Taurus Tracker Revolver Disassembly

[@SightUnveiled]

I just wanted to say thank you for such a helpful walk thru. I have taken apart my 12gauge ak ar7 and my 9mm for a complete clean and oiling... just got a taurus 44. ... thought I had a good grasp on things.. I was so lost it threw me for a loop.. your video helped so much. Thank you again and again and I truly hope you are being blessed.

[@DeathMetalMoe]

This video really saved me thanks! I took my revolver apart and it wouldn’t go back together correctly. I followed the video and learned a lot about the inner workings of my 605 Taurus. Thanks!

[@jiantan4569]

Thank you very much! You saved my life! I dissembled my Taurus 94 and I couldn’t assemble it back. Your video is so helpful and I learned a lot from you! God bless!

[@lk3013]

Hey man, thank you so much. I disassembled my Taurus raging hunter in .44 mag and it was exactly the same as you mentioned in the end. Its been 6 months since I've fired this beast and now I'm going to have a great father's day tomorrow!

[@mikegorton691]

thanks a million. took my 7 round .357 to the range and trigger would not return. Was afraid to take it apart so watched your video- thanks a million for a really great detailed video- would have ended up taking it to a gunsmith....

[@renatoamericano2335]

Great video, thanx my friend to North America from South America. S&W and Ruger are 3 times more expensive in my country than in the US, cause of taxes. After seen this, I have no prob to buy that gun from brasil with less taxes. You helped me a lot! Saludos cordales de South America

[@chicomccombs1099]

I always like to find a disassembly/cleaning video of any firearm I plan on buying so I can learn it backwards and forwards, very good job on this video, 1 of the best and informative ones I've ever seen, I will subscribe for sure

[@glc5858]

The trigger return Spring to use is Handi-pack 881 From Menards 5/32 ×1 5/16 × .o23 WG

[@TranceMechanic7]

So I found something that helped immensely with the tightness of the cylinder crane. I pulled the detent spring out of that first screw, and clipped about 1.5 turns off the end of the spring. Reinstalled, and now with the screw tight the cylinder crane freely moves in and out with little to no resistance aside from the latch pins.

[@usdc995050]

Just bought my first tracker glad I found your video. This will come in handy for take down and clean ups. Nice job thank you!

[@damian-offthegrid4092]

Would not have gotten my Judge back together after cerakoting if not for this video. Appreciate it 🇺🇸〰️🦅

[@The1jonnyz]

Awesome video. Thanks for taking the time to show us how it's done!

[@dmanisgnarly]

Picked up a pile of parts on the cheap. Made a few springs and pins and had a functioning M44 in a few hours. Thanks for the DIY!!

[@michaelcabiroy8126]

Thanks for the video. You saved my butt. My firing pin retaining pin fell out and I had no idea where it came from until I watched your video.

[@williamdulohery2728]

Great video. Btw you can hit the grip frame to get the side plate off. Thanks for the video. Helped me a lot to get the internals out

[@RubenFletcher]

Bro! You just helped me fix my .44 Magnum Tracker with your video. Thank you!!!

[@alanfrazer4784]

Thanks MUCH! Well detailed and the explanations are very clear.

[@emmeponto]

Excellent vídeo! As a brazilian I couldn't find a better video on national youtube channels. Thank you

[@IntoTheWildernessBushcraft]

Great video. Thank you so much for sharing!

[@rexr247]

maybe someday after lots of rounds I'm gonna do this for once, for now it's just too complicated for me haha.. thanks for this! well done, cheers!

[@devinking6677]

Thank you for video. Have the tracker 627 as well. Didn't get the ribber grip like I did on the judge.

[@darrelllee7946]

Right on ,I just bought one from a guy ,not a tracker but basically the same. The reason he sold it was he fell on it ,broke the thumb off the hammer and sheared the pin inside that the hammer slides onto. He was traveling by in a kyak. And I offerd him a beer. He told me his story. I offerd him trade for a shot gun,or $ 400 . He took the money. Hopefully he can buy a bear pistol at his next stop. He has bear spray right now. I could send it to tarus there real good abought stuff. I know from exsperiance. But I decided to drill it out and make my own hammer pin and the hammer thumb has just enough left on it to cock it. I could of offerd him less for it,but for me I feel I like it was a win win for both of us. He said he paid $450 . So it was only a $50 learning curve for him. Any how good video it helped.

[@vetteluvnh]

Outstanding! Thank you

[@greggsellers2106]

Great Video! Thanks!

[@TRRGuns]

Glad you liked it!

[@milboltnut]

when tapping on the frame where the grips go tap farther down toward the end, and it will have more effect jarring the cover loose.

[@highwayman1224]

Just ordered a Tracker with a 6.5" barrel online today, can't wait to get it!!

[@silvirhunter3607]

how is it? looking at picking one up myself.

[@highwayman1224]

@@silvirhunter3607 only shot it once but I think it's awesome.

[@sstaub]

Thank you. This helped immensely while stripping my Taurus 617. Greatly appreciated......

[@kluper1157]

Best vid BIG TIME! thank you!!!

[@TRRGuns]

Glad it helped!

[@emmeponto]

I have just done it. Thank you very much!!! Very easy after done.

[@kulahawaii1983]

Great Job brotha... thank you

[@mikemild13]

Well done video. Thanks for posting. Stupid question... I am new to Taurus revolvers (have quite a few Rugers though) and was wondering, does this video also apply to the 992 22LR/22mag? If you said so in the video I apologize for missing it.

