The 30+ Most Anticipated 3D Printing Products Coming Soon

[@thenextlayer]

Thanks for watching! Just a heads up, since I recorded this video, Creality informed me that they're releasing the K2 Plus on June 5th at 9AM, and they're giving the first 200 people ***50% OFF*** (and the next 500 people 40% off, which is still pretty damn good). Claim yours here: jle.vi/k2plus

[@jacobjames8137]

9am in what time zone?

[@FounderOf4]

US EST

[@techhead-bedhead]

i have to say it here dont buy the eddy sensor hilariously unreliable

[@DunRiteCreations]

They actually ended up doing two batches of 200 at 50% off. Was lucky enough to snag one this morning!

[@mattlberge]

But... but... I did watch the SV08 upgrade video... (awkwardly standing alone in a massive room)

[@mattwhitepaintjob4925]

I did as well so you're not alone.

[@DunRiteCreations]

Same here. And impatiently waiting for mine to arrive

[@III-zy5jf]

Same. I also ordered the Eddy. Now I'm having second thoughts. It doesn't do Z-offset or Z-stop, which won't prevent a crash. It could create a mesh with spikes. I don't know if I'll have bobby time to fiddle with it and Klipper.

[@Jzawolkow]

He is using the same guilt inspiring rhetoric that my mother used on me my entire life. P.S. call your Mothers!

[@georgskleinewerkstatt8678]

Me too...

[@FounderOf4]

Okay, the hammock scene was pretty funny!!!

[@leonartou]

The new hybrid vcore is actually not an AWD printer with additional A and B motors. The two additional ones are just for the Y axis. They are basically cartesian.

[@ESPS_90]

Excellent video. Is there any news from Bambu Lab about a new version of the X1 carbon or a larger format printer?

[@olti6845]

Unsure to buy the x1c combo now or to wait... maybd they release a a1 Max first or something else...

[@Drivenapollo]

The keyboard button thing is something I wish I had on my printers. 8 or so buttons to start certain features I use all the time would be awesome! The kid friendly printers are awesome to see people covering too. My daughter is 3, and loves to watch the printers, and remove items from cooled build plates. She knows not to touch anything because it’s very hot. This mass product update video is awesome, and I hope you make more! I was one of the few to watch the sv08 upgrade video. 😂

[@BWtalks]

Please show the glasslike resin! I’d really like to see the quality both “hot off the printer” as well as post-processing.

[@petergplus6667]

Polymaker...for 30 bucks you get an entire dryer. Why spend it on an empty box?

[@ygk3d]

Omg the hammock shot hahaha. Too good!

[@thenextlayer]

Haha thanks, glad someone appreciated it

[@SianaGearz]

Don't all spool refill systems descend from Richard Horne's Masterspool, which was deliberately intended as an industrywide open standard? "How has no company thought of this" regarding filament subscription service... uhm probably because it's not a very useful idea? You don't need a subscription for filament and you don't need a subscription for inkjet ink, you just buy them as you go depending on consumption. And if that's too much ongoing effort, then just buy more at once and leave some sealed up. Even shaver blade subscriptions though more justifiable since people have sort of a constant consumption of them, are more predatory than actually useful.

[@Parodidical]

Protopasta also has a filament subscription

[@DrewBradberry-b5i]

Great Video! Always love watching and learning.

[@_DROM_]

At this point, what really matters for me is if these companies make their tech accessible and open source.

[@_DROM_]

@_Richard_F___ I'm guessing your comment was misplaced?

[@hallowedshade125]

This is a great video for a series. Please do

[@TheFeist77]

My son and I are happy with the bambu mini, we are learning. But I am interested in upgrading for myself, but bambu won't say what is next and when. Should I wait and see, or go ahead and buy the older p1p or carbon.

[@MrBooth1974]

Bambu just did a price drop announcement… so I’m betting we will hear about something new by early July… and a fourth quarter release date, in time for Xmass

[@JamesTenniswood]

Nice to see a video that didnt end in a shambles. More of this stuff please

[@thenextlayer]

LOL I know, right? I bit off way too much the last few months, and need to scale back from project videos and do info videos once in a while.

