Tecware - Flatline Chassis (The Overview)

[@stretchybwoy]

I was waiting for a good case that was a decent price for my son and this is it, thank you

[@KleoYan]

Hi Lee Stroud, welcome back and you are most welcome. I am glad you find this video useful.

[@alron20]

I may be late checking this tecware flatline but thank you for responding to the comments. I found my questions and you were able to answer them. No need to ask again. thanks, man!

[@KleoYan]

Hello mawoonn, welcome to my channel. Glad that you have your answers and you are most welcome 😉. All the very best with your build.

[@nah370]

I have this case for almost a year now. Its actually fine. My problem is I forgot to how to open the panel. I tried it before (just to clean the fans) but its really hard. Thanks for this vid I will try that method.

[@KleoYan]

Hi Nahh, welcome to my channel. I am glad this content did aid you. Thank you for your feedback and all the very best 😉

[@carrotshake2195]

I was looking for reviews of this pc case last month and found none. Thank you for this!

[@KleoYan]

Hello carrotshake, welcome to my channel, glad this video did aid you in someways. all the best with your build too 👍

[@carrotshake2195]

@@KleoYan Thanks! I have one question though. What is the mesh made of?

[@KleoYan]

@@carrotshake2195 the mesh at the front is metal. The fan dust filters (bottom and top) are nylon.

[@carrotshake2195]

@@KleoYan thank you so much. More power to you and your channel

[@KleoYan]

@@carrotshake2195 you are most welcome and thank you for your kind words 😊

[@Private-lw1td]

Very thorough review. Nicely done. Subscribed!

[@KleoYan]

Hi Private0303, welcome to my channel and thank you for your valuable feedback. All the best with your build too. 😉

[@Viren21]

thanks im actually searching for reviews of the case since its really popular budget case here in PH that im actually making a deciding to choose along with DLM21 and M100a

[@KleoYan]

Hi Kishu Yaena, welcome to my channel. I am glad you found this case content. I wish you all the very best in your build too. 😉

[@nvadito7579]

Hey, my motherboard's only got one 4-pin fan connector. If I use a splitter to hook up multiple fans to that one connector, can I still control the speed of all four? And are motherboards built to handle a few fans on one connector?

[@KleoYan]

Hi Nvadito, welcome to my channel. It will be best if you know the ampere that each fan is drawing and to check against your motherboard manual on the fan header. lets say the fans are each drawing 0.15a and if you have 4 fans which total up drawing 0.6a, check your motherboard manual on the fan header, if lets say the SYS_FAN is rated at 2A, then it should not be an issue.

[@max-lee]

the front panel looks better than the montech air 100 lite. the holes looks closer together and bigger, thus better airflow.

[@KleoYan]

Oops I miss out on this comment. Pardon me max. You are not wrong about this. The only issue I have with this case is the front cover. It’s difficult to pull out.

[@romejek18]

I just found out about your channel recently, do you have a review for tecware edge m2 or tecware neo m2?

[@KleoYan]

Hi romejek, welcome to my channel. Do pardon me and sorry, I do not have those for review.

[@romejek18]

@@KleoYan ok, i just want to ask if there will no clearance issue on top mount radiator vs ram in each case. Anyways thank you for the reply.

[@KleoYan]

@@romejek18 I see, so sorry about that, not able to answer your question. Hope you will find your answers within youtube. thank you to have visited.

[@narrativeninja]

no hdd slot at bottom since thats screw hole for case fan instead

[@KleoYan]

Hello AZ Gusto Net, welcome to my channel, you are correct, no HDD slot holes, there are only fan holes.

[@paperclip9558]

Thanks a lot for this video, it's really helpful. I'm waiting for mine to arrive, only its the mk2 version, whichprobably the successor of this version? Idk. From the picture alone, they looks pretty much the same.

[@KleoYan]

Hi paperclip95, welcome to my channel. I am unsure how the mk2 is build, kinldy take this content just a brief reference. There might be improvement made on the mk2 version. Nevertheless, thank you for your feedback and all the very best with your build too. 😉

[@allengonzalez7693]

Can you do a review for darkflash c285mp matx case. Thank you

[@KleoYan]

Hi Allen Gonzalez, welcome to my channel. I see what I can do, will write in a request to darkflash, no promises though. Thank you!

[@kusadge]

Wondering if it can fit thicker fans at the front, like 27mm or 30mm..

[@KleoYan]

Hi meanderingNerk, welcome to my channel for 27mm or 30mm fans, it will fit if you only attach fans inside of the case.

