The all new jackshaft opener from Liftmaster

[@randolfonunez]

Hi sr im having problems to link the smart light to the motion sensor . Can you help??

[@horizonoverheaddoor2313]

what model opener do you have?

[@rb8049]

You may have to press the reset button on the LED. You can always call LiftMaster for technical support.

[@rb8049]

Call LiftMaster tech support. They will send new logic boards for free if you have issues.

[@NO_OPEC_NO_PROBLEM]

So buy this or Chamberlin RJ0101? They look identical

[@rb8049]

This one works great with the latest update. No issues whatsoever with latest logic board revision.

[@grizzlyinvesting]

I herd these are a nightmare since they don't have the cable tension monitor

[@horizonoverheaddoor2313]

We have installed a handful of these so far and seem to be having better luck without the tension monitor. Now these openers do run best with at least 15" horizontal rails and a very well balanced door.

[@CanadianDoorMan]

There’s definitely big issues with these. My supplier is giving out new boards because liftmaster apparently fixed the bug. Liftmaster is aware of it at least.

[@rb8049]

The current version is great. Works consistently. They did an update to their logic board which solves the latest excessive force issue.

[@CanadianDoorMan]

@@rb8049 I installed one a month ago, and it had this issue. Not sure when this was resolved or how long this motor was sitting in a warehouse. But definitely hoping this issue is fixed for good.

[@Joe_CT]

Don’t buy one of these. I had nothing but problem with mine and had to uninstall it and go back to my old opener. So many people are having issues with the model.

[@horizonoverheaddoor2313]

Hi Joe! So yes these openers can be trouble for people, one of the biggest reasons is because of the radius of the rails. 15" radius is recommended from spec on LiftMaster and anything up from there. Hope this helps!

[@rb8049]

Call LiftMaster tech support. They will send new logic boards for free if you have issues.

[@CanadianDoorMan]

I called liftmaster because of this issue a while back and they recommended profile 5. It works but unfortunately the door will not recognize slack in the cable. That being said, the motors have a real slow start and as long as the door runs decent you won’t have a problem.

[@rb8049]

I installed new logic boards from LiftMaster and have had no issues. I love them.

[@CanadianDoorMan]

Good to know. Thanks for the info