[@shawnmcelroy1829]

that stinger project looks amazing. id love to see a build video. id also love to see how reliable it is for print farms. you shold do videos like this once a month. maybe a "This month in 3d Printing" series talking about new releases and upcoming stuff like this. good work! cant wait to hear more about the filament grinder!

[@thenextlayer]

Once a month is a LOT considering I put out only 3-4 videos a month... I don't know if I want 25-33% of my channel to be 3D printing news instead of projects. BUT... I will look into doing one every quarter :)

[@willofthemaker]

LH Stinger is an absolute beast. Been following it for a little while. Didn't know about the kit

[@thenextlayer]

It's expensive, but so are Vorons.

[@jacobmurray3621]

I want to say your channel is entertaining and informative. I am sorry you’re dealing with hate from people over things you can’t control. And you appear to handle it well. Ignoring comments is something I might recommend to you if they get to you too much.

[@MrYabbie]

Great video! Keep them coming. & yes for that super fast desktop printer - looks awesome!

[@my7hik]

Am I the only one who didn’t mind the SV08 video? Haha. It certainly got everyone talking!

[@1fareast14]

Yeah, pretty overhated. I'd have split it into very short parts if it meant a completed build and more time dedicated to the design of community mods for that printer

[@Fishfood007]

I just find it funny how there are two types of people in the 3D print hobby those who like to print and those who like to work on printers. Can imagine buying a product just so I can spend more money on it to buy all new parts and then be happy with a custom printer just build one from scratch. Lol

[@3DPrintSOS]

FLEXING on em with the hair twirl!

[@thenextlayer]

Hahaha! Wait till you see next weeks video though…

[@juliusedralin311]

I really want to support SOVOL. Is there an official store in the Philippines? Sad to say, our country is NOTORIOUS for scam sellers. I've been wanting a SOVOL since last year but bought another 3d Printer due to accessibility, fairly happy about it, but I really really want a SOVOL. Thanks.

[@protonus]

Do you plan on reviewing the FLSun S1? I'm very interested in it but would love to hear your thoughts!

[@joshuaarce6710]

Love the channel. Keep producing/printing and I’ll keep watching/viewing

[@BeardedPrinter]

That filament subscription thing is GENIUS!

[@swdw973]

Need to cover Wham Bam's fire extinguishing system for FDM printers called The Cloud. Great idea. Discussed it with Wham Bam's owner at the Rocky Mtn Rep Rap Festival. A much needed safety idea for protecting your house / building. He told me about all of the testing they did before releasing the product, and I was impressed. Like their other products, they did put a lot of work into the development.

[@Koomoa]

Should I buy now or wait for something better just down the road? Want to get FDM printer, at least helmet size.

[@mandyj5222]

I appreciate this type of information video, I don't always see the new products coming out and want to stay updated! I like many others I'm sure want more options when it comes to multicolor printing! Love my Bambu Lab printers but I am very open to other printers with less waste. I hope there will be more AI interpretation for the filament loaded to tailor the purge amounts to the actual material being used! Or at least a transparency test sensor of some sort. He who gets that right, gets my money frankly. Thanks for the video, have a great week all!

[@kronkie131]

to be honest pretty great kexcelled is using bambu spool dimensions because if every manufacturer adapts we can use every refill with every spool already was hoping for this so hope it becomes reality

[@Founders4]

Jon, filament subscriptions are definitely a thing but it's usually through Amazon fulfillment. Just wait for a filament to go on sale and there's usually further savings if you "Subscribe & Save", that's what Amazon calls it. I'm not sure if this is available in Israel but it's a thing here in the States.

[@thenextlayer]

Oh that's a good point, hadn't thought of Amazon.

[@k-sell4065]

As I sit here and binge watch your videos, now I want an up to date 3D Printer. I’d like to print my own replacement parts for some my equipment

[@thenextlayer]

DOO ITTTT

[@MitchM240]

It is interesting to see how shamelessly the other companies are copying Bambu. Specifically the AMS.

