub. And also that torgue spec is 350-400 for that hub locking nut. I can gladly send you specs. But the shop you're in looks good enough to have that resource. Also enjoyed not seeing you get that last inch of when you're trying to line the shaft up in the diff lol. Video edit. Good luck and happy wrenching.

[@geoestrada5001]

This is like going to maintenance school, thanks again brother you have the best videos in this channel,

[@nacholibre5795]

Super job Adam, you hit all points and details and very clear instructional video, best video ever

[@TATEXPRESSINC]

That’s for watching. I appreciate the feedback

[@Makentz]

What's up, man! I hope you're doing well. First of all, thank you so much putting in the time to record this video and share your skills with us. I'm working on my Mack Master certification through my job. This last week our instructor walked us through replacing wheel seals and drum brakes. Our company bought an old Mack GU713 on auction for us to practice on before they rebuild it. Total beater, but a great truck for us to get our feet wet, especially since it's been through hell and back; every step of the way we learn from the challenges that come with working a well-"loved" truck, haha. Anyway, when I came home today I wanted to see another perspective on replacing the seals. I searched "replacing drive axle hub" on KZbin, and this was exactly what i was looking for. Man, you make it look so easy; I thought I was gonna throw my back out just trying to get the wheel back over the hub without a dolly. Thank you for all that you do and keep up the great work!! I look forward to checking out the rest of your channel. You just earned yourself a subscriber.

[@TATEXPRESSINC]

Thank you for sharing. We appreciate the support

[@clayensley5526]

Thank you. By watching your videos I have learned a lot. Your camera person does a wonderful job as well. Job well done by you both.

[@scottcasner9344]

nice clean install, also i like how u put detail in explaining why u do some things the way u do, but not to much detail. good video, good job. oh and the sound was better in this video

[@TATEXPRESSINC]

Thanks for the feedback. 🔧👊🏼💪🏼

[@ramman2941]

Awesome videos. I like the explanations of what you're doing and WHY you're doing it. Also, thumbs up to the camera person for getting great angles so we can see the process clearly. Subbed for more videos!

[@TATEXPRESSINC]

Much appreciated!

[@jessea1743]

@@TATEXPRESSINC would be awesome if you set a link to purchase the tools or recomed the tools you use I think for every purchase made by your link you get something thanks for the awesome videos an helpful tips

[@victordiaz2842]

Adam your very knowledgeable Smart & Etc. There’s a other you-tuber name ( Francisco Amaya ) & ( Truck Yoo ) . I watch all 3 of you guys and I learn a lot, keep up the good work. Also congratulations on the new location and & best of wishes.Keep those good video’s coming ! 🚛

[@TATEXPRESSINC]

Bugatti, we are having Francisco Amaya next week.

[@victordiaz2842]

TAT Express Inc. .. Yeah I seen he’s going to TX that’s gonna be a great video make shore your nice and Rested and give us a great knowledge show.. Blessings on the new location.

[@victordiaz2842]

TAT Express Inc. Also look at this if you haven’t SAD day in trucking. kzbin.info/www/bejne/oYHPgXd7pMSUjbs

[@MrJassa7677]

Thanks!

[@mandarkumthekar8565]

That's most detailed and thoroughly explained video. Good man you are good teacher.👍

[@matthew6202]

That’s a good mechanic right there 👍

[@dlbooneok]

I appreciate the video. Very clear and concise.

[@jorge58065]

Hey there! First time watching your video. Thank you for all that great information, very detailed. Keep up the great work. You got a new subscriber. I really appreciate you sharing your knowledge.

[@TATEXPRESSINC]

Glad it was helpful!

[@rathernotsay8185]

Giving the people what they want! Thanks Adam!!

[@TATEXPRESSINC]

Thanks for watching.

[@danielharrah9984]

Always appreciate the tech!

[@110texan5]

Nice to see tha big Boss showing tip and tricks. Texas baby 🇺🇸❤️👍

[@matthewmoore54]

Great video and very informative.. GOD BLESS YOU AND YOUR FAMILY.

[@evanalhashimi426]

Thank u very easy way to explanation and u approve that u are professional right way and quick repair God bless u

[@mjtheapprentice3166]

Im a new subcriber of yours, Thanks for sharing your knowledge sir adam, this instructional video is very helpful to a begginer like me. Keep up the good work and keepsafe always!

[@lindajdalton9184]

You're awesome! Love your music!

[@christianwilliams828]

I like this video and I like the video when you change the brakes on a eighteen wheeler

[@rafaguerrero2008]

making it look easy dude. Great video. keep up the great content. much appreciated. i hadn’t tried my adjustable prybar. I will now.

