TBW Performance Under Tray Install on my 2016 Subaru WRX STi

[@niral114]

Just installed mine in my 2015 STi. Your video is a tremendous help. Only thing I had to do was drill a hole in the front plate because I have a front lip.

[@TattooLost]

I'm really glad it helped! These really are a life saver for oil changes!

[@niral114]

@@TattooLost Thats the reason why I got it. I posted a pic of me doing an oil change on instagram and someone mentioned TBW

[@circusbackflip]

Thanks for your Video ;D

[@TattooLost]

Robert Saucedo Thank you!

[@JTSJCS160]

Thanks for this! Made my install so much easier.

[@TattooLost]

Jefferson747 glad I could help!

[@bigpizzachef]

Just used this for my install! Thanks for being the ultimate guide.

[@Karlman93]

I'm taking it no issues with the grounding strap? I felt the same way you did putting mine on.

[@TattooLost]

Never did have any issues. Sadly I no longer have the car though.

[@sukotto2579]

Great video, I was completely lost with the instructions on the TBW website. I have a facelift (2018+), the only difference for me was that I used all 4 of the push clips at the front and didn't use the U-Nuts. My first attempt I used 2 U-Nuts but they stuck out a lot, the push clips sit more flush

[@TattooLost]

Thanks! Glad I could be of some help!

[@johnismaelcariazo6404]

No rattling noise?

[@TattooLost]

@@johnismaelcariazo6404 I never had any noticeable noise from mine

[@johnismaelcariazo6404]

​@@TattooLost Nice. What thickness did you get? The regular, stronger, or off road?

[@TattooLost]

@@johnismaelcariazo6404i got the regular

[@brianvandell5969]

Thanks a ton for the vid. The instructions on the site are for the 08 sti. Confusing as hell when you're already greasy and under the bitch.

[@shredder8910]

Thanks bro, wouldve been puzzled at those u clips without your help!

[@TattooLost]

Tristan McPherson glad I could help!

[@jonathanb1987]

Any extra wind or whistle sounds after the install?

[@TattooLost]

I never noticed anything at all. I have muffler deletes so my car was a little louder, but never noticed any whistling or anything after the install.

[@wcdjmase]

Awesome, just ordered a set for my STI. Thanks for the video

[@TattooLost]

Great! Let me know how it goes, or if you have any questions! Hope my video helps!

[@wcdjmase]

TattooLost it definitely will help. I'll let you know how it goes.

[@wcdjmase]

TattooLost all went well pretty easy install. Like all skid plates, leave them loose until all the Fasteners are in

[@TattooLost]

Adam Kushner glad to hear it! And yeah, definitely a must to leave them all loose.

[@schnurf]

Hello can you tell me if you see any engine temperature improvement? I mean, less oil temp? Regards

[@TattooLost]

schnurf73 I never noticed any differences honestly. Never really looked at before and after though.

[@adamswartz7670]

Thank you bother

[@TattooLost]

Adam Swartz happy to help

[@whocares5188]

So are the wheel splash shields ends just flapping around?

[@TattooLost]

No. They're bolted at the top to the car, and at the bottom to the undertray itself.

[@getlikeaddy]

About to try my hand at installing my skid plate here in a few. Is that an Akuma “death” symbol on the back of the car? Haha

[@TattooLost]

Nice! It's really pretty easy once you figure out the orientation of everything. Hope my video helps! No Akuma symbol I know of. If you're talking about the kanji symbol above the "STi", that's a logo for Red Dragon skate apparel out of Canada! Red Dragons!

[@chrisfigueroa772]

Have you done an oil change since installing the skid plate?

[@TattooLost]

I haven't yet. I'm out of town working, and I just took it to a local Subaru dealer. They said they appreciated not having to take off the undercarriage. lol

[@whocares5188]

Sell my the oem one