THE BEAST MODE EXO-CAGE SURF | UPDATE/WALK AROUND

Been a while since the last update on the surf. So here it is! Packed full of bar work including an exo cage!
🛎🛎DON'T FORGET TO CLICK THE BELL ICON WHEN YOU SUBSCRIBE TO GET NOTIFIED ABOUT ALL OUR UPLOADS!🛎🛎
🚨-----------------BE SURE TO------------------🚨
SUBSCRIBE | SHARE | COMMENT | LIKE
👍🏽LIKE US ON FACEBOOK!
boostedbuiltgarage
🖐FOLLOW ON INSTAGRAM!
@boostedbuiltgarage
💸GET 10% OFF TIRE STICKERS!
www.tirestickers.com & use the promo code 'bbg10'

[@boostedbuiltgarage]

Ok for everyone who has noticed a "crack" in my rear axle at 15:08. You'll be pleased to know that I especially went to the workshop today and checked... It is a factory weld (with bad shadowing) not a crack! So don't freak out!😂

[@outpostone-oh-five8529]

documenting all of the illegal mods is, well, pretty fkn stupid.

[@ufx808]

Thanks for keeping us up to date with your build. That's one hard core Surf. Greetings from a locked down UK.

[@matthewrossendell6762]

Wow mate, that is one cool surf awesome work, definitely one of the most modified 4x4s in Aus, can't wait to see it on the tracks!

[@adrianryan1975]

Thanks for the looks, mate. That's a mad surf.

[@peagee4625]

Awesome build, well done! 👍

[@hpa101]

Looking good mate - Taz.

[@DanielB_]

love the surf mate, i can see you have put a lot of effort into this build, i would love to own this fourby.

[@aidandixon9195]

Awesome stuff as always dude, I've had so much inspiration from you , I've start my own project on an 80 series. 1994 DX 1HZ. Keep the videos coming !

[@masonfraser3885]

Fucken insane how much work has been done to this. Not what I'd go for personally but definitely things that give me ideas and can 100% appreciate what's been done

[@thebushchechen]

Wow dude .. nice work. I’m envious 😅

[@screamitinstead]

Dude this has come so far, been watching the channel for so long and this is my number one favourite build

[@boostedbuiltgarage]

Haha yes indeed. Like all my cars, they just keep evolving🙈

[@ZaneWooten]

Jeez!! Best build i've seen yet. I just recarpeted my 2000. haha....i'm working on all this other stuff.

[@3.0colorado21]

Nice rig! I’m gonna use some of these ideas

[@jimmyjames9962]

Absolutely amazing build, my dad had a 1995 surf when I was a kid and it was always my childhood dream to have a 4runner and I got a 1990 4runner last year and in the process of deciding to put 33inch tires on it but not too sure to go with a 2 inch suspension lift and 2 inch body lift or to go a 4 inch lift if you could give your feedback that would be greatly appreciated

[@ssabet9]

Man what an underrated channel!! Ive just done a nice marathon on the Surf (more vids pending) and mate you are an artist with all the stuff yo make....rig is looking mint....and love what you've done to the 2LTE...amazing! It'd be cool if some day you figure out how to go around that squished pipe you had to fab in order to clear the valve cover, like the angled tubes you were talking about...

[@boostedbuiltgarage]

Thanks mate, appreciate the support! Yeah I definitely will be changing the hot side pipe off the turbo once I get rid of this shitty ct20 haha

[@environmenteller4442]

That custom air intake so sick ima make one

[@Roadie237]

Far out this is flash now, I wish my surf looked like this when its done 👍👍👍👍👍

[@b_gonzz]

Mate this looks bloody unreal! I’d love a surf like this this

[@boostedbuiltgarage]

Thanks bud👍

[@VisorView]

Followed this exceptional build since day 1. Is there any possibility that you could do a video that covers the standard vs modded performance of the motor. It would be great to know the final increase in power over the rev range, acceleration, top speed, fuel economy, bhp etc, and how much this differs from a stock set up. A side by side comparison with a 3.0L and a standard 2.4L would reveal the difference that you have made. It would make an excellent video, and silence the critics.

[@travisyoder473]

Love this thing man! What size tubing did you use for the exo cage on the surf? Wanting to do something similar here in the states. Thanks!

[@thebushchechen]

A+ runnnner Life!

[@eddieinsley5533]

keen on some more details bro its exactly what I want to do to my surf the same year

[@murrayblair2159]

Well, I will go through all the Surf build videos for ideas. Bought o e without an engine and gearbox, its getting a 1UZFE and 5spd manual. Climate controls changed to the electronic ones. But awesome mods to see and incorporate into mine!

