AWD D16 INTEGRA BUILD GETS FIRED UP! NEW WIRING HARNESS & MORE!

D16 AWD Integra build is finally running right and shooting some awesome fire balls! We had to replace the interior wiring harness due to damage of previous owners before my brother got the car. Its running strong now check the process out!!If you like this kind of content Please subscribe, like & share the videos around for more awesome content to continue to flow!. GOD BLESS, Stay safe, Stay Awesome!
FREE Holy Bible download
tinyurl.com/er...
AWD D-SERIES TRANSMISSION ($750)
theoldschoolca...
D2B Conversion kit with NO TRANSMISSION INCLUDED $1,200.
www.swapshopra...
Bullboost John 3:16 steering Wheel (DISCOUNT CODE- MOORE10)
bullboostperfo...
Link to Brahmanlube/Bestline PROOF ITS GOOD TEST
• PROOF!!! ORIGINAL BEST...
-intake-manifold-k20-k24-k-swap-eg-ek?ref=i4xMDGGw
Link to Bullboost fuel regualtor
bullboostperfo...
Link to Bullboost fuel filter
bullboostperfo...
Link to Bullboost Fuel rail
bullboostperfo...
Link to Bullboost Ignition coil covers
bullboostperfo...
Link to Jackspania AWD diff brace
jackspaniaraci...
Link to Jackspania 380LPH pump being used
jackspaniaraci...
Link to Jackspania Turbo
jackspaniaraci...
Link to Jackspania Turbo manifold
jackspaniaraci...
Link to BrahmanLube AKA BESTLINE (what im using in my oil)
Discount code- MOORE15 for 15% OFF!!
www.brahmanlub...
Copyright free music info by Kingshock
/ @garden_state_grandeur
/ gardenstaterecordsllc
Link to High Quality Moore Motorsports Merch
(ALL PURCHASES HELP ME MAKE MORE CONTENT)
www.storefront...
CLICK THIS LINK TO SUBSCRIBE
TO MY OTHER CHANNEL
/ jamesdguy
If you want to help support the builds
i am always accepting donations
My cashapp- $Jamesdguy or
Paypal donations accepted
paypal.me/moore...

[@TexasHondaChannel]

This Z6 has B18 rods not B16 I said that wrong apologies.

[@eclassfb9335]

You gotta love the way Honda parts mix and match! 💪🏻

[@TexasHondaChannel]

@@eclassfb9335yea for sure!

[@6mtdrino]

How did the d series trans mate up to the y7 block?

[@MrCrowley925]

Long live the single cam’s

[@TexasHondaChannel]

💪🏻😎

[@fanoftheclassics5720]

Love my single jingle j30❤

[@LoftyCraftINC]

Finally! A GREAT mechanic who spreads the word of God!!!! This world needs it. Bless your heart brother.

[@thedanbot85]

Awesome progress

[@n.kempland2825]

I’m so ready to see AGN work their magic and see this thing rip. Good work, man!

[@TexasHondaChannel]

Yea for sure! Eric will be able to get this thing going great! Granted it will have to be FWD for the dyno but yea it’s gonna be fun!

[@StoneyBrownTV]

I'm really digging this Integra. I always liked the looks of these cars. I didn't understand that the round lights were the American version but I like that look more. Looking forward to seeing more. I'm considering getting a Civic to flip and tool on so knowing I can build a D series helps. I'm still learning tons from these channels so keep that content coming bro. Be blessed 😇

[@TexasHondaChannel]

Thanks and I definitely will! These cars are fun and idk why people get so bent out shape it’s just fun.

[@bryanhinson987]

Man I'm telling you every time I watch one of your videos it inspires me to get out and try to fix my d16 ek after I had a seizure and wrecked Its hard to get the motivation but I need the front core support like yall have and a windshield and steering wheel and ill be able to drive my car for the first time in over year but love the channel keep up the great work

[@TexasHondaChannel]

Praise God! I’m happy i can be useful for something!! Sorry to hear about your seizure and wreck that’s rough.

[@Adam-nv9zo]

I can't wait to get my Integra on the road. God bless you, brother.