[@Le_Sixx]

LH stinger is probably the coolest bed slinger developped by a great engineer! RatRig came also with the engineering ! BTT Coil Eddy looks great too !

[@BeefIngot]

The problem is imagine printing a long slim item vertically. Immediately the problem becomes evident even if it doesnt just fail. If the part has to move, the part has to move. Outside of printing speed venchies and trinkets moving the potentially heavy part will be slower and will lead to lower quality.

[@Le_Sixx]

@@BeefIngot you can slow down...... On tall thin parts. Usually, these parts won't have a good level of integrity either. The point was "it's the nicest built for a bed slinger". Cross gantry is the way to go for a higher purpose we know.

[@BeefIngot]

@@Le_Sixx You can slow down, but the point is, a bed slinger simply cannot be as fast as other options. Its an important point to make because many people incorrectly have said otherwise because they see some fancy speed boat test. I just want to make it clear, because that pervasive myth would let manufacturers go back to the crappy ender 3 clones of yonder.

[@Le_Sixx]

​@@BeefIngot This is unrelated to what I commented... I said it is the coolest bed slinger, nothing else.

[@LordWiseWolf]

This was a super cool video. I think every quarter or 6 months would be perfect.

[@fitchaj]

Well I just put a reservation down for the rat rig 500 following this clip. Been looking for a large print bed option

[@genemaster74]

G'day from Downunder.....id definitly like a 1/4ly outlook on new and or upcoming products for the 3d printing community.....i really like the fact you got me interested in the BTT Panda Touch..big cheers to you from a shut-in here in Australia

[@thenextlayer]

Thanks mate. I'm on it! However... isn't it pronounced downunda?

[@genemaster74]

@@thenextlayer yeah m8...only if ya an Aussie bogan.😂....us proper Aussies use Decent English😝

[@lemontron]

In addition to the LDO Positron V3.2, don't forget the LEMONTRON! Open source, built in power supply, unibody design, integrated extruder, and relentless cost shaving!!!!

[@emanuelesparacca6322]

Kudos, excellent format, 3D printing news, I'd suggest you do this at least monthly if you can

[@thenextlayer]

MONTHLY?! That’s a lot. It was a ton of work to wrangle suppliers! But I think I could do it quarterly. Maybe more…

[@emanuelesparacca6322]

@@thenextlayer I loved it, no one is making 3D printing news yet, seriously it can become a big thing, congrats

[@miker6484]

The slobbering over Sovol is a bit over the top. Their customer service is pure crap…you don’t mention that. My SV07 Plus purchased in late February, went down in April and Sovol was immediately notified. This is June. 10 days ago Sovol told me they were sending a power supply. As of today, USPS is still waiting for the package. Absolutely nothing has happened. I’m sure they take great care of you, but that means little to the rest of us. If you look around, it doesn’t take long to find people in my position… Screwed and at the mercy of people who don’t care. I would have loved to finish the video, but if I had to listen to any more slobbering over Sovol, I was going to puke.

[@thenextlayer]

Oddly I’ve been told the exact opposite, too…?

[@miker6484]

@@thenextlayer I would be remiss if I claimed that nobody ever had a good experience with Sovol. Exactly like you are being remiss, claiming that they have such great quality and reliability… Without any disclaimer. A machine that fails within 60 days of purchase obviously disproves your statement about great reliability. if your comments and reviews are going to be useful to the public, they need to reflect both sides of the equation… Not just the fluff you’ve been spewing in this video. I’m not basing my comments on what I have been told… I’m basing them on personal experience. Makes a considerable difference. When a company has no sense of urgency to care for their products under warranty, you should be honest and say so. I realized that would cut into your pocketbook, so I’m sure that won’t happen. This is a reality, not some thing heard: How many days does it take this reliable company to get a part to the damn carrier? Shipping Label Created, USPS Awaiting Item GRAND PRAIRIE, TX 75050 May 25, 2024, 12:03 pm

[@thenextlayer]

Hi Mike, I just saw your email (I only check email twice a week), and I've forwarded it to Sovol's general manager. They've had some staffing changes in the last month, and I think maybe your order fell through the cracks, however, I'm going to bring this to their attention and try to get an explanation as to what's going on over there before I continue promoting their products. Thanks for bringing this to my attention

[@renesfoodpassion]

Ratrig nailed it! Innovative IDEX ❤

[@G2bb101]

We've got Voron in red and ratrig in green why don't we have an open source blue printer?

