Terminator X EFI for LS Engines

Terminator X was designed with the do-it your selfer in mind. It’s an ideal platform for anyone that wants all the benefits of fuel injection with the versatility and tune-ability that only Holley EFI can provide.
Holley’s Terminator X provides lS swap enthusiasts and entry level racers , a low cost ECU platform, that’s capable of controlling electronic fuel injection, drive by wire, electronic transmissions and much more. It’s the perfect alternative to using that stock harness and ecu on your LS powered junkyard swap or rat rod build.
PURCHASE: www.holley.com...
Subscribe now to make sure you don't miss any of our new products!
www.youtube.co...
HOLLEY ON SOCIAL:
Facebook - / holleyperformance
Twitter - / holley_news
Instagram - / holleyperformance
Website - www.holley.com
Product Videos - • Product Videos
PURCHASE: www.holley.com...

[@carsntrucks782]

I'm happy with my terminator x max very good quality. At a reasonable price. 👍 We need versions of this for the coyote and hemi.

[@longsleevethong1457]

*too

[@ashleyholliday2855]

@@longsleevethong1457 "eat a sav mate"

[@Funtimes670]

I am so excited to get my 5.3 installed and run it with the Holley Terminator X!

[@willfleischauer]

What its going in?

[@Burndown]

This really is a killer budget friendly stand alone ECU! I really like mine and cant wait to get the race dash for it. Keep up the outstanding work Holley! -Dane

[@lsxmatt]

I wasn’t planning on changing my ecu setup with my new 6.0, but now I might have to pick this up...

[@HolleyPerformance]

It's a worthwhile investment! -Keith

[@michaelanderson5108]

@@HolleyPerformance if that’s true why don’t you support the crate engine throttle body on GM 376/480 525???

[@dynamicdopamine]

@LsxMatt I love your car bro. I'd love to see your same set up in a foxbody mustang.

[@Slowmo896]

While it’s super cool for tuning there’s plenty it’s missing if your like me,and would rather be able to control everything from one controller or laptop like you can do when tuning a stock ECM .. especially when doing LS swaps you run into issues where you cant use the stock systems for , accessories,without spending a arm and a leg.. This would be crazy cool if they added things like AC, 2 different fan speed controllers,for cooling and condensers,and say fan control for whatever you can come up with,like transmission coolers,or inter coolers ,plus a four wire /for 4 O2 sensors for both banks for those wanting to run CATTS..speed sensors for driveshafts and even suspension settings to change shocks and strut settings ,be nice to have a plug in for those QA1 settings while on the fly, 😊just take a little motor with a shaft or even a collar to just slide over the knobs on the side of the shocks, and no more climbing under the freaking cars..

[@ryanlott6309]

Pretty sure you can live tune a stock ecu with hp tuners. Still pretty comprehensive ecu from Holly good work guys

[@Stevesbe]

Can't compare to what this unit can do

[@ryanlott6309]

@@Stevesbe said that based on a commt made in the video making it seem like you can only live tune their product and no other.

[@joshualee6614]

Damn. The turbo controls seem awesome

[@crw3673]

I love the whole concept behind the Terminator X and Terminator X Maxx. But a lot use the factory harness and ecu, because we need to pass emissions. You guys come out with a obd2 wire harness or let us know how to interface the obd2 with the Terminator X and I'm sold!

[@rokonmontana7457]

Any plans for updates for more transmissions like the newer 6l80 6l90's?

[@mythos000000025]

I love how they say its plug and play, yeah with their harness but not with the stock harness. I love the ls engine but shit other manufacturers keep the same damn plug long enough for others to make TRUE plug and play ECMs .

[@HolleyPerformance]

This is a complete plug and play standalone system for $999 and that price INCLUDES a brand new high-quality wiring harness. -Keith

[@toweringhorse2054]

I want this so badly

[@teknikalvette]

No obd2 , nice trick. Some of us need to pass emissions. All the videos I see promote all the features but let's be honest, obd2 is a must.

[@crw3673]

That is what I have been asking about since February! Not all of us can afford 2 cars. One race car and one daily driver.