[@caseyrenner2061]

I dig the ol single jingle… it’s wild how much abuse they can take , along with all the power.

[@TexasHondaChannel]

Yes for sure! I have a video on the channel of me cramming 19psi into a bone stock y7 and it holding and that was with a GT30 turbo.

[@caseyrenner2061]

@@TexasHondaChannel such a underrated engine platform. thank you for everything you do/share I really appreciate it! God bless

[@CJBuilt]

This is so awesome! D series power

[@mikeymike2552]

IIRC the D2B adapter won't work with the b-series awd trans anyways. Plus with all the k-swap the world builds, its pretty cool seeing a d-swapped integra

[@TexasHondaChannel]

Thanks we agree!

[@n.kempland2825]

The D2B adapter kit will work with it but you’ll have to recreate a provision for the starter. Other than that, should bolt right up.

[@mikeymike2552]

@@n.kempland2825 i figured with modifications you could make it work

[@6ixdub]

Remember watching you when your channel was “ James D guys “

[@TexasHondaChannel]

My other channel is still that title in the URL kzbin.info

[@matthewfenton8775]

Amen! I’m currently gathering the parts out of a d16z6 integra to put into my 1983 mini. Will maybe turbo it one day

[@kseries20-24only]

Looking good guys! Don't you love removing dashes and chasing wires?

[@TexasHondaChannel]

Oh yea just sooooOoOooOooo much fun.

[@jonzo22]

underrated channel!

[@ejsvirtualgarage]

I would LOVE to see that car on the track.

[@TexasHondaChannel]

Yes! I miss the track days! I unfortunately break something every time so I can’t always go lol but Eddy shouldn’t break a ton since it’s awd and they leave like a rocket 🚀 on the Launch

[@peterbryant3584]

Great job looking good

[@kjrd2107]

I have that same ignition problem for a year now and still can't figure out what's really wrong so did the push button too😂 14:07

[@ashermorales8276]

Such a unique and cool build

[@TexasHondaChannel]

Thank you 🙏🏻 appreciate it

[@waynejordan7473]

You ain’t lying . I’m in south Florida bd need a trans my dc4 . $500 for transmissions that require rebuild out here . Thought about going k series but maybe just to get it back and running I might have to take a step back and go 1.5 1.6 . Cool build too not something you see everyday in the Honda community atleast . Very unique

[@rickyboostedhonda27]

Awesome ! God is good

[@TexasHondaChannel]

Amen!

[@mihailpetrovici5044]

"the turbo spools up really well" with the intercooler not even hocked up to make boost

[@TexasHondaChannel]

Yea but it’s ballbearing so it would either way 😂 I have had journal bearings not spool this good given the same circumstances. We are working on that stuff next he don’t have the intercooler yet. Hater 😂 just kidding much love

[@Yafatha-]

brotha I love your straight up honesty and dope videos

[@TexasHondaChannel]

Thank you I appreciate it.

[@eclassfb9335]

Love it! I think it’s a unique setup that’s rad!

[@TexasHondaChannel]

Thank you 🙏🏻 appreciate it. It’s a really cool setup and can’t wait till it’s spinning all 4

[@bakirhminuty3286]

Amen my brother. Keep spreading the gospel!

[@CarlosSanchez-vx2ge]

Great channel I'm building a b16a3 witch is in my delsol at the moment and also building a b18c1 in my garage to trow in later on any pointers on what valves retainers and pistons and rods to use for each one I'm working on a budget already have a chipped p28 with a base map and a old school s300 laying around that needs to be installed on the p28

[@ackeemjohnson1168]

Love d series

[@1uptopmontana207]

Good point on the D-series 💯👍🏼

[@GlassWerx]

Cars lookn good. I really need get mine back running and find one to get all the stuff for a manual swap in mine. What did that awd trans come out of??

[@waynejordan7473]

Turbo bigger than the cam gear 😂

[@tristanjavier1303]

🔥🔥🔥🔥🔥🔥

[@infinite540]

How did you learn how to wire a honda?

