Follow the link and use code “DEVINW10” at checkout: www.valken.com/?RR_WCID=27D5B...
Пікірлер: 108
@daphar13 жыл бұрын
I’ve been planning on getting one but have been holding off to see as many opinions as I could. I might just get one now.
@jinkxjinkx71233 жыл бұрын
Love the vid bro keep up the good work
@atus3 жыл бұрын
Really nice gun, but my microswitch stopped clicking too. Replaced it with a Krytac mosfet and trigger contacts and all works perfectly. Still a very nice gun imo, but you just need to be ready to replace the included microswitch since it will most likely fail.
@DevinGhillieAirsoft3 жыл бұрын
Yeah for a beginner tho I would not recommend. And it’s kinda ridiculous paying over $200 dollars for a gun just to break second time out. Airsoft Players need to start demanding higher quality for what we pay for
@TheHumanParaquat3 жыл бұрын
Exact same thing happened to me on the 97b...just changed the switch for now...but the stock mosfet has been confirmed as very bad...
@atus3 жыл бұрын
@@TheHumanParaquat Sad that the microswitch is so bad. The gun itself is amazing for the price.
@albertkropp3 жыл бұрын
Is this what you used? www.evike.com/products/55969/
@FAWX2 жыл бұрын
@@DevinGhillieAirsoft well yeah, they're the same dipshits who pay 350 for a gun that shoots 10 rps at 380 fps with a poo ass motor, gearbox and no quick change spring guide. Id much rather spend 200 on this and have to replace the mosfet with a gate titan and be done with it, than to get a gun thats performs like trash for twice the money.
@robertbullard85702 жыл бұрын
Nice video, after watch this, I believe my Dytac is from this same factory. btw, that motor is really strong
@llgarboll35702 жыл бұрын
Ay bro what Tracer unit is that? Looks sick on their I might want to get one myself
@cfmele123 Жыл бұрын
How did you remove the stock suppressor set screw/ roll pin? What tools/methods did you use? Thanks.
@jthampy59432 жыл бұрын
How did you take off the flash hider because I’ve been struggling
@walid45722 жыл бұрын
how did you remove the flash hider from the cm097 and put a silencer
@jacobr.hamilton22532 жыл бұрын
Im looking for a good dmr for my first one, is this one a good pick?
@tylera8297 Жыл бұрын
How did you take the flash hider off, and what tool, I’ve been trying to figure out how to take it off
@insertname92142 жыл бұрын
how did you get the orange tip of on mine it is really tuff
@charlietbone79582 жыл бұрын
Awesome video! The mosfet on mine stopped clicking so I'm in the process of upgrading it now. How good is the gearbox shell itself on the platinum, how much power in joules do you think it can reliably handle?
@DevinGhillieAirsoft2 жыл бұрын
Im pretty sure I’ve seen m140 to m150 springs being used
@brendanrogerio35362 жыл бұрын
Thank you so much, I've been looking for this kind of video. Overall, would you recommend buying this as my first gun? Also, what battery would you recommend using?
@DevinGhillieAirsoft2 жыл бұрын
Not necessarily as your first gun because it can break quickly. Unless your field has a good tech that can switch out your mosfet.
@JackTopinka7 ай бұрын
What new mosfet would you recommend?
@juliopmiller54442 жыл бұрын
Nice video man! I have a question. Would you say this rifle is compatible with other m4 magazines like eliteforce, valken or g and g and kwa?
@DevinGhillieAirsoft2 жыл бұрын
Yes all m4 mags
@TascoDayZ3 жыл бұрын
That sound like the song I use for intros
@sweshy5877 Жыл бұрын
what tracer unit are you using
@whatthe7762 жыл бұрын
Awesome vid What optic r u using on this gun? Edit: What riser r u using too
@DevinGhillieAirsoft2 жыл бұрын
Replica T1 from evike. Around $40
@neshess3 жыл бұрын
I’m going to make a rap sample out of Devin sounds
@Mark_B5442 жыл бұрын
Why replace mosfet, it’s under warrant for a year so let THEM replace it
@dsolo23903 жыл бұрын
Please tell me which tracer unit you are using? I just noticed that it fits perfectly into the original forend and the fact that when the original silencer is removed, there is still 10 cm of the barrel that does not interfere with its operation.
