Tesla Dent Repaired TWO STEPS...Paintless Collision.

Today repairing a Tesla dent in San Jose California
using a unique handcrafted wood post and a fast easy two-step process. Email me for Mobile Service to surrounding cities San Jose, Near Downtown Santa Clara, San Francisco, Oakland, Mountain View, Palo Alto, Campbell, Cupertino, Los Gatos, Milpitas, Fremont, Saratoga, Sunnyvale, Willow Glen, Cambrian, Danville, San Ramon, Dublin, Pleasanton, Livermore, Union City, Newark, Hayward, Menlo Park, San Carlos, Redwood City.
Training Email Me
tinyurl.com/36...
PDR Training secretpdrpaintl...
Collision Tools
pdr-training-t...
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Trim Removal Set
amzn.to/3zE8J3x
Torch
amzn.to/3MOqXSF
Mychanic rolling stool
amzn.to/3NSPLuh
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-...
dentdiscountmo...
www.yelp.com/b...
www.yelp.com/b...

[@amanzy4015]

Absolutely love your artwork!! I definetly want to take your training 💪

[@DentDiscountPDRBodyShop]

PDR training site www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/

[@scott-adams]

Even though I've seen you do this many times, it still blows my mind. That panel was trashed! Great work, Ken!

[@DentDiscountPDRBodyShop]

Wow, thanks! Thank you so much for your comment. I really appreciate it.

[@siriusbreak2212]

You truly are an artist! This goes above and beyond standard body work. This is an art form, and you, sir, are a true master of your craft!

[@DentDiscountPDRBodyShop]

Thank you for the great comment. I really appreciate it.

[@firstnationsindian8062]

Superman, you make this look too easy.

[@DentDiscountPDRBodyShop]

First nation. Thank you for your comment. I appreciate it.

[@firstnationsindian8062]

@DentDiscountPDRBodyShop Your absolutely the best.

[@BitcoinMaxy34]

Best PDR guy in the world.

[@earlwilson9081]

You never cease to amaze me

[@DentDiscountPDRBodyShop]

Earl thank you for your comment

[@elierhernandez1]

It does not matter how many you tube videos someone watches on this. It’s definitely NOT a DIY thing. You are what they call… A professional 🫡

[@DentDiscountPDRBodyShop]

Thank you for your great comment

[@YourBestFriendforToday]

Honestly man The second step is damn near art.

[@dasteufelhund]

NOICE! It's therapeutic to see a pro at work.

[@lucacadianalbert]

incredible work Ken...wow!

[@DentDiscountPDRBodyShop]

Luc thank you

[@PD-fc3og]

Wow, you are a metal whisperer! Super job there.

[@DentDiscountPDRBodyShop]

PD thank you for your comment

[@marting7891]

Genius , .. saludos de Córdoba Argentina

[@DentDiscountPDRBodyShop]

Martin thank you for your Comment

[@DuyVu-gw8zs]

I'm new to this profession and I really admire you

[@DentDiscountPDRBodyShop]

Welcome to my channel

[@DuyVu-gw8zs]

I hope that through your videos I can learn and improve my skills. And also hope that you can share your experiences when encountering stretch marks in corrugated iron, thank you.

[@darrelkinney9856]

Cool video what about a dent in a old car or truck with some real metal ?

[@dentremover01]

Very nice Ken. Question.... How did you get the bottom part fixed, the frame crease which is extremely difficult to flatten down? I had a Tesla dent similar the other day and I heated it right up and tried pushing a blade edge whale tail bar in to try and split the adhesive but with no luck. I know it's tough bonding from when I was a panel beater and use to do door skins. Would be great for any pointers or guidance Thanks Martin 🇬🇧

[@DentDiscountPDRBodyShop]

What’s up buddy!! how are you doing Martin? I did use a lot of glue behind the scene to raise it up and knock it back down. A lot of blending.

[@dentremover01]

@@DentDiscountPDRBodyShop thanks mate. Did you literally rip it from the internal glue then? Sounds like the only option but a “balls in” approach! Loved the lateral frame too I had something similar in mind 🙌🏼

[@thomask4836]

You Truly have a gift for this ! ! ! ! !

[@DentDiscountPDRBodyShop]

Thomas, thank you for your comment

[@paulocavutto3601]

Really impressive. Congrats!

[@DentDiscountPDRBodyShop]

Thanks a lot!

[@miguelpaintlessdentremoval6601]

How manay hours or days this repair. actually I'm your number 1 fan. I am a dent technician here in the Philippines. I always watch videos so you can get a technique, idea or style of making dents. for me you are one of the master dent technicians that I admire... 👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼

[@DentDiscountPDRBodyShop]

Two twelve hour days

[@runwillrobinson]

Great work!

