Testing ThorroClean rifle bore cleaner

Check out my website www.fclassjohn.com for more videos, reviews and help
Join Patreon / fclassjohn for full length videos, live chats and more.
Help support my channel by shopping Amazon amzn.to/35YA4h8
DISCLAIMER: This and all videos on my channel are not meant or intended to be viewed by anyone under the age of 18. This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including KZbin) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above. #fclassjohn #reloading

[@davidberlinski7252]

Been using this stuff for a while and really like it. The only negative thing I can say about it is the packaging. I wish they had different style tops on the bottles. The stuff seems to go everywhere but where you want it.

[@rossmccollum61]

David - I agree the top is also my only criticism of Thorroclean. I use a PMA Bore Guide and the flip top is not conducive to pouring the solution into the bore guide slot. I have gone to putting the solution on the patch (like John) before inserting the rod into the bore guide.

[@DanielReyes-hz1qk]

I hate those pop tops and have 4oz twist top bottles I keep on hand for those products that come with those

[@stevenmartek6221]

Agreed....different tops would be great..... excellent product!

[@danielfinke6677]

I’ve been using for about 6months. Thoroclean is the absolute best and fastest system I’ve ever used.

[@kenbell8752]

Thanks John, this video was very timely. I have been cleaning a 223 and 6.5 CR with both these products for quite a while now. Both rifles were very heavily carboned up. So far I am at about 15 cleanings on each rifle, running 10 patches wrapped around a nylon oversize brush with ThorroClean on it. I typically do 15 or 20 strokes with each patch, so around 150 strokes per session. The patches are still coming out black! I think I am nearly done on the 223, but the 6.5 CR is still showing a lot of carbon in the grooves. Not knowing any better, I did not try addressing getting the carbon out for nearly 1500 rounds in each rifle! D-oh!!

[@jimdavis1124]

I have been using ThorroClean since I watched someone use it in a You Tube video. At first I used it as instructed. I realized that I was using more ThorroFlush than ThorroClean to finished the cleaning process. My primary cleaning solution for years has been Shooters Choice MC-7 bore cleaner. Montana Extreme bore solvent when necessary. I start with 3 or 4 patches of Shooters Choice. If the last patch is somewhat clean I unscrew the sharpened Parker Hale jag with the jag sticking out the front of the bore. (My first use of the brush is always pulled through the bore) I replace the jag with one of the IOSSO brushes and load the brush with the ThorroClean and draw it through the barrel and then back out the front of the barrel 1 full stroke. After 20 full strokes I reload the brush at the muzzle. (It doesn’t load up the bore guide) If the barrel has fired a lot of rounds I will repeat the process 1 or more times as necessary. 20 to 40 strokes usually cleans the barrel completely. I clean out the ThorroClean with the Shooters Choice. It works well for me. As you, I check my results with my Bore scope. I have started storing my ThorroClean bottle on its side so the solids don’t end up in the bottom of the container. It becomes easier to mix it. I shoot bench rest center fire and rimfire in competition. Thank for the good video. JD

[@patrick6087]

Thanks for the video and insite. I have a borescope but I didn’t always know what I was looking for. I had unexplained barrel speed up and found a significant carbon ring I wasn’t seeing. It’s gone now! Many thanks.

[@chrisjconner1]

Great review John. Thank you

[@Highway_95]

Thanks. Ordered today based on your video.

[@abitnutz6747]

I've used it before and liked it more than anything else...liked everything but the price. You get so little for what it costs. However, 20% off makes it a little more palatable. Thanks, John.

[@hank3152]

Been using them for a while and they work great

[@michaelnovotny1170]

Really good content thanks

[@anthonybarraballtheflash7055]

Thorro clean is awesome, pls try a brass brush, wet liberally and see the difference. Using this for a few years now. Awesome stuff.