[@louisleoncini9240]

Thank you, when you know what you're doing its easy.

[@robeirne1001]

I'm considering purchasing this gun, could you tell me what problem you had with the star ejector and how you resolved it? Great video. I always look for videos like this that shows the details on disassembly before a purchase.

[@thelordofthetowels1488]

Out of the 9 years I've owned mine, the only problem I've ever had is a cylinder stop malfunction. Cylinder stop works fine in D/A, but the cylinder stop stays down sometimes when working the hammer for S/A. Actually just started happening the other day, but it like locked up today, and I had to push the trigger forward to get it to unjam.

[@mkshffr4936]

Would it be a little easier to take the cylinder out before removing the side plate and springs?

[@HReality]

I commend your skill on the rebuild being upside down. VERY much appreciated.

[@timothymccarter9404]

You never , ever "pry" the side plate off , you'll end up screwing it up !

[@glbshooter]

ottimo, grazie

[@mrwilliams2492]

I JUST bought a new one last week and wanted to know... does the cylinder release have a little “wobble” to it naturally? The screw is in tight. And it works as it should. Just want to know is it supposed to have that little bit of slack (if you were to take your thumbnail and wiggle it)? First revolver owner and wanna make sure I’m not about to go fire a grenade lol

[@ericb.4358]

My .44 mag. Tracker id totally reliable and id for one purpose - namely for protection from bears!

[@davidstarling3333]

Thanks for the video. A friend just bought one like this and his cylinder slides out. After watching this video it looks like the little piece you caught in your hand after removing the first of the three screws is missing from his. What did you call that little piece?

[@TRRGuns]

My apologies for the late response. That is the cylinder yoke screw. The Smith and Wesson part number 219860000 is generally interchangeable with the same screw on the Taurus.

[@davidstarling3333]

@@TRRGuns thank you

[@bennettwinn4809]

Great video, I'm having some trouble with my tracker 44 and was wondering if you would elaborate on the problem you were having with yours. I just replaced the ejector spring, but I am now thinking it may be an issue with the center pin, or center pin spring. The cylinder feels "bound" when cocking. Thanks for any info. Keep up the great videos.

[@sugargooslin6473]

I'm having same problem what was your fix please

[@jadz684z]

Have you polished (in reference to trigger pull) anything on the gun?

[@sugargooslin6473]

What problem was you having I have same gun and sometimes its gets hard or even impossible to cock on like the 6th or 7th round any info would be greatly appreciated thx

[@TheGene71]

My robber grip is getting kind of whitish, what you recommend to clean the robber?

[@joemas8695]

What spring kit will work in a Taurus 692 3"?

[@rolytech212]

Assembling it back I don’t see any oil been rubbed lightly on parts.

[@leswilliamson3587]

Great video, how often do you do this. I had a S&W I have shot for years and never gone that far into it.

[@TRRGuns]

In the case of a revolver, unless something breaks, you may never need to go this far into it.

[@robertvaughn7358]

I want a revolver but I'd be nervous wreck to take it apart to clean it like this

[@bradharvy13]

As he slams his cylinder into the frame!! Lol

[@jessemoore4904]

Hey does anybody know if you can switch out the barrels on these I have the 4" and would like to switch it to the 2" someone told me I could but I'm not sure

[@TRRGuns]

Yes, all the trackers should have the same barrel thread in the receiver. It will likely require some machining to make sure the barrel clocks correctly and to ensure the proper cylinder gap.

[@justinbellio2285]

Hey Justin I met you at Shoot smart probably about 6 months ago makes me curious what range did you wind up going to and where is it located also ironically that Taurus is the very first gun I ever bought exact same on the Taurus tracker 357 7 shot

[@justinbellio2285]

Surprisingly I paid exactly $500 even for that in 2008

[@TRRGuns]

Justin Bellio it was not a shoot smart range for this test fire. I won't say the name, just that I wasn't quite satisfied with the service, but I have a unique view and experience that many don't share.

[@TheGMan1776]

Where can I get a set of springs for this gun?

[@emmeponto]

Sir, do you hava any sort of manual for the assembly/disassembly? I can't find it anywhere...

[@TRRGuns]

I use schematic drawings as a reference

[@emmeponto]

@@TRRGuns And you made them yourself? I'm probably making something like it, but I really think that taurus must have something already done. Thank you!!!

[@TRRGuns]

@@emmeponto no, I get them from Brownells or Numrich

[@LucianofSilveira1984]

Muito bom! abraços do Brasil

[@devinking6677]

Ruger gp and smith compared at reasonable price. Like the satin finish hate the big tracker on the barrel

[@MrArtemioP]

How do you get parts? Taurus seems to have an iron grip on their parts and for some reason doesnt want to part with them. Dad humor. But seriously those guys have a issue with selling them.

[@mrwdpkr5851]

Brownells sells used revolver parts

[@charliehustle2591]

Thank you. Makes it much less daunting.

[@kernypnp9714]

Is that rust on the metal

[@abdulrahmanaljamea8458]

Revolver looks very simple from outside but actualy its more complicated than the magazine type!

[@akgeezer]

Very informative! Thanks for the demonstration of this procedure. However, I have to disagree with your assessment. This IS complicated!

[@TheHexeract]

video starts at 4:25

[@giorgiogiorgio1087]

🇮🇹👍

[@healthyliving3020]

👍⚡️🔫⚡️👍

[@Matheus-mw4rm]

No lube ? Or WD-40? 🤔

[@baretruth8438]

Great video, very poor lighting.