The 3M™ Spray Adhesive advantage

Whether your needs are multi purpose, heavy duty, foam and fabric, specialty or maintenance, 3M has a spray adhesive solution for you. Learn more: 3M.ca/SprayAdhesives

[@dalegribble60]

I used 77 for the first time and thought it was great! What I like is the nozzle never clogged once over weeks of use. It's also has a very controlled spray. Stuff sticks man! USE IT...USE IT NOW!

[@patprop74]

I agree, Unlike other adhesive products and worst of them all are Rustoleum paint products which clog almost after first use.

[@MrTheHillfolk]

I'll guess that 90 is the "best" for my application. And that application would be gluing 1/2" (13mm) thick sound attenuation foam to an existing butyl sound deadening sheet with a foil cover on a car interior. The foam has open cell on one side and closed on the other. One note is when I see the sound attenuation foam used in a standby generator housing they usually put the adhesive on the closed side of the foam. Did I guess right?

[@joeylabelle9798]

Which would be recommended to use on a surface which will get wet but can also be removed if required?

[@3MCanada]

Hi ! We would recommend the Hi Strength 90 Spray Adhesive. While we don’t offer a waterproof spray adhesive, it will hold up if it’s submerged in water for 15-30 minutes. The downside is that since it is a permanent adhesive it will be difficult to remove. We don’t offer an adhesive with these properties that is also easy to remove, unfortunately.

[@onelife829]

Why can’t I get any in California

[@PawlDunken]

I might get this to mount my spoiler on my car

[@nunkap8874]

Which one would I use as extra adhesive for peel and stick flooring?

[@reza_dc2]

how come some of the cans have a extended nozzle and some don't? I want to make a purchase with the extended nozzle.

[@3MCanada]

Hey there -- Thank you for your comment! They 3M™ Spray Adhesives are tailored to specific needs.The extended nozzle on 3M™ Spray Adhesive cans allows for more precise and controlled application, while cans without it provide a standard spray pattern for broader coverage. For product availability and where to buy, connect directly with our team using: s.3m.com/tflc6k4h and they will assist you further. Thank you!

[@earlc5990]

Nobody is asking how long drying or setting time is?

[@cliffdariff74]

read directions

[@lorraine3499]

if you use this on fabric wil you hold in the washing machine or will it come apart? thanks

[@makrokrubret6768]

Im having problem with the moisture wall in my room with the ambient temperature at night 25° , my cable organizer with adhesive keep falling. I wonder if this could work.

[@ThatanOmega]

is hi strength 90 water proof? it will be used in an environment that is consistent wet/moist

[@arm2644]

It's incredibly that 3M has lowered the quality of the super 77 adhesive. Y used the super 77 in 2015 with the old presentation can and the bond was very strong fast and reliable. Now it isn't worth buying since it does not even cure and it's bond's like chewing gum and crates a black sticky surface like asphalt. I am really disappointed of 3M super77 and don't recommend buying!

[@chemicalspore]

What do you recommend

[@Pinkielover]

what should i use for a ipad case The weather plastic has come apart.. I have a bottle of 3M 77 I'm not sure if I should just use that.. Don't feel like buying more or huge can

[@3MCanada]

Thank you for your comment. You can use the 3M™ Super 77™ Adhesive on your iPad case since it is a versatile adhesive that bonds a wide range of lightweight materials and offers a fast, aggressive tack for a quick bond that reduces set time. We also recommend you go through our Safety data sheet to avoid any misuse through: s.3m.com/c3zmz7 Hope this helps.

[@billytheweasel]

i wonder about all the scarcities lately. You can't get this stuff in 2021.

[@CamilaTinedo]

Which one can I use to adhere a mirror to metal surface?

[@3MCanada]

Hi Camila - Please reach out to our Assembly solutions experts via s.3m.com/w196kczi and they will assist you with all product-related inquiries. Thank you!

[@wolfnrus]

I want to apply fabric to the metal walls of my horse trailer. Which 3M product, please?