[@stevenmarxs374]

It only matters if you live in a shithole state like California

[@franklugo6928]

@@stevenmarxs374 not true, the larger cities and countries across the country have emissions testing during road inspection. Even in parts of Texas you have to hook up to the odb2 so the emissions computer can check if everything is legal.

[@Leveluplivin]

@@stevenmarxs374 no in Missouri too

[@brendanfinnerty6496]

@@franklugo6928 its more for people who want a cost effective standalone solution to do ls swaps into older chassis or racecars. For a newer obd2 ls powered car you should just stick to the factory pcm and and use HPtuners software to tune and reflash it.

[@ericwilson2585]

I've got a question please, is the terminator X capable of doing flex fuel?

[@richbororust7448]

I've been waiting months for my Terminator XMaxx. Holley is not offering any delivery date other than "will ship soon".

[@jamesdriscoll2478]

I love you 😭

[@chriskubond6314]

This comment made me LOL. I saw what you did there

[@projectgattago]

I have some Terminator X software overview videos on my channel.

[@RealityUntold]

Is there a way to re pin the terminator x for a different firing order? Also, could I load a base map for say a different DOHC V8?

[@betosgarage]

Earth without art is just eh , but not this . Looks dope . Gotta order one soon

[@tremec6]

Who ever named this product is a big fan of the classic rap group Public Enemy.

[@ss0073]

tremec6 Chuck D and Flavor Flav and Terminator X 👍👍👍

[@G_Rapids]

Im sold.

[@maxgidi9223]

Can I use my cruise control with this kit??? My vehicle is a 2004 Jeep Wrangler with a 2.4l engine

[@formulacam]

Thaaannnk you!

[@Jmprofessionalimagin]

excellent video, well explained, I just bought the terminator X without the 3.5 display and I bought the 7 ”display, my question is, I can do the first steps as in the 3.5 display that asks you in wizard what injectors you are going to use and what engine do you have and be able to calibrate the tps or not?

[@GibsonRedd]

Would you have any insight on which Holley terminator I would use with this set up 2006 5.3/Sloppy stage 2cam (4L65E transmission). Any insight would be greatly appreciated

[@ze_german2921]

I can't find no information on running a starter or alternator with this system. Your phone line is overcrowded and email has been taking over a week now

[@slash2492853]

Did you ever find out?

[@gmiles7217]

I wanted to put a 5.3 in my boat. Is this all I need to do it?

[@vvvv-lu8zi]

I guess you still need a dyno tune if you turbo charge your ls engine?

[@HolleyPerformance]

Definitely. There are far too many variable to completely rely on the learn function for a higher horsepower boosted combo. -Keith

[@hermansmith1974]

You said big boost but you also said a 2 1/2 bar map sensor so is that all they can do? You can’t use no more than a 2 1/2 bar?

[@dynamicdopamine]

So if I order the big screen to put in my dash to replace the stock gauges (water temp-oil pres-battery volts- and fuel level) in my 4th gen camaro... how will I read "know" how much fuel I have in my tank? Do I have to buy a aftermarket fuel gauge?

[@davidgagliardo3258]

Does this come with an OBD II port, so I can plug in my Dakota Digital VHX dash?

[@HolleyPerformance]

Sorry, it does not have an OBD port. J

[@truethinker68]

i spoke to Dakota digital directly and they said the terminator x max will work the their gauges. display input

[@TheReinoPaasonen]

Dark Awesome!

[@antonioaguero2242]

Thank u

[@georgeowen2083]

Damn I am good. I know how overpriced holly is. I did my harness myself for free. Paid 175 including shipping to have my ecu flashed. I will take the 1300 dollars I saved for some new goodies.

[@dogle9258]

Do you publicly try to suck your own sick often?

[@stitch684]

Krimson Wolf 😂😂😂

[@slickf4i110]

So the system uses the stock gas pedal and throttle body and tac module?

[@oldmanmtb1443]

Is this a self learning unit or do you still have to tune it yourself.

[@HolleyPerformance]

It'll work both ways!

[@leonardoobay500]

Can i put this on a stock 98 camaro to make tuning easier

[@mariofrat5055]

TheTruth sure can!!

[@HolleyPerformance]

Yes, as long as you have an LS engine in your vehicle you can use the Terminator X! Thx J

[@trav1971]

It works for stick cars to?

