The 8 Parts You Need For Your Ford F150 Utility Truck Build - The Haul

[@americantrucks]

What are the must-have parts on your utility focused build?

[@Star-xq4tp]

AmericanTrucks Ford Winch, hitch, auxilary front and rear lights, tool box and for sure a power inverter

[@willharkcom424]

Used a glad hand on my bumper with a shut off valve all weather capable that way. Opposite side glad hand has your normal air hose fitting on it.

[@k9runner]

What's the make and model of those tail light black out covers?

[@workingcountry1776]

Backrack was a must after busting my window. KYB MonoMAX shocks, LT rated tires(dont pop as easy) bed liner, tool storage, Dickies seat covers. A locking diff and skid plates for getting around on construction sites and the land fill is on my wish list but probably won't happen til I buy a "new" truck, hopefully an FX4 with that gear already.

[@joelcarter2045]

An 8 ft. Bed with drop-in bed liner.

[@losersseekhelp]

Nice to see some SuperCab love

[@C8guy84]

Those step rails should have a third bracket. They appeared to sag in the middle a good inch plus when stepped on.

[@boostedandbagged9874]

Yeah I wouldn't use those they look flimsy as hell

[@lockback]

I've purchased and installed the AMP Research BedStep2 based on this video. Absolutely great product that solved a real problem - bed access at the side of you truck bed. Assembly and installation was easy. The whole process certainly will take less than and hour. Installs on existing frame with no drilling or modifications. Very, very nice! (A bit pricey.)

[@TheSpeedula]

Chrome socket on an impact gun? I like to live dangerously as well. What's the wheel/tire/lift setup? Really like that look.

[@samh7982]

My build would be upgrading the alternator to 440 amp alternator, install waterresistant plug in jump start receptacle in the front grille, standard 12v receptacle on both sides of the bed, and single 220/240v receptacle at the rear bumper.

[@eddybrownII]

Samuel Hur I'd like to see that build

[@kevinjames6087]

Heck yeah brother I'd be first to copy if you make it work out.

[@TheChip224]

Honestly as an owner of a construction company with the need of work trucks, this is pretty much the set up I use for some of them, instead of the ladder rack, I’ll throw a tool box and instead of the front bumper I’ll just put a brush guard, I do put cheap mudding tires and wheels so the employees can have fun on the dirt from time to time

[@ColdWarVet607]

"Iron Cross front bumper, absolutely bullet proof.....God Help the Deer You Run Into" All Time Best Line of all American Truck Video's Ever! I wound up spitting soda out my nose from losing it when hearing that.

[@americantrucks]

Thanks for watching! -Zach

[@wrestlinbulldog]

As a detailer. The husky mats are amazing. I have seen how great they work. Obviously as a detailer I want the vehicle as clean as possible, but with a husky liner or wether tech mats. My job seems kinda pointless as far as the floorboards

[@forpointsix4.678]

Steeps bending in the middle! How solid can they really be?

[@americantrucks]

*Steps. And believe me, despite the small amount of movement from a 200+ man bouncing on them, the barricades are very solid. -Justin

[@danielnapast4955]

All steps bend, the ones from Ford bend too, and technically they flex since bending implies that they don’t come back to original position.

[@lonelamon]

Daniel Napast My factory steps on the 2012 lariat don't bend. And I weigh more than Justin.

[@bryantrodriguez4953]

Ain’t that the truth 😂😂 take your cheap ass steps somewhere else. 😂

[@jamesbaucom9295]

Ink stained canvas My factory steps on my 08 lariat dont bend and in a 320lb man

[@joelitty6103]

Wow I just sub to this channel and read through the comments. I believe this is more of a sales ad. Most of you are going to do things your own way. This is just a great way to see options and ideas for your truck. Looking forward to more builds and inspiration for my rig. Keep up videos coming Justin.