[@3MCanada]

Hi, please contact our Industrial technical team at 1-800-265-1840 x2881 for help choosing the right product

[@shweetiepetina6924]

How do I either keep spray adhesive cans from clogging or buy a one time use/smaller can?

[@3MCanada]

Thanks for your question. We would suggest purging the can after each use.

[@KeepingUpWithRene]

Hi if I’m doing fabric to a polyester material what should I use?

[@3MCanada]

Hi Ayesha, thanks for your question. We recommend using our 3M™ Super 77™ Multipurpose Spray Adhesive and applying it to both surfaces.

[@lisagonzalez8570]

Which spray works on pool noodles (buoyant polyethylene) when gluing them together?

[@patprop74]

The 80 would work well, so would the 90.

[@billytheweasel]

you must have a LOT of pool noodles to glue, this 80/90 isn't cheap.

[@miltonbrown7275]

Which is recommended for applying indoor/outdoor carpet to the side of aluminum?

[@3MCanada]

Hi Milton - We recommend our 3M™ HoldFast 70 Spray Adhesive for this application: s.3m.com/8sk48z

[@leejy5]

Which one would you recommend to finish fabric stuff such as tufted rug or punch needle back?? It needs to be still flexible instead of stiff🌞 thanks🙌🏻

[@3MCanada]

Hi, thanks for your question. We recommend the 3M™ Foam Fast 74 Spray Adhesive for this application.

[@diaperdood1]

Does this off gas once it has dried? I plan using it inside the hvac system for fiberglass lining

[@3MCanada]

Hi Jeffrey - Thanks for your question. The Super 77 gives off outgassing as the VOCs flash off. Once the VOCs have flashed off, it will just be a solid after the drying process but will still have an odor to it. As an alternative, we would suggest the Super 77 Low VOC, as it will have less odor and outgassing on application. It will still have the same adhesive properties as the standard Super 77.

[@DaytonaBlueHr]

Can i spray a little bit of this on my Valve covers to make the Gasket actually stick to the valve cover and not fall off when i try to flip the Valve cover and install it? Or do you guys have a spray similar to this for jobs that involve motor oil

[@3MCanada]

Hi - Thanks for your inquiry on 3M™ Spray Adhesives. Please contact our Industrial technical team at [e-mail] or by phone at 1-800-265-1840 x2881, our team will be able to answer this question and any other questions you might have.

[@Comm0ut]

Use the classic #M Weatherstrip Adhesive from your local auto shop! It's been called "gorilla snot" (after the yellow version) since it came out decades ago and dirt bikers discovered it. It's also available in black. I'm a sealant geek and the 3M yellow headliner adhesive works too but do yourself a favor and use the tube instead. Glue the gasket to the cover but not to the engine so you don't have to fight to clean it off the next time (even if you don't plan on there being a next time). Every old mechanic knows about it. Gasgacinch is similar and brushes on. Lay your gasket on clean cardboard, coat evenly then stick to the valve cover. Wear disposable gloves! With the cover upside down (in a secure position) I poke the cover bolts through from the gasket side to keep it centered on the bolt holes.

[@guillermoordonez4471]

Which one do You recomend For indtalling a carpet on a vehicle

[@3MCanada]

Hi Guillermo -- Thanks for your question! To ask one of our 3M Canada Assembly Solutions Experts, visit s.3m.com/1pl13u Thank you! ☺️

[@212sean]

I need to glue memory foam together. Is the #74 the right adhesive for this material? And will it still be soft after drying? I don't want to feel a hard seem where I glued it together. Thanks.

[@3MCanada]

Hi - Thanks for your inquiry on 3M™ Spray Adhesives. Please contact our Industrial technical team at [e-mail] or by phone at 1-800-265-1840 x2881 for assistance choosing the right product for your application.

