TEARDOWN | VAXEE NP-01s Wireless

[@mel0nFPS]

⏲ Timestamps: 00:00 - Intro 00:37 - Removing Base 02:53 - Removing main-board 03:53 - On-unit Control Buttons 04:04 - Power Control Slider 04:30 - Top Shell Disassembly 05:24 - Main Click Removal 06:42 - LED Indicator Board Removal 08:03 - Removing Side Buttons 08:27 - Central Shell Disassembly 08:38 - Removing scroll wheel and main click board 09:26 - Removing side click board 10:04 - Battery removal 10:47 - Reassembly Process 10:49 - Reinstall side button board 11:50 - Reinstall scroll wheel and main click board 13:30 - reinstall LED Indicator board 14:09 -Reinstall central shell into top shell 15:32 - Reinstalling main clicks 16:59 - Base reassembly 18:38 - Unit Reassembly 20:53 - Outro

[@Dodbackwards]

Watching this on a school day is pretty nice

[@sa17dk]

Really clean video and unique content. Thanks for the teardown!

[@RX_TXG]

the teardown of this mouse was pretty cool to watch, however, the glorious air gaming mousepad is a great mousepad that you should totally review

[@drew9429]

Hi I followed your teardown video, my lmb main click was not actuating after reassembly. Found out that you need to slide the main clicks pcb down before screwing it. Just want to bring this up since it was not shown in the teardown video and might be the reason why you said you "broke" your np01s clicks. Managed to successfully replace my clicks to Transparent Huano Blue shell Pinkdots. Thanks for this guide

[@mel0nFPS]

Thanks for the tip! I'll try and and see if I can save my poor NP-01s 😅

[@drew9429]

@@mel0nFPS Glad to help! Appreciate you posting these teardowns :)

[@jorkfkrn18]

The left click didn't work with the same symptoms. Thanks to your advice, I was able to spot and fix the problem. Thank you so much. :) 감사합니다!

[@Gdai.]

Hey not sure if y remember me if STEALTHY but I think u should try uploading the new FPS game The Finals

[@Snook_]

Is the scroll wheel 16 or 24 step?

[@VCM5]

Hi there, do you know if the main switch pcb is compatible with the standard size NP-01 wireless? Thanks

[@mel0nFPS]

Hi! I don't have an NP-01 to check, I'm going to assume yes since VAXEE's shell designs are pretty similar but I can't confirm sadly.

[@PaPaTheStallion]

What scroll wheel encoder is that mouse using ?

[@mel0nFPS]

ALPS Optical Encoder! I wasn't able to figure out which one since it's so tightly installed in the mouse sorry!

[@Joshersaviation]

You have 737 views like the Boeing 737. Hi melon! It’s me cake, from a few months ago at the end of the aimblox days

[@F4ust-crw]

hello I know I'm late, but any chance for an Outset AX wireless teardown guide.

[@mel0nFPS]

Hey! Sadly probably not, haven't been able to get my hands on a unit. And if the OUTSET is anywhere as complex at the NP-01s I wouldn't recommend taking it apart anyways.

[@F4ust-crw]

@@mel0nFPS Ok got it. Thanks

[@JamessLuner-wi2qs]

Hello mel0n, my M1 and M2 won't rebound after reassembly. Everything seems to be fastened correctly but as soon as I tighten the M1 and M2 screws, they no longer rebound. Any pointers? Thanks!

[@mel0nFPS]

Hey! So I acctually had the exact same issue with my NP-01s’s main clicks but I haven’t been able to figure out what’s causing the issue. My assumption is that the anchoring screws for the M1 & M2 screws are very specifically tensioned but I haven’t been able to verify it. A couple other people have followed this guide and their clicks are fine so I genuinely have no idea what’s causing this.

[@JamessLuner-wi2qs]

@@mel0nFPS Dang that's too bad! I'm very big on repairing my own electronics so this experience has kind of turned me off from the mouse. I'm gonna keep playing with it and I'll let you know if I find a fix. Thanks!

[@JamessLuner-wi2qs]

@@mel0nFPS Hey Mel0n! I got mine working. What I did was I sanded down the point on the mouse button which contacts the switch. I just sanded slowly until the switch started clicking again when installed. Hope this helps!

[@mel0nFPS]

@@JamessLuner-wi2qs Oh that's a great solution! I'll have to try that myself!

[@drew9429]

You need to slide down the main click pcb before screwing it in, there are clips holding the pcb just beside where the ribbon cable is. I've had the same issue and it was not shown in this teardown