The best BUDGET 4K wireless HDMI transmitter?

[@draxxicek]

My experience with other wireless systems is that it usually works fine in the studio, but once you take it to a location and even try running more than one wireless set at the samw time, things tend to go down the drain pretty quickly. I would really like to see at least two RGBlink units plugged into a Yolobox, somewhere on a street - it would be great to get at least 20-30 meter range (imagine combining it with transmitters plugged into a full size HDMI ports like GH5,6,G9 or A7Siii or A7iv) - would be great for livestreaming from various locations without the need of bulky transmitters/receivers with even bigger NP-F bricks.

[@frankluo230]

On a side note, what is the best live streaming OBS app on iPhone allowing editing a scene containing video feeds from all three cameras of iPhone at the same time? Like a vlogger showing both himself and what he sees in front of the phone in a customised picture in picture style?

[@rgblinkben6546]

ASK supports to check the right bands for the wireless connection when it powers on after the other wireless system powered on. And then it makes sure the solid wireless connection and works stable.

[@batisurel]

here is some Q's; 1) what about screen share distance. This product to screen max distance? 2)What is the maximum temperature level that the product can withstand? 3)What is the maximum number of hours the product can work in a day?

[@rgblinkben6546]

The recommend distance is 40 meters. In a fully open area, can reach up to 70 meters. The temperature suggests to be not higher than 40 ℃.

[@rickallenphoto]

As always, a very complete and comprehensive review. Thanks, Aaron.

[@frankulfberht]

Would be better if the review included a test on its actual real range.

[@cmdrefstathiusplacidus9003]

actually this is a cool way to monitor or even capture blink camera systems that only have a phone app available for viewing natively

[@sibertiger17]

For everyone's info, on the website it states "up to 40m from laptop to transmitter"

[@tucsonconnie6864]

What does that mean?

[@mansurbm_]

@@tucsonconnie6864 it will explode if used further than 40m.

[@rbrath8122]

Nice review. When the 2-receiver version returns at that price point, I may give it a go.

[@lsmith77]

hard to find here in Europe. also found it on a Dutch website for 275 € and on a German for 417 € .. quite a margin. at 275 € that seems like a fair price. in my case I am looking to transfer video from an iPhone and a GoPro. so with one set I can send both signals (1x RX for the iPhone via AirPlay + 1x RX+TX for the GoPro).

[@Sinista1Productions]

Nice review this might work as a wireless option for my DJ setup for the Karaoke vs running a long HDMI to the monitor.

[@CRM49]

How did it work out for u? Thinking about getting one for karaoke as well

[@photojoseph]

Very comprehensive - thanks! Love the stress tests.

[@spxl]

If you like side-by-side comparisons to show latency, running (additional) timing tracks down the left and right of the frame will let you "see" the latency at the seam between the two frames without having to capture a still (and make it more obvious when you do take a still).

[@JoshKaufmanstuff]

Can you explain how this latency comparison works? I’m not quite understanding from your comment?

[@petermcginty3636]

Aaron, that you, this was really the best idea that I heard all day. It may even solve a minor tech problem that I have with my Livestream setup. If it works, I will drop you a line and tell you about it. Many thanks.

[@vibetribe52]

well, we're waiting

[@mansurbm_]

Still waiting

[@QuicksilverSG]

As with most of these wireless video Tx/Rx systems, the RGBlink Ask Nano 4K only supports 60 fps, NOT 59.94 fps. This plus its HDCP encryption rules it out for professional video production in the USA, but may not be an issue for consumer applications.

[@CihanekPhotography]

Q. Did you test distance? I’d be curious to know how far that can transmit before you start getting too many dropped frames.

[@rgblink]

Can transmit 30 meters without obstruction

[@itisriley]

A possible solution to the video delay that you mentioned when having to worry about syncing audio, if the device transmits audio, and the situation allows it you could probably easily fix the issue by feeding audio into the camera source.

[@aaronpk]

Yes definitely, if you only have one camera then the easiest solution is to run the audio into the camera. But if you're matching multiple cameras then you'll have sync issues.

[@tiemji]

Thanks for the complete review. i had a similar system which works great sometimes, and sometimes not. I really hope this system is more reliable

[@StreamTeknology]

Nice review and test!

[@davidborras8602]

Just tell me the costs

[@dreamshotmedia]

@@davidborras8602 on Amazon this comes up as like $200 I'd much rather deal with cables then spend $200 per monitor/device essentially

[@fatabelly]

@@davidborras8602 $200 give or take, not exactly budget!

[@bouldersoundguy]

I'm curious what the range is and how it performs when there's a room full of people with phones between the transmitter and the receiver. At my day job we use a wireless remote so a presenter can advance slides loaded on the venue's computer. If the receiver dongle is connected directly to the computer, it works fine until there is a crowd of people with phones. Our solution is to use a USB over CAT5 extender to put the receiver dongle on stage near the presenter. I wonder if this wireless HDMI device would have a similar challenge.

[@rgblink]

The impact of mobile phones on our devices is minimal. ASK transmission has independent frequency bands, and we also used ASK at ISE exhibitions to maintain stable operation even in such a crowded environment

[@TimoSund]

Makes me wonder. Price and availibility within EU. Have conference coming up where this’d save some time and cabling + keeping stage neat

[@jose.a.martin]

Such great testing. Thanks a lot

[@E.R.U.42]

Is this good for focus pulling, or the latency is too long? What do you think? Thank you!

[@al201103]

I'd also like to know your thoughts on this.

[@aaronpk]

Probably not a good option for focus pulling between the latency and compression

[@al201103]

@@aaronpk Thanks man, appreciate the reply. Very thorough video, nicely done :)

[@carpetbomberz]

1.) Don't use it for IMAG 2.)Do use it for screensharing 👍

[@cjhonsons]

whats an IMAG?

[@buildingsheriff]

Image magnification

[@TheSeanBampton]

@@cjhonsons If you have someone on stage at a large event, they are often projected onto a larger video screen/board so everyone in the room can see them. That's IMAG.

[@user-sk4gj3ji3o]

Latency and stability are the 2 major concerns hence if have usb 3.2 support that will solve the puzzle. Although window have certain feature but one can not compare it with 4k 8k tv monitor.

[@joshfehr9768]

It would be really useful if you could wirelessly transmit HDMI signal from a video game console to a VR headset