[@Gero-x3w]

Could you please tell me if the ace pro is compatible with the anycubic kobra 2 pro or if it will be Thanks

[@thenextlayer]

Not yet, but hopefully soon

[@jacobjames8137]

Im REALLY looking at the P1S or A1 for the Bambu sale tomorrow. Now I have to research this K2 Plus.... Such a hard decision

[@thenextlayer]

Truth... tough choice.

[@DunRiteCreations]

Man this news about the k2 plus has made me kinda regret my SV08 pre order. Sounds like this might be cheaper if I can snag it at 50% off. Fuck I might piss off the wife and order it too

[@EngineeringAddiction]

Bambu lab is the way to go

[@DunRiteCreations]

​@@EngineeringAddictionYes and no. They aren't the end all be all like many parrot but they are great printers. They made huge waves in the market with their launch but very comparable and even some better printers have been released since then. And most of them are even cheaper as well. I love my three P1S combos but I also have an SV08 on the way and I'm gonna try to snag a K2 plus combo tomorrow morning at the half off pre-order price. Even with Bambu's lowest prices to date with the current sale going on, the half off the K2 is actually like $20 CAD (plus I think $65 CAD for shipping with the Bambu so $85 CAD total price difference) cheaper than the P1S combo, but is 350³, and has a heated chamber too, plus all the other comparable features of the Bambu if you look at them side by side

[@anthonylong5870]

You missed 1 SUPER MEGA release....The MONSTEROUS, INCREDIBLE, MASSIVE......Tinymaker resin printer. Its going to be Epic!

[@Shamol]

I want the Micronics SLS 😎

[@robertgcode965]

YES! I was about to say the same.

[@MakerMindNexus]

@PrintedSolid has had the Jessie Box for several years now and it was $34.95 when Dave started it. It is 2 random spools a month.

[@k-sell4065]

Got home and opened the box and what do I see a brand new MONOPRICE select mini 3D v2. I did a little research on it and find that it is a little over ten years old. I did the trial printout of the g code cat program and it works just fine😊 now I just need a computer or maybe because as I read further in the manual I see it has WiFi capability and iso and android compatible 😂

[@PotterKristen]

What about Bambu Labs? Werent they supposed to release a new product this year?

[@thenextlayer]

Unfortunately I no longer have a relationship with them. Hopefully one day we'll rebuild!

[@Noname-gz1gx]

​@@thenextlayer😅

[@RedMageGaming]

Just ordered Sovol's old 2 spool dryer, got a good deal on it, only $39 on a flash sale through Amazon, It's fairly dry in a my basement domicile that I live and tinker from, so I haven't been worrying about moisture too much, But, I have some PETG coming, and should probably have a dryer on hand just in case. And at this price, it beats out a cheap food dehydrator that I'd only get a single spool into anyway, provided the price isn't an indicator of reliability. And in the off chance someone still hasn't heard, Bambu doing an anniversary sale starting tomorrow, A1 Mini for $199 an absolute steal. I got mine a little over a week ago, and their offering to refund to a giftcard the difference on printers people bought and received on or after may 20th, and ordered before June 5th. So, those of us who bought a printer right before they decided to drop a monster sale on us. Just wish they were also dishing out for other things bought that are also going on sale. :/ woulda held off on my last filament order.

[@thenextlayer]

The old Sovol dryer isn’t very good to be honest. Also good tip about the Bambu sale!

[@RedMageGaming]

@@thenextlayer Not expecting it to be amazing honestly, if it can keep a couple of spools from getting waterlogged without burning the house down, good enough. I don't live in a super humid area, so I am banking on it just working well enough to maintain a couple spools as their being used. And if it doesn't work out, amazon is usually pretty good about returns. If it really sucks I'll just save up for that 4 spool Sunlu one that seems to be pretty well liked. [not sure where I'll put it, but I'll cross that bridge when I get to it lol]

[@StudioGallifrey]

3:16 hey, that's me!