[@ghersenn1843]

Hello. Can I ask.? Can the Sapphire Pure RX 7800 XT fit in this case? I have the same case and looking forward to upgrade my current GPU which is an RX 6600.

[@KleoYan]

@@ghersenn1843 hi and welcome to my channel. This case able to cater for a GPU length of 330mm. If your card is around this range. It will fit. Kindly check your GPU length.

[@simphoniaubec]

hi great vid! i'm new to pc building, so those type of fans the speed cant be controlled am i right?

[@KleoYan]

Hello Ben, welcome to my channel. if you are talking about the case fans that are provided, you will need to set it to DC Mode and to set the profile provided in your UEFI. watch this and you will understand further. kzbin.info/www/bejne/g3SwnKWHrKuhga8

[@hadoukenocx4746]

Hello, Yan why did you Remove the L-Connect 3 Feature Video With the Update 1.1.9?

[@KleoYan]

HI Hadouken OCX, welcome to my channel as I will be doing up a proper video for that. as that video is without voice. thank you!

[@hadoukenocx4746]

@@KleoYan 👍

[@rizchjedperez3271]

i want a pc to be built on the right side or tempered glass on the right side and they have suggested it on this is it really viable?

[@KleoYan]

hi Rizch Jed Perez, welcome to my channel. I do not think there is such a variant on this model.

[@freddyzhounyc]

Hi, is there any way to use Lian Li SL120 fans on a Corsair H150i elite capellix aio? If yes, how would I connect the wires to my motherboard/controller?

[@KleoYan]

Hi Freddy Zhou. welcome to my channel. pardon me, this I will suggest you to approach lian li reddit channel and to asked as I have no knowledge to Capellix aio. do pardon me.. www.reddit.com/r/lianli/

[@marcjesson6703]

Hi, if I'm going to use the included fans on the case, how will I connect them all to my psu without a fan hub? Thank you!

[@KleoYan]

Hi Marc Jesson, welcome to my channel, you can daisy chain the fans via the 4pin molex and contect to your PSU 4pin molex.. those are the big 4pin molex (www.lifewire.com/molex-4-pin-peripheral-power-connector-pinout-2624582) but you need to know you can't control the fans at all when you do that. it will all run in full speed.

[@marcjesson6703]

@@KleoYan hi, thankyou for the fast reply. And just to clarify, after daisy chaining the fans, you don't need to connect it to the motherboard right? As I will use gammaxx 400 ex as the cooler and will occupy the cpu fan and chassis fan pins on the motherboard. Sorry I'm kinda new to pc building. Thank you and you've earned a new subscriber!

[@KleoYan]

@@marcjesson6703 hi, yup for case fans you dont need to plug to your motherboard fan header as you can't use them anyway. so leave those motherboard fan headers for your aircooler fans. all the best in your build too.

[@device9993]

Very informative vid. It comes with 3 fans right, where do you plug all the fans? Does it come with a fan hub?

[@KleoYan]

Hi device, welcome to my channel, the fans I am using are the Arctic Bionix F140 (ampere of each 0.20a www.arctic.de/en/BioniX-F140/ACFAN00096A) and Arctic Bionix F120 (ampere of each 0.20a - www.arctic.de/en/BioniX-F120/ACFAN00093A) They have build in daisy chain cable which allots me to group them into twos and the be plug to the motherboard directly. On the MSI B550m mortar motherboard, each fan header are rated at 2A. The following is how I plug these fans. No fan hub needed, directly to motherboard respective fan headers CPU_FAN1 - CPU Air Cooler fan SYS_FAN1 - Top two fans (2 x Arctic Bionix F140) SYS_FAN2 - Front two fans (2 x Arctic Bionix F140) SYS_FAN3- Rear fan. (1 x Arctic Bionix F120)

[@device9993]

@@KleoYan Thanks for answering. Love your vids, really in-depth and informative!

[@KleoYan]

@@device9993 hi ya, you are most welcome, all the best with your build ^-^v

[@potatoesrsogood]

Hi kleo , for the fans were they pre-installed? Plus correct me if I'm wrong , you can daisy chain the fans and connect directly to the PSU correct? Or must u connect to the motherboard?

[@KleoYan]

Hello Abdul Afiq, welcome to my channel. Yes it does come with pre-installed fans and they can be daisy chained and plug to Your psu old 4pin molex directly.

[@potatoesrsogood]

@@KleoYan Thank you!

[@KleoYan]

@@potatoesrsogood you are most welcome.