[@DentDiscountPDRBodyShop]

Thank you I appreciate that

[@MacGyver1908]

This is amazing work! You are a magician! 👏👏👏

[@DentDiscountPDRBodyShop]

Tesla DIY thank you for your comment. I appreciate it.

[@febswhite3233]

C'est le principe du Miracle Système mais en colle, magnifique,bravo,la colle doit être de très bonne adhérence, patience/dextérité/expérience 👍👏👏👏👏👏💯

[@DentDiscountPDRBodyShop]

Thank you for your comment. I really appreciate it.

[@geoffreycartmill7717]

Excellent video

[@DentDiscountPDRBodyShop]

Thank you

[@cfldentrepair]

Killin’ it, my PDR brother!!💪🏻

[@DentDiscountPDRBodyShop]

From you that means a lot thank you, Mr. Kelly

[@delbuxton2092]

Wow. Great job

[@DentDiscountPDRBodyShop]

Del thank you

[@chhansen9813]

You are "Da GOAT"

[@DentDiscountPDRBodyShop]

Thank you

[@20mr_show]

great man and perfect work to pdr❤

[@DentDiscountPDRBodyShop]

Thank you Mr. Show for your comment

[@In_a_state]

So much pushing and tapping to be done, yikes. Great repair, while maybe not as spectacular as heavier dents that you've posted this one is top work as well! Thanks for sharing, videos like these make me optimistic about anything being possible in life, haha.

[@DentDiscountPDRBodyShop]

Yes, you’re absolutely right lots of pushing and tapping. Thank you for your comment.

[@manuelniemann2152]

Thank you very much my Friend

[@DentDiscountPDRBodyShop]

Manuel, thank you for your Comment

[@chrisplace3024]

The man of steel

[@DentDiscountPDRBodyShop]

Chris, thank you for your comment

[@victorr.leclerecreyes7869]

No cualquier técnico es capaz de aceptar un trabajo asi ni tampoco es capaz de dejarlo con esa terminación en ese tipo de vehiculo. Con herramientas basicas. Mis respetos. 💪💪💪💪💪

[@DentDiscountPDRBodyShop]

Victor thank you for your comment

[@MrSzopenspn]

GOOD JOB 😊

[@DentDiscountPDRBodyShop]

Thank you

[@PedroCarreon-y3q]

Is it possible to share the cost of every repair? It would be very informative. Thanks man if Steele.

[@vgotishan3234]

Great job sir. Love your work. I still a long way to go😊

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@craigsmith4419]

As always. Boom!

[@DentDiscountPDRBodyShop]

Craig thanks

[@SW-mk6cz]

Awesome - looks better than out of the factory 😂

[@DentDiscountPDRBodyShop]

SW thank you for your comment

[@Adam-cp3wv]

Beautiful work! How did you get rid of the small outward dents?

[@DentDiscountPDRBodyShop]

Adam, thank you for your comment. Once I pull the dents the high points disappeared after I knocked him down.

[@bummwear4635]

Im curious in what glue you used and the key to keep it sticking so well? I bought a mini kit with the black and yellow glue stucks with a slide hammer, it comes right off the second or third slam. I see you really putting some weight on those tabs and it seems to stick so well.

[@deltajohnny]

Awesome! 😍😍😍

[@DentDiscountPDRBodyShop]

Delta Johnny thank you

[@javybeaz3236]

The man that Steals is BACK

[@DentDiscountPDRBodyShop]

Thank you for your comment. I have 35 new short videos as well. You can check out that are new.

[@javybeaz3236]

@@DentDiscountPDRBodyShop still the best PDR tech on KZbin ✌🙏💪

[@Gurule]

This is like 100 steps. But you did a good job explaining.

[@DentDiscountPDRBodyShop]

Lol Thank you for your comment

[@ОлександрОлексенко-н7и]

Good job How much did you estimate this work?

[@DentDiscountPDRBodyShop]

3-5K if it’s slow or or if a customer cancels just to fill the spot I’ll charge 3K and that’s what I did on this one

[@A-wn3ws]

Good afternoon to the best of the best! What state are you in? How much does your training cost?

[@smokegonzales2605]

Great job as always

[@DentDiscountPDRBodyShop]

Thanks again!

[@Swenser]

Would be good to see more detail when knocking down and using rods. The shapes of tips applied to surface and motion and force used. Get some close ups and dont rush through that part as its the most finicky and important. I feel confident to pull a major part of a dent easy enough but the finishing looks much harder.