[@SpeedAddictted]

What is the difference between x and x max?

[@Neutsie]

Is it possible to wire the main harness to my vehicles stock dash cluster?

[@vallogino142]

@holley im currently doing a swap ( O5 gto ls2 engine with 4l60e transmission ) on my 68 Pontiac Catalina. Which Holley terminator x I should get for my application.

[@zigandarov]

На 5hp24 возможна установка данного ЭБУ???

[@user-og5ri5rs7k]

traction control possible?

[@JohnSmith-qj4cf]

Guy I love it how much is the cost

[@1gnasty]

Holley please make the terminator for the ford modular!!!!

[@jdubcbr600]

Use an MS3X from megasquirt.

[@1gnasty]

JoshW817 I have a ms gold box on my nova but l I do like the terminator a bit more after playing with it in my friends Camaro

[@1gnasty]

JoshW817 plus is expensive at the end of the run

[@cbr1thou]

Not gon happen

[@1gnasty]

cbr1thou would be nice if the do the only market out there is not ls based only

[@brainc0la-_-]

Cool.

[@brandonpylant9349]

Does the terminator x max come with transmission harness

[@chickenfoundation9323]

Can this be used for an LSA with a 6l80e?

[@rumbador]

Need help choosing the correct one for my ls1 engine on my 1969 camaro. Have stock harness an ecu from a 2000 camaro and 4L60 transmission. Is causing me a lot of trouble and there is wires everywhere.

[@HolleyPerformance]

Give our tech department a call for a recommendation! 866-464-6553

[@alexisluna4890]

Does this works with the ls4 engine

[@Power_Tech_TV]

Oh Hell Yes!!

[@Bob-Sacamano]

What chassis is that at 0:24? Never seen a brake booster relocation like that before.

[@oldskoolcardude6361]

Most likely a street rod chassis

[@projectgattago]

Looks like a Tri-Five chassis.

[@HolleyPerformance]

RH Othman, that is my slightly modified 1999 Dodge Dakota frame for a 1951 Studebaker 2R5 truck body. I mounted a 7" power brake booster and master cylinder under the floor to clean up the firewall and extra space in the engine bay. thx J

[@TheReinoPaasonen]

HolleyPerformance thank you Holley for answering off topics as well. You guys are real hotrodders👍

[@HolleyPerformance]

@@TheReinoPaasonen Just hotrodders helping hotrodders! thx for the positive feedback! J

[@swangin_dirty_rods_tv]

This cost to much when I can d pin my stock harness and tune it with hp tuners way cheaper the this set up but... it would be cool to try it out

[@swangin_dirty_rods_tv]

Its very cheap hahah Ya right i do better with the stock pcm and i go just as fast But really now days going in a straight line is outdated

[@swangin_dirty_rods_tv]

Hahahah ur just a dumb ass it ok i deal with a lot of people like u in Sacramento then i drag there ass lol u should see there face when its just a stock truck pcm 🤣😂🤣😂 have fun giving ur money away

[@AvatarNecron99]

Can it be adapted to a gen 1 old school sbc if the sensors and injectors are already there?

[@HolleyPerformance]

It can be but you will spend a lot of money to get the ignition and fuel system upgraded to work with it, rather then just buying an LS engine. thx J

[@AvatarNecron99]

@@HolleyPerformance The car is already fuel injected, just currently on a stock computer. Just looking to have an inexpensive way to upgrade for a turbo and tuning.

[@HolleyPerformance]

@@AvatarNecron99 You would still need to replace the distributor with a dual sync style unit so you had both crank and cam signals. You would also have to upgrade to 8 individual "coil near plug" coils to work with the harness. Thx J

[@G_Rapids]

3:01 - What my brain is saying when i have a slow reaction time to a tree

[@jessekulbe1855]

Can this be run with factory gauges?

[@garbass1998]

Can I use this on a 99 5.3 with stock truck intake?

[@HolleyPerformance]

Definitely!

[@garbass1998]

HolleyPerformance what if a also had a aftermarket cam?

[@dickeymoore7365]

Ill stick with my Holley ultra double pumper On my sbc 406!!!!