[@rustynut1967]

I'll have to give it a try when I get low on bore tech. 👍

[@Redacted-Arms]

I have been using Thoro clean, as I hate cleaning. I like it because of how clean how fast it gets stuff

[@albertkwittenberg4113]

Finally... someone dares to show using Non-Chlorinated brake cleaner. Good stuff. I use it in the shop as well as on my guns. Works better than alcohol or acetone. Need to be careful of the over spray tho. This video came at a perfect time as I am currently experimenting with different cleaners. So far Bore Tech and KG are the best for me. Thanks to you, I think I'm gonna try this product, so the code Clean 20 will come in handy. Great video and Congrats on you'r success. Thank You John. 👍

[@FClassJohn]

Thank you and yeah, I like the NC Brake cleaner. I was a little heavy handed in the video and couldn't find the tube for it when I was making the video. Normally I'd have a tube on it to direct it better.

[@Caohu09]

I just use everclear.

[@LanceX-hv3gr]

@@Caohu09 I'll drink to that....🤣😂

[@thebryguy96]

I am just starting my third bottle of the thorroclean products Great stuff. I also like boretech eliminator and carbon cleaner. Another product whicb is basically the same as thorroclean and which has been on the market over 15 to 20 years is witch's brew from holland guns. It has a white paste mixed with a solvent also. I've used 4 to 5 bottles over the years. A few tricks for using this Thorroclean: Put a steel nut, short bolt or ball bearing in the bottle of the cleaner to mix up the white grit as it will emulsify the product much faster. I also like the isso brush or the stiff brushes from brownells. Use a caliber specific nylon brush and short stroke the first 3 to 6 inches of the bore like 5 to 6 times for every full pass you make. I also use a boretech pointed jag or a tcs rubber o ring jag with a round or square patch. Use a size which creates a tight fit, but loose enough you can also short stroke it. I put a bit of the flush on the patch first and then add the white cleaner. You can also wrap the nylon brush with a patch but i prefer a jag. I use 2 cleaning rods also. 1 with the jag and 1 with the brush. And after each session of stroking the bore, wipe off the rod wifh a shop towel. I typically clean the chamber/throat carbon ring with a 1 or 2 sizes larger than caliber brush and spin it and short stroke it using a chamber rod which is much shorter than a cleaning rod. Remove the bore guide to do this process. When using boretech and other none abrasive cleaners generally a bronze brush is better than a nylon one but i use both and short stroke the first few inches of the barrel with the nylon brush and always finish cleaning wjth a nylon brush as a bronze brush will show a false positive for copper and the patches will keep comimg out bluish green. I clean the brush after using through clean with alcohol or an aerosol gun cleaner ot brake cleaner like you do. I also use a patch catch from mtm instead of the old powder jug. Either works but they are critical to avoiding a mess. After cleaning and after flushing the bore with thorro flush on a patch, i sometimes use a patch with boretech eliminator as it's very safe in a bore, but i think the flush is safe for the barrel also. For storing the rifle i will push a patch down the barrel with bore conditioner oil from hollands or something similar. I then clean/dry the chamber with a bore mop or a 375 or 416 nylon brush with a 12 guage patch on it. Clean the solvent in the muzzle brake or barrel end with shop towel and or q-tips. Finish the barrel with 2 dry patches on a jag or wrapped on a clean nylon brush to remove any solvent from the chamber and to remove any bore conditioner oil. Having an oil and solvent free bore is critical. Leaving a 1 or 2 size larger than caliber brush, on a chamber rod, with a 12 guage size patch over it, soaked in a carbon remover like boretech or kg carbon remover for 15 min will also remove a carbon ring. Too many people don't clean their chamber and throat well and its critical to dry the chamber as stated above after cleaning the bore. A baked in carbon ring us very difficult to remove if a shooter has neglected cleaning correctly. For people shooting suppressed, always remove the suppressor before cleaning and make sure to dry/swab all holes and grooves when using a braked rifle so the solvent doesn't run back into the barrel. A bore scope is critical for inspection of the barrel during and after cleaning. I use a lyman but the new teslon scopes look better. Which model do you like the best and do you recommend the straight shaft or the one that coils up? Your vids are some of the very best on youtube. Thanks for your advice, equipment testing and honest assessments.

