How to Lower your VW Bug For FREE!!

How to Lower your VW Bug or Bus For FREE!!
This is a cool trick to lowering your Volkswagen for free!
You can nail the ride height easily on your Beetle, Split Window Van, Ghia or anything with a VW beam.
Comment "I'm in" below if you want to win this beam.( Make Sure you are a Subscriber)
We will pick the winner after we do the follow up video.
Keep in mind that you may need new shocks depending on how low you go.
Check out the VW Life Channel! / @vwlifevw
Don't Forget To Subscribe! / robstapleton
The gear we use:
(amazon affiliate)
Sony a6400 - amzn.to/2YM7D09
Small Rig Cage - amzn.to/2G6KChg
Canon 800d - amzn.to/2JDrrfI
Neewer Lights - amzn.to/2YJXT6N
Light Stands - amzn.to/2XDO4KR
Verizoom Tripod - amzn.to/2S6Imv6
Comica Wirless Mics - amzn.to/2G7cbqR
Shure Headphones - amzn.to/2JzCBSW
GoPro Hero 6 - amzn.to/2JAvj1b
Dji Mavic 2 Zoom - amzn.to/2LLFToF
Dji Smart Controller - amzn.to/2S7OaVi
Polarpro ND filters for drone - amzn.to/2JAg5Jt
Camera Back Pack - amzn.to/2LKtAZS
Drone Bag - amzn.to/2LeHBiX
Lanyard for Drone - amzn.to/2XDBb3t
Stick Light - amzn.to/2xHpd9H
Phone Mount - amzn.to/2XEg1Cy
Dell Laptop - amzn.to/2XE9xn6
DISCLAIMER:
Rob Stapleton is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#aircooled #slammedbus

[@gerarddanet9420]

Excellent Video. Very Informative and detailed. You guys always offer great advice. Keep it up. Always Appreciated.

[@louiestinson8979]

i used a large pipe cutter, no loss of material and super clean already prepped for welding. just make sure to do one complete before cutting the other or the beam can spread. the pipe cutter gave super straight clean cuts. but like you did....in a pinch on a low budget....you do what you gotta do. good job.

[@levishoup3106]

Videos are awesome and a great help thanks for all the work guys

[@Tikicar]

Excellent video, this would be great in my 73 Thing I plan to lower this winter.

[@donfreville8963]

Definitely worth considering now for my 73.

[@benjamincramer7750]

I’m in!! Glad I found your channel when I did! Thanks for the videos and tips

[@edhendrickson1126]

Great vid, picked up a 71’ Standard not to long ago and might just have to do the same to the beam

[@philstratton5192]

Love what you guys are doing!!!

[@chuckbestaround]

Great Video ,really liked how you showed how much to twist by laying it down on paper !!!!

[@ryanlowther6447]

Awesome glad you liked it!

[@alexredard5584]

Great job guys!

[@brentf2116]

Really good video. Looking forward to the next one. I'm in.

[@wagenmaster1]

Clever, and super high quality video. You guys are naturals at this. I don't need a beam though.

[@demonmotorsports99]

Thanks! I tought Rob everything I know about making videos and he totally ignored all that and did this instead....good call!

[@robertingram4562]

Guys, just wanted to say thanks. Answered so many questions, like how to keep things straight.

[@RobStapleton]

Glad we could help! Thanks for watching!

[@Gravity-campers]

Awesome video guys! Subbed!

[@vincegodwin8111]

Thanks. I like your videos. No BS!

[@camarillo861]

I'm am definitely in need one too. I am in!

[@JWClassicVW]

Great Video guys!! Great info all around... great time to narrow that beam as well!!

[@RobStapleton]

Going to narrow it real soon!

[@wadelewis6992]

WoW y’all make that look so easy. Thanks

[@RobStapleton]

It is lol 😀 Thanks for watching!

[@jerrydunbar9841]

Informative ! Could use this on the new project

[@txnewwaver]

Great tips for me to work on for my 66 Vert Ghia

[@deronsweet6728]

Good video always nice to find a way to do it for free.Thanks

[@dansouth9009]

Great video, lovely weld

[@MrWesthamguy10]

This is very informative

[@nousername.4831]

When did my beetle I just removed the bolt, broke the collar free inside the tube from the dimples and drilled a new hole further round for the bolt. No welding required 👍🏼

[@ROYL247]

Awesome vid, keep it up the good work.

[@martinharris5017]

Done this many times! 1/8 inch=1inch drop. I don't even disassemble the beam to do the job. Out of the car and back in less than a couple of hours :) My '68 Beetle runs a 1 and 1/2 inch drop. Just enough to eliminate the stock "nose-up" stance.

[@RobStapleton]

Might be a cool video to show how to do it this way.

[@zacthomas7455]

Very cool 😎 Always nice to learn things 👌🏻

[@RobStapleton]

Thanks Zac!