[@diegogutierrez1540]

Damn I feel bad. Everyone loves to roast justin and his builds. 99% of you just wish you could afford something this nice. Nice build justin keep up the good work

[@americantrucks]

Haha- its all good. There will always be a few people who are all about that troll life, meanwhile I'm just going to continue to do my job and keep pumping out videos. -Justin

[@Rush23]

I can afford allot of stuff for my f150 but getting past the wife for new toys is a no no lol

[@jayman8806]

I really like the Duha underseat storage. If I could find a way to lock the seats down it would make a great place to store valuable items.

[@dakotapeek6904]

Drill a hole in the metal that moves when you lift it and padlock it

[@dbstelly]

Personally I would of purchased a wheel to wheel running board so no side step would be needed. Also why get a silver roof rack when all the silver on the truck is blacked out? Just my preference.

[@jordanjohnson5784]

That bed step is awesome... I have a 2015 Sierra SLT, I'm gonna look into whether or not they make something similar for my truck. That would be helpful!

[@adrianv9437]

What size and brand of rims and tires are those? Awesome looking!

[@TxMx214]

Honestly this is a nice looking truck as it is built, for me the roof rack would work if going camping with a roof rack tent, but for normal use I’d rather go with a tonneau cover. Either way I love the way the truck looks for being a base model.

[@StuartBreland]

I want those rims for mine. The under bead air compressor wouldn't be a bad idea but I won't lose my spare tire for it. That ladder rack should have been black but I'd rather a shell with a cargo top than the ladder rack. What should have been included is the latch that lets you swing down the back seat. I put one of those on my 13 and it makes for a great storage area.

[@BBaldwin]

Im sold on that Duha box! Done deal!

[@kilogangstafuzz]

I'm interested in the suspension lift and tire size. Really enjoy the stance of this truck.

[@americantrucks]

4" Zone Lift kit with 20" Fuel wheels and 35x12.5x20 Fuel Mud Grippers. -Justin

[@ChrisShiznet]

How is the iron cross bumper going to effect the CAC? Doesn't Ford say not to run a plow on it as well?

[@americantrucks]

Its not ideal but there is flow to the charge air cooler. However since the goal of this video was to appeal to all 2015 and newer trucks it made sense from a 'utilitarian' aspect. -Justin

[@kawiracer475]

They will ruin the engine with that bumper

[@carsonkomac7421]

@@kawiracer475 it's a Ford it's already ruined

[@243wayne1]

@@kawiracer475 -Wrong. Don't be stupid. Class dismissed.

[@kawiracer475]

@@243wayne1 Ask any tuner. They say not to even put a small light bar in there. You're about 2 years late to the class buddy.

[@michaelfoss82]

Question: Does this (or most others) bumper that covers the intercooler intake restrict the airflow enough to hinder performance? I’ve wanted an off-road bumper with winch but everything covers that intake.

[@nathanaelhall5780]

I was wondering the same thing. Seems obvious that it will inhibit the intercooler. I really like the look though.

[@bobbysweeney5377]

If you ever need a beautiful 13 f150 fx4 5.0, black with appearance package, to beef up in any way, I'd be more than glad to assist. People would LOVE to see you install a supercharger. I'm sure of it!

[@Logan-pc1lm]

At 12:28 I see rubber or well not carpet, did you guys do a mod?

[@dant4786]

Man. From reading the comment section you’d think you broke into someone’s house and overhauled their truck without permission. Bizarre world we live in.

[@americantrucks]

Haha, right? KZbin and comment sections in general have a way of bringing out the best but usually the worst in people. -Justin

[@cricketscreations524]

Yes but I’m sure these guys use all these comments as good feedback for there next video and ideas

[@dant4786]

Crickets Creations Thats a solid point.

[@Alexanderofthe9th]

Truck "guys" are the biggest snowflakes in the automotive industry. Everything triggers them.

[@dant4786]

Alexander Chavez Hey man! You take that back! I’m a truck guy and nothing triggers me! Haha

[@electrohacker]

1 zinc does nor stop galvanic corrosion, it makes it worse 2 mounting the switch and gauge under the bumper will rust it away and corrode the contacts in the switch 3 that bumper is really cool if you dont have chrome, nothing bad to say about that :) 4 why did you opt for not putting a mat over the front hump? and no rear mats? This seems like a huge oversight. I really love the idea of the onnboard air, but I never see anyone address the 20 ton gorilla in the room. That is that mounting the pump and tank under the vehicle will lead to premature failure from rust and corrosion. I never see any interesting ideas on how to protect it.