[@LanceX-hv3gr]

Very interesting information on cleaning procedure. I will be adapting a few ideas you have presented... I too, have been a big fan of Boretech products and have recently gotten onto their C4 Carbon Remover Solvent and found good results and have used JB Bore Paste and Boretech CHAMELEON GEL. Will most likely give this product a try as I am eternally searching for better cleaning products and of their ease of use. Definitely dry out any Boretec Eliminator or Cu+2 if using them in a Non Stainless barrel and put down a patch with some sort of oil such as their Shield RP as the Eliminator & Cu+2 will cause rusting in a regular barrel if left for any time... 😦 Also wash your nylon brushes {dish soap and hot water} as the stuff will rust the wire that holds the bristles.. To comment on your question of the bore scope, I use the one with the flexible cable as I just carry it with me at all times, compact in it's own clam shell box with the assorted size tips. I often get asked at the range to "Have a Look" at other shooters rifles... Carbon is a big factor in many that I have seen.

[@thebryguy96]

​@@LanceX-hv3grgreat info and insight. Thank for sharing your thoughts.

[@DMOUA_OUTDOORS]

Great video John. You'll end up using more of the thorroflush. I recommend buying the bigger bottle.

[@ericmccowen5599]

Great video John. I’ve been using it for about 6 months. It’s good stuff. Cuts way down on cleaning time! And I also go oversize on my brush.

[@turckskidoo]

Thx John,just ordered some with your code.

[@FClassJohn]

Thank you, I hope you end up liking it as much as I did.

[@rbowlin93]

@@FClassJohnJohn, is the velocity shift after cleaning anything like with Iosso paste? Thanks for another great video.

[@ChristianoMoe]

21:27 Me too, John... Me too :)

[@FClassJohn]

😉

[@xxshiftlockxx]

I'm still trying to decide my final method but I've been bouncing back and forth between using a nylon and brass brush, but I'm wrapping a wetted patch around the brush. I've noticed this really speeds things up and cleans up the mess a lot faster than just putting the Thorroclean on a bare brush. I shoot a 6.5 prc and it's 100% of the time suppressed, so it gets even dirtier than what yours's looked like at like 50-75rds. This is by far the fastest most effective cleaner I've ever used. I think I might make it my main cleaner now and just stop using Boretech products, which are really good... but like you said time consuming.

[@tonydevich7937]

Nice!

[@Forumrida38621]

I have been using thorro for about a year and half i think with the iosso brushes and man it really is the best stuff i have used sometimes ill use paste in the carbon ring area if its being really stubborn but ya love this stuff

[@davidpool8796]

I think the best cleaning product to come out is the digital bore scope. No matter what products you use, if you can't see it you can't clean it. My first bore scope taught me that. I'll try it

[@CorwinBos]

Great and timely video John Ive been considering giving this stuff a try as what Im using right now isnt working the greatest and takes alot of time.

[@FClassJohn]

Glad it was helpful!

[@NowellGreasley]

Thanks for the video… I have been running Thoro clean for a couple years now and have gravitated to using a copper brush for stubborn carbon in the throat area. I also have experimented with an oversized Iosso brush with the Thoro clean and a small amount of JB bore paste for stubborn Carbon. Flush with rubbing alcohol after Thoro flush. Velocities have been consistent on 4-5 barrels now. 3-5 fouling shots and go shoot.

[@grantbrittain2774]

I've been using the thrro clean stuff for a year or more.. in my opinion its the best stuff out there to clean a barrel.. and I've tried about all of them.. i also use the iosso brushes as well.. but after putting a couple wet patches of the flush through it i then take the iosso brush and dip it in the thrro clean bottle till the entire brush is submerged.. then go to town on the barrel.. doesnt take long and im back to bare metal.. i also use a caliber specific brush.. it removes the carbon ring also..

[@jerrysepulveda]

First off I love your videos. Always fun and informative. I have used ThorroClean for a while and love it. I use other cleaning routines but for the most part I go to ThorroClean. One tip I really picked up on was the oversized brush, especially for the carbon ring. My question is off topic. I would like to know what bench lights you have in this video. I have pretty good eye sight at a distance but up close as I have gotten older I need a bright light. Please let me know the brand and model. Thanks.