[@gregautomotivation]

Great video bro 🙏🏾💪🏾👏🏾

[@n.kempland2825]

I didn’t know they had AWD hydro D transmissions. That’s pretty cool. Are they out of the foreign Integras?

[@TexasHondaChannel]

Probably so. I’m not 100% sure but I definitely know they exist! Haha

[@BF703]

Wonder where you got the idea for a boosted awd sohc integra

[@lsturbohatch10]

B16 rods? Someone lied to you guys.

[@2BBackyardMedia]

They are b18 LS rods actually. We tore it open and confirmed it with the rod part numbers. They are custom machined to fit the Z6 crank

[@lsturbohatch10]

@@2BBackyardMedia ok yea that’s doable. B16 rods are too short

[@TexasHondaChannel]

@@lsturbohatch10yes sorry i had it wrong lol

[@hondainsight421]

Out of curiosity how much does the z6 with turbo and tranny weigh? Thinking about swapping out the power train in a Suzuki Cappuccino and need to keep the weight down

[@JustH3LL_]

Hey man! I've hit you up a few times and failed to respond back to you (most recent was on Instagram asking for assistance regarding a bad random misfire, ended up just being some real nasty injectors, lol) Anyway, I''m looking to get a mini-me swap knocked out on my 97LX 5mt. So far I have the following: -a complete d16y8 that I'm planning to pull the head off of, not sure what to do with the block as of yet -y8 intake manifold (I believe the MT version with the IACV with a different pinout, I'll have to take a look at it) -P2P MT ECU I believe I require the following things left: -240cc (y8) injectors -new head and IM gaskets -knock sensor -possibly head studs -some wire to connect the vtec solenoid -ECU pins from the junkyard for above vtec hookup -fluids (coolant, oil) Is there anything I may be missing? Cheers from Fort Cav/Killeen

[@TexasHondaChannel]

Sounds like you got it figured out 💪🏻 if I think of something I’ll let you know.

[@JustH3LL_]

@@TexasHondaChannel for sure man! You know any places in the area where I could knock the job out? I stay in the barracks so I don’t have my own residence to knock it out at

[@TexasHondaChannel]

@@JustH3LL_yes actually there is a place on base you can use if your in the military. I can’t remember what it’s called but basically you can use the shop on base.

[@JustH3LL_]

@@TexasHondaChannel Sprocket? That place is pretty neat, been there a few times to knock out smaller things

[@TexasHondaChannel]

@@JustH3LL_yes that’s the one!

[@ackeemjohnson1168]

Wats different between the z6 and the y8

[@odevious8081]

This is called sohc my dohc

[@goldfishninja8086]

So much room in the bay

[@TexasHondaChannel]

Indeed!

[@smokeandmirrors-pk6ic]

Do you use a p28 with the s300? Also did you do the socketing/soldering yourself or did you send it off to an expert, because I always have issues with my Neptune/demon setup failing and not datalogging and it’s always the ecu..

[@BlasSuliveras]

AMÉN

[@Top-G35]

Wait hold up your not going to just glass over the b16 pistons in the d16 how

[@el-lobo-cy]

❤ can i have link for your steering wheel?

[@adamhashimoto8515]

🤔👍

[@TexasHondaChannel]

💪🏻😎

[@EpicFragz]

This build didn't last 6 months.

[@6mtdrino]

Wym

[@thebeast-zf6jb]

I don't think d series can make 500hp in your dreams

[@TexasHondaChannel]

Well it’s already been done many times but I think your just trying to get attention so Go ahead and go to the KZbin search and type in 500hp d series and enjoy. Have a blessed day.

[@n.kempland2825]

I mean, this particular setup can’t, but James is right on making 500whp on a budget and I can gladly pull resources to show you. Even if you just swap the rods and reuse the Vitaras in it, it’ll handle 500.

[@alanclark9000]

​@n.kempland2825 😅no sleeves on a d16 with 500hp = hole in the block... even an all built d series that makes 700hp, will only make it 7.5k rpm and up, pointless

[@mrlrgmouth3692]

Anyone that believes in him shall not have only.everlasting life you also will be humiliated for doing shit backwards.