[@467inc]

You are an amazing teacher

[@jayjy1583]

Thank you my good man, for sharing the knowledge.

[@raulbriseno5502]

Very informative video, thank you. May I recommend ear and eye protection when using the tire gun. Thank you once again.

[@skid3339]

Great video, you’re a real pro brother, keep them videos coming 👏🏼👏🏼

[@pabloso8403]

I like that big drum you used. I'll make one for work. The fun part tho is when u working on a disc brake hub where u can't put it on a drum and got to change the seal.

[@Truckerbastard]

I love this channel. Thanks guys!

[@TheCarrparts]

Great explanation 👌 👍

[@mariosrodriguez9532]

Great video 👍 hope you do a volvo front leaf springs with bushings soon 😀

[@jaspercupp5724]

Putting Lucas on the inner bearing and seal helps a little too

[@SOPHIAFLYGIRL]

I generally pack both inner and outer bearings to ensure lubrication while the gear oil works its way back to the hub valley.

[@badcompany7674]

thanks for the information. great content youre producing keep it up!

[@TATEXPRESSINC]

Thanks for watching!

[@claudiosiguenza803]

Excellent demonstration and thanks

[@Tarasstelmakh]

100% content.Loved

[@TATEXPRESSINC]

I appreciate the support

[@LordsUNfilteredHoney]

Great, video very detailed!

[@TATEXPRESSINC]

Thank you!

[@gettinjackie12]

Aye great video man, can you do one of the scam bushings and replacement. Great channel man💪🏼💪🏼💪🏼

[@frank9649]

Thanks, if you have cups on the axle studs, my advice is to get new split cups if they were not split cups before, you will save yourself a lot of work getting them off the next time around :).

[@TATEXPRESSINC]

Thanks for sharing

[@c.a.mcneil7599]

Thanks I have 2 wet seals not leaking yet will get split cups. To replace.thanks

[@BURNETTWEALTHGROUP]

Very Very good step by step video Thanks I needed that

[@PTucker0864]

New subscriber. Excellent tutorial. 😎👍

[@djreggieduffleduffle3488]

Love doing axle,brakes,hub and tire jobs

[@moedogg27]

Thank you for your time and videos love them!!!!

[@efrenarana1756]

great content step by step thanks for sharing this

[@GILGAMESH1010]

The guy that showed me how to do this didn't lean the axle up against the truck where it wouldn't fall. And for some reason he got his creeper out and was under the truck when he kicked over the axle causing it to fall across his shins. He was limping around the shop for like 2 months. Same guy when throwing drums away in the scrap bin gets his finger caught which causes him to do a 360 flip and land on the gravel parking lot. I helped him find his glasses and didn't give him too much of a hard time but when he went back in the shop the boss said why are you covered in gravel? and I lost it!🤣

[@marcelcovaci9922]

When you remove the axle and take the hub assembly out, you can slide out the whole tandem out. This way you don’t have to remove the wheels one by one

[@marcelcovaci9922]

@hopebrowning6300 …many dealerships have a dolly for the tandem to be pulled off because it saves time. But hey, each to its own

[@northwest8654]

Thanks for making this video

[@TATEXPRESSINC]

It's my pleasure

[@makeitpay8241]

i think i would have put the sandpaper to that tone ring & cleaned the windows as much as possible, the rest looks good, thank you.

[@EveraldNeilForChrist]

Love your videos. Thanks for sharing. Keep up the good work.

[@stephenjames1844]

Awesome vid Bro!

[@westmartell1916]

Good stuff bro thanks for showing how it’s done

[@br1022]

NEVER use Sandpaper as it will pollute the oil and bearings leading to a failure. Use a Scotch-Brite scrub pad instead.

[@alanpumphrey9639]

Funny how ConMet includes coarse and fine sandpaper with their wheel seals. But yeah I agree

[@88miken36]

I agree with alan. Ive used sand paper on over 200 wheel seals and i have never had any problems. Ofcourse i sand and clean areas with brake clean

[@timekeeper5275]

👍 scotch Brite is the way to go.

[@enragedplantera5585]

I sand then brake clean them heavily no problem ever

[@wadeariss448]

Never sand without cleaning maybe

[@vuta4271]

Thanks for your video. This helpful for me.

[@Mrs.IndiYoung]

I subscribed. Hey, TAT for TAT.