[@LanceX-hv3gr]

Another interesting video John, I have to ask, where do you get the stock protector? Is is something you have made or a manufactured product? I use a bit of plastic sheet like an old shopping bag but your item looks a lot more versatile. This after finding that some bore cleaners are tough on finishes...! An idea might be to run a comparison test with several products that are on the market and see how they compare. Perhaps JB Bore Paste, BoreTec Chameleon Gel & IOSSO Bore Cleaner..? I do like the Bore Smith patches myself and first spotted Eric Cortina using them and chased them down after a bit of searching as I did not have the name of them at that time.

[@rossmccollum61]

I have used ThorroClean off and on for over a year and it works great on my 6PPC. I say off & on, because as a novice Bench Rest shooter I am trying different products. However, in my experience after throughly cleaning with other products a followup patch of ThorroClean concisely cleans out additional carbon. I ordered, with your 20% coupon (thanks), several more cleaning kits and a 354ml of the ThorroFlush, as I use the Flush much faster than the ThorroClean Bore Cleaner.

[@dhooter]

Dang. Guess I should move on from my handed down Hopes supply from the 50's lol. But I love the smell. Reminds me of Pa deer camp.

[@williamsweet7511]

I've been using Ioso for a while, maybe 6 months and it works great, so great that I find I need a few fowlers for sure. I usually give it 2 to 5 shots and then it's good.

[@Palma_Rebel]

John, great video and barrel cleaning is provably a topic that is most often missed out with a presumption that everyone knows what they are doing. A couple of things I picked up on that I'd like to ask you about: Clean (dry) patches. Your first one was not what you expected but do you think that it was residual from the bore guide? The bore guide ' shouldn't ' allow any product to seep into the breech when pushing or pulling a rod attachment where the guide meets the barrel, how often do you check for seepage creating a fluid build up after barrel cleaning. Would you consider covering the breech in another video? Thanks again, very informative!

[@frankthetank9741]

I need to try this on my 300 wsm 👀

[@ronporter1017]

Works for me just like it did for you. Hate the caps, but the Brownell's bottle flip lids fit fine. A word, you got to shake it REALLY well, it settles in the bottom really thick. I store it on its side so it mixes quicker.

[@FClassJohn]

Yeah I've moved it into twist top squeeze bottles and it's so much better for sure. I have nuts inside my bottles to help shake it better too.

[@sjcrw]

iosso bore paste or sharp shoot r all works wonders. I've been trying to clean my 223 varmin for years, but even after patches after patches of hoppes 9 still came out dark. so normally I clean for a while then gave up. Normally people watch cleaning videoes and just to learn how to do it, but IF you don't have a bore scope, then don't worry. Because If you don't see it, the dirt won't bother you! I saw a video by speedy or one of the F class guy using Iosso and sharp shoot R, they work wonders. Now I just use hoppe 9 to wet the barrel, then soak with iosso or wipe out. wait for next day, then it's done. so much easier. At the end of the day, those cleaners all work better than the normal off-the-shelf stuff. more or less they prob are very similar anyways. so buy whichever cheap for you, then enjoy. if one product works, and get your barrel clean, then there is not much point keep chasing the newer stuff. spend more time and effort on reloading, finding deals, testing new load.

[@fifd5]

If you are using a paste especially with a brush, you may wear the rifling edges smith and take a .005-.0015” out if your barrel. You will effectively loose accuracy.

[@jamesmccauley8226]

would love to see a long time study on this process, it is an abrasive cleaner and wonder about barrel life with regular use. Barrels don't last all that long as it is, don't want to shorten the life span any more than i have too.

[@jwschroeder804]

I appreciate your no-nonsense, get to the point (most of the time😂), limited bias videos, John. Since I live in the same community as Bullet Central I am well aware of their high end products. In fact I build my first ever custom rifle through them last year. That is how I learned of and tried ThorroClean. I like the product and it seems to work as good as any of the 4 other cleaning systems I am trying. However, I do not get the results you did , including Iosso. But then again I never exceeded 40 brush strokes or considered an over size brush. The carbon ring is not so much the challenge, but the copper in the last 10 inches of the barrel of the rifle of interest here (not the custom I referred to). I’m not seeing the sheen you revealed either, so wondering if you can make any recommendations…..in addition to the video suggestions to double my brush strokes. Noteworthy, or not, the tight dry patch gets so tight at the copper laden area, the jag pushes through the patch, so I have to withdraw the cleaning rod and use a dowel to punch it back. Would you use a bore polish? How about let it set and soak longer? This is a varmint rifle, not a bench rest rifle. Thanks,