[@jonathanpalahitski9596]

I want to convert my 6.2 lt1 to a carb set up but run the holley sniper. Can I use this kit to control the sniper and the trans? Also can it control a 6l80E

[@HolleyPerformance]

This will not control a Sniper TBI. This is for multi-port EFI only. Give our tech line a call for a recommendation. 866-464-6553

[@socialghost4400]

Why is a fuel injection control system called “Terminator”? ....what is it “terminating” exactly?

[@HolleyPerformance]

It's "Terminating" your need to settle for anything stock!! LOL!! Thx for the deep thought, J

[@joshuaavila8317]

@@HolleyPerformance hey I have a question I have a 1989 Silverado I'm dropping a 5.3 and 4l60e from my parts truck it's a 2000 Silverado, if I buy this kit is it able to self tune or do I need to get my truck tunned for its stage 3 cam form tsp. If I get this will it be about plug and play style and the ecu is programmed and ready for me to turn the key and itll crank on .

[@HolleyPerformance]

@@joshuaavila8317 Yes Terminator X is a self-tuning EFI system that uses a wide band O2 sensor. Use our EFI selector to get the correct wiring harness that will connect to most all of the factory sensors on your engine. You will have to load a calibration to the ECU before start-up but we have plenty of videos To show you how to do the whole process. Thx J

[@georgeowen2083]

I can only imagine how expensive this is. My guess they run 1200-1500 bucks!

[@walterturner3230]

George Owen lol it’s 1k flat, and that’s damn cheap compared to most standalone ecus.... no complaints from me

[@ntwtransam]

No need to guess they have been available for months now.

[@walterturner3230]

ntwtransam yup. Literally bought one this week from MAP. 1k shipped. And that was with the little electronic dashboard too

[@freethinkingamerican80]

$1000 is cheap!

[@vettemaster13]

May be a silly question but would the terminator x max work on the 2014+ 4.3 v6 ls styled engines?

[@HolleyPerformance]

I believe it would require software specific to the 6 cylinder engine for proper operation since there are 2 fewer injectors and coils. Thx J

[@themayorh41]

Is this also available for LT5?

[@HolleyPerformance]

Not yet, give us a little time! Thx J

[@miguelg3537]

What about carburetor set up 😭😭

[@salfun3655]

Can I use this on a 91 corvette obd1?

[@HolleyPerformance]

It will eliminate the OBD system but yes. thx J

[@drptp5017]

im.in no rush i rather wait and send in my ecu for reflash..than pay that ridiculous amount of money

[@mhfuXmonsta]

this might be a stupid question but do i need to wire in fuses?

[@HolleyPerformance]

No. This harness includes everything needed. -Keith

[@mhfuXmonsta]

so what all needs to be fused after this like the starter and fans?

[@chevybox9]

Can The Terminator control 6l80e's?

[@jamesdriscoll2478]

Click the link to buy it has some trans controls

[@gomeztx]

not yet

[@BBBILLY86]

That would be amazing

[@HolleyPerformance]

No control for 6 speed autos. Only the 4L60/80 style transmissions

[@jdmdrew575]

The Terminator x max can, it's 1300 bucks. I'm definitely not hating on holley, but it might still be cheaper to get hptuners if your on a budget and just make your own harness. If not then this is the way to go because it's a plug and play system.

[@kennethking8759]

How do I upload new injector data that isn’t already pre loaded

[@HolleyPerformance]

It's under the system parameters menu in the software. -Keith

[@jm361]

@@HolleyPerformance peep this! This guy is the legit LT1swap guy gm guru kzbin.info/www/bejne/aHaXc4iHm8hpnac&lc=z23rfj3qfpe3hvrt5acdp430vewomin4hjwy4jehpe1w03c010c.1579036350094700, watch that and tell me what you think, cause of that issue right there makes me worry that if I throw some coin at yalls product and have a similar issue will I be stuck? Will I be done the same way? Consumers wanna know what to expect when buying something that is supposed to be better than a stock/flashed system!

[@americandualsportrvifeadve3153]

Will this work with true dual exhaust with only one o2 sensor?

[@wvXvxvXvw]

Only retards run "true dual" exhaust so I doubt they really care. If you're too broke to buy/build a good exhaust system then you are probably never going to fork out the money for this EFI kit.

