Tensioner Belt & Serpentine Install

#audibelt #audiTensioner #audiengine #belt #serpentinebelt #tensioner
#enginebelt #serpentinebelt
Subcribe for more Automotive D.i.y. Install procedures, torque Spec & Repair life Hack

[@MrAkatosh]

That baby pin is a death trap waiting to happen lmao

[@Forward-Observer]

It was on the verge of poppin out the whole time lol. Only thing holding it back was a tiny metal burr lol

[@downunda107]

Tie string to it so dont forget!

[@danielventura8073]

Ok, now do that with the engine in the car an there's 2 inches of clearance, without jacking up the engine and removing the mount.

[@jabroski69]

Ha I have 1/2" clearance on mine can't even get an offset wrench in there

[@ngocphapnguyen1259]

Cha mạo và mẹ ban đại không bên mô nhường nhịn nhau cả đâu bà xa phương Thúy nhé

[@andries4561]

@@jabroski69 get a flat wrench

[@maritzaarchilla636]

Teamo

[@philltafolla]

@@maritzaarchilla636 yo tampoco

[@wadeyant5385]

Finally a video with the engine removed. One can now see what the fingers and flashlights are pointing at in Ody abyss! Well done sir.

[@BigDIrocZ]

An Alan key works better. Just find the one that fits the snuggest and the tensioner will not start to slip. Or even bend the cheap tool. Alan keys are harder steel. I was helping a fellow mechanic out one day he forgot the belt routing and I had just finished one on the same engine different car not 5 minutes prior to him and asked if I could slip the belt on for him. No problem little buddy. As I was doing this his tiny tool…oops his soft tiny tool lol slipped out of the hole ( don’t you just hate when that happens! Lol!! ) and hit me in the face near my eye. As it was I was wearing my prescription safety glasses. Thought you were going to catch me on that one didn’t you? So lesson learned and class is dismissed 😊

[@ezekieljaffah3341]

Just did my Nissan primera using this video and it helps.. Big Thanks To The maker 🙏

[@symlexbrn5396]

You're fortunate to have a car with front space, some have no space it can be a nightmare just changing that belt.

[@jfGarage4k]

Your right i got lots of room, this D.i.y. was a process of a Engine swap better to chance the belt while i got tons of area to work

[@freethareal9422]

@@jfGarage4khow do I tighten the belt tension

[@alejandrobarranco9582]

This is why I love my old truck "1997 ford ranger 2.3" so easy to work on and reliable and when things do break its always in the 30-200 dollar range and can be replaced easily in an afternoon in my driveway with basic hand tools and a floor jack. My favorite vehicle so far one day I'll make it a race truck for being so good to me 😊

[@janedoe6071]

I’m so tired of waiting on people saying they will come fix it and tired of the shops screwing me.. I SWEAR IM ABOUT TO GO HOME AND TRYN DO THIS MYSELF!!

[@jfGarage4k]

Do it. You have all the source you can learn, Google, youtube and Amazon for the tools you need. Good luck

[@martinherrera4907]

I would say, depends on what car you have. Some cars have very little space to replace the belt, but of course anyone can do it.. Just be patient, do your research about what tools you need and be careful,, you don’t want your tool loose contact with the tensioner while you are placing the belt,, you might hurt your hands bad.

[@funkdoktor9099]

Awesome bro. So helpful. Thanks. Awesome edit also.

[@MassiveLoop]

This looks like a TSI used in numerous VAG cars. Depending on which the belt might not be this accessible without either going in through the wheel well or you might be able to remove some mounted components to get at it from above.

[@gener875]

Too bad not all of us have the luxury of having an engine lifter to take it out and actually have this much room for our hands and arms to install it this quick and easy. #GOALS

[@davidedmundson8402]

I've never worked on one with that ease of access, but good video for showing the process.

[@ds_emtar4627]

Mantap kerja yang bagus

[@LuisA1Million]

Great video!! And pretty good music!! but that tensioner pulley was boogered and needed to be replaced ASAP!!

[@jfGarage4k]

Great point!

[@Egumusdere]

Use an allen key. Strong not flimsy as shown here

[@MassiveLoop]

Agree, I think it was a 5mm I used.

[@ibrahimadiaw5786]

C'est super j'aime cette boulot prenais moi comme apprentissage

[@segurosfuerzaaereadom.3757]

el mejor video que he visto en lo que tengo como ayudante de mecánica...

[@venom-fw6de]

An actual helpful video thanks g

[@otmanovanony8206]

merci pour cette démonstration

[@lubyaudia4262]

This was soo damn helpful

[@richardwallace6943]

hi

[@lubyaudia4262]

Hi

[@MamangTeknik]

Wowwwwww amazing bro

[@multitrucksolution2043]

Mantap carakerjanya salam sukses selalu

[@user-or1ro5pu5q]

Thanks For Sharing even few years ago xD

[@jfGarage4k]

Our pleasure! 🙂

[@mellscott22685]

Which brand corn beef opener he used to hold tensioner in place ?? 🤭 I need that!