@DevinGhillieAirsoft3 жыл бұрын
I put an ace tech lighter s inside a hollow suppressor with foam and I think i used a 2 or 3 inch barrel extension
@dsolo23903 жыл бұрын
@@DevinGhillieAirsoftthank you!
@hayfry93526 ай бұрын
boutta but a Perun v2 in mine for my first actually good rifle
@garretrasmussen52533 жыл бұрын
How good would you say the external quality of this gun is ??? Ive seen another video of this aeg and the barrel was built of center
@larrythecucumber19193 жыл бұрын
Very good quality
@logancristoforo89223 жыл бұрын
How did you get the flash hider off? I’ve been hearing it up and it won’t budge, I took the grub screw out
@shirleyproductions3 жыл бұрын
it's 14mm negative, so it's left to tight, right to loose. just make sure you are twisting it the right way, and maybe try using a vise (if you have one). be sure to buy a replacement flash hider before you take it off. that way if it breaks when you take it off, you don't look like a doofus on the field with no flash hider.
@josephagarwal90372 жыл бұрын
If I wanted to go for the nato type guns (M4) would you recommend Cyma ?
@DevinGhillieAirsoft2 жыл бұрын
Check out, G&G and Classic army,
@skidhvh2 жыл бұрын
Is Perun V2 Hybrid or Gate Aster a good replacement?
@DevinGhillieAirsoft2 жыл бұрын
Yes
@mikeymaltz60123 жыл бұрын
do you think putting a GATE titan in this would make it worth the purchase? i just bought this and am now seeing that everyones microswitch breaks :(
@DevinGhillieAirsoft3 жыл бұрын
Yeah there’s a video on how to do it
@atus3 жыл бұрын
Yep. Replaced my microswitch with a Krytac mosfet and Krytac trigger contacts. Otherwise very nice gun.
@Prisutni Жыл бұрын
gate titan is $170 and gun is $250, hahaha
@juanmkinsley44712 жыл бұрын
Would this be good for outdoors or is it more of a cqb gun
@DevinGhillieAirsoft2 жыл бұрын
Both, just maybe change the hop up bucking
@aserrano11643 жыл бұрын
what's the whole setup including sights and tracer, beginner and this build looks amazing!
@DevinGhillieAirsoft3 жыл бұрын
xOF Prospect is look at the G&G combat machine 2.0 or ARP9. This just broke on me. But the red dot is a cheap T1 replica. Ace tech makes really good tracer units
@aserrano11643 жыл бұрын
@@DevinGhillieAirsoft Thanks for the help, might be a stupid question but on top of the barrel that little device that's flashing, is it part of the tracer unit ?
@smiggieballs89363 жыл бұрын
xOF Prospect that’s a Gun Camera that mounts to Your gun
@smiggieballs89363 жыл бұрын
Same setup as Storm
@SassySardine2 жыл бұрын
How did you remove the supressor and add a tracer unit?
@SassySardine2 жыл бұрын
Im trying to remove it but I cant remove the handguard to get to the grub screw holding the suppressor in.
@thomasfernandez11392 жыл бұрын
How reliable is this? Can this be a good plinker? Can it take nimh batteries?
@DevinGhillieAirsoft2 жыл бұрын
Go with the combat machine 2.0 for plinking and Nimh batteries. Very reliable
@hotpocket9073 жыл бұрын
what battery did you use for this? Im planning on using 11.1 lipos
@DevinGhillieAirsoft3 жыл бұрын
11.1 but my micro switch broke
@makingmumscry30123 жыл бұрын
Apparently these microswitches can't handle the 11.1. best is 7.4 lipo with the micro switch trigger
@TheHumanParaquat3 жыл бұрын
@@makingmumscry3012 mine still broke with a 7.4
@robertleckie96973 жыл бұрын
Did the microswitch break because of 11.1v Lipo? Will it be ok if I use 9.6v nimh? Will Nimh break the microswitch?
@DevinGhillieAirsoft3 жыл бұрын
It’s a physical break from pulling the trigger. Nothing to do with the battery. The trigger smashing against the microswitch breaks it.
@robertleckie96973 жыл бұрын
@@DevinGhillieAirsoft if I plan to get this gun should I be concerned with this?