[@Ramblingpete]

You guys are magicians 👍🏿🤪

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@Hertog_von_Berkshire]

Good job! Those wrinkles looked like they might be trouble .... but hey!

[@DentDiscountPDRBodyShop]

Thank you for your comment. Yes, the wrinkles took a lot of work to flatten out and smooth. I appreciate you sharing on my channel

[@dsan2509]

Impressive 🎉

[@DentDiscountPDRBodyShop]

David thank you

[@tombo7719]

Do you have a go to set of pulling tools to start? Any real recommendations on it would be appreciated if you don't mind. Thanks!

[@DentDiscountPDRBodyShop]

Go through all my videos you’ll learn a lot. Thank you for your comment

[@tombo7719]

@@DentDiscountPDRBodyShop I WILL, but do you have a certain brand of tool/kit you would recommend?

[@eskayler66]

Amazing!

[@DentDiscountPDRBodyShop]

Thank you

[@SammieHence]

I'm new to this can you pull a dent outt spare trie well with a lager dent and crested Pull out the back with all the dent

[@player4741]

Your work is sooo good How much time did it take?

[@DentDiscountPDRBodyShop]

Thank you for your question two days

[@marciomartelinhodeourobelm3776]

I miss your videos my brother🇺🇸🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

[@DentDiscountPDRBodyShop]

I have another one coming soon. Thank you for your comment.

[@derekholmes4792]

How do you avoid oil canning? Great work

[@DentDiscountPDRBodyShop]

If the dent is pulled wrong, that’s how you get the oil Can

[@markphilippsjr]

Very complicated pull... nice

[@DentDiscountPDRBodyShop]

Mark thank you

[@alirahman4762]

wondering the time for this repair

[@DentDiscountPDRBodyShop]

2days

[@andrewwturner]

Impressive. How many hours did the repair take?

[@DentDiscountPDRBodyShop]

Two days thank you for your question

[@cainsworld1958]

Boy do I have a test of your skills! Can’t post pics but if you can fix this aluminum body you will probably get huge amount of views

[@Вячеслав-щ9с9э]

Великолепная работа

[@DentDiscountPDRBodyShop]

That you for your comment

[@practicallifesolutions-py5es]

Hey brother. I am new to the channel. Much respect to what you do - pretty awesome! I got a dent on my truck that I am "puzzled" with. Is there a way I could get an advice from you on what to start with and "which way" to pull?

[@DentDiscountPDRBodyShop]

Email me let’s see what you have

[@mohamedalali5931]

Man of the steel ،💪

[@DentDiscountPDRBodyShop]

Mohamed thank you

[@yb8346]

Great work! what glue do you use?

[@DentDiscountPDRBodyShop]

Thank you for the question Glue I use pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/

[@dasteufelhund]

What kind of glue did you use? For some reason the glue I use is not holding on

[@johncampos1780]

Good work, waiting for the repair on that Rivian. He's got like $50k in damages.

[@DentDiscountPDRBodyShop]

John, thank you for your comment.

[@100rubenaragones]

would like to look a you wood post do video on it and give dimesons, thanks great video

[@DentDiscountPDRBodyShop]

Thank you for your comment. I will see what I can do.

[@mikaso20042000]

Good Job,only thing left Is that some good painter spray your "paintless repair,,"30 years ago what you Are doing was called panel beater.

[@DentDiscountPDRBodyShop]

You are absolutely right thank you for your comment

[@mohamadnorbaxsh]

🔥🔥

[@DentDiscountPDRBodyShop]

Thank you

[@dregonzalez6815]

Are you not able too do dents tht are paint chipped is tht projects you don’t get must be painted if dent creats a chip

[@SBanderaB]

wow

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@tmjr1986]

New subscribers. Can you tell me what glue do you use i goin to try my first pdr 😮

[@DentDiscountPDRBodyShop]

Glue request pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/

[@gideanhofer1146]

How long did this take 🤯

[@DentDiscountPDRBodyShop]

2 days

[@tombrady5590]

New subscriber. Where are you located?

[@ddoherty5956]

I would have to take all the ritalin un the world to have that much focus and attention to detail 🤣🤣🤣🇬🇧👍

[@DentDiscountPDRBodyShop]

Yes, it’s hard for me to focus and stay in one spot too. I have to take a break occasionally. Thank you for your comment.

[@arkadiuszprichoda5319]

Dobra robota mistrz !!!