[@StuartBreland]

Maybe use bed liner on the air tank. For the compressor I'm not sure if that would be such a good idea.

[@americantrucks]

I'm sorry but you are simply incorrect about your statement towards zinc worsening galvanic corrosion. While not perfect (aluminum to aluminum) Zinc and Al are extremely close on the galvanic table while the 'Anodic Index' falls under .25V which is acceptable in outdoor/wet/salty environments. And in regards to your statement about the on board air, as stated in the video you can mount the system anywhere you see fit, we just selected the spare tire area for the sake of the video. -Justin

[@electrohacker]

We'll see when whoever gets that truck has giant holes in the bed in 5 years

[@americantrucks]

If you have a scientific rebuttal or proof stating the contrary, I'd love to hear it. And I'n not being a dick, I'm genuinely curious. -Justin

[@sociopathmercenary]

electrohacker Zinc coated screws are better than stainless screws in joining aluminum. However, your only going to have a galvanic reaction if the materials are touching and there is moisture present. Using bolts with Teflon washers or sealing the connection from moisture might help... but welding the aluminum directly is the only way to eliminate the problem.

[@jakejohanson6562]

Glad you took off those 90s style side steps.

[@patmat.]

The hitch is what I like best. I wouldn't put pneumatic equipment in the dirtiest least accessible space, nor get rid on my spare tire. Also the weak fixed aluminium frame gets in the way when climbing on the bed. Has to be better options. For the fixation great point about Galvanic corrosion but use stainless steel bolts (of same strenght) with insulated washers, not zinc plated self-drilling screws !

[@NordicViking88]

I WOULD SAY A BED LINER WOULD BE A MUST HAVE FOR A UTILITY TRUCK OR ANY TRUCK FOR THAT MATTER TO PROTECT AGAINST DAMAGE. AND WHAT HAPPENS WHEN YOU GET A FLAT NO SPARE TIRE UNLESS YOU PUT IT IN THE BED PERSONALLY I PUT MY AIR TANK IN BEHIND THE PASSENGER FENDER WELL AND HAD THE AIR COMPRESSOR IN THE ENGINE COMPARTMENT MORE LINE IS REQUIRED BUT RAN IT DOWN THE FRAME RAIL AND LOOKS NICE AND CLEAN BUT WILL REQUIRE A CUSTOM BRACKET MOST OF THE TIME TO MOUNT IT IN THERE

[@genius-no5sl]

This truck looks awesome !!!! Your builds are really slick !

[@americantrucks]

Hey thanks! We really appreciate the love! -Zach

[@genius-no5sl]

That truck looks awesome .

[@benhenson3910]

How is carrying a 35 in the bed at all "Utility Build"

[@advguy84]

What size zone lift does the truck have?

[@americantrucks]

4" -Justin

[@advguy84]

@@americantrucks Justin, thank you for the quick reply, its actually an honor lol you guys are awesome.

[@americantrucks]

Thanks Brandon- Appreciate the kind words man! -Justin

[@apocailypse3766]

Should have painted that rack black

[@michaelczarnecki3115]

What kinda of rim/tire combo are on that truck?

[@americantrucks]

Fuel Trophy wheel 20x9 wrapped in the Fuel Mud Gripper 35x12.5x20. -Justin

[@paulbormes6037]

You happen to know the offset?

[@zb6618]

Paul Bormes looks like 0 offset to me

[@Spinal2111]

Those box side steps are a neat idea if you didn't opt for the factory option. But being more expensive than the factory option, they are way over priced, and only come with a 3 year warranty.

[@adamlucero5916]

What brand are those tires and how do they hold up for a daily driver ??