[@metoo4137]

yay! free beam!! VW life man, nice gesture:)

[@jaytownley72]

I've done it this way a few times. Sadly I don't have a TIG so, MIG everytime. Looks good fellas, keep up the good work. Put me in for the beam too, even though I'm in the UK 😂

[@RobStapleton]

You'll just have to plan a trip to Florida 😁

[@petedelatorre4171]

Nice! that really helped hopefully I made in time I'm in

[@jason_arnold]

Ooh, free beam? I'm in!

[@JMKGarage]

Good to know. Thanks for sharing 🙏

[@SmallDeckEnergy]

Great video guys! Thank you!

[@RobStapleton]

Thanks for watching!

[@VWJawbreaker]

Nice job guys, videos keep getting better!

[@RobStapleton]

Thanks. We're trying to make them better every time.

[@VWJawbreaker]

Rob Stapleton you’re killing it 🤙

[@keithbillings3047]

I’m In. Nice work!

[@jeremymarano4866]

"I'm in" : Great video an help, thanks for your advice and time.

[@jjw3923]

Thank

[@sebastiengeerens5158]

Nice work, that would be great for my Karmann Ghia project.

[@RobStapleton]

Would love to get a Ghia in the shop!

[@dirtytrucker08]

Good video guys, thanks for the info.

[@RobStapleton]

Thanks Chris!

[@jonelwood880]

You can use hose clamps to hold the angle iron in place.

[@68westy]

Have a 71 that this would be great to go on.

[@johnkimball4864]

sick work as always

[@RobStapleton]

Thanks

[@S8david]

You guys make awesome content. Ive just started following your channel

[@RobStapleton]

Thanks for following!! Hopefully we'll get some new content out this week.

[@natemurphy4367]

Sweet tip

[@luisliboy2558]

Great tips. Thanks. Hope I win that beam though. Thanks guys!

[@surlycrosscheck1]

Subscribed! Great stuff!

[@peterelder5879]

This is awesome!!!!!

[@carloscuellariii4197]

i need this beam and you know this man........

[@icantintyou]

this may sound crazy but 12 yrs ago i took the center grub screw out and re drilled the hole and turned that whole thing inside the tube and put the screw back in. both top and bottom and got me about 4 in of drop on my 58 panel van.

[@RobStapleton]

That sounds like a real easy way to do it.

[@barneyrebel0123]

This was the very first way to lower your VW Ball Joint or King/Link pin front beam. Way before pulling splines (Dangerous, don't suggest it) then the Sway-A-Way lowering kit that was adjustable raise and lower of 4". Then the Puma Adjusters which were basically the same thing. But, the last 2 kits, you still have to cut and install the adjusters. Same way to make an adjustable raised beam as well. Nice work guys, bringing back a late 60's early 70's way to lower a VW!

[@mykwilwin]

Pulled a leaf in each beam in my 57 oval with success was wondering if anybody tried a ball joint front end

[@techhead11]

I'm in for sure!!!

[@matthewchilders5263]

Love it!

[@abbesire3264]

I subscribed just because of the spray

[@leonfinley9659]

I'm in for sure

[@olegariobaptista7284]

Great video, just one tip, it is much more easy to use a racket pipe cutter, clean and perpendicular cut.

[@demonmotorsports99]

That would work excellent! I dont have one but I think most diy peeps have a grinder so we just showed how to do it with that

[@zimms-world]

Awesome video...great tips

[@RobStapleton]

Hey I just checked out your channel... My first Beetle was a 76!

[@johnwicks4345]

Awesome video

[@4x4loz97]

Just what I was looking for 👍👍👍

[@RobStapleton]

The follow up video is coming real soon!

[@4x4loz97]

Rob Stapleton how soon ???

[@RobStapleton]

We've already shot the video so it should be in a little over a week.

[@JewelryRvMe]

You two are pretty funny 😎 much enjoyed 😃

[@RobStapleton]

Thank you! We try to have fun with it!

[@troymarbut9792]

Cool! I'm in!

[@martyhoffman8246]

Great video!

[@RobStapleton]

Thanks Marty.

[@BIGG-MATT]

This beam would work great in my bug I'm in!

[@caseymasterson78]

You guys rock!! Beam giveaway!!

[@SSTools1]

What a great video!! Wish I found it earlier so I could’ve tried to win.

[@RobStapleton]

Thanks Shawn! We have some more giveaways coming up real soon so keep checking back on our channel.

[@daneskylar]

Let's do it!

[@SladesVWBeetle]

Good Video!!!

[@shubhamsunner3459]

Thank sir

[@RobStapleton]

Thanks for watching!

[@cynzhero62]

My 69 linton spoiler needs a beam as mine rusted out and is not safe to drive and im in minnesota and not any doners left way up here. ty and gl to all!

[@RobStapleton]

I sure hope you win it! Sounds like you really need it.

[@enriquem6142]

Great video! It would be nice to win this beam so I can lower my bug. Looking forward to the second video!