[@SimonElenor]

I had an 1987 Toyota pickup with the 1UZ. It was awesome. I went stupid and traded for a 1987 4runner. Then found out the engine and trans was done on that as well. So now doing a 3RZ swap on that.

[@MrParker300]

Wow, just wow. I love this truck build so much

[@boostedbuiltgarage]

Thanks mate👍

[@surfwave11]

This is awesome, I’m based out of the US currently building my 91 4runner to be my overland vehicle for weekend overland/camping. Do you have blue prints? I want to do this so bad. Have no clue where to find this stuff, tried searching external roll cage and nothing coming up maybe I’m searching in the wrong area. Awesome video love your design.

[@kylemullett5207]

Essentially!!!!

[@husyr4420]

What radiator are you running? I want to keep mine cool, yours looks dope!

[@stevelloyd9856]

Hi mate pulling your caster forward how did you do that and do u have aftermarket bits to do this wanting to do the same with my truck as i have same wheel tyre setup

[@vincentamerena7302]

looks awsome just about ready for a sas... haha

[@boostedbuiltgarage]

😂🤦‍♂️ not ready to undertake another major fab job quite yet... It's spent most of its life under knife already😂

[@MrMalePrincess]

Hi, do you still have the 3D print files for the switch setup in the center console. If so, do you mind sharing them with me? Great build, gotten some good ideas off you.

[@mike.eric.]

Dream for my surf to look like this. But Baby steps so my light bar will do for now😂😂

[@soothingmeow22]

I wish the Turbo Diesel was sold in the states, the 3.4 is a solid but its a bit thirsty

[@captainmorgan666]

Nice surf, those Kut snake guards look pretty cool, old ones look better but these would look almost as good if you colour matched them. The swing out looks sick, when you mount them the other way they stick out so much and would have to be mounted high up anyway to stay out of the way, and even if you have them empty they still stick out (which sucks if you want to daily drive it. I know, blah blah blah, you should just remove it when you don't need it.... I'm way too lazy for that). I got an Aussie delivered 4runner, with a 3.8 ecotec ⛐ . I gotta keep an eye on that hand brake kit, factory handbrake is sketch as. You gonna run it to the factory handle? I've love to see you do a floor handle conversion.

[@boostedbuiltgarage]

Yeah I ummd and ahhd about the swing away setup for a while. I deemed it to be more important to have in closer to the vehicle for clearance when on an incline. Also moved the tyre up higher now that It's a 33 to maintain exit angle clearance. Yeah the handbrake kit I've designed is bloody amazing. My original plan was to do a floor mount 80 series lever. I even bought one and everything but there's just no space. I've got the factory pull brake working better than ever though so I'm not worried. It's almost effortless holding ability now

[@jeremygyles3492]

What size is the push lock line on your air compressor I'm worried about choking mine. Are you thinking of tying the exo in in more places like front bumper c piller and over the rear wheel? Loving the content especially when nz has been shut down.

[@boostedbuiltgarage]

It's 3/8 diameter line. I am going to be doing brush bars. I actually had some bent up but changed my mind on the look of them and didn't have time to waste redoing them before I raptor coated everything. Over the rear wheel won't work cause the rear door will hit it. But tbh it's only the essentials to keep it simple and light

[@adrianryan1975]

Need this rig in this zombie apocalypse

[@jimmyshenaethekids5054]

How much for a rear drum brake to disc brake, hand brake conversion sent to new Zealand

[@tylerazzopardi6803]

Where did you get the kut snake flares?

[@user-uy5ym3xl4t]

Keren

[@brendanrandle]

might want to replace those travel locks with something else, the universal keys is only a couple of $ from china

[@trineshadari17]

Hi Man, do you know if I can put in a 2.8lt diesel engine in a LN 130 (2.4 turbo diesel) 1990 Can the existing turbo from 2.4 be okay with the new 2.8l? Thank you @ boosted & built garage

[@boostedbuiltgarage]

Yeah as far as I know they're basically the same engine and should bolt straight in. Turbo kit will be fine. The factory turbo is quite shitty and restrictive anyway so a better flowing turbo would be better but the ct20 will still work fine. Only issue with the 2.8 engine is the mechanical pump isn't boost compensated so they're not the most efficient fueling wise with a turbo on them. But obviously a turbo is much better than N/A

[@trineshadari17]

@@boostedbuiltgarage you are a legend!

