Teraflex Falcon Nexus EF 2.2 Adjustable Steering Stabilizer w/ RPM Steering Tie Rod | Install | 4K

Enjoyed the video? Subscribe!
/ @projectraptor6975
INSTAGRAM
@project_rapt0r
Steering Stabilizer (1-3/8")
www.morris4x4center.com/teraf...
RPM Steering Ultimate 2.5 Ton Tie Rod
www.rpmsteering.com/25-Ton-JK...

[@mikesmith9769]

You were supposed to place those washers between the new clamp and the stabilizer… I know this because the owner of RPM Steering send me the video link

[@projectraptor6975]

Thanks for the information. I wound up having to change the Clamp out for a new one since I stripped the threads where the screws go and I did put the Washers there.

[@chrisparsons7036]

The issue with removing the clamp was probably due to the stud being left hand threads. Clockwise to loosen. kzbin.info/www/bejne/gIbKapitZs2In5o

[@projectraptor6975]

That makes sense. Thanks for the info!

[@MrSupremeT]

The bro!!

[@projectraptor6975]

What's up brotha man! Miss seeing you big dog.

[@DilettanteDon]

I wonder if this works with the mopar 2.5" lift.

[@projectraptor6975]

It should work just fine. There are three different Clamp styles for these Stabilizers; There's the 1-3/8", which is for the Stock Tie Rod, the 1-5/8", which is for most aftermarket Tie Rods, and then there's the clamp I got for the RPM Steering 2.5 Ton Heavy Duty Tie Rod.

[@DilettanteDon]

I was wondering more on the clearance and not bumping into either the tie rod or drag link.

[@projectraptor6975]

@@DilettanteDon Oh I gotcha. I would think it would be fine.

[@Paddockguys]

How much lift do you have ?

[@projectraptor6975]

The Lift Kit I have is the AEV DualSport LHD 4.5" Lift Kit.