[@sfolista]

😂

[@PeterBagjuice]

😂 look like Grace foods

[@RS-yj3gn]

Great when you have so much room to do this. On a east west mounted engine often is not enough room for hands or tools. Find that frustrating.... 😂.

[@mikeberry500]

Right been trying to put mine on for 3 days 😂

[@StrongerThanBigfoot]

Toyotas are joke doing this

[@DragonRoyZ]

I wish this was this easy on Mazda 3. Lol

[@n.dchristautocarac]

Great job

[@peted5217]

It's a Miracle !

[@boreed5734]

It somehow always leaves me a satisfying feeling when I put a belt on.

[@guitarwhisperer6262]

Thank you

[@udoojiedimen8134]

Very good work

[@jfGarage4k]

Thank you! Cheers!

[@michaelozoemena3355]

this is so helpful

[@vitthalmisab8768]

Very good

[@darkpassenger65]

Dealer wants to charge me $211 to do this.

[@jfGarage4k]

Shit thats alot.. your doing this job your self then? If so better to take the Radiator fan out before taking and install the belt

[@yoni703]

Super 👌 💯💯thanks bro

[@germanmejia2052]

😳 ?? Huy , y Yo que creía que en ése hueco iva un tornillo de repuesto para algo , 🤔 Juuuunnn de razón nunca lo encontraba 😳 ?? 😄😃😆😅😂🤣 Jajajajaja

[@abbaskhdr]

Good mind easy work.

[@Lueis1970]

so I see a lot of people just figured this out 😃😅 ,

[@RobertSilian-ze8iq]

Great!!

[@AdrianMacias-fs6yt]

How do I change an alternator on a 2017 Ford fusion SE Ecoboost 1.5

[@jfGarage4k]

You gonna have to KZbin search it. I'm sure tons of videos out doing that job

[@kaiezesi6630]

I have a j35a8 out of 05 rl, does this video reflect the same process for the drive belt and tensioner/ pulley replacement on that car?

[@JB-423]

Is that a grenade pin?

[@w.thomas306]

😂

[@chriswilliams9551]

They come in timing belt tensioners

[@michaeldelrossi4487]

Nah. It's a Pip Pin!

[@trainkobe2424]

🤣🤣🤣🤣

[@edebawyedebawy7504]

Beautiful

[@fanaticforager6610]

So that’s how ✋🏽 I was about to pull thâ pin 🧷 ⚠️

[@phillipmartin1088]

Nice job that'll be $200

[@coldwinter22]

$200 for installation $100 for checking if they need to be replaced and $500 for labor fees lmaooo

[@chuckcarter3417]

😅amazingly easy once you ca figure out how to get to the pulley/tensioner with the right tools

[@user-oe2ds2nb7t]

Masha Allah

[@Priority57]

Waiting for that pin to give out

[@jfGarage4k]

Hahah 😁 This pin is made from China its a strong pin lol

[@Priority57]

@@jfGarage4k China pins are better?.. Lol ok

[@bangmadid8460]

Jenis mobil apa ? ford fiestakah? atau Suzuki Diesel?.

[@ragedaspric1373]

galing naman idol

[@faisaljutt359]

Good job

[@nizarkhrisat6194]

Nice

[@josiahezebunwa4357]

Nice 😊🥰

[@michaeldelrossi4487]

Nice, which car is that feature on?

[@Cerejka]

Ребенок сможет.

[@onyx0076]

Hello.. to remove the pulley.. do you have to lock it in place with the pin or you can just remove the belt and remove the pulley after ?

[@Ibangajoshua-cm1bl]

Good

[@limeallens6160]

im trying to learn from these videos to install a serpentine but nobody is showing the belt going around the fan. it has to go around the fan to get in there right?

[@jfGarage4k]

On This video Audi a4 2.0t engine have no engine fan pulley. It has a Electric fan

[@TheSubwayHobo]

Other than all the commenters saying they don't have enough clearance haha is it really just this easy? 😮

[@banjofernandez]

Can you spray wd40 on the pivot area of the tensioner pulley? I noticed mine when i initially turn on the ac, a slight sound of a knocking noise occurs. But when my engine is warmed up. There's no knocking sound.

[@hairsing6559]

❤ good

[@lloydgwekwerere4722]

You save me thank you

[@christophermyers1991]

Does this work the same for all of the engines of the Tucson?