[@Jjodoql]

Why here in PH they only come with 3x120 fans? Weird.

[@KleoYan]

Hello tengenemoco, welcome to my channel. This I am not too sure. You might want to check with tecware.

[@Jjodoql]

@@KleoYan how much this case in SGD?

[@KleoYan]

@@JjodoqlSingapore no longer carry this case but back then was at SGD$55 to $60.

[@shrink4693]

Mine came with 4, from dynaquest

[@jun4167]

Are the Hinge bolted directly to the glass or the glass inside a frame? If so. Is it the frame that is in direct contact with the case or is the glass in direct contact with the case? Thanks

[@KleoYan]

Hi Jun, welcome to my channel. the Hinge are glued to the glass not bolted. As for the metal frame on the tempered glass. it's only at the front and at the rear where the hinge are at.

[@jun4167]

@@KleoYan do you have a recommendation where the glass inside a frame? So the glass just sits safely inside a frame. so the chance it's breaking will reduce. Thanks for your video btw

[@KleoYan]

@@jun4167 for integriy of the glass, it's best to have a metal frame holding it. This will prevent accident like having the glass touch a tile floor. I have experience that numerous of times, thats why I avoid tempered glass without a metal frame holding the glass.

[@jun4167]

@@KleoYan that's my question is, do you have any recommendations case Which fulfills these condition?

[@KleoYan]

@@jun4167 hmm.. the only ones I can think off is the Lancool II Mesh. it greatly depends on your budget. Most cases are put and out and not swivel these days.

[@Follower_Of_The_Onions]

Nice brother hahaha. I had to replace my old full tower tecware alpha as it is too huge. I like the this case alot! Thank for the preview

[@KleoYan]

@@Follower_Of_The_Onions hi welcome to my channel and I am glad you like this content. All the best with your build 😉

[@jomarechua8990]

how about the cable management space in the back it is good?

[@KleoYan]

Hello jomare chua, welcome to my channel. Yup it’s enough to hide cable nicely. Maybe this will give you a better picture kzbin.info/www/bejne/m3SoaHd7gJtgr7c

[@JJ-tj6cg]

Finally found a review. Can a sfx psu fit on this?

[@KleoYan]

Hello JJ, welcome to my channel. So long your sfx cpu has a bracket to be mounted on a atx psu housing. Yes you can fit a sfx psu.

[@NekoCattoo]

Sir may i ask if ROG strix rtx 3080 would fit inside of this case?

[@KleoYan]

Hi @user-mo7hz6gy5r, welcome to my channel. the ROG 3080 Strix card is at 318mm and the lenght as mentioned here is at 320mm. if you fit this card in. you might have a problem fitting the front fans.

[@compangit1524]

Can you actually place 3 140mm fans? The specs says only 2.

[@KleoYan]

Hi compangit, welcome to my channel, you can't put 3, only 2 x 140mm, be it the front or top.

[@compangit1524]

@@KleoYan Thanks for the reply. I think I need your help on this. I have the same PC case. I already have 2 120mm exhausts at the top, 1 120 mm exhaust at the back, then 3 120mm intakes in the front. I want to add 2 more 120mm intakes at the bottom of the GPU, however my friend says it's just a waste of money since the fans under the GPU have no air to push anyways. He said that the two additional fans will be depending on the air pushed by the front fans and not on the air outside the case. Hence, adding them is not worth the money. Does it hurt to still buy the additional two fans? What are your thoughts about this? Have a nice day.

[@compangit1524]

@@KleoYan How are you able to fully screw in the long screws for the fans under the GPU? I can't seem to be able to screw them further with my screwdriver.

[@KleoYan]

@@compangit1524 remove your fans. screw and thread till the long screws stops, then place the fans in and screw it down. when you doing the screwing.. screw clockwise 2 rounds and anticlockwise by 1 round. repeat till your screws are in position.

[@KleoYan]

@@compangit1524 my final product kzbin.info/www/bejne/m3SoaHd7gJtgr7csi=1j6g9987aLudGAuP

[@smokethatgameb9937]

Hi Kleo :) I hope you are doing well. Nice video by the way 👌

[@KleoYan]

Hi SMOKEtheGame B, welcome back 😊 Am doing good and how about you? How's your PC build getting on? Btw once you have finish your build, do share with me a picture or two. My email is [e-mail]. thank you 👍

[@insultedegg]

what is the exact measurement for the clearance for cable managent sir?