[@FClassJohn]

I appreciate the kind comments. As to the end result, it's hard to say. I don't think there's any merit that I've seen in letting ThorroClean soak although you may try letting the flush sit just a little bit before using the clean. Some people like using a bronze brush with the stuff but I have been using the IOSSO brushes and no issues so far. I don't think there's an issue with bronze, they just don't last nearly as long as a the IOSSO brushes and I get about the same result in my experience. I don't use any kind of dedicated bore polish anymore, just the ThorroClean system. Not sure if you caught it but I was reapplying the clean several times during my cleaning.

[@jwschroeder804]

@@FClassJohn I did (to some extent) notice you reapplied more than once, but sounds as though I should try 3 or 4 repeats, i presume AFTER the flush. Thx.

[@jwschroeder804]

Oh yes, forgot to ask, what solvent were you using to clean your brush? Brake-clean? Recommend to use (or avoid)??

[@vikp6115]

What I fo is pull my ar 15 bolt and try new carbon cleaners. Ar bolt where rings sit. You will usually get pretty hard carbon build up there , if cleaner works you will see it right away.

[@jeffreypelletier7247]

I usually take a bore mop soaked with cleaner stuff it in the chamber/ throat let that chill out for like 5 mins or so then run it up and down the barrel then let it soak for a few then scrub er up

[@donaldcostello8312]

John, It looks like a great product , will the abrasive in the ThorroClean hurt the bore of the barrel.

[@MichaelLloyd]

I've got some of ThorroClean but I haven't tried it yet. I've got the perfect test case. I just spent about two hours on a .20PPC and I tried everything but the ThorroClean. I'm not happy with the results. I'll see how the ThorroClean does.

[@LinRobDon]

Thanks John, I ordered some with your code on March 3rd. My Teslong bore scope confirms my barrels were not as clean as I thought. I also ordered a couple Iosso brushes (order # SBC-78680)and received the wrong ones and no response from bullet central after two emails. Their customer service may not be up to par. Thanks for your content. Robert

[@zachboor7541]

Robert, Please give us a call at BC, I do not know what email you are using to reach us.

[@Forumrida38621]

Hey John do you use the same Jags Erik talks about? If so which one is it please

[@jerrysnyder6576]

John, How long is the cleaning rod and how long is that barrel? Thanks

[@gilream]

When you apply the Thoro flush to your brush at 19:37 what comes out of the bottle looks like a thick paste that sticks to the brush in globs. I bought the kit on your recommendation but what i received is watery! it runs like scrambled eggs prior to cooking!

[@FClassJohn]

Did you shake it real thoroughly? One thing I’ve done since the video is out a small nut in the bottle to help mix it. If you’re still having problems I would reach out to BC and get it replaced.

[@gilream]

@@FClassJohn I shook it until I was dizzy! thanks for the reply.

[@whitesturgeon]

This is the best thing since Iosso paste.

[@danielfinke6677]

What vise is that and what were you spraying the brush off with? Also, what’s barrel length on that rifle?

[@willxu08]

After using this for over a year, I have to say this is a must have for ppl who cant stand any carbon left in the barrel.

[@Rico11b]

I use battery acid mixed with CLR, and a honing stone attached to a drill to clean my bore. Works perfectly for a mirror like finish!

[@NowellGreasley]

😟

[@Rico11b]

@@NowellGreasley Did I mention that it does a great job of removing those nasty Lands? Lands... who needs them? Am I right or am I right? ;)

[@sidekickbob7227]

​@@Rico11bIf you use diamond polishing paste in combination with the honing stone, you will remove those stubbern lands even quicker!

[@Rico11b]

@sidekickbob7227 Now we're talking. Great tip, thanks! I don't know who the dummy was that put those spiral scratches and cuts in there, but I gotta get them out. ;)

[@gilream]

LMAO...sure you do!

