Teufelshund Tactical Heckler and Koch Ambi Trigger Group Stuck Selector Lever Video

[@forrestadams]

I didn’t go all big dumb animal on my HK thanks to you!

[@ValeStuff]

Thank god I found this video before I created a speed bump lol. Went through your video of tips cleaning as it was my first time and I encountered the locked selectors. Didnt force it, just took it apart a few times and made sure It turned smoothly and it finally worked. Thanks!!

[@AlmostFamousShow]

My right side selector lever is lose on my sp5. The firearm has less than 400 rounds. I took out the trigger pack to clean into the polymer lower. I reassembled the trigger pack correctly from your videos and did not gouge or remove any metal on the FCU. In safe the safety levers are stiff, but in fire the right lever wiggles a lot. Thanks

[@teufelshundtactical]

If you have any concerns, you can contact Ryan in HK Repair for warranty service or buy a replacement right side selector.

[@drsuikoden3850]

Thank you for the amazing video, i managed to fix my lower with this video

[@philgamboa2906]

Great Video! Like how take the time to explain each part and how they function. Looking to watch more of your content and learn.

[@sirrisdesign4]

I’ve always felt that if the detent ramp was a slightly softer transition, this wouldn’t be as frequent an issue. The transition is often sharp and the detent struggles to engage it properly, even when seated correctly. I’ve run into this numerous times on new packs.

[@F4iGuy599]

Excellent video as always!

[@sameednakai8766]

Thanks for such a detailed video. Had some speed bumps putting my navy group, together put it in several times but something would bind up, turns out my detent pin wasn't centered so wasn't getting depressed as much as it should.

[@k5blaze84]

Love me some roller lock content!

[@fusionvic]

Great video James. Thanks for the advice via email as well!

[@jasonmacconnell931]

Great content…pretty sure that semi auto group is mine….lol

[@OuyEbuts]

Very helpful video. Will receive my HK SP5K PDW in a few days. Thank you.

[@FancyGothicKnight88]

What if there is no burr and the safety selector still hard to move? The selector being a 0,1, F navy selector and the trigger pack being the U.S. made semi auto ambidextrous navy HK parts trigger pack The selector is German if that matters

[@teufelshundtactical]

Sounds like polishing of the contact points still needs to occur.

[@FancyGothicKnight88]

@@teufelshundtactical what should I use to polish it? Any videos on how to do that? I have some nice tasty beverages on standby to get enthusiastically focused on some HK knowledge hahaha

[@teufelshundtactical]

@@FancyGothicKnight88 The inside of the trigger pack where the selector levers mount.

[@toniostyle]

Happened to me. I got it back to go in. But the damage is done

[@Cyndio67]

You should do a video on your range bag.

[@kevinthorn9672]

I followed your video and it's stuck at safety it won't go back to fire mode

[@teufelshundtactical]

If you need help with armorer services, just like it says at the end of every one of my videos, you can contact me through the website.

[@terrorbytez6537]

god help me my BF binary selector wont stop going into the 12 oclock mode. i dont know what to do at this point.

[@chrisbulldog1353]

Awesome and it’s not even Wednesday it’s like tacos 🌮 every day

[@renardmuldrake859]

Wish I watched this video, BEFORE jacking up my SP5 trigger box lol.. I sent it off to HK and they solved the problem in no time, exactly as you described. One thing I had a minor concern about was the slight wiggliness of the right hand selector lever now when everything is put back together. When In the fire position, when pinching the right hand selector “tail” I can slightly tilt it out and away from the housing a couple of millimeters. Not really sure if it did that before or if I’m just splitting hairs now that Im noticing it. Snaps in and out of safe/semi with great authority and functions fine, just worried about the wiggle getting worse over time. I think it’s probably a combination of a small amount of plastic shaving off when I jacked it up, plus the slight filing and removal of metal burr increasing the gap between the selector drum and the trigger box. To what extent this wiggle is acceptable before it starts further damaging and/or causing selector to fall out is the question.

[@teufelshundtactical]

Yep, sadly owners find out about me and my services after the fact. But regardless of proactive or reactive, I’m here to help. The wiggle is probably the result of removing too much material.

[@renardmuldrake859]

Thank you sir! I am enjoying binge watching all of your vids, so as to absorb as much HK knowledge as possible. Once my brother inevitably gets into MP5’s, I’ll be happy to share with him the knowledge I was too impatient to learn before hacking away at mine in the first place. Patience... that is the key to all things in life. (including successful trigger housing swaps!) one of these days It will finally sink in for me :)

[@terrorbytez6537]

@@teufelshundtactical god help me my BF binary selector wont stop going into the 12 oclock mode. i dont know what to do at this point.

[@teufelshundtactical]

@@terrorbytez6537 My answer for that will always be not to use that.

[@terrorbytez6537]

@@teufelshundtactical so its defected? Im I looked all over this thing and nothing seems out of place I figured its my ignorance on the device on taking the selector off take down mode...Have you seen this issue before?

[@cadenharper6408]

Would it be possible to put a mp5 .22 trigger pack in a navy 3 select housing? I would be leaving it to be only semi auto I mainly want it for the look.

[@teufelshundtactical]

I am not familiar with the .22 model to provide that answer.

[@cadenharper6408]

@@teufelshundtactical ok thanks for getting back to me.

[@tomyen187]

Man, you've put every little secret in the video but people just missed (including myself). One should get a license and approval from you first before possessing any HK firearms........

[@teufelshundtactical]

Well, you've got me when help is needed.