[@faithwheeler4724]

So I don't know if I got the right thing I painted an rc bodie and would like a plastic like laminate over the bodie for smooth and tough finish did I get the correct priduct

[@3MCanada]

Hi - Thanks for your inquiry on 3M™ Spray Adhesives. Please contact our Industrial technical team at [e-mail] or by phone at 1-800-265-1840 x2881 for assistance choosing the right product for your application.

[@ajcruises5777]

Looking for an alternative for 3M 61 for drywall corner bead. . I can't find it anywhere near me. What other products could I use?

[@3MCanada]

Hi Andrew, thanks for your question. Unfortunately, we do not have a product to offer as a replacement or alternative to the 3M 61.

[@cm6281]

Which one to use for foam fabric in fiberglass.

[@3MCanada]

Hi There! Super 77 is the one we’d recommend for this job!

[@nikkiissp4888]

I want to glue fabric to my shoe 👠 which glue do you recommend please.

[@3MCanada]

Hi, thank you for your question. Please contact our Industrial technical team at [e-mail] or by phone at 1-800-265-1840 x2881 for assistance choosing the right adhesive for your specific application. Thank you

[@dor1505]

It is glow?

[@baxallien]

Metal sheet to metal sheet? Which one is good ?

[@3MCanada]

Please reach out to our Assembly solutions experts via s.3m.com/2fuznzz2 and they will assist you with all product-related inquiries. Thank you!

[@furstenfeldbruck]

I'm totally going to spray this on someone's hair on Halloween

[@OGMagg]

Thats an easy way to lose a couple teeth

[@UserName-zb8ql]

epic works great almost sawed a boat in half with it i could have died

[@kjam87gxp]

Damn

[@Shrekeo]

I have a gel/resin type sticker lifting on a corner on my motorcycle, was thinking of using primer 94 to re-stick the corner but am concerned about possible removal issues in years to come, do you have a product to remove primer 94 from vehicle paint? Would the 3M 80 spray adhesive be more suitable, or any other of your products? Thanks for any advice.

[@3MCanada]

Hi, thank you for your question. Please contact [e-mail] to get assistance choosing the appropriate spray adhesive.

[@annaxiao67]

Hello, I am Anna from Dayang chemical technology co., ltd. our company has been specialized inspray adhesive for 20 years. I have the products you need here. if you need them, you can send them to me by email:[e-mail]

[@jackiem.dearroyo8739]

@@3MCanada hi, how to open the spray bottle pls?

[@ShawnBoike]

Which spry adhesive is the Best & strongest for Marine Canvas Bimini Tops

[@3MCanada]

Hi Shawn, thank you for your question. Please contact [e-mail] to get assistance choosing the appropriate spray adhesive.

[@ShawnBoike]

@@3MCanada Thank You I will.

[@kandicerechais2136]

Which ones do you recommend for a balloon business

[@3MCanada]

This would depend on the application. Please contact our Industrial technical team at 1-800-265-1840 x2881 for assistance.

[@danviefermin6202]

How much asap

[@joeshoe4940]

Marine vinyl fabric to glass?? Any one ? Have a good idea ?

[@3MCanada]

Hi Joe - No, the product to consider for this application would be 3M™ Rubber and Vinyl Spray Adhesive, 80: s.3m.com/kmdbaq

[@junky9]

Used the 90 for car interior.... wears off in days.. crap

[@chelleholmes1012]

Does it have a odor?

[@3MCanada]

Hi Chelle - Thanks for asking. Yes, the standard Super 77 has an odor to it, while the low VOC version has less of an odor and outgassing.

[@johnb9187]

@@3MCanada less odor equaling less quality

[@transkryption]

What I want is more proper physics words Like "Aggressive bond" often implies a brittle bond Eg cyanoacrylate. So sudden failure under pressure? Inflexible? No plastic,-deformation. When you whip out the foam who should pay attention? How good is it with sound? How good is it insulating heat what sort of foam is this Our is it "just bog"

[@carrinho15gaming81]

mobile gaming

[@mrskhatijah9127]

Gam xkuat