[@user-bq4gr3gz3e]

Hi John, great video, do you leave a tuner on the barrel while you are cleaning it or do you remove it before hand? Thanks

[@FClassJohn]

I leave it on but will clean it out occasionally. Of course I make sure to clean it off if I see any liquid get in there but I points my gun in a downward angle when I clean so it's not usually an issue.

[@johnhartig7738]

Is this gun the 6.5PRC and then you are running a 7mm brush? I shoot a 6.5 Creedmoor and run a 7mm Iosso brush and it is really tight and I tend to only use it for the first 5 or 6 inches. It does a good job busting up the carbon ring and getting the heavier deposits out. I then finish out the rest of the barrel with a 6.5 Iosso brush. I'm amazed you are getting a 338 Lapua brush through.

[@FClassJohn]

I run a 7mm cartridge and am using a 30 cal brush.

[@johnhartig7738]

I better hit the dumbells then, I should be able to run a 7mm brush through my 6.5 as well. Thanks for the info.

[@gorillamotors]

Love your videos. The only problem with your videos is that I become poorer after each one. Is this now your go-to cleaner? Do you think there is that much more improvement accuracy wise over other cleaners?

[@FClassJohn]

It's about consistency more than accuracy. My goal with cleaning has always been to get the barrels back to a consistent place with the least effort possible so that each time I shoot I know it's starting point. In that criteria, I'm seeing good consistency with it and knowing that it only takes 'X' amount of strokes to get there makes it easy.

[@davidmckey8662]

I find this very interesting! Question. Do you push the brush right out the muzzle and then back again?

[@FClassJohn]

Yeah I do.

[@glockparaastra]

I use Iosso paste and their nylon brushes. Also use Bore Tech Eliminator. How does this stuff compare to using the bore paste?

[@FClassJohn]

It's not nearly as aggressive from what I've seen. Iosso paste is pretty good but most other bore pastes I've used are too aggressive to be used every time. Iosso/ThorroClearn is the only thing that actually advertises as safe to use every time and so far that's working for me. I've cleaned half a dozen times since I made the video and it's working great and my velocities and loads are holding up better than ever.

[@glockparaastra]

Thanks, John. I’ll invest in some and give it a go. Greetings from South Africa!

[@aaronsmith7854]

What kind of rod is that and how long? I can't ever find one over 44 inches and it's a pain in the ass. Good video I want to try that stuff.

[@FClassJohn]

It's a Montana Extreme rod. They come in pretty long lengths.

[@platzgo933]

Hi John Does the product take care of lead in a steel barrel? Thanks

[@FClassJohn]

I haven't tried it, I don't deal with lead like that. In theory it should but I'd give Bullet Central a call and ask them.

[@vbnetway]

John, what were you using for cleaning before this and how do you compare the two solutions/methods?

[@FClassJohn]

I was using BoreTech. It worked as well but took more soaking, time and effort to achieve the same result. I know some people like using that because they feel they can tailor what they remove from the barrel. For instance, if someone ONLY wanted to remove copper but leave the carbon or something like that.

[@justice1327]

What tip is on your Teslong bore scope?

[@heythere6566]

What's in the green spray can that you use to clean your brush? Thanking you in advance!!!

[@FClassJohn]

It's a non-chlorinated brake cleaner like these amzn.to/4aKZRbX

[@redraiderreloading7612]

What brand is the rifle vise you are useing?

[@stevefeldt3114]

Does cleaning to this level of mirror finish invite more copper/carbon fouling? A new barrel doesn't have this level of mirror finish. Just curious.

[@MMBRM]

In my experience you're right. You actually want to avoid the mirror like finish which will copper foul more quickly. IOSSO does this to barrels quite quickly which is why I prefer JB Blue paste(Not the red which works like IOSSO). I'm trying to achieve a perfectly clean bore that still has a greyish appearance as opposed to looking like a polished mag wheel.

[@gilream]

How does a mirror finish "invite" more copper?

[@Mahziar69]

Does it slow down the barrel like JB bore paste?