[@RobStapleton]

Hopefully have the second one up in a couple of weeks.

[@dmwgreywolf1123]

Cool!

[@gustavorodriguez6997]

Hot dog! Thats cool!

[@TorquePowerVideo]

Count me in!

[@claudiodelagarza8579]

Awesome video, would be great to get beam

[@saltlifebuggin]

Awesome intro 😂

[@fatmike1_491]

Im down i just bought me a 77 and need it lowered

[@jgizin]

I know an easier way to lower the front end. Let air out of tires. No tools needed. It's truly free. Warning: Results may vary. In all seriousness, nice video well explained.

[@WolfHausMotorwerks]

good stuff!

[@RobStapleton]

Thanks...Looks like you have some cool stuff going on over on your channel!

[@WolfHausMotorwerks]

@@RobStapleton Hey thanks man, I really appreciate it!

[@joeellerington]

I’m in!

[@MrMufflerbearing]

I’m in.

[@santosnunez9009]

I’m in

[@Volkswagenplanet]

Great channel. I just subscribed. I have a few videos to catch up on. - KEEP DUBBING -

[@55575]

Nice work Could be done with stick? Maybe a 7018? Cheers from Brazil

[@RobStapleton]

I can be done with stick but it would be more clean up to make it look nice.

[@55575]

@@RobStapleton Thank you for your answer!

[@brianhenry9564]

I'm in!!!!!

[@bux49]

How about a hose clamp to hold the angle iron ?

[@RobStapleton]

That's not a bad idea.

[@marktyree598]

I'm in

[@DuckmanCycles]

Duckman in the garage! Awesome video guys!

[@RobStapleton]

Thanks Duckman!

[@DuckmanCycles]

@@RobStapleton Thanks for the great video! Looking forward to seeing more of these!

[@VWJawbreaker]

DuckmanCycles and VW Garage that #MFDM is everywhere! 🙄😂

[@DuckmanCycles]

@@VWJawbreaker Yeah that dude gets around.... don't shake hands with him... EVER

[@VWJawbreaker]

DuckmanCycles and VW Garage too late 😂

[@VWRICH23]

Beeaammmmm.. Im in

[@designanddestroy]

damn! free beam!? need this for my type 3 rhd!

[@designanddestroy]

I'm in!

[@walidbazzi3478]

your the best , Im not good in math , if i want to lower 4 inches how much should I turn the tubes? half inch???

[@RobStapleton]

I would just weld in adjusters so you can change it if it's wrong.

[@jackaloopt]

Pretty easy. Whata call it?

[@c10etc]

When you say 3/20 is that mm? Awesome video!

[@RobStapleton]

Can you give me the time stamp to what part your talkin about?

[@c10etc]

@@RobStapleton at 5:15 how much do you turn the torsion center you cut out, turn and weld back in. How wide is that gap you drew?

[@RobStapleton]

@@c10etc If you go to around 7:50 it shows how we twisted the tube.

[@jessecrossley1281]

Beam me up, Ryan!

[@flounderflop1]

Nice video this is hard to come by on youtube

[@RobStapleton]

Thanks Ryan!

[@dougessany4830]

I might of missed the explanation but do you cut and weld just the upper torsion center or do you repeat the steps for the bottom torsion center as well? Thanks!

[@RobStapleton]

Yes you have to do both.. Just make sure you do one at a time... it will keep everything lined up.

[@KrazyAdventuresof626]

“Free” .... is I just need to buy a welder and some classes lol

[@JMKGarage]

🤣

[@jessecrossley1281]

"I'm in"

[@mycabinfever]

I have 1972 Baywindow bus and wondering if this process can be done to front beam like you have demonstrated? Also, any idea if I can lower 2-2.5” and run stock wheels/tires without rubbing issue?

[@RobStapleton]

The Baywindow is done basically the same way. Wheels should work but you'll probably have to go with a smaller tire.

[@barryshoup8831]

Nice video not sure if I would trust myself with doing this. Lol

[@RobStapleton]

Just find an old beam to practice on.👍

[@barryshoup8831]

@@RobStapleton I will give it a shot.

[@walidbazzi3478]

will this method work for a late bay Bus 1977?

[@RobStapleton]

Yes, you just need to cut off the center pin bracket for the steering first and then weld it back on after you're done.

[@dalestogdon5931]

Use a center punch ding dong Make ure marks. And use a pipe cutter,, better tell people not 2 cut thru torson bars.

[@dwalker399]

Back in the late 60s early 70s building street buggies that's what we used to cut them. And if you dldn't want to cut the beam. You could remove and cut some torsion leaves off the spring stack. And then tack weld small sections of the cut spring on the inner mount point and the outer mounting points to complete the shape of the stack. That's how we did it old school.

[@tjaysughrue]

I’m in? Awesome video and good info. 👍

[@tjaysughrue]

Oh and nice work.

[@RobStapleton]

Thanks Tjay! Nice Baja!