[@4tification]

Great video, waiting for innovations from Bambu and Parusa.

[@thenextlayer]

Aren't we all?

[@JH-zo5gk]

You like blue tools more then yellow?

[@greebobrat]

E3Ds HF ObX Bambu Hotend is in stock, ordered mine sunday and received it today

[@thenextlayer]

NICE! They were out of stock for a WHILE, and I think the Revo HF Obxidian was in and out for a while.

[@Brandon-jf9cv]

Tangled filament offers a filament subscription

[@LestradeGames]

Profi box use to do filament subscription but they went out of business and didn’t tell anyone.

[@Skullyweb]

Printed solid does a filament subscription too.

[@Adam-qr4jj]

Great video. Re usable spools should have been around 5 years ago, such a waste of plastic. Would much rather be buying refills. Integreate some bearings into the reusable spool would be cool!

[@avivnachum9009]

Youre amazing man! Super cool video!

[@thenextlayer]

Thanks a ton!

[@alchemist6395]

Really interested to see what Creality do with their filiaments that they were going to redo to include RFID chips

[@thenextlayer]

I'm waiting for someone to just make an AMS that reads ALL the RFIDs... Prusament, Bambu, AnyCubic...

[@alchemist6395]

@@thenextlayer one can only dream!

[@xIsouLcruSHca]

BTT releases some great ideas but I feel like sometimes the execution lacks a bit, Panda lights are amazing, eventhough you have can't run the normal lights. However the panda jet still has SLS powder in the inner parts and panda touch and the P1S camera can't be used at the same time which is a big problem for me so its catching dust until they both work

[@looxonline]

What do you mean about the P1S camera not being able to be used with the PT at the same time? Like does your PT just stop working when your turn on the cam? Also, there were some early Panda Jets with a bit of SLS powder but it just blew out on first use and that was taken up with the supplier so all units should be free from it now.

[@xIsouLcruSHca]

@@looxonline I think as long as the panda touch is plugged in you can't connect to the camera, the panda touch does not stop working but you just can't use the camera at all, as for the panda jet, I got the bad first batch used a compressor to blow out the dust but still got dust while printing so maybe I'll try it again in the future when I want to do some printing with the fast and ludicrous mode but for now I'm done with the hassle

[@looxonline]

@@xIsouLcruSHca That is not right. The camera and the touch are completely unrelated. The touch uses the USB port for power but that port has no data connection so the touch can't really affect data. It may be that your AP board in the P1S has a fault that causes it to have a problem when there is power drain over the USB port. To test this theory you could connect the panda touch using an external, 2A USB supply and see if your camera comes back. There is no way otherwise that the panda touch could ever affect the camera at all.

[@ashers_workshop]

Very interested in the LH Slinger!!! Subscribed for it

[@timhoover1416]

Yes we want to see the clear Sun Lu resin.

[@MrBizteck]

That Sunlu Glass resin ... Im very very VERY intrested.

[@danny3man]

Man, duck creality. They purposely launched the smaller versions k1 so they can milk it.... the could've launched the 350mm just fine when they did instead of the smaller one.

[@lajoyalobos2009]

I actually liked the SV08 upgrade video

[@dueymiller3762]

I have order the SV08 and I'm waiting, waiting waiting for it to arrive.

[@3DWolfEngineering]

why wouldnt i have watched that video.... watching everything 👀 xD keep it up mate youre doing such a great job

[@Adamtherealboss]

Can you use the rabbit with a sonic pad?

[@thenextlayer]

Should be able to

[@Adamtherealboss]

@@thenextlayer thanks for replying. I’m tempted to try it out!

[@Tedlasman]

So, only featuring large, established companies, and not bleeding edge products like the beacon contact or chube hotend

[@alfredstergaard4660]

The k2 plus has a price of 1499, launched later this month

[@MrBooth1974]

Is that the official price ? I haven’t seen it yet…

[@JH-zo5gk]

I feel like ratrig 4 will be like a raspberry4 during covid. Sure listing exist but the item is a phantom. Then by the time you can get it 5 will be out.