[@LadCo12]

Mine seems to be thinner than yours. Have they changed the formula?

[@donniepollard8441]

Any fear about damaging the barrel, crown, etc? I know it’s an ever popular debate but I was curious on your thoughts if you moved to this as a frequent cleaning use.

[@FClassJohn]

Yeah I'm not really that worried about it compared to using actual other bore pastes that are far more abrasive competed to the ThorroClean. And no, I don't worry about the crown either as long as I'm not actually damaging it by hitting it with anything.

[@douggrantham3962]

Hey John. What is the spray can you are using to clean your brush with ?

[@FClassJohn]

It's this stuff here amzn.to/3TKlv8R. I make sure it's chlorine free.

[@douggrantham3962]

@@FClassJohn - thank you.

[@BarbosaUral]

It's been two weeks. Where is the follow up video?

[@paulsprague7754]

Try bore tech c4 carbon remover.thats what I'm using.give it a try .

[@LanceX-hv3gr]

Been a good product for me too... Carbon ring in at the end of the chamber? Just put in a chamber brush soaked with the stuff and leave it for 15 minutes x 2 then if still a bit left I just leave the brush in the chamber overnight... Not a problem. I will be trying out the oversize bore brush idea though. I also find wrapping a patch around the brush gives a lot of extra scrub power.

[@asdfasdf3307]

What rods are you using now? Length? Looks like a Montana xtreme.

[@FClassJohn]

Yes you are correct, Montana xtreme

[@thurmanreavis2003]

what product are you spraying on the brush to clean it?

[@FClassJohn]

I use this stuff around the reloading room for that and anything else that needs cleaning of gunk. amzn.to/49WAmnm

[@browninghunter86]

How does first shot out of clean barrel shoot compared to fouled?

[@FClassJohn]

My barrel has been settling in much faster, typically just a couple shots compared to maybe 5-7 when I start with a dirty barrel.

[@newbtubetecher]

Use electronics contact cleaner. You’ll be glad you did.

[@threekblack217]

I am not able to clean the tough lead fouling in my air rifle barrel even after putting a couple of hundred strokes through it with a brass brush & carb cleaner. Will Thorroclean be able to do the job please?

[@FClassJohn]

I don’t know if it’s air gun safe. I would call them.

[@zachboor7541]

yes it does Ernest rowe has done it.

[@LanceX-hv3gr]

Give Boretec Rim Fire Blend a try. It takes out lead and other fouling and I have seen amazing patches come out with silver streaks for the first few goes. The silver streaks are the lead from the bore. I have been using it with cast bullets in a 30-06 as well... Does the job. Call Boretec and see if they feel that their product is suitable for use in an air rifle.

[@threekblack217]

@@LanceX-hv3gr Ok thanks i will try this.

[@stevenmarcus2709]

Sometimes it just needs an extra 30 strokes🤷‍♂️ sometimes 30 is plenty, it all depends on the day I reckon.

[@Charles_ONeal]

Where can I get the nylon brushes? All I can find is bronze.

[@FClassJohn]

Here ya go bulletcentral.com/search.php?search_query=iosso+brush&section=product

[@Charles_ONeal]

@@FClassJohn Thank you very much. I got some ordered.

[@jcjustice3786]

👍

[@chrisglover7080]

Hey john are you going pushing your brush all the way thrue your barrel and pulling back over your crown?

[@FClassJohn]

Yes I am.

[@chrisglover7080]

@@FClassJohn no worrys? If it dont make you nervous it shouldnt make me nervous. Do you something protecting it?

[@FClassJohn]

@@chrisglover7080 No I don't protect it. But also, please understand that I go through a lot of barrels per year so they rarely get to 2000 rounds. I suppose it's conceivable you could damage the crown, although I think as long as you're not actually banging the crown it's not likely to be a serious issue. Plus for people who have barrels that they never get rid of, it's easy for a gunsmith to re-crown if it really came to it.

[@chrisglover7080]

@@FClassJohn makes sense

[@jbrumbaugh]

What bore scope is that? Amazing clarity.

