same here, I love anything with a lot of colour. Probably the reason why I have 3 RGB PC's
@BlackWlng983 жыл бұрын
my wife bought me for christmas a fire red opal ring from you, and i must say i love it to this day. you even rushed to make it for her. Thank you. Keep up the great work my friend, i'll wear this ring until the day i die. Unless of course i find another that i love. All your rings are super tempting haha. Thanks again! - Tristan
@christinaposeyHEADINTHECLOUDS Жыл бұрын
I ABSOLUTELY LOVE YOUR CHANNEL!!! I LOVE OS!!!! ❤️
@attitudeadjuster7933 жыл бұрын
Beautiful ring! Just so you know, PETG has a habit of pulling chunks out of the glass bed when it releases. Maybe not an issue with such a small surface area, but it's better to add a layer of adhesive. I use 3DLac but a mixture of PVA glue and water also works.
@haibu_kun_drawing10773 жыл бұрын
Finally a new video!!!!!!!🌟🌟
@tabasdezh3 жыл бұрын
welcome back :)
@HuntersMoon783 жыл бұрын
that ring is gorgeous
@Krltplps3 жыл бұрын
oh wow, attaching the wire to (electrical tape?) instead of the ring itself is a game changer!
@10papermaker3 жыл бұрын
That one is very beautiful!
@nathanvanlieshout78343 жыл бұрын
If there was no picture on the start screen of the video of the finished product, I'd assume it wouldn't come out looking great. Just awesome
@clackersclarke44503 жыл бұрын
That is the most unique ring idea I have seen in a while. Looks very nice.
@Abbie-UK3 жыл бұрын
Beautiful, reminds me of a stain glass window x
@jbtechcon7434 Жыл бұрын
This would look VERY cool with inlays of alternating colors.
@christinaposeyHEADINTHECLOUDS Жыл бұрын
And of course, I have SUBSCRIBED!
@Steel_Saint3 жыл бұрын
Great to have you back! Your videos helped me figure out the details of making crushed-gem inlayed wedding bands for my wife and I, which is something I've wanted to do for about a decade, before I even knew her. Found your channel just in time (about 9 months ago). We'll be married 6 months on Saturday. I am very, very grateful for your videos!! Do you find the UV resin helps reduce dents and chips in the surface layer I'm getting with just the CA glue?
@darcchylde3 жыл бұрын
That came out beautifully
@johnthomas62243 жыл бұрын
Welcome back and that ring is baller as hell
@astridsunderland5553 жыл бұрын
Gorgeous!
@mikejurnak42533 жыл бұрын
Amazing one day I'm gonna get one of these rings Trust Me 🤜🏻🤛🏻
@Prabhjeet3 жыл бұрын
His perfection🔥🔥
@Barbara-11113 жыл бұрын
That ring is absolutely gorgeous! I want one!! ❤️
@SneakyJoeRu3 жыл бұрын
You could cast the ring with metal if you have a smelter instead of keeping the plastic. Could add rigidity and longevity. Afaik 3d printed plastics won't last long if exposed to humidity so this ring despite looking nice won't last for too long.
@Flashbang_Photo Жыл бұрын
I've printed parts that are completely inmersed for years now in a swimming pool, in plain PLA, and they haven't had any issue, so i'm guessing humidity isn't the whole story. Also these mask buckles that everyone used to print during the pandemic (me included) didn't fail either despite being in touch with sweat.
@dennisthiel43462 жыл бұрын
Your videos are great! Where did you get your UV light?
@trikermansbike3 жыл бұрын
Wow that’s great looking thanks for your video.
@ethanknoll37393 жыл бұрын
If you’re looking to get a better print quality keeping your printer in a warmer area can slow the cooling of the plastic and improve quality. I’d imagine if you’re remelting it wouldn’t make much of a difference though.
@ArmorofGod6102 жыл бұрын
I want this ring!
@SamFBM3 жыл бұрын
hes backkk
@SamFBM Жыл бұрын
well maybe not
@stevie93612 жыл бұрын
like to see damacus with wood barrel inlay inside
@oh8wingman3 жыл бұрын
How many hours to make and what could you sell it for if you were so inclined?
@TempestRings3 жыл бұрын
It just takes a day of work, probably $250.
@GabbywaxCreates3 жыл бұрын
any chance you would sell the 3d printed ring core as is?
@TempestRings3 жыл бұрын
You for sure, would you want it remelted?
@javierrocagutierrez1249 Жыл бұрын
@@TempestRingsanother interested here. Do you have this stl in your shop?
@bendancy52772 жыл бұрын
I want one
@christinaposeyHEADINTHECLOUDS Жыл бұрын
I actually HAVE access to a few of the items that you are using, just NOT those HUMONGOUS OPA CHUNKS that you have!!
@moorejl573 жыл бұрын
What a cool idea. Do you print at 100% infill prior to fusing in the salt?
@TempestRings3 жыл бұрын
Ya! It has to be 100% infill, if there is negative space it will collapse.
@woodworkingandepoxy6439 ай бұрын
Whered you go man
@zhongli72329 ай бұрын
Probably busy scamming people on etsy.
@ManoBiletsky2 жыл бұрын
Why don't you use a resin printer? Quality is much better and precise. And for rings you can even use a small one that are only $99.
@redeyestones37383 жыл бұрын
I have a question for ya @TempestRings,. Where do you source you're minerals from? I've been looking for the better part of the day, and all customer review pages have enough ppl claiming scam to make me hesitant.
@FunFirstFamilly3 жыл бұрын
Is that also for sale on website ? I’m about to pick my wedding band from your site will you do custom order as well like a mix of a couple different rings I looked at?
@sucorradae85658 ай бұрын
Is there another name for the salt powder?
@LifeandBB Жыл бұрын
Why aren’t you doing videos anymore?!
@christinaposeyHEADINTHECLOUDS Жыл бұрын
Right!!??
@christinaposeyHEADINTHECLOUDS Жыл бұрын
I LOVE YOU to watch him work!
@christinaposeyHEADINTHECLOUDS Жыл бұрын
Can't believe those stones are holding up! I probably would break it if I wore it ..
@bhamjoe3 жыл бұрын
What UV resin are you using? I wish you sold these as kits!
@ryanarcher95413 жыл бұрын
I ordered my ring over 11 weeks ago and it still has not even shipped yet