Testing the DIY BamBoo Darts Maker - I Failed!!!! Ah!!

[@TinyToastandJam]

Interesting results. Doing the science for us as always, you're a legend tungsten.

[@TungstenEXE]

Thank you Taylor!

[@whostheplum1711]

Ooooh nice to see more videos by more creators on their experimentation with some of the clever designs from the community. But yeah been wondering if I should get one of these. Thank you!

[@TungstenEXE]

Thanks for the support

[@bilalrateb8669]

Great choice that you will make a listing video about sweetheart because I no nothing about it but the phalanx I know everything,so thank so much 🤠😁

[@bilalrateb8669]

To find the product in taobao type that in taobao Sweetheart甜心 犇犇海绵软弹玩具本品不包含弹匣 😁

[@bilalrateb8669]

Know*

[@bilalrateb8669]

I'm so excited for the new video every video it gets better and better and more creative

[@TungstenEXE]

Thank you :)

[@Matt-md5yt]

You tried it out and that matters. Anyways great video

[@TungstenEXE]

Thanks Matt :)

[@tomdongerson1474]

How long and how hot is the heat you’re applying to the mold? Like a hair dryer or a heat gun?

[@TungstenEXE]

I used a hair dryer, not very long, maybe maybe around 2 min.

[@tomdongerson1474]

@@TungstenEXE just around the sides? Or did you do the tops and bottoms aswell?

[@TungstenEXE]

@@tomdongerson1474 I did the top and bottom as well

[@1SweetPete]

I wonder if your chronograph is set up to register two different signals and the geometry is messing with that, or whether it might be the brightness of the room. Either way the heat keeping the shape better is a valuable and interesting discovery

[@TungstenEXE]

After making the video I tried offing the strong lighting and the result is still the same, i think the geometry maybe bounding off at angle and messed up the readings 😆 time to source a better chronograph 🥲

[@vader540is]

@@TungstenEXE please make a video when you get your new chrony

[@TungstenEXE]

@@vader540is I saw some chronograph, they are expensive, ahhh, I will look ago to source for one.

[@hiitskino9887]

Very nice video! Any chance you can make a video on the accuracy of the new darts and the DIY darts?

[@TungstenEXE]

Thank you 🙏 I may not be doing accuracy test as I don’t have a good setup to film those video, also I have a few more parts coming for the swift, want to do those first, maybe in the future when I figured out how to have a good setup. So far from my personal firing, the black darts works great with the 1.6 spring in Swift

[@eleanordawes8634]

700 fps swift how I wish that was real and not a chrono error

[@TungstenEXE]

LOLOLOL

[@bigbraingametime2085]

I hope we can buy black worker darts in Australia soon

[@TungstenEXE]

Is blastertech from Australia? They might carry it.

[@bigbraingametime2085]

@@TungstenEXE yes BT are Australian but they sadly don't have black worker darts yet

[@Makotosaber]

Try the original bamboo, see if the results are similar.

[@TungstenEXE]

Unfortunately I do not have and do not know where to get the original bamboo, worker came up with their own version of bamboo, will be nice to compare