Testing Minelab modified and boosted metal detectors at the test site.

[@RockAndOre]

Great vid. I would like to see if you'd get the same result if you left the target in place and swing the coil over it. I feel like the ground noise would mask the target a lot more than it does when you hold the coil motionless.

[@tbenedict6335]

Thank you for the time and effort.

[@melbournesubtropicfruits9474]

Nice part 1 but you need to do an UnModded unit as a base measure too on same day? Cheers

[@gideonvella6361]

Hi woody just asking did you get a chance to look at the nokta makro deep hunter let me know if you need anything

[@DetectorMods]

I have only had a quick look, I will get onto it this week.

[@gideonvella6361]

@@DetectorMods ok let me know if you need a new battery or you can remedy that . Main issue is coil error and hard to ground balance thanks woody.

[@melbournesubtropicfruits9474]

Must say my GPZ7000 Sounds off almost 2mt from an Aluminum can - i do just to hear the warble

[@peterjasperson338]

2mt under the ground Get a grip mate That wss a buried car not a can

[@DetectorMods]

@peterjasperson338 lolz

[@melbournesubtropicfruits9474]

@@peterjasperson338 On the Surface der walking up to can 😜

[@tonybaker7242]

I would like to see the modded 6k in the test if you could please .

[@spartanjim]

hi woody i have a mod f1a4 minelab are they any good, im usin sady coil but thinking buying evolution 14x9 need some advice.

[@DetectorMods]

The F1A4 is really made for very small targets,even though it will work with a larger coil it will not give full depth on larger targets.

[@machinadiabolika]

The coil remains fixed There is no sound of the floor effect it's easier..

[@chipsettt1]

the test is not correct. you need to move the sensor, not the target.

[@JenkinsUSA]

I agree, moving the sensor will cause interaction with the ground causing false positives. Also it would be useful to explain what is in each pipe for the video. 15:16 I hear a lot of noise with the sensor in the air. In fact, how in the world could it find anything? It seems like you would end up digging many holes. I also understand this process is complicated and technical, but as a person interested in this technology it really doesn’t seem more reliable than dowsing rods as presented. Keep on improving and best wishes. ❤️

[@sauddammam3389]

This is a mistake because normally the target does not move...what moves is the dish

[@DetectorMods]

It is not a mistake it is a compromise due to the circumstances of the test site.

[@Hungry_Hunter]

Maybe a bit more detail in the testing process. Some unmodified baseline tests ,then use the modded DT otherwise it all just looks like a well intentioned shambles.

[@bencamilleri9639]

Only problem is it's a waste of time using alloy can you should only be using nice couple Oz nugget of gold it's not going to be even half that easy to pick gold up if you really been detecting 40 years you should know not to use anything else but gold 😜

[@DetectorMods]

Can you lend me a 10 pound gold nugget?

[@ابووله-ج5ف]

Hello my friend You seem to make fun of your followers when they speak the truth This is not respect at all

[@DetectorMods]

There are many opinions, some good and some bad.

[@rfbftp123]

Not very scientific experiments lol

[@DetectorMods]

It’s not a laboratory.