[@erasmuschari8783]

Cool

[@marcusware6343]

🔥🔥

[@torchit007]

Uh...your missing the rest of the CAR

[@jfGarage4k]

This was a engine swap, tooked the rad support out, follow my KZbin series on AudioA4 for more detail

[@ahiablekoffiamenyo5502]

Courage 💯💯💯💯

[@rameshrattanam3599]

Wow what car ....

[@rjb9027]

this is the timing belt, how i can ensure that the timing will not change

[@hidzirwalid4069]

It's same for all engine bro?

[@jgsanchez503]

Can u do that easy in a scion tc please!

[@jimpie231]

What make is this engine? Out of which car? Is the engine out of the car? Thanks…Jim

[@brad2548]

Is that a 7.3 powerstroke diesel ?

[@naveenmaharajnaveenmaharaj4235]

👍👍👍👍👍

[@pablosmokes2556]

Bro has all he room in the world my Car give me 1 1/2 inch clearance take it or leave it. I love my BMW 😅

[@bongilenyanga1186]

Please help where to a position my engine I have followed everything right but there is an error on my screen

[@young9900]

Hi there is this same principle for Audi a5 2011 tsfi

[@jfGarage4k]

Yap

[@IkedichiGodspower]

😮 good day sir please what the spanner size

[@ontheedge33371]

Nice do they all have the pin hole for locking it in place ?

[@jfGarage4k]

Not all tensioner have this style pin hole.

[@ontheedge33371]

@@jfGarage4k thanks , I recently used an old set of mini bike handle bars to put over the end of the 3/8drive ratchet for more leverage and locked it in place by using a tie down strap from the handle bars to the front end hardware behind a front tire lol Worked but the pin hole would be nicer and this one didn’t have one that I could see so 🤷🏻‍♂️it should be standard on those dang tensioners 🫠

[@larryjustis4577]

I love you

[@bongilenyanga1186]

My belt broke off and when I installed it there is an exclamation mark and lock sign

[@UnpopularGameGuy]

Tougher with a big fan cutting up your hands but definitely not impossible

[@mamieh_vandes]

The Filter man Hammel. Made In Indonesia

[@VictorSilva-dw2xq]

Know we know 😎👍

[@mixdiver12]

The engine is removed, hence the space

[@mattrodz2168]

What happens if you put the belt in a worng position?

[@fsspecial85]

If it did not sit on all the teeth it will spoil the belt If putting wrong position could cause belt tension problem....so it's best to place it the original position Usually if I forgot how I put the belt...I don't need books or some sort....just Google it then you know how the serpentine belt position

[@africaland506]

Devi sostituire la puleggia del tendicingia

[@JOHNYUL2]

Look easy

[@CodyHendry-iy1qh]

hello

[@oliverjantz1108]

Ccta or later vw engine

[@myviews469]

Is there a certain direction I keep getting jumping one rib over

[@jfGarage4k]

Take the belt off and Double check all the pulley, make sure they all tight & Not loose this cost to jump the belt

[@myviews469]

@@jfGarage4k ill do that today but i still think there's a directional on this belt

[@sergioramirez1693]

😅 if only.

[@adanhernandez363]

Si pues el motor afuera está muy fácil ponerla .....¿haber ponla en un motor puesto en el auto y con un espacio de un centímetro entre el y carrocería?🤷‍♂️

[@billalhossen6648]

nice

[@antoniocortez6136]

What vehicle is this video for..?

[@manuelmussenden2666]

Haven't seen that pin trick... 🤔 Nice 👍

[@pedrocarsandsteel]

Menuda marranada dónde va instalado el filtro de aceite, seguramente habrá que quitar la correa antes de hacer el cambio de aceite y luego colocarla☹️

[@jgsanchez503]

No, por la posición del filtro y en la forma que esta instalado no hace derrames, si vez bien el motor luce muy limpio en esa zona casi es como la toyota tacoma!

[@xMylox]

is it that hard to just hold it when you put the last part of the belt on lol

[@olowuayoola]

Please what's the belt number of this volvo 440 s40

[@robertellingtom2683]

Use the proper locking pin that one could slip and that would be bad news

[@jfGarage4k]

Sorry its all i got around the area

[@robertellingtom2683]

@@jfGarage4k you have a good video

[@turboupgradegokartjoe1174]

Worst case scenario it slips he has to pull the tensioner again haha doesnt seem like the stuff my nightmares are made of.😂😂

[@robertellingtom2683]

@@turboupgradegokartjoe1174 people like you trigger responses this. If you've never changed one of those before you obviously have not if that conflicts while you had his fingers in those who's very well easily lose a finger don't ever become a mechanic you'll probably become a victim of leaving a jack without a safety and having the car fall on you

[@chorpolash]

maby this engine of renger ford motor?