TEAM ASSOCIATED DR10/MACLAN FULL SETUP | EASY FOR BEGINNERS | TESTED RESULTS AND NO SECRETS

[@afu-2levy194]

This is the only guy that makes sense. all the gimmick, bling and chassis changing is a waste of money. Fine tune what you have and save the money !

[@reallythough4591]

Not all of it. Some guys are running under 1.5 seconds. He's helpful for sure, and I feel great about my 70mph 2s dr10

[@user-vb3dg3pb6s]

Different ideas, I get 75mph easy from the stock motor and esc combo the rtr dr10 comes with. Hand built heatsink with twin alloy bearing rocket 30x30 fan's - 1 punching cool air onto the motor and 1 reverse prioritized pulling out hot air from the motor for easy back to back runs. Silicone tube on shocks and set up as low as it gets with a hand made front splitter and a hand made rear diffuser for loads of downforce, hand made rear sway bar set, hand made side pods, hand made side aero chassis set.$40 spent on a few parts couple of pinion gears, steel spur gear and that's all. Nice video

[@Dorkyand40]

awesome man

[@reallythough4591]

75 on the stock 3300 reedy?

[@Danny.fb6]

@@reallythough4591bro I doubt he’s getting 75 from that stock reedy motor 😂 I tried running a 75t spur & 30t pinion & it bogged out, so I doubt he’s running 75 on stock electronics lol

[@reallythough4591]

@@Danny.fb6 I know he isn't, but I can tell him how. That system won't do it on 2s in 132, but it can be done. That motor works for bashing, but drag ain't it.

[@WickedMoto]

Also another great tool with the GNSS is if you go to share it you can select excel spreadsheet and match the times between the Maclan drk and acceleration points etc

[@Dorkyand40]

Great tip!

[@mrcollins63]

Your videos are very informative. Thanks for the info! Keep em coming please!

[@Dorkyand40]

Anytime. Trying to keep everyone straight. Thanks man

[@thercsniper1138]

You had me at ''Dorky and 40''.......i subbed......

[@Dorkyand40]

awesome lol

[@tomcollierblognation136]

Thanks for this! My chassis gets delivered today 👍🏾

[@Dorkyand40]

Enjoy the build. Keep it simple. Spend the money on good stuff and not tricks. It’s all on here.

[@nd4656]

The proper time-stamps: 13:25 front end 14:00 shocks 15:24 wheels 17:05 motor mount 17:18 wheelie bar 18:30 gearing 18:39 diff 19:05 slipper 19:55 tire prep 20:40 battery placement 21:50 sway bar 22:05 other stuff 23:04 tune Always write your time-stamps properly.

[@Dorkyand40]

Thanks

[@lukef5370]

Man I been messing with RC cars for a long time, mostly bashers, a couple race cars and a speed run Vendetta. I'm new to drag racing and when you started talking about turning up degrees, bell timing, phases,etc on the motors, I had no clue what you were talking about. I feel like I'm in way over my head. I just want a 3 second or less DR10 and I'll be happy. What can I get to achieve that without having to get motor analyzers and all that technical mumbo jumbo.

[@Dorkyand40]

Go back through my journey on the channel. It’s all there. Dr10 included

[@RazorRoo1989]

Hey D what's up Budd. I'm running the Tekin G4 eliminate redline 4.5 turn set at 20°. And that Maclan esc. I have a monster on my hand. Lol Gen ace battery 6000mah 130c. I'm trying to compete. Ttyl D thanks for what you dude. Very informal you are.

[@Dorkyand40]

Np brother. Burn em off

[@bulldogbradford8081]

Dope video Fam!!!!

[@Dorkyand40]

Thanks 💯

[@mikehalverson8017]

Who makes the magnets you are using to mount your body?

[@Dorkyand40]

There is a link below in the description for them.

[@kmodkese]

What's your best ET/Mph so far with your DR10?

[@Dorkyand40]

about a 2.6 at 61mph

[@1outlawtrucker]

From stock? Out of the box? I say B.S an prove it with video

[@GreatBirdOfHope]

What size pinion gear and spur would I need to run a 5700kv castle mamba in a dr10 without issues?

[@ptshyu2]

Can’t wait to get the losi 22s roller with the drk160 and drk4.5t and is anything else I’ll need as far as the motor and esc like wires that don’t come with it?

[@Dorkyand40]

I’m sure most of my advice for the dr10 will carry over. Just keep it stick and simple and tear the rtr down and build it back up right so you know what’s going on inside. Like the fluid weights for example.