[@thedodgelover08]

There was the profi box with filamentum that had a monthly subscription of 2kg filament and a "surprise" gift. However, they were very inconsistent with sending out the boxes and the company eventually went out of buisness.

[@trevorbrinston164]

Slant 3d’s tangled filament. Does subscription

[@charlie3074]

How recycling shopping bags in filaments ❤❤❤❤❤❤❤

[@thenextlayer]

Shopping bags are Nylon, I believe, and would make quite bad filament!

[@teabagNBG]

selling my p1s with ams right now so i dont have to go to low before the new one is releasing lol

[@adamzboss]

What an amazing time to be in 3D printing, thanks for the research, I hope I win the k2 plus lottery tomorrow 😫

[@janineharris3601]

I want a beginner friendly one but easy to use. ❤ 3d printer with resin

[@Noname-gz1gx]

At what price?

[@jacquelinelmiller]

That was an upsetting DeWalt comment 👊😄

[@chrisdixon5241]

Great video, though I suspect that's the DeWalt sponsorship killed :D Creality K2 - right product, wrong price (I say that as I Creality owner) Sovol SV08 - Great to see the upgrades and you could buy that and an enclosure for less than the K2? But please Sovol, could you make a tool changer material / colour changer rather than a many-to-one hot-end? The material waste for an AMS style is such a shame

[@thenextlayer]

Like I said... who wants DeWalt tools? ;)

[@willofthemaker]

Is that a PrusaTron?

[@thenextlayer]

They made me an orange one because that’s my jam

[@jazz_3909]

First time this early ever, love the vid too!!

[@donaldobi8149]

I was disappointed there was no updates from Flsun

[@handznet]

When companies copy Apexmaker X1 and make it more reliable? This is the only thing I want to know :D

[@danyveilleux3864]

No more contact with Bambu Lab? :( They are really missing something.

[@thenextlayer]

Hopefully that's a bridge I'll be able to rebuild, but so far, still in the doghouse.

[@noahkatz9616]

@@thenextlayer Bummer; what happened?

[@ultimatedude80]

Don't know why I thought this was funny but every video is another layer to your channel so I just though, Oh boy another layer when this got recommended to me today

[@gionnebunu]

I love your videos. Greetings from Gaza

[@thenextlayer]

Thanks habibi. Stay safe out there. Hope the war comes to an end soon. Love from Israel.

[@cjb5408]

The number of times you “linked” in the description, made me stop watching at 11:48. I was quite patient.😢

[@filipbyma6130]

2 467 prusametres?

[@thenextlayer]

Word

[@joeargyle]

I'll pass on the Creality junk.

[@charlestimko]

Best #ad ever...lol

[@agaldoo]

Creality literally copied bambu lab in all ways on the creality filament system which sounds oh too similar to the automatic material system 😂

[@thenextlayer]

Maybe but it also has a filament dryer

[@jacobjames8137]

man I've never been this early to a video 🤣

[@thenextlayer]

Legend!

[@daddysausage]

Same bro same

[@JohnColon-e2u]

Gulgowski Stravenue

[@alexanderkhalilieh7862]

Why do you change the title of your videos so often? I see it come up as one title and maybe 3-4 hours later it's another?

[@uskeeze2131]

It’s to see what works best with the algorithm.

[@DunRiteCreations]

TradRack 14 > ERCF V2

[@thenextlayer]

This is the first I'm hearing of it... Need to check it out.

[@DunRiteCreations]

@@thenextlayer would be awesome if you did a video on it. I only found out about it a couple weeks ago myself, and from what I've seen, it's quicker and more reliable than the ERCF, about the same price (or even a little cheaper), has all the seam features (buffer, filament cutter, etc), and does 14 filaments

[@robertwells3797]

Jist buy bambu they work

[@Hollowed_Wood]

Idk what to say (I usually don't get to the video this early).

[@thenextlayer]

Well done!

[@jessie38supercharged]

S1 anybody?

[@InsanityisSanity]

how many children have you slaughtered in the process of stealing their land?