[@brendenfunk1389]

Ya until rocks and dirt get in that air coupler, then that won’t slide open to put your tools on

[@21April853BC]

Brenden Funk put a cover on it.

[@garretr4488]

Brenden Funk same thing with that gauge and switch, would get destroyed so fast

[@grguy793]

Thanks. nice F150. Maybe a small level too. Side step is a good idea

[@ian_lambert-knight]

You can also use plastic washer things for your screws on top of the zinc.

[@joncardinal7641]

Whats the lift on this truck???

[@cschmi9624]

The husky floor mats are great! I'm not sure why anyone would go with Weathertech when Husky is just as great for $100 less!

[@americantrucks]

Thanks for watching! -Zach

[@andrewheimerich8581]

I get that some people like the replacement bumpers without uprights and headlight protection(which I myself prefer having them), I just don’t see how that protects your truck very well against a deer considering it could just somewhat roll on the bumper, and smash your grill and headlights.

[@israelmartinez9601]

Tanks you body for ‘‘tis video I had a 2004 F-150 4x4 v8 tritón 5.4 liter please se me some brochures about this job you done

[@brockthomson36]

“God help the deer you run into on the highway” or the Prius

[@isaacrush9184]

@AmericanTrucks Ford what is the lift and tires on that truck?

[@510mundo]

Notice he said "220lbs of solid muscle." Way to flex on us bro.

[@americantrucks]

Its a joke....-Justin

[@510mundo]

I know, I was jk dude.

[@el-hp1lj]

220 at your height is considered overweight. trust me i was heavy into bodybuilding. i was around 224 at 6ft and i looked good outside but inside wasnt healthy. make sure your bloods check out. i had fatty liver disease from too much caloric intake. you seem like a really good guy and just want to make sure silent health issues arent creeping up

[@OvaHendrix-j4t]

Husky makes great quality tools an all around ones stop shop

[@Painfulwhale360]

I didn’t hear it in the video if it was mentioned but what height lift kit was put on?

[@carsonkomac7421]

I get that most of those things are tacky but some people like that and Justin just wants to make a good video. We all have are own opinions and some people just need to keep their opinions to themselves. I personally don't like to much of the build but it was fun to watch. Just ignore all the hater's. They are just jealous, keep up the good content Justin

[@americantrucks]

Thanks Carson- we know its impossible to please everyone, especially on the internet but we'll keep doing what we do. Thanks for watching! -Justin

[@brianlanning836]

"We don't want to bring in a real gun for HR purposes." Sounds like you need to hire adults with common sense, starting with HR.

[@stephenhamilton3303]

youtube woul;d demonetize it if it were real

[@jeffjob8265]

It’s a sad world we live in now

[@briandavis5639]

Is there a fog light kit that fits with that bumper? Looks pretty sweet !

[@dakotab825]

The iron cross was pretty cool ngl lmao

[@natestanton6037]

Dude mentioned galvanic corrosion! As a welder, that was worth more than most of you realize 😉 👍

[@americantrucks]

Haha, thanks for that! -Justin

[@eginteractive]

Ford doesn't pay attention to it. For YEARS they were using uncoated bolts to hang up aluminum exhaust shields, and then the shield ends up with huge holes where the bolts sat and would fall off or rattle around. Then you'd have to use huge fender washers to try to keep the thing held up.

[@Lorensfishpatrol]

Did that front bumper cause air intake temps to rise due to blocking inter cooler

[@TedPalmer]

Good video. However, moving the full side step back a foot would have likely provided enough boot room so the (very cool) Amp side step was unnecessary. I like the compressor, but how safe is compressed air in a collision? BOOM?! Also, no inside blueprint/gun rack? No outside locking tool box(es)? No cold air intake mod, etc. If you ever have done commercial or residential construction, you understand the value of these suggestions. Thank you for pulling together such a nice video with some very cool mods!!