@atus3 жыл бұрын
I used a 7.4v lipo the whole time and my microswitch stopped clicking. Replaced it with a Krytac mosfet and trigger contacts and everything works perfectly now. If you get the gun I'd also buy a new mosfet or trigger contacts for it. The stock mosfet lasted only 5 or 6 games I think.
@TheHumanParaquat3 жыл бұрын
@@atus lol same, I got 6 games out of it
@StorMRagE4EVA3 жыл бұрын
So where in the video does it show the gun broke, it sounded noisy but the gun looks like it worked, and it's likely the hopup had issues which that's 1 part if the gearbox didn't have any structural failures than you're Golden
@DevinGhillieAirsoft3 жыл бұрын
Nope broke the next weekend, microswitch snapped off
@uncleruckus74923 жыл бұрын
Just gotta ask what the fuck is a micro switch
@shirleyproductions3 жыл бұрын
you gotta get the cyma platinum sr47. exactly the same, but it takes ak mags. same gearbox, motor, everything. it just means you get beefier mags with more ammo.
@DevinGhillieAirsoft3 жыл бұрын
PTS EPM1s hold 250 BBs
@shirleyproductions3 жыл бұрын
@@DevinGhillieAirsoft yeah, but those are what? $30 bucks apiece? a 200 rd ak mag costs $10. I also just like the unique aesthetic of an m4 with ak mags. that might just be me, though.
@FOVAirsoft3 жыл бұрын
This gun is stock? Impressive.
@DevinGhillieAirsoft3 жыл бұрын
FOVAirsoft yes! Very impressed with it
@erayhackz85163 жыл бұрын
What gun should I get thats a little cheaper
@BargainingHCF3 жыл бұрын
king arms 9mm isn't bad
@supremeprime6602 жыл бұрын
The gun broke the second time out? I just orderd one of these and idek what a mosfet is. Is mine gonna break?
@DevinGhillieAirsoft2 жыл бұрын
Very likely
@supremeprime6602 жыл бұрын
@@DevinGhillieAirsoft really dont wanna send it back for 300 ud think itd last ahwile..
@DevinGhillieAirsoft2 жыл бұрын
@@supremeprime660 it might, I’ve heard rumors they updated it. Just don’t pull the trigger hard, or even put something to sorta stop you from pressing it down all the way, just until it fires the gun.
@stilesfpv1382 Жыл бұрын
So it doesn’t really seem like you work with your teammates in these. Is it kind of a free for all and just trying to get kills?
@DevinGhillieAirsoft Жыл бұрын
I don’t need a team
@stilesfpv1382 Жыл бұрын
@@DevinGhillieAirsoft wasn’t saying it was a bad thing. Just getting into trying to figure this shit out
@get_spanked240 Жыл бұрын
Is this the 8.5 version?
@DevinGhillieAirsoft Жыл бұрын
Yes
@smiggieballs89363 жыл бұрын
Field is changed cmon in when you can
@Molly-bz2md3 жыл бұрын
This is hv air soft right?
@smiggieballs89363 жыл бұрын
@@Molly-bz2md it is
@Sniperskillz2 жыл бұрын
What mosfet and trigger contacts did you use?
@DevinGhillieAirsoft2 жыл бұрын
You can use a Titan with very little modifications there’s a video on KZbin
@thegunshow76353 жыл бұрын
Broken?
@DevinGhillieAirsoft3 жыл бұрын
Broke the next weekend
@thegunshow76353 жыл бұрын
Like what broke?
@DevinGhillieAirsoft3 жыл бұрын
The microswitch
@atus3 жыл бұрын
Yep, my microswitch failed too. It stopped clicking.
@TheHumanParaquat3 жыл бұрын
@@atus same...
@mikemegadeth41103 жыл бұрын
Ofcourse it broke. You stuck a big battery and you flip that trigger like a kid flipping the light switch on and off. Your gonna short something out. Same concept
@DevinGhillieAirsoft3 жыл бұрын
It wasn’t a short it was a physical break. The plastic on the microswitch is cheap.
@mikemegadeth41103 жыл бұрын
@@DevinGhillieAirsoft I know I was comparing lol. Short was to brake as the trigger was to light switch