[@FClassJohn]

It's this unit and I love it amzn.to/3V9iDVD

[@shaunwestergard9276]

IMO nothing gets the barrel as fast as this does. Never have I had so much carbon come off the brush at once. I use brake clean to keep brushes clean

[@paulfix8081]

Do you graphite coat the barrel when you’re done?

[@FClassJohn]

No. I used to do a bunch of that stuff and just didn't find the benefit personally.

[@L0NGRNGE]

Best stuff there is, been using it for years. Throw away the flush and all other cleaning products. Just need Thorroclean cleaner and isopropyl alcohol. That's it.

[@jaybigboy34]

What did you spray that brush with? Brake cleaner?

[@gilream]

yes..carburetor cleaner works the same...cheap stuff

[@FClassJohn]

It's CHLORINE FREE brake cleaner.

[@platzgo933]

😊

[@user-kf6uq6rd3n]

Which spray cleaner are you using .

[@FClassJohn]

It's the chlorine free cleaner here amzn.to/3V6HJ7r although to be fair you may find it cheaper at your local auto parts store.

[@CoyoteRegulator]

This stuff works no doubt. The problem is the caps or lids on the bottles this stuff comes in suck. Put this stuff in a better bottle and it really is better then most other cleaners available.

[@FClassJohn]

I've put it in a softer squeeze bottle with a twist top and a nut in there to help it mix.

[@lukkar69]

What are you using for a borescope?

[@FClassJohn]

I'm using this Teslong amzn.to/49NwtB0

[@vwpilot00]

What borescope were you using?

[@FClassJohn]

I use this one and it's great amzn.to/3V9iDVD

[@vwpilot00]

@@FClassJohn thanks for the reply, it’s one of the better looking ones I’ve seen without spending an arm and a leg.

[@andrewmckee1156]

I was going to buy this but opted for Bore Tech based on the expansive reviews online. Thank you for making this review. It’s something I may opt for next time.

[@FClassJohn]

That's actually what I was using for quite a while but I like not having to let anything sit while it works. Both are good, just different application and usage.

[@andrewmckee1156]

@@FClassJohn thanks for the reply and feedback, love your video content, always informative

[@berra_the_shooter]

Used this for like two years now. Ive tryed it all and there is no product that gives so good result on so low effort and price.

[@MMBRM]

As someone who shoots multiple disciplines and cleans to bare metal every time a gun is shot I'm not seeing anything particularly impressive here. Patch out wipeout and accelerator followed by JB blue bore paste(not the red which functions like IOSSO) works faster than this for me. In my experience a mirror like finish is not optimum as it tends to actually pick up more copper. This is why I don't use IOSSO as it acts too much like a polish. JB blue bore paste is also a fast cleaning mild abrasive but will not generally lead to a mirror like finish. It's hard to explain but what you're looking for is a perfectly clean, bare metal that still appears grey instead of looking like a polished mag wheel.

[@gilream]

explain why a polished mirror finish catches more copper than a burnished dull appearance please. don't understand that reasoning.

[@MMBRM]

@@gilream When you polish beyond a certain finish It actually increases the friction between the copper jacket and the bore which will sheer the softer metal and deposit it on the harder. This is a pretty well known phenomena. My guess would be it happens because you increase the surface area contact by removing all the microscopic imperfections. You can learn more about this by typing "Why does polishing increase friction" into google search engine. "Should I polish my rifle bore" will bring up a lot of anecdotal evidence.

[@gilream]

interesting. to me it seems counter intuitive @@MMBRM

[@MMBRM]

@@gilream I agree. I found it counterintuitive myself when I was first told about it by a gunsmith.

[@user-mn6to4fi1e]

John, love your content. But in the case of this video, you don’t know what a carbon ring is. It’s not in the neck area that you easily cleaned. Just forward of that there is a thick “ring” of carbon……

[@ErikCortina]

Is it in the freebore area?

[@johnplummer1619]

All it is losso watered down

[@justinadcock3184]

Hey John! A fellow KZbinr, Backfire, just challenged any KZbin to participate in a 100-600yd shooting gauntlet. You should reach out!

[@FClassJohn]

I appreciate that. I watched his video and thought about it but that challenge is probably better left to someone like Cortina who's a better all around shooter than I am.