[@KleoYan]

Hello Rommel Ramolete, welcome to my channel. The actual clearance at the cable management side is at 20mm / 2cm

[@insultedegg]

@@KleoYan thank you so much for you quick response. i am looking for a budget chassis with ample space for cable management. i think this is the one. this video helped me a lot. liked and subscribed.

[@KleoYan]

@@insultedegg you are most welcome. All the best with your build 👍

[@KleoYan]

@@insultedegg btw if you want to know more about this case. I have done a build in it kzbin.info/www/bejne/m3SoaHd7gJtgr7c

[@insultedegg]

@@KleoYan Thank you so much aprreciate it

[@mmggyy]

This case or the Tecware Flow M?

[@KleoYan]

Hi Ae Ro, though I do not have the Tecware Flow M, but looking at the structure, I will go fo it as it will have more airflow to the case.

[@lewesshilage697]

Does this case support a top AIO mount?

[@KleoYan]

Hello Lewes Shilage, welcome to my channel. Yes it does but only 240AIO at the top.

[@THEXGAMER01]

When you buy it it comes with fans?

[@KleoYan]

Hello X Gamer, welcome to my channel, yes it does come with 4 3pin non PWM fans.

[@THEXGAMER01]

@@KleoYan oooh thanks for replying!

[@KleoYan]

@@THEXGAMER01 you are most welcome. All the best with your build 👍

[@julynineteen1927]

Hi I am just checking this case for my build. What is the max gpu clearance? I have a chunky gpu 328mm length. Will it fit?

[@KleoYan]

Hi julynineteen, welcome to my channel. the clearance is at 340mm. Your card will fit.

[@julynineteen1927]

@@KleoYan Thanks for the reply! I know the website says 340mm max clearance but I saw a video where someone cant fit their gpu to a case they also advertise with 340mm max gpu clearance. His gpu was I think around 290mm powercolor red devil 6700xt. So now I'm skeptical if it's the same with this case.

[@KleoYan]

@@julynineteen1927 if you place liquid AIO at the ground then the measurements will be of 310mm. As you can see. I able able to fit a 3080 tuf which is within the 320 length.

[@julynineteen1927]

​@@KleoYanwas there still small space when you put the 320mm 3080 tuf or was it already too tight? Because my card is 328mm. Its a msi gaming x trio 6800xt. Thank you for answering!

[@ianjohnjuayang5005]

No dust filter at front cover?

[@KleoYan]

Hello Ian John Juayang, welcome to my channel and nope, it does not have the front fan filter.

[@shinx4366]

@@KleoYan even it doesn't have front dust filter it is good?

[@KleoYan]

@@shinx4366 hi, welcome to my channel. It depends how you see it. For me it just needed regular cleaning will do.

[@shinx4366]

@@KleoYan thankss

[@KleoYan]

@@shinx4366 you are most welcome.

[@shinx4366]

Bro i have questions flatline or montech air 100?

[@KleoYan]

Hi shinx, welcome to my channel and sorry that I miss your question. what question do you have on flatline or montech air?

[@einsleyharriot1294]

@@KleoYan he's asking which is better in your opinion flatline or montech air 100 which I want to know too myself

[@KleoYan]

@@einsleyharriot1294 hi and welcome to my channel. I am more towards the Montech Air 100 Lite. It has a more premium feel, better feature set and of a better structure.

[@einsleyharriot1294]

@@KleoYan thanks I'm going to buy montech air 100 lite now :)

[@KleoYan]

@@einsleyharriot1294 you are most welcome. if you need know more about the montech Air 100 lite. I do have a content for it here. kzbin.info/www/bejne/gYDYiGurps6iqtEsi=OgANEdgib8XIl0Y5

[@wawanbah5568]

Very nice content man.. but I heard the tecware VXM is lit.

[@KleoYan]

Hi Shazwan Dzulkefli, welcome to my channel. for the tecware VXM, lets see if I can request tecware to provide me the case and I will have a look on it. Thank you for your feedback and to have visit my channel 😉

[@ZealousPumpkinTV]

This is basically a montech air 100 except slightly worse lol

[@KleoYan]

Hello Zealous, welcome to my channel. Well let’s just say that each have its own good and bad. Nevertheless thank you for your feedback. I find both cases are ok. But of course my choice will still be the Montech Air 100. As I like the hinge door mechanism and material are slightly better.

[@coffeeyummm]

Goddamn molex fans

[@KleoYan]

Hi Vincent Janggang, welcome to my channel. Yes we all dislike 4 pin big molex connectors, which I believe the newer case will not have. All the best with your build too. 😉