Tech Tip for the Ultimate Narrowed Beam for a Classic Volkswagen | Trimming the Adjuster Bolts

[@AirkewldVWs]

The PRObuilt Beam and the Ultimate Beam will need your assistance in your LOWLIFE VW by trimming your twigs and berries. Visit them here - www.airkewld.com/PRObuilt-Beams-s/2486.htm

[@daviddahlberg465]

Your attention to ALL details is the reason why all your products are top notch!!! 5⭐️

[@duanesiefke7163]

Great tip to make sure that is not hanging down! Thanks

[@andrewfrasquillo2271]

Good morning Pete, you know the fact that you made a video for something this simple, BUT, very important (safety wise for our families as well as our vehicles) that so many over look is awesome!! 😎 10 stars on this video. P.S. Happy Father's day Pete.

[@jeffroagogo5215]

Some years ago, after I broke that set screw off of the 1st beam, I bought from you, I fixed it with the parts you sent out to me THX! Then I installed a skid plate, so never more...

[@AirkewldVWs]

Skid plates are not the best when gas lines and filters are questionable towards the rear of the car. Hope you got those in ship-shape form.

[@dannygeouge8459]

it's the little things that make a ride a air kewled ride!

[@VWJawbreaker]

Good tip Pete, many people don’t think of that!

[@fromthebeginningofvankind28]

good thinkin my friend Pete! You are a thinker for sure! :) nobody needs to be draggin on those pesky speed bumps and definatly nobody needs the aftermath of dealing with a mushroomed end. till next time

[@NTNGMAN]

Great tech advice, thanks you.

[@freddaniali]

I remember when my adjuster nailed the train tracks back in the 90s! It bent my beam! Great recommendation Pete!

[@AirkewldVWs]

Happy Holidays Fred!

[@freddaniali]

@@AirkewldVWs Thanks Pete! Merry Xmas!!!

[@manuelzavala1969]

Sweet.No more trying to Pole Vault obstacles on the road.

[@fairlaneclubofamerica6498]

The details that matter. Well done.

[@Mr69volks]

I have your adjusters on my 69 bug found out the hard way I needed to trim that bolt .

[@philrazzi7782]

2:17 Tongue came right out. lMAO

[@nikittoo1]

Hello I removed the lowered bolt for better clearance but it’s still to low approximately 2” from the ground and I can’t seem to find that bolt I probably lost it, my question is can I still raise it by using the top bolt only? Thank you

[@AirkewldVWs]

www.airkewld.com/article-a/366.htm No you can't but you can pick up another bolt here.

[@nikittoo1]

Thank you

[@MF-rn5os]

simple thing to do so someone can prevent a lot of damage.

[@hardbodymini]

How can you have the alignment properly done when there is no weight on that chassis. As soon as you put the body and interior on that chassis it is going to squat so your Wheels will camper in and your alignment will be way off

[@AirkewldVWs]

This is for clients who are putting the beam in their car, not a chassis, but it is easier to understand and view with the body off.

[@hardbodymini]

@AirkewldVWs gotcha

[@charliemessenger6537]

Simple mod that can save a ton of headaches later. Ah the miracle of cut off discs. You're probably too young, whipper snapper but back in my early days the cut off disc hadn't been invented yet so you either used a hack saw or if you were really lazy, you'd use a grinding wheel and just grind the living shit out of that allen stud until it was glowing red. Ah, high school memories.

[@eduardorodriguez3262]

🌟🌟🌟🌟🌟 need I say more👍

[@halforcclan5769]

Rule 32.