[@darrellmorris6116]

@@wvXvxvXvw your a fucking dumbass keyboard warrior arent you. Shut your ass up.

[@truethinker68]

will Dakota digital gauges work with the terminator x max?

[@HolleyPerformance]

I don't have any experience with them, and that would be a better question to ask of Dakota Digital. We however do have a full line up of digital and analog gauges to choose from. check them out! Thx J www.holley.com/brands/holley_efi/products/fuel_systems/fuel_injection/gauges_and_displays/analog_style_efi_gauges/

[@HioSSilver1999]

Yes it would work. Dakota digital dashes are stand alone type set ups.

[@scottydoesntknow254]

Would yall be willing to help my charity case butt with a holley hook up lol I might be getting medically separated from the air force and need to get my project truck going incase that happens 😪 been in 11 years and my be getting the boot for a back injury that I got while deployed

[@platnumtonge5972]

Owwww chuck D is gonna sue somebody

[@dylanhale7300]

Holy fuck this is powerful! How much?

[@tra666666]

How much is it

[@HolleyPerformance]

That all depends on which one???? here's a link so you can check them out for yourself. Thx J www.holley.com/brands/holley_efi/products/fuel_systems/fuel_injection/terminator_x/

[@joelrushin4363]

What does Holley offer to the mustangs? Have a 4.6 3v putting into 71 f100 would like a kit like this

[@TheReinoPaasonen]

LS swap kit..

[@joelrushin4363]

@@TheReinoPaasonen doing that to a 73 mustang

[@emmanuelponce9151]

