Tear down of Samsung flex washer

Simple break down of how to tear down the user interface and gain access

[@JMCTech]

This is listed as a tear down of a Samsung flex washer but in reality, it should be listed as changing an electronic control.

[@FLJAMESFL]

Awesome to know, thanks.

[@KyleBurgess-gy3kl]

JJ, can you walk me through the process of tearing down the top washer in order to replace the softener dispenser?

[@ApplianceRep]

There is another video that shows u how I replace a drain pump just go from there

[@MrLateShift]

How's it going JJ!? Did you ever figure out which pins to checkout the voltage? I have a wv55m9600av/a5 and the side loader stopped working mid cycle. I was eventually able to figure out how to drain it and open the door 🤦. But now only the top loader works. The side loader display only chimes after 30sec of hitting the start button. The parts are expensive and I'm doing my best just to buy what I need. Any help would be greatly appreciated. Thank you for getting me this far!

[@ApplianceRep]

I did but I don’t have the video I lost my footage thanks for watching

[@texaslopez5846]

So if it’s giving you those weird alien symbols like you said, what would you change out? The 2 boards behind that panel where you touch the buttons???? Please help me sir

[@maryannnoces2747]

Thanks

[@Eicengenharia]

I am trying to buy this same panel board to my machine but as we took this model from USA to Brazil we are in pain to find it even from local Samsung, can you help us sending this to us ? Thanks for the video

[@l.hanley9742]

Hi JJ. Could you tell me how to open/remove the top of a flex dryer? I am a tech in CT. Have never seen these before today. Thank you.

[@ApplianceRep]

Send me your email and model number

[@MrsGSXR11]

Where can you purchase this product? Can you provide a link?

[@edithmonrreal5430]

Hola tengo una lavadora igual y de repente ya no prendió la lavadora de abajo que puedo hacer

[@mepoindexter]

I have this washer. When I select my wash and press play nothing happens. No error codes, the machine just doesn't start. Any idea what this is?

[@TheFlxsh]

I know im a little late, but did you ever find a solution??

[@Tajbabamh]

how is this washer your opinion iam planning to buy

[@ApplianceRep]

sameersam sam check out my video hass app training this other 2019 model is not a flex but a front loader and it’s the Cadillac of Samsung washers

[@swayfn298]

Good afternoon sir. I have a samsung flexwash model wv55m9600av. It rarely turns on and when it does the display starts flashing 18:88, 2 minutes into the cycle. Any idea what could it be. Thanks for your help.

[@ApplianceRep]

Fade mist does it finish the cycle will it let you wash we’re exactly are those numbers top display or bottom display and could be a firmware issue with the display starting to show issues

[@nathancelaya2395]

@@ApplianceRep I have a small issue with my flex washer top washer. I am getting a 1dc4 when I try to start it. which is fairly common on these. Something with the top lid not locking. I checked for the rubber button and seal. Everything is there. How would I go about checking the latch switch? Any help would greatly be appreciated!

[@naminsky]

Tienes numero u have number your in dallas

[@sonichuizcool7445]

Samsung sucks dont it bro? Lol hate that brand so much