[@brendenfunk1389]

Same with that box step. Rocks will get in the moving parts and it won’t open

[@americantrucks]

Amp is real good when it comes to build quality- I'm sure IF you encountered an issue (which I doubt) they will honor their warranty, no questions asked. -Justin

[@infidelbillsripramot9814]

Love the front bumper and 👍🇺🇸

[@HighRidgeHandyman]

Ladder goes on the passenger side. When you unload it you wanna be off the roadside so you don’t get whacked by a car.. nice build!!

[@adamrosalfestyle]

what kind of tires are on that beast?

[@wayoutthere7952]

What tires and rims is the truck setup with?

[@danielcuevas1044]

how many inches was the lift on this one.

[@DJPacoRamirez]

Love it. Do off-road frontier!

[@Richard-ky8dw]

Nice truck I'd take it

[@rustypliers74]

Can you send a link for the wheels and tires Justin

[@Hot_Shot_Movement]

What can you do with the 2019 raptor to get more horse power out of it

[@americantrucks]

Tune and an intercooler will be the best bet. -Justin

[@Gunnvulcan]

2:08 he got us.

[@jarobiwatts3601]

Hahahahahaha

[@workingcountry1776]

In NY that air system would be in rough shape due to sand and salt spray. Also modern trucks are hard enough to use for work without a lift kit.... they are so tall

[@americantrucks]

As stated in the video, there are a number of places you can install an on board air system. And I agree with you on the lift, but there wasn't much we could do about that one as all of our shop trucks already have a lift. Its also why I said in the beginning, 'try not to pay attention to the lift kit and tires as the parts in this video are meant for all 15+ F150's.' -Justin

[@theeasternfront6436]

But not in Phoenix.....

[@CheeseOnEverything]

what rims are these?

[@mikebee515]

Thanks coach McVay

[@roush3836]

What tail lights are those?

[@mursalot]

like the bumper, but the front tow hooks are useless with that thing and i need a front license plate

[@jakejohanson6562]

Decent looking bumper too. Doesn’t look like a dumpster was bolted to the front, like so many other bumpers

[@americantrucks]

Agreed. -Justin

[@donwanacu]

Details on the lift kit, and wheel & tire size plzzzz

[@americantrucks]

The truck in this video is utilizing a 4" Zone lift kit along with 20" Fuel Wheels and 35x12.5x20 Fuel Tires. -Justin

[@mackenziepeek9317]

I'll just get side steps and running boards from the factory because then they are guarantied by ford and their warranty for about the same price

[@243wayne1]

Yep. AND, they don't fuckin' *FLEX* when you stand on them. Class dismissed.

[@tmk5522]

Needs a toolbox to be a work truck I don’t like mounting a truck box to the bed because I need all of my bed space in the weekends. So I strap a gang box to the front of the bed until I want my bed back for hauling. Nothing worse than a back seat full of sawdust and tools

[@hbrui899]

love your videos bud

[@americantrucks]

Thanks Hunter! -Justin

[@rayg5445]

Something essential was left out. A tool box! Great video though

[@americantrucks]

I know I know- and as much as I hate to admit this, we didn't have a quality tool box option on the site at the time this video was made. However we are in the process of adding them now. Thanks for watching Ray and for taking the time to comment! Have a good one! -Justin

[@rsparkman123]

What size are those tires?

[@ApostolosR]

Is that a factory colour?

[@johnwatson9848]

Apostolos R Yes it's called lightning blue my 2017 is the same color

[@omarmatta6893]

Which’s the name of that thing you under the back seat?

[@TonicofSonic]

A tool box that is half compressor and half tool box is way more utility than a unit that will take damage the first time a little clown car rear ends the truck )which will happen several times in the life of the truck) and displaces the spare tire from the most practical place imaginable for it.

[@johnm.browning4759]

What tires are those?

[@americantrucks]

Fuel Mud Gripper in 35x12.5. -Justin

[@jarretthorton3399]

Great videos! Keep it up

[@americantrucks]

Appreciate that Jarrett- we will! -Justin

[@BellsRidesAboardSeaBoss]

Hi I’m a new subscriber I have a 2017 F-150. Do you have a lift on your truck

[@americantrucks]

Yes, this truck is lifted 4" from a Zone Off Road kit. -Justin

[@Tainted79]

Great video and a bunch of good ideas. wish I could up-vote this video more than once.

