Testing out the 15 hp wood chipper from Princess Auto

[@billd5361]

Can’t get started from new. Have some spark, but doesn’t seem consistent. Any thoughts?

[@ByTheGraceOfGod316]

Hi, @billd5361. There is a low oil switch and it doesn't come with oil. That's where I would start. There is also the panic bar and door open switches that will keep it from starting. Try those as well.

[@billd5361]

@@ByTheGraceOfGod316 Thanks for the reply. I did add oil. The panic bar and door switch seem to operate, or I think I wouldn't get nay spark at all?

[@ByTheGraceOfGod316]

Hi, @@billd5361 . Weak or intermittent spark might be a bad plug, or maybe slow rotational speed. I find mine is heavy to pull start and needs full choke even when warm.

[@billd5361]

@@ByTheGraceOfGod316 it was a faulty oil switch out of the box. bypassed it and it ran first pull

[@inthebackyardwithdel438]

The chipper worked very well and is a nice addition to your line of equipment !!!

[@ByTheGraceOfGod316]

Hi, Del. Yes, it has and will be very useful, if I can find a place to store it.

[@L46C3]

I know the manual called for a specific amount of oil but there was already an unknown amount in there. The left side access had a dip stick. If it didn't register I would have added enough until the dip stick read correctly. EDIT - Notice on the oil fill instructions it stated "insert the dipstick into filler neck WITHOUT screwing it in". Some manufacturers require it to be screwed in. Check your manual.

[@loggerjohn01]

It seems to work very well! An electric start would be nice. Thanks for sharing.

[@ByTheGraceOfGod316]

Hi, LoggerJohn. Yes, an electric start would be nice, but there is no way to add one. There is no mounting hole and the flywheel doesn't have a ring gear.

[@deangpowers8256]

Good Day My Friend.....Looks Like it Works Well.....Greetings From N.E. Vermont

[@ByTheGraceOfGod316]

Hi, Dean. You are correct, it does work well. Greetings back at you from Canada.

[@naturundhund]

Top.... Greetings from Germany Peter 😎👍

[@ByTheGraceOfGod316]

Thank you for watching and commenting! Greeting back at you from Canada!

[@naturundhund]

@@ByTheGraceOfGod316 👍👍

[@topher12661]

Make sides higher on trailer and modify out shoot to flow better. Nice informative video.

[@ByTheGraceOfGod316]

Hi, Topher. Thanks for watching and for commenting. Yes, I have modified the out feed shoot to better direct the material. May you have an amazing week!

[@Smith64000]

Thanx, now i want one to

[@ByTheGraceOfGod316]

Hi, Smith64000. They are well worth the money, if you need one. They come on sale fairly often. Have an amazing week!

[@dmitrytitenko1277]

The chips that are formed as a result of chopping branches are used somewhere or is it just to remove excess debris from the forest?😊

[@ByTheGraceOfGod316]

We use them in our vegetable garden and on our bush paths for weed control.

[@dmitrytitenko1277]

As I understand it, the forest area is not far from the house, since the tractor is clearly used for short distances with a double trailer?)😊

[@ByTheGraceOfGod316]

You are correct. The bush is about 30 metres from the house. You can see it in some of the videos.

[@buckdangt3343]

Nice B12 you have there

[@ByTheGraceOfGod316]

Hi, Buckdangt3343. Good eye, but it is actually the hydrostatic version: B112. It has been a great tractor. Sadly, they just don't make them like this any more. Thanks for watching & commenting. Have a glorious week!

[@ChrisBailey-dk7tt]

Very useful video

[@ByTheGraceOfGod316]

Hi, Chris. Glad you found it helpful. May you have a wonderful week!

[@dmitrytitenko1277]

like came from Russia! question ? Is this branch chopper really so necessary to buy and keep it on the farm .. tell me my friend the name of the tractor that transports the chopper knew if I knew this brand during

[@ByTheGraceOfGod316]

Yes, the chipper is necessary, because we cut down a lot of dead trees. We need to do something with the small branches and you can't burn them without permission from the local government.

[@ByTheGraceOfGod316]

The tractor is an Allis Chalmers HB112.

[@dmitrytitenko1277]

I want to know how much horsepower this gasoline engine has and whether the engine needs to be run in before using the question

[@ByTheGraceOfGod316]

It is a 15 hp engine, and the manual does not say that it needs to be run in. It had some oil in it when I got it, so I think the factory does the run in.

[@rhinocerous98]

Would you recommend one of these, im looking at one today

[@ByTheGraceOfGod316]

Absolutely. They are a joy to use. Do your first oil change at less than 2 hours run time.

[@rhinocerous98]

@@ByTheGraceOfGod316 Thanks so much.

[@ByTheGraceOfGod316]

It doesn't come with assembly instructions but I did a video showing how it goes together. There are some tips and tricks in it that others have found helpful. kzbin.info/www/bejne/qJ_TYpiYZdpjbMk

[@jakewollman6340]

Put 5 branches in at one time not 1 that machine Will take a 6 inch branch lol😊

[@ByTheGraceOfGod316]

Hi, Jake. I would, but my hands won't let me pickup that many anymore. Thanks for watching and for commenting. May something truly amazing happen for you today!

[@dmitrytitenko1277]

The branch chopper is made in Canada or China lol😊😊😊

[@ByTheGraceOfGod316]

Like everything these days, it is made in China.

[@willglueck3156]

👍

[@ByTheGraceOfGod316]

Back at you: 👍. Thank you for watching and commenting.

[@toro220d]

It looks like it's A DK power knock off

[@ByTheGraceOfGod316]

Hi, Toro220d. I wouldn't doubt that it is. Everything seems to be a knock off of something else these days. Thank you for watching the video and for leaving a comment. Have a glorious weekend!