[@oakley9094]

Wire brush to the tone ring do not use sand paper or use a buffer, clean the ABS sensor and than push it foreward so it's flush with the tone ring before reinstalling the tone ring or hub ( hubs have tone rings built in or replaceable depending on the hub ) clean the ABS Sensor after pushing it forwards, any prybar will do, if seized replace sensor or free it up and check for functionality than remove and clean, than reinstall with grease ) also clean the bearings and re-oil them before reinstalling don't just wrap them up even if they are somewhat newer or new.. contamination happens. Also clean the hub pilots up with a rust needler (Best outcome) or a wire brush or even sand paper to get corrosion away and use copper never seize to the spots the drum will seat after the tires have been torqued down, so many mistakes that can cause you hours in later hours of service in this video, i know its a demonstation but be realistic.

[@vicpetrishak7705]

The correct wheel hub seal driver locates on the step of the seal . I apply a small layer of #2 Permatex on the outside diameter of the metal style wheel hub seal .

[@stephenjames1844]

Great Video Brother

[@alejandro020569]

Great Video!!!!!

[@TATEXPRESSINC]

Thanks for the support Alejandro. Be sure to hit the sub button. We have more content to be released.

[@terryj-londonontariocanada4605]

Great video! Can you tell us which year did Volvo start using the newer style spacer?

[@TATEXPRESSINC]

Thanks watching

[@pablosoriano9259]

Thanks to share you knowledge

[@reynaldogarcia3675]

Bro .. great job

[@joseespinoza-on8ve]

perfect keepon saludos desde Mission Texas

[@cidlecingle]

I think you should wear safety glasses for security purposes sir. Just saying.

[@thomasturcotte4051]

Great idéa dude

[@djtorres36]

Very good job brother

[@michaelbritton2331]

will you be my mechanic fantastic video thanks for sharing knowledge..🙏

[@RonaldLouime-d6i]

Good job 👍👍👍👍👍👍

[@titor.619]

Excellent I learned a lot. Thanks 💯👍

[@igisvlogs]

So it uses oil in the hub bearing from differential to lub bearings ??

[@jacob2483]

Nice video! Really helpful!

[@ray8535]

Great video man, what size is that big socket for the locking nut, I got volvo and want to get one to do seals. Thanks

[@rashpalsingh1298]

Brother I watch all your videos ❤ I like the way you explain step by step but im missing one thing what size is the seal number I know every truck has different sizes but on Volvo what is the number would you please let me know thanks ❤

[@yourhealthisyourwealth.]

Nice one bro!

[@renatoruiz3609]

Perfect videos buddy 👏🏼👏🏼👍🏼👍🏼🇨🇦🇨🇦

[@frankbarberi4674]

You are superior. Thank you. I will say that Ithe rock music puts me off. Am I wrong to say that rock music played where precision work must be done means that the rocker is or was taking drugs. I turn the sound off when the rock goes, because you have the heart of a teacher, you are honest, and you do care. Thank you.

[@TATEXPRESSINC]

Thank you for watching and sharing. The music is added after the filming. We appreciate your feedback.

[@payasopayasito8256]

Thanks I learned things about thanks 🙏

[@gripnripracing3157]

Good video but I'd suggest a hub without a bearing shim the bearing preload is tricky for people that don't know how

[@notchfox6086]

Thanks for the video sir!👍

[@isaaccharles1189]

Great video Adam greetings from the United states virgin islands in the carribbean st.thomas us territory I am new to your channel and I am a journeyman heavy equipment Mechanic my dad was a diesel technician he taught me most of what I know so far he passed away last year I like the content what size is the axle nut socket are you hiring in Texas send a link to the application thanks for the videos already subbed God bless and be safe out there

[@ስገምሃዘጋ]

Thanks you for doing this.

[@josedejesusflorespliego9273]

Thanks for sharing!!! I learn a lot!! Thanks!!!

[@TATEXPRESSINC]

Glad it was helpful!

[@bubbalee6780]

Great video how about one on the different locking nuts

[@JavierReyes-kt8mk]

Thanks,good job👍

[@IndianTruckWorkshop]

Great work buddy 👍👍👍

[@retrolee]

Great video ---subscribed!

[@piotrtomaszek5316]

Hi I was wondering if you did a video on how to replace those bearing races. Also we’re can I get a socket like that , or is it homemade? Lastly how can I look up torque specs on any make or model of truck/ is there a specific web sit or is it out of a service manual? Thank you

[@urioropeza7010]

What size is the socket to remove the axle seal 😊 👍

[@ukayhemi6385]

1 1/8”

[@carlospastran3527]

The axle flange most likely 15/16" and spindle nut a 4" six point.

[@efrainflores9614]

Can you do a video on how to place jack stands