Wow REVISE From Books To Computers The Human Species Continues To Evolve In Its Understandings And Potential Through Advancing Technologies. Now In The Advent Of 5g Comes The Android Smart Glasses Android Smart Glasses The Future Of DIY (Do It Yourself)Apps,Social Expressions (Emoji Que)And Literal Composure's Relevant To Specifics In Diversity Will Now Take A New Level In Human Utility. To Take Into Account The Expansion Of Data Collection And Availability Through Open Source Media Has The Ability To Revolutionize The Education System,Its Understanding,Application And Most Important ,Cost. Enyclopedia Brittanica,Wikipeda You Tube Etc Would Reach Beyond Boundaries As Set Today .Through Allocated Literal Composure's And The Augmented Reality Programs We Can Get A More Thorough Overview Of Subjects And/Or Mediums In Addressment.From The External Symetry Of A Apple To Its Constituent Elemental Propensities And The Laws Of Physics With Their Mechanics Will Be A Bold Dynamic 3d Visualization;A Breakthrough When Considering Our Massive Library To Date And The Potential Of The Augmented Reality Technology Program,Social Media Can Now Be Less Cumbersome As The Necessity Of Textile Interaction (Finger Touch)Required From Our Smartphones Is Drastically Reduced Or Eliminated. A Highly Required Feat That Busy Parents ,Drivers,Buisness Managers And Production Workers Would Enjoy, To Think Who Doesent Want To Tap Into A Sensor And Talk ,Text Or Command A Operating System Like The Internet ,Facebook You Tube ,Social Media ,Apps etc Without Taking Your Hands Off The Wheel Of A Car,A Cooking Utensils In Utility Or Dishes Being Washed.Clearly I Would. Do You Want More Control Over Your Childrens Smartphone Interactions;Download A App And Gain Full Discretion Over Your Loved Ones Interaction By Monitoring A Transparent Screen In Front Of Your Eyes. Imagine Setting Up Cameras That That You Can Tap Into At Anytime Through G5 Internet Conection Giving You Remote Control And Access To Diffrent Environments Putting The Mind To Ease Or Even Our Own Well Being At Our Discretion. Tired Of Paying High End Expenses For Computer Trouble Shooting Or Appliance And Or Auto Repairs;The Potential Of Live 3d Virtual And Augmented Reality Can Guide You Step By Step Through The Procedure Making It Convinient To Human Independence, Potential,Creativity And A Bargain When Considering Todays Prices.I Know I Would Like To Install My Own Turbo And Cook Affordable Gourmet Meals Without Having To Comprimise Financial Stability. Beyond Human Independence Through DIY Apps Human Health Can Take A Revolutionary Leap As Well.From The Break Down Of Desease In Epidemiology,Physiopathology Etc To The Focal Points In Trauma And Nerve Damage In Neurology And Endocrinologic Understandings ,Mental Health Can Take A Leap Forward As Well. HUD-Heads Up Display Glasses Tuned To EEG Technologies, Biometric Technologies And AI (Artificial Intelligence )Computation Should Lead To Progression In Parkinsons/Alzheimer's (Etc) Therapy As Solid Analytics Are Produced.Tune The HUD Glasses With Multicellur / Multi Alternating Stream Transcranial Direct Current Stimulation Reinforcing Multicellular/Multi Alternating stream Deep Transcranial Magnetic Stimulation , Neutropics And Stem Cell Therapy And We May Overwrite The Influence Of Dead Cells And Their Impact On Neurological Pathway Systems Resulting In Higher Focus , Cognitive Adaptations And/Or Emotional Recalibration That Can Revolutionize The Dependence In The Pharmaceutical Industry.Who Doesent Want To Curb Crave When It Comes Down Fatty Foods And Nicotine Addiction? The Innovation And Ultimately Contest In This Market Is In Its Conceptual Stage,A Factor That Can Easily Be Changed Through Collaborative Design Projects Like Lennox And Wikipeda And Thus Become Common Rhetoric In Its Dynamics And Utilitarian Evolution .The Possibilities Are Endless.Companies And Manufacturers Like Microsoft,Google,Sony,Mad Gaze,Recon,Smith And More Are Already Starting To Scratch The Surface In This Market Giving Hopes For A More Independent And Interactable Future. To Conclude;Ultimately Its The Virtue Of Control And Independence Created By This Product That Could Be Said To Set The Evolution To True Human Emancipation And Scientific Advancements.If You Would Like To See This Product Put In Production Join The Collaborative Design Project And Pass It On... REVISE REVISAR De los libros a las computadoras La especie humana continúa evolucionando en su comprensión y potencial a través de tecnologías avanzadas. Ahora en el advenimiento de 5g llega el Android Smart Glasses Gafas inteligentes Android El futuro de las aplicaciones de bricolaje (hágalo usted mismo), las expresiones sociales (Emoji Que) y la compostura literal relevantes para los detalles en diversidad ahora tomarán un nuevo nivel en la utilidad humana. Para tener en cuenta la expansión de la recopilación de datos y la disponibilidad a través de medios de código abierto tiene la capacidad de revolucionar el sistema educativo, su comprensión, aplicación y, lo más importante, el costo. Enyclopedia Brittanica, Wikipeda You Tube Etc llegarían más allá de los límites establecidos hoy. A través de los programas de composición aumentada y de realidad aumentada podemos obtener una descripción más completa de los temas y / o medios en el direccionamiento. Desde la simetría externa de una manzana hasta su componente Las propensiones elementales y las leyes de la física con sus mecanismos serán una visualización en negrita y dinámica en 3D; un avance al considerar nuestra biblioteca masiva hasta la fecha y el potencial del programa de tecnología de realidad aumentada, las redes sociales ahora pueden ser menos engorrosas como la necesidad de interacción textil (Toque de dedo) requerido de nuestros teléfonos inteligentes se reduce o elimina drásticamente. UNA Hazaña altamente requerida que los padres ocupados, los conductores, los gerentes de negocios y los trabajadores de producción disfrutarían, pensar quién no quiere aprovechar un sensor y hablar, enviar mensajes de texto o mandar un sistema operativo como Internet, Facebook You Tube, redes sociales, aplicaciones, etc. Quitar las manos del volante de un automóvil, utensilios de cocina en la utilidad o lavar los platos. Claramente lo haría. ¿Desea más control sobre las interacciones de sus hijos con el teléfono inteligente? Descargue una aplicación y gane discreción completa sobre la interacción de sus seres queridos mediante el monitoreo de una pantalla transparente frente a sus ojos. Imagínese configurar cámaras que pueda aprovechar en cualquier momento a través de la conexión a Internet G5, que le brinda control remoto y acceso a diferentes entornos, lo que hace que la mente se relaje o incluso nuestro propio bienestar a nuestra discreción. Cansado de pagar gastos de alto nivel para la solución de problemas de computadoras o electrodomésticos y / o reparaciones automáticas; El potencial de la realidad virtual y aumentada en vivo en 3D puede guiarlo paso a paso a través del procedimiento para que sea conveniente para la independencia humana, el potencial, la creatividad y una ganga al considerar Precios de hoy. Sé que me gustaría instalar mi propio Turbo y cocinar comidas gourmet asequibles sin tener que comprender la estabilidad financiera. Más allá de la independencia humana a través de aplicaciones de bricolaje La salud humana también puede dar un salto revolucionario. Desde el desmoronamiento de la enfermedad en Epidemiología, Fisiopatología, etc. Bien. Las gafas con pantalla HUD Heads Up sintonizadas con tecnologías EEG, tecnologías biométricas e inteligencia artificial (inteligencia artificial) deben conducir a la progresión en la terapia de Parkinson / Alzheimer (Etc) a medida que se producen análisis sólidos. Sintonice las gafas HUD con Multicelur / Multi Alternating Stream Transcranial Direct Estimulación actual Reforzando la corriente alterna multicelular / múltiple Estimulación magnética transcraneal profunda, terapia de células madre y neutrópicos y podemos sobrescribir la influencia de las células muertas y su impacto en los sistemas de vías neurológicas que resultan en un mayor enfoque, adaptaciones cognitivas y / o recalibración emocional que puede revolucionar el Dependencia en la industria farmacéutica. ¿Quién quiere reducir la ansiedad cuando se trata de alimentos grasos y adicción a la nicotina? La innovación y la competencia final en este mercado se encuentra en su etapa conceptual, un factor que se puede cambiar fácilmente a través de proyectos de diseño colaborativo como Lennox y Wikipeda y, por lo tanto, convertirse en retórica común en su dinámica y evolución utilitaria. Las posibilidades son infinitas. Microsoft, Google, Sony, Mad Gaze, Recon, Smith y más ya están comenzando a rascar la superficie en este mercado, dando esperanzas para un futuro más independiente e interactivo. Para concluir; en última instancia, es la virtud del control y la independencia creada por este producto lo que podría decirse que establece la evolución a la verdadera emancipación humana y avances científicos. Si desea ver este producto puesto en producción, únase al proyecto de diseño colaborativo y páselo En ... REVISE