[@americantrucks]

Thanks Tainted! -Justin

[@Kaljor92]

Nice bumper but the design seems flawed now it’s restricting the airflow into the inter cooler that keeps the turbos cool...

[@Mike_Jones68]

Im glad someone pointed that out...all bling to cause probs...im still lookin for a steel bumper that doesnt restrict the airflow

[@jackkirkpatrick2849]

Are you really 220 pounds? Lol. Damn, I'm 180 of twisted steel but now I feel small. Haha seriously tho, great video. I just bought a 2018 F150 super crew and I cant wait to do some mods. I really appreciate your videos. Thank you for the great content

[@americantrucks]

Haha, 210-220 give or take. Thanks Jack, appreciate the kind words sir! -Justin

[@falconeye577]

I see FAIL #1 You did not get a spray In Bed Liner but I like the On Board Air, would like to know other locations for mounting and is the bumper a straight BOLT ON

[@sethjackson6238]

What lift?

[@dannyroy4411]

well Canadian! you better think twice before buying here! cost me almost 3 times when receive my parts!!

[@nfg_coyote4615]

So it’s okay that the air compressor can get wet?

[@americantrucks]

Yes- as long as you don't use it while its fully submerged, absolutely. -Justin

[@nfg_coyote4615]

AmericanTrucks Ford thanks for the reply. I’ve seen guys put the compressor behind the rear seat but i keep my strap, hitch, jumper cables, etc back there

[@americantrucks]

Yeah I originally mentioned about putting it under the rear seat (but they cut it out) although keep in mind, the compressor can get a little warm when worked hard. -Justin

[@nfg_coyote4615]

AmericanTrucks Ford thanks again! Keep up the great content

[@charlesseitzinger8106]

Got mine in the bed, against the side wall with a plating to protect from impact. Combine with swing out saddle boxes for all your basic emergency needs.

[@juanc9354]

What are those rims called?

[@americantrucks]

They are the 'Fuel Trophy' in a 20x9. -Justin

[@Quagmire420]

Damn Dude this truck came out looking BADASS!! I need something like this for my job. I do framing/carpinteria. I use all kinds of ladders and power tools. Where did u get the lug nuts that hold down that mount for the ladders? I just want to take the advice you said about the problem with wrong screws on the aluminum truck.

[@annoythedonkey]

Those steps need an extra support bracket in the center

[@jasonswift7098]

Why would you need a 2 5/16" (58mm) ball for? 50mm (2") is the most common size of trailer towball's

[@brycelaing7603]

Jason Moyle very common ball size for larger trailers.

[@SamCyanide]

That hitch was really cool but I clicked the link being scared that it was going to be like $150 and it ended up being $300.. dang that's a chunk of change for something like that.

[@americantrucks]

It is but its hard to put a peace of mind value on knowing you're load is safe and balanced therefore (hopefully) not leading to any white knuckle situations on the road. -Justin

[@joebuddensvoicecoach3060]

You completely had me until you put the air tank/compressor under the truck.. but aside from that nice video.

[@americantrucks]

Your complaint is a popular one and that's why I tried to stress the fact that you could put these things in a number of places, including under the truck. In fact I have a Jeep buddy here at work who has this exact kit in his engine bay and has been through mud, sand, etc for the last few years and the kit is still going strong. -Justin

[@alexanderlovato4902]

Plan on replacing that air hose as soon as you try to extend it out. Trust me.

[@mountaindewjoe]

"Trying to build an all encompassing truck is just isn't the best idea, instead we're going to build the Swiss Army knife of F150s".... because those are two very different things and we are going to do one of them poorly, how hard can it be? (Jeremy Clarkson sarcasm voice)

[@americantrucks]

You conveniently left out a word to help shape your argument "all encompassing WORK truck". Work and Utility are, in fact, two different things. -Justin

[@mountaindewjoe]

AmericanTrucks Ford my bad, you are completely right and this is perfect