Music Reactive LED Strip Make Very Easy

[@PiratCarribean]

Only the red of the rgb led's are glowing, because they require less power than green and blue led's.

[@pkpandastore6235]

Be practical bro. The more sound transistor gets. The more gate it opens.

[@BondanHeru]

Made 3 schematic with different transistor, maybe 33k, 56k, 82k every single rgb contact

[@ronnellcagadas9841]

@@BondanHeru can i see your diagram sir?

[@FreeCircuitLab]

We have to amplify the power...

[@robodock23]

You have no way to bias the circuit. The music would have to be so loud it would damage your hearing. And that mic is passing 12 volts. It’s not at all designed for the application your using it for

[@LNMBEATS]

hes probably doing what im running.. my audio reactive leds simply with a seperate amplifier board directly on my strip and since this amp doesnt output over 12v im fine its just not as bright and i have to play my secondary audio output on full to see movement XD thats why im here cuz i want to make my own module but these videos are a fcking scam each time..

[@hafizuddin9404]

can i ask something..if we change mic with diode mic can or not????

[@yadavgopal2854]

Mic can be found on which simulation software

[@detectiveconan955]

Is this need the battery ?

[@JodBronson]

What if we hook it direct to speakers? Would that make better glowing?

[@JodBronson]

@S A - Oh ok :/ Thankx!

[@gamingchaby1888]

Can you name the items you used

[@samuelmf]

It's possible use 3.5mm stereo jack to connect to any music device?

[@R1D9M8B4]

Can I do this with a Tri Color LED? With a common anode? And if I do... will I need a Resistor for the red color since it gas a forward voltage of 2v? And both Green and Blue are at 3v... So will I get the same effect if I have a power supply of a button cell battery of 3v? Or will I have to get a 12v battery? I want to keep this thing small and this device seems to be a really good application.

[@lepayen]

Tri color LEDs have a circuit built in that causes them to change colors. That would only work for the first color in the series, which is always red. What you're talking about is not a "common anode". If you look closely at the tri colored LED, there is both a cathode and an anode for each color, just like with the LEDs in the strip in this video. You may be referring to a common ground, which this LED strip also has.

[@retrorocketman6969]

so how long did that mic last with one transistor and 12 volts. Also, is there a method to use that eliminates the microphone being held a 1/8 inch from the speaker. I really need my hand free for my beer. I still might try it out if its safe though... Nice video!!

[@SamsungGalaxy-bv6mu]

What happens if i solder a RCA jack instead of the Microphone to this construction and plug it into an output socket of my Hi-Fi amplifier? Will the resistor and the transistor be the right ones? I also want to use a white RGB strip.

[@SonariNeiracchen]

Mic needs less resistance..?

[@hemanathr2792]

Can I use it for 12V led

[@mjyanimations1062]

Hemanath R it is 12v

[@Tharun519]

Volume go up, bright going up?

[@matheusmf4135]

Some suggestions -Use a p2 jack instead of microphone or -Use a audio amplifier, like lm386 -If using transistor, it would be better biaising it -Or try with one more transistor

[@LittleStarRhyme]

I dont know how this works, but i am going to a concert next month ( trying to make a mask which reacts to how the dj is playing) , and i think it would be great if you would tell me where to put the resistors and amplifiers. If i make the exact copy of this tutorial. And one last thing where are the batteries?

[@andretroll3853]

YOU TUBE - Robotizado con CD4017 , NE555 Pilotos Andre

[@proghostzgamecreed6555]

Are they neopixel led s???

[@dejandijanic]

No

[@jinxstall4178]

can i use 10Kohm for 9V rated strip?

[@yoshiyusof853]

you can try it.. my teory, it may work but maybe the LED a bit dimmer.. sure go try it..

[@zolution2839]

a transistor of more power is needed, (so that it is illuminated as it should be) each sector of 3 leds consumes 50 milliamps and that transistor at most will reach 300 milliamps, friend dedicate to something else, you are stoned.

[@inderjeetkumar2395]

very nice and good luck

[@tomekfil1424]

with bc556/bc546 this works?

[@korpus8481]

That's how it should work Music Reactive LED Strip / VU-Meter: kzbin.info/www/bejne/a36yg3WBl8t8gtU

[@emersonsawiak6151]

Great video, I did and it worked, but the response of the LEDs is triggered slowly and when the volume of the audio is very high, I want to know if there is how to modify the sensitivity so that the LEDs on have a fast and strong response.

[@micx8280]

your using RGB strip, but your only doing red... EPIC FAIL

[@yimmygutierrez9258]

Yo lo hize y el micrófono lo puse directo a la bazuca.. funciona perfecto

[@elrincondelvago5038]

Y NO SE QUEMAN LOS LED BRO?