[@jonmatthews5475]

Hey man just wondering, you've seem like you've done alot with surfs, mine has a clunk only under load its not the diff and im pritty sure its not the gb or transfer, im 100% its the tailshaft

[@boostedbuiltgarage]

I've done alot with cars in general, not so much surf's, but it sounds like it may be one of the uni joints on the tailshaft... Grab the shaft in one hand and the other side of the uni in the other and rock them in opposite directions without turning the shaft, if you can feel the shaft move/slop slightly (independent of the other side of the uni) that's indicating wear/play and if theres enough it can be quite loud

[@oyehuevon1]

Where did you get the headlights and turn signal lights?

[@boostedbuiltgarage]

Head lights are from Ultraflex 4x4 and indicators in bar are eBay but with my custom 3d printed adapter housings

[@Braydenclark]

15.08 you diff is cracked

[@boostedbuiltgarage]

It's a Tig weld on my exhaust... Lol

[@boostedbuiltgarage]

Edit I just realised where you were talking. I don't think it's a crack, think it's just the shadow where the factory weld is. You've got me worried now though🤯

[@Brv1nBl0w]

What fender flares is this?

[@boostedbuiltgarage]

Kut Snake

[@jasonburleigh8731]

Is that a crack in your axle?

[@boostedbuiltgarage]

Please refer to my comment pinned to the top in the comment section...

[@liampoor9699]

What about the 60 series brake kit? how's that going? PS: You thought i'd only ask on Fb didn't you :P PPS: I know the answer already haha

[@boostedbuiltgarage]

Hahahaha c'mon Liam. I've spent all my time over the last 6 months working on these bastards cut me some slack 😉😂😂

[@liampoor9699]

@@boostedbuiltgarage maybe just this one time hahaha

[@liampoor9699]

@@boostedbuiltgarage i'm flogging the exocage idea for my 60 though

[@wikkidme755]

15:10 what’s that crack. 😱😱

[@captainmorgan666]

I think it was just a weld on the diff housing or something, sorta looked like a crack but only when it video transition effect was happening.

[@boostedbuiltgarage]

I don't know what you're looking at? The Tig weld on my exhaust?

[@wikkidme755]

Boosted & Built Garage looks like a crack in the axle housing....

[@captainmorgan666]

@@wikkidme755 I don't think anything is cracked, they all look like that there.

[@adrianryan1975]

I see what your talking about but I don't think it's a crack

[@andrewbarnett84]

Looking good, with all that extra weight, you will need a bigger engine LOL

[@Francis-yv6hc]

Throw those TSA padlocks in the bin, you can buy the keys for them on EBAY, good for nah'n

[@boostedbuiltgarage]

Lol I'm sure you could also cut them with side cutters. It's more a deterrent for little shits who want to be a pain🙈

[@sitinjaulauikmekaniktruk8528]

Fantastic video..everything is complit..please stop by my house..

[@derykzegveld7172]

good to see another mall crawler, there's way to much weight there for any serious 4wding, the reason you never see stacked jerry can holders one above the other is because it keeps the weight lower. Plus I hope you've done a diff drop in it, otherwise you're going to be snapping cvs every time you use 4wd

[@brocksinclair66]

to much wieght my ass. have you seen the patrols and cruiser getting around? there 4 ton plus, surf weigh fuck all in comparison

[@boostedbuiltgarage]

Lol how's this know-it-all hero🤦‍♂️

[@derykzegveld7172]

@@brocksinclair66 yeah, they also have an engine with twice the power, which I'm sure you know. But if you've ever tried 4wding in an underpowered heavy car you'd know how useless they are at anything more than a gravel road

[@brocksinclair66]

@@derykzegveld7172 yeah because a fucken td42 is "powerful" a 3.0 td surf has more power. That thing would be luck to be 3 ton. Lol this guys on crack

[@brocksinclair66]

@@derykzegveld7172 and thats counter intuitive of has double the weight it needs more power any way

[@PangNSmitten]

Buy a hilux, do some engine mods. Get it rippin. Stack on a sh!t load of weight. Back to square one.... I don't get it... I like the mod's, but, it's the right mods on the wrong vehicle. It's like loading up a donkey with a sh!t tonne of bricks. The f(_)cker ain't gonna move. Sorry bout it!

[@boostedbuiltgarage]

Lol so you've driven it then?...No? Exactly... It drives no different to how it did without the cage.

[@PangNSmitten]

@@boostedbuiltgarage I'm not diss'n the mods, your fabrication is f/n spit on, I give you full credit to ya, but, sometimes you gotta draw the line somewhere. That engine won't last. I've had a luxy dual cab and have driven a surf b4. Weigh everything and I mean everything, in and out. You're over GVM, your fuel consumption will be through the roof. A sh!t tonne of drag = more fuel consumption. The list goes on. I'm seeing a canary flying in the distance.