Tenere 700 Project Bike Update - 50/50 Street Dirt Build by SRmoto

[@chris8949]

This is really a very nice build ! Thx

[@gufra9835]

Please more details to weight?! What's your total weight? Well done, your project! Thanks man!

[@user-we5yo2yo1f]

Not sure on that. We don't really have any way to weigh the bike at this time. I'd say we are slightly above the factory claimed wet weight. We've replaced a few items that saved some weight, but then also added crash bars, lights, etc that added weight.

[@alexandergotz5568]

why don't you screw the exhaust directly onto the bracket? That really looks like shit! Apart from that, keep it up. You really helped me a lot with my Wr250r, have ordered a lot from you. Make more for the Tenere 700!

[@user-we5yo2yo1f]

(Updated) I talked to Leo Vince about the small extension piece between the muffler clamp and exhaust mounting bracket. That is there to move the muffler down slightly so that it will clear the Yamaha accessory side cases if you have them installed. I guess they test fit the muffler with those and the carbon end cap on the Black Series was contacting the side case, so they added the small extender piece.

[@alexandergotz5568]

@@user-we5yo2yo1f I've fallen on the right side of the motorcycle several times myself. The clamp of the exhaust (LeoVince) simply slips if the screws are not tightened too much. Both the exhaust itself, the clamp and the bracket on the frame are still intact after at least 2 heavy falls in the forest. Simply loosen the screws, align everything, and screw tight again. I see the only reason that the hole in the clamp is a little too close to the exhaust: if you don't file something off the holder, it sits directly on the exhaust. Leovince should have moved the hole of the clamp upwards (2mm would be enough)