[@jleatherwood2286]

Your company has the absolutely worst technical support I’ve ever seen in my life. And I hope you all are enjoying your weekends now that you don’t even offer any tech-support on Saturdays! Ordered a terminator X max and 5” display while on the phone with your “sales associate” after my dominator got turned into brick following your software upgrade videos. Xmax and display show up and doesn’t even have correct software for the ECU. So of course we go back online and follow your instructions on updating the brand new ECU and get the same exact message again that the software is incompatible with the ECU. Been building racing engines for 50 years and have a dealer account with your company, but when we call for technical support we get somebody who was probably working at Walmart two weeks ago. You are guys are doing a fantastic job if alienating your long-term customer base is your goal! there’s nothing user-friendly about your terminator X max right out of the box.

[@40rtyp]

Traction control?

[@projectgattago]

There are advanced tables, which many people have used for traction control. If you want real traction control, you need the Holley Dominator.

[@HolleyPerformance]

Projectgatto is correct, If you want real traction control you need the Dominator! terminator X was designed for the average swapper that didn't need features like traction control. thx J

[@jblue1299]

What is LS ?

[@HolleyPerformance]

Where have you been???? en.wikipedia.org/wiki/LS_based_GM_small-block_engine thx J

[@truethinker68]

what's life?

[@justincollins7233]

@@truethinker68 🤣🤣🤣🤣

[@peterpann9619]

It's not that affordable.

[@LoZHandyMan]

its meh.....

[@mariofrat5055]

Waifu Hunter G LOL!! Yeah.... right!!! Must be a Ferrrd owner! LOL!!

[@supermediumtv7091]

Junk yard motor cost 200 this shit cost 999 wow really how this gonna cost more than the motor

[@NightWrencher]

Thats not exactly true. Alot of engines run $300 and often times they make you pay for the harness and ecu seperately. Then you gotta get the ecu flashed for 150-250. Then if you change any component you gotta have it reflashed every single time. For $999 its a good price for a solid system.