S830 eBike LCD Display Complete Settings Explained (P01-P16) / ADO D30C / DECE 300 eBike

[@rcppop3090]

Oh my god thank you for this video! The instructions leave a lot more to be desired as far as an explanation is concerned!

[@TechTronic9000]

Glad it was helpful!

[@lovestone1963]

oh, i think i found it!! Cheers!

[@TechTronic9000]

Yes you did! :)

[@festertag]

Mine shows 000 when i try to get this menu

[@diegolinan5446]

Thank you! Do you know if this ADO D30 can be connected to ADO APP?

[@TechTronic9000]

No, this model doesn't have a smart LCD display so no BT connectivity and no APP control.

[@JayrB]

My ebike is Movelo Electric Bike 36V 10AH 350W, the display only has settings P01, P02, ODO. Is there any other way to get all of the other settings? Help will greatly be appreciated. Please and thank you.

[@TJ_Cow]

Having the same problem except just p01 and p02 Figured out a solution?

[@JHOFF111]

So I've never really got a straight answer on how to set the wheel diameter setting, I have 26x4 and 20x4 e-bikes, do you set them exactly on the wheel size or a little bit more for the tire thickness? I've never been able to get a straight answer any help would be great

[@TechTronic9000]

I usually go with the wheel size, but it's not very accurate. On some bike 26" fat tire = 29" setting. You can use the phone with GPS and tune the settings until GPS shows the same as with display.

[@Eron747]

Amazing ideia.

[@mihaicojocaru4307]

Do you know on model duotts s26 what need to be on P13 ? 5,8 or 12 ?

[@TechTronic9000]

Sorry but I'm not familiar with the "duotts s26".

[@bicycle_in_Bulgaria]

Hello, is it possible to restore all settings to the initial appearance?

[@TechTronic9000]

No, you need to program each one as it should be.

[@bicycle_in_Bulgaria]

@@TechTronic9000 Okay, thank you

[@bicycle_in_Bulgaria]

​@@TechTronic9000 Hello, I mostly drive on roads, how do I set it up?

[@TechTronic9000]

Just let it as it came from ADO

[@bicycle_in_Bulgaria]

@@TechTronic9000 I don't know how it comes because I did it the same as in the video

[@bynaxa4532]

how can i connect with my ADO D30C in the Ado app how can i activate bluetooth

[@TechTronic9000]

The D30C doesn't have BT so you can not connect to the ADO APP.

[@ernestascepi]

Hi sir, maybe you know what's happened to my ado bike. The problem was appeared then I changed my rear wheel tire. 1 paddling assist works at it should second one is at 25kph and 3 one is not working at all. Do you know what's the problem is? Maybe I changed something? In controller?

[@Yes-sw8gh]

Check wires. Might be connection issue. 3 speed switch may be loose.

[@andarthome142]

It's the same as my ado a20f+ settings (i have now for almost 3 years), no changes here almost 3 years later, and no mobil app to set the setting, i think ado is missing something! the same controller?

[@TechTronic9000]

For the A20 I have made this video kzbin.info/www/bejne/noTFda2retmkqKs As for mobile app, that is available only on the AIR models which use different controllers, display, etc.

[@frankcurtis5111]

When I press the up and down only a C shows up with 4 zeros at the bottom

[@TechTronic9000]

could be locked and asks for password.

[@shayaandhamani70]

Try 1314

[@edwinlaw7353]

try to enter 1111 instead of 0000

[@dananderson3930]

I tried this video, but when I try it it only has p001 p002 p003 p004 and then it goes back to p001. It's like the others don't even exist

[@Юрій-ь5й]

​@@dananderson3930Рад Вас приветствовать, а у меня только Р-1, 2, 3 и 3 не начто не реагирует 😢

[@JackMcCabeFL-USA]

What about P07?

[@TechTronic9000]

P07 is related to the motor type and how it reads the speed (rotation) according to the number of magnetic poles and gear multiplications. Usually newer bikes with geared hub need to be set to 1 to show speed properly.