[@ptshyu2]

@@Dorkyand40 but the motor/esc comes with the sensor wire and everything as far as just those two

[@Dorkyand40]

The maclan motor has the sensor wire in the box. Manufactures do things mostly the same so any sensor motor should have one but check their info to seen They are universal so any will fit.

[@rugbymillzvlogs]

thanks for giving me a noobie in this , i got a 23wd rustler i might convert becasue i just broight the c8 4tec 3.0 i would have saved that money and built up

[@Dorkyand40]

Those c8 are nice man

[@rugbymillzvlogs]

@@Dorkyand40 thanks maybe I will see if I make to my own next drag with some Parts but people gonna hate even if I disconnect the 4wd

[@mikespillman3075]

You had me at ''Dorky and 40'' i subbed..........

[@Dorkyand40]

thank you sir :)

[@paulbrauer3911]

What was the sticky substance that you said that you put in the battery box?

[@Dorkyand40]

Ummagrip. It’s made for fpv quads by a company. It may be on Amazon. There’s the light which is what I use that’s blue and a thicker black version.

[@manuel39164]

Thanks Bro Very good Video

[@Dorkyand40]

Thank you sir

[@lucas884001]

hey whats up man do you have the links for all the parts? it was a great vid

[@DadSquad_Cisco84]

Are you running on 2s or 3s?

[@Dorkyand40]

2s always

[@JJRrcracingfoam]

Ty

[@rong648]

Which servo horn are you using?

[@Dorkyand40]

It’s the associated one. I have the model number in my dr10 servo video.

[@rong648]

@@Dorkyand40 I will check it out.

[@powermadracing5116]

Did you really just say it's just the ESC... the suspension and gearing and combination. Its not as important I was always taught it's a complete combination at 10.10 and ditch the slipper.. great Channel

[@Dorkyand40]

You can go down all those rabbit holes or keep it simple. I’m getting great results with that theory right now. Down the road I’m sure I’ll need to make changes. But for all the new people getting into no prep I feel it’s best to not overwhelm them and show them a simple setup without a bunch of hyped out bling can make them have a way better experience then I did when I started out. The maclan launch control is the ultimate cheat mode to make your car tame and go straight for sure.

[@powermadracing5116]

@@Dorkyand40 ok

[@walllee814]

Did you vent tires or wheels in the rear?

[@Dorkyand40]

The split 6 are vented. Tires are not. No foams

[@walllee814]

@@Dorkyand40 thanks man

[@RandomloserDK]

5:18 what are those used for?

[@timothyrichardson4740]

What gear and pinion are you running, 84/ 22

[@Dorkyand40]

Yes. With timing adjusted as per the video.

[@ant337]

Learning a ton from your videos. Thank you!

[@Dorkyand40]

Man that’s great. They are about to be better as we have a lot of gear coming so we can test and compare some of the top stuff being used.

[@Gazelle0078]

Can u post a link to the 3D print for the extended shock tower and to the bead locks

[@Dorkyand40]

www.thingiverse.com/thing:4559092

[@Gazelle0078]

Can u post a link to the bead locks and the carbon fiber ring ? I’d like to get a set

[@Dorkyand40]

amzn.to/3wiaBe1

[@Dorkyand40]

beachrc.com/assault-rc-revolver-series-carbon-fiber-beadlock-rings-split-six/

[@Midwest-RC]

I’m here !! LOL

[@Dorkyand40]

Hope it helps man!

[@thomasdowneyjr.4162]

i cant wait to see the traxxas drag car nothing more about that car any where

[@Dorkyand40]

I ran a converted slash last year. It was ok. Hard to compare since the esc and firmware is so much better. But I’ve heard it the same thing. Lcg slash with bandit arms. That’s a literal drag if it’s true :(

[@Serenityindailylife]

Did you just get an eye exam? Hope your eyes get better...

[@soulbrother3299]

Be awesome if you did a losi 22s build!! And yes I'll tip you soon!!! That's a promise! Again from Georgia...I made a mistake earlier I said I have smh batteries actually smc batteries for my Infraction v2..anywho your channel is awesome your number one on my list and like i said I'll send a offering soon..what's knowledge if you keep it to yourself? Again thanks..wish you had cashapp...my PayPal wont work but will keep trying..donation of 20.00 bucks for beer...I'll be using on the losi for the battery cnhl 5600 ..100c I have a 19yo as my builder..was using 5200 zeee borrowed tomorrow we headed to a swap meet..so we will put the xt90 on my new battery for the losi 22s I'll check to see if your on fb or ig so I can send pics..

[@Dorkyand40]

No worries man! Keep watching and learning and always feel free to reach out

[@soulbrother3299]

@@Dorkyand40 awesome sir!!getting ready for swap meet..yay