[@MrSzopenspn]

Szkoliłem się u niego 😁

[@DentDiscountPDRBodyShop]

Right on

[@JohnMurphy-dw6ml]

How long did that job take?

[@DentDiscountPDRBodyShop]

I’m slow 2 full days

[@cwejter]

Is there any good garage like this in Ontario?

[@DentDiscountPDRBodyShop]

Google Paintless Dent Repair read the reviews

[@cwejter]

@@DentDiscountPDRBodyShop fair enough, thanks. I got an audi q5 that I bought after accident, I repaired it myself, but there's still a big dent under the rear left light. I was thinking about replacing the whole trunk gate, but it's not worth it at this point.

[@victorgonzalez1331]

Cuanto tiene de real y cuánto de fisión?

[@DentDiscountPDRBodyShop]

Thank you, victor

[@CorvetteGuy423]

Since this is a Tesla, is that an Aluminum gate?

[@DentDiscountPDRBodyShop]

Steel my friend thank you for your comment

[@mohanprabhu4120]

Where can I get this repair kit

[@DentDiscountPDRBodyShop]

Here you go pdr-training-tools.com/en/products/glue-pulling-kits-(gpr)/162/pdr-tech-kit/

[@mohanprabhu4120]

Thank you

[@patgovender7192]

new subscriber

[@DentDiscountPDRBodyShop]

Pat welcome to my channel

[@Ramblingpete]

Did you get that chain from mr T 👻just asking

[@DentDiscountPDRBodyShop]

Love it

[@talatozmusluman]

Do you have any friend or shop in NL?

[@DentDiscountPDRBodyShop]

Sorry..you can google pdr in your city

[@shiran5165]

❤❤❤❤❤❤ good

[@patrickp086]

Respekt!

[@DentDiscountPDRBodyShop]

Patrick, thank you for your comment

[@lawabidingman84]

🔥🔥🔥🔥🔥🔥🔥💯

[@DentDiscountPDRBodyShop]

Thank you

[@andrewryabchenko2407]

Unbelievable

[@DentDiscountPDRBodyShop]

Thank you

[@billmea5593]

Almost too good to believe, almost like you swapped vehicles

[@DentDiscountPDRBodyShop]

Bill Thank you for your comment. I appreciate it.

[@adnanyelmer4811]

Dostum nerelerdesin?

[@DentDiscountPDRBodyShop]

Thank you I appreciate your comment However, there’s a language barrier

[@jimcole2648]

I would not want that to come undone and fly in my face.

[@DentDiscountPDRBodyShop]

Laugh out loud. Thank you for your comment. My glue never comes off. I have to heat it and run alcohol to get my tabs off.

[@JamesCole-nh1bh]

@@DentDiscountPDRBodyShopGlad to hear that has not happened. Knock on wood that it doesn't. I dont want to see a video of bloobers. keep up the work. 👊👊👊

[@melomotores]

Show.

[@DentDiscountPDRBodyShop]

Thank you for comment

[@_._._._._._._._]

Easier to just replace the panel.

[@DentDiscountPDRBodyShop]

Customer prefer to keep it original, including the paint.

[@RickyZhao-us3py]

😂

[@DentDiscountPDRBodyShop]

Thank you

[@jf5154]

This one was a mess

[@DentDiscountPDRBodyShop]

It was fun and messy

[@РусланДавлетханов-ч5к]

Allen Paul White Timothy Anderson Sandra

[@alfa757]

Bhooo vai in demolizione e lo sostituisci con metà del tempo e dei soldi....

[@DentDiscountPDRBodyShop]

Thank you for your great comment. That’s what most shops will do. You’re absolutely right.

[@rayRay-pw6gz]

They invented body filler for a reason . Most vehicle owners do not care.

[@DentDiscountPDRBodyShop]

People do care when their body filler cracks and their paint pops off. Thank you for your comment Ray Ray.

[@giorgioajr]

tezla, scammers, give me back my money for not delivering the vehicle to me and for scamming me out of the costs of accessories for this scrap metal, I will advertise for you until I get my money back and by the way, this happened in February 2022

[@DentDiscountPDRBodyShop]

Thank you for your comment. I appreciate it.

[@ThatOneGuyWithTheEye]

But.... its still all dented to shit. Just much smaller dents now.

[@DentDiscountPDRBodyShop]

Thank you for your comment

[@KrzysztofPłachciński-v3h]

Bzdura na resorach...

[@DentDiscountPDRBodyShop]

Did you say Happy paying customer on this repair.

[@fredf4562]

Awesome job!

[@DentDiscountPDRBodyShop]

Thank you Fred