[@r.svlogcity7860]

Please tell how to give power supply

[@luisfernandoveramendoza3666]

Está muy bueno pero falta más potencia a la tira LED

[@ydi.7]

you can use double transistor and boost it

[@OZLEDCAR]

Easy solder ! Wht´s tip do you use ? Solda fácil. Qual tipo voce usa ?

[@pedrodossantos5890]

OZLEDCAR tip significa ponta

[@bestamerica]

' that is good LED project... how about leave LED light on without sound

[@edelbertoramos5908]

A que voltaje se alimenta???

[@ankitpapneja3291]

Where can i get that bce thing and a 68k resistor

[@AngeldeLasTeclas]

You are a genius, that project would look very nice applied in the car. Regards ;)

[@dudefromnorth9410]

It sucks. Takes in the wheel noice. Better to just power led stripes from subwoofer or investing to color organ.

[@JodBronson]

@@dudefromnorth9410 - What if we hook it direct to speakers?

[@dudefromnorth9410]

@@JodBronson singal to speaker is 12v constantly i think. So the leds will be on all the time or flash randomly, im not sure. But i have not heard anyone doing it & i have heard it will no work. & if you put 2 many leds to speaker wire it might damage the headunit if i remember correctly.

[@JodBronson]

@@dudefromnorth9410 - Ah ok, thanks!

[@rcthomas7090]

Whats the point of having a mic? You HAVE TO HAVE the tunes sitting ON THE MIC for it to BARELY work. Try again man.

[@histonite8172]

Its just a fun and basic project for him to try so dont hate dude

[@homerodejesus2646]

É possível substituir o resistor por algum outro valor sem perder a qualidade? Caso sim, quais sugere?

[@leandrordrummer3463]

Eu substitui por um de 47k e ficou top... quanto menor for o valor do resistor, mais sensibilidade vai ter, testei com 22k mas o led ficou meio aceso... coloquei mais de 60k e ficou fraco, com 47k ficou ideal.

[@djdayvi961]

Nice project and music!

[@sajansharma5230]

Sir,Make full 240 Voltes RGB led strip music relative and with him work RGB effect's ( i requested you sir, please immediately upload make the video)

[@rumahhafidzahbekasi1354]

Grammar has left the chat

[@slipknotfan2217]

@@rumahhafidzahbekasi1354 India has joined the chat

[@virtualgamestrujilloperu6468]

Que chido bro y no tendrás un video donde pueda poner una tira led de 1 color conectado a un trazo que al golpearlo prenda ese led. Lo que pasa es que quiero ponerle a mi batería eléctrica un led mas un trazo debajo de los bombos y platillos y al golpear prenda un color.

[@shwetankjain1718]

Why 68k ohms?

[@OZLEDCAR]

Amigo, seu ferro de solda é muito bom ? Vende no Aliexpress ?

[@kpranav513]

You can simply connect the terminals of LED with the terminals of the speaker. T h e LED will sync with the music from the speaker because LED and the speaker work at same 12 volts

[@tuffgong3248]

You Will damage ur speaker

[@FerxOfficial]

Thats not how it works lol

[@anuragcreations7997]

Kids do that lol 🤣

[@kpranav513]

@@anuragcreations7997 kids also make use of their brain,as an adult have you stopped using yours?

[@anuragcreations7997]

@@kpranav513 you stopped yours 🥱 bcz it will damage the speaker & the circuit

[@Manishphotography26]

Mic not sensitive

[@rafaelalan7347]

Parabens bem esplicada e vao so 3 pecas aonde posso conseguir esse componentes?

[@jonathansilvavareiro2031]

Colega eu achei tudo em sucatas eletrônicas, mas vc pode comprar em lojas eletrônicas. Eu vou tentar fazer mas com lampada de scanner pra ver se funciona. Achei bem simples esse projeto.

[@dj-r-avenger6881]

Men como se llama El material que usaste para aser eso. Para comprarlo y aserlo.

[@jairoescobar5003]

DJ-R-ROMANTICK ahí te dice en el video

[@betotarango4356]

Material por favor para conseguirlo

[@Nyaber123]

Why not change the mic into a audio cable😑

[@rosapell82]

mic black dot-Ve is?

[@aklimakhatoon8290]

In mic which is +

[@xXWesley2010Xx]

thank you this is really helpful

[@_Fla5h_]

It is better to take only the red LED tape

[@fenneckofox770yt]

también se podría remplazar el mic y poner una salida directa a un amplificador u seria barra audio rítmica

[@nayankumarmaityvlog]

Bora bala bana ha kasa banau .. o bala vedio bana dao

[@BondanHeru]

Working, but why affect from air flow, not volume beat

[@lancewhitaker2033]

Lacross agility ladder training

[@nonameemanon9252]

Esto sirve para ponérselo a una bocina ke tengo ke es muy grande????? Conteste me porfavor????

[@egiferdi]

just replace that resistor with 22k, problem solved

[@nicooktubre9346]

Se puede hacer pero con leds rgb (no tira)

[@sumanjit100]

It was a rgb strip....but it was showing only red colour why???

[@chrislewis2262]

Sumanjit Rajbongshi the red led don't require a large voltage to light. The blue and green require a higher voltage to light up

[@sumanjit100]

@@chrislewis2262 oh i didnt knw that thanks

[@RahulKumar-jc4bn]

Home theatre Main k se lagaye kuch asa tip banaye

[@dustinjohnson4225]

You need to calm down with that music.

[@HifiModernTechno]

Hey bro, How you make your intro? plz help me...as youtuber

[@satheshpeter1526]

There is intro maker in play store

[@HifiModernTechno]

@@satheshpeter1526 thanks, can you send me link

[@satheshpeter1526]

Sub me

[@satheshpeter1526]

Search in play store

[@yimmygutierrez9258]

Consulta , hize este mismo y me resultó lo hize para el auto .. La pregunta es la siguiente , cómo puedo darle más intensidad a a luz?

[@siysko]

Baja le la resistencia que le pusiste. El.mejor resultado lo puedes obtener colocando una resistencia variable. También depende el voltaje con el que alimentas el circuito.

[@tigreacosta9647]

Ese transistor es fácil d obtener ?

[@adrianoc.bcast.b642]

Olá boa noite Muito bom, realmente o video cumpre o que promete fiz e funcionou.pena que os leds ficam acesos sem ligar o som acho que algo saiu errado. mas quando ligo o som eles realmente piscam no ritmo da música .obrigado pela dica

[@canalfacavocemesmo5800]

Deve ser pô causa do resistor.

[@johnyio4225]

Add a resistor to an electrical ground, or the positive part of a battery. The emf is causing the problem.

[@krishnakumarballia4081]

Name of middle resistance

[@cartoonsmania8118]

simple but good idea

[@titovera7836]

No se a de quemar el micrófono???

[@technicalmind1199]

Nice nice

[@hazlotumismo752]

Que pasa si no le pongo la resistencia

[@ismaelmeza1800]

Ese circuito trabaja 12 v y cuanto le.se le puede poner a se circuito

[@abhisekhmondal6268]

Not working properly

[@imbillionaire4741]

why just red light?

[@LOpizzaiuolo]

Easy? 😁

[@ashalinaasheeqa8711]

TR y pake bekas lampu neon cagak bisa gak ya om?

[@biscicantik4848]

Bisa sih biasanya

[@manuellngarcia6545]

Como se yama el material amigo

[@amjadshahzad355]

Sir mjhe 1 inverter ka pcb design bna dein jo dc 12 volt se ac 25+0+25 volt output de,,5 ampere se 15 ampere ki battery pr chlana he,,

[@burakrasimserttas6778]

Kardeş micrafon yerine şak yapsaydın tam olurdu

[@jesusjuarez5972]

cual es el valor de la resistencia por que no me funciono

[@naron23vrn]

На каждый цвет надо по конденсатор добавить

[@aleksandrzakutnyy4450]

а еще можно по каждому каналу rgb устроить свой фильтр с тразистором и подобрать сопротивления

[@cicerobarros3203]

Great project. Perfect!

[@RAF-nt7kf]

👍👍👍

[@duvanandres8135]

Como se llama el transistor? Por fa

[@juanjavieralcorezapoppe3722]

Transistor BC547. En el mismo video puso los nombres de los materiales que usó. De nada !

[@percyhuillcas1658]

Cuanto tiempo de vida tiene se lo pongo a un moto taxi

[@FiliRedemptor]

Kurang penguatan daya nya, mic nya harus peka

[@toninhonogueira8707]

Sensibilidade 0,001

[@kang_freestyle7119]

Bg kalo pake trs 2611b bisa gk bg

[@krisraps]

All The FAILS ayers, Make Something Like That Your Own Better If You Want To Do Something and then talk shit. GOOD Project..

[@PavelK77]

Thanks!

[@ManojSingh-dy7qt]

not working

[@tivath6005]

_Nice_Video_

[@babalusah8651]

Dj

[@mohdjimmyyussridatoyusof]

Mengapa lampu itu malas untuk menyala?

[@juliocesarbonilla8217]

sos un master!

[@doblee9077]

Eres un genio

[@thetruemystic_]

Oh the background music is shite and it’s too loud

[@marsedie05]

Horrible tu proyecto . Mejoralo

[@manoeldamasceno4413]

Manoel messias

[@aridamanss1989]

not working proprly

[@victorroldan5303]

Bc547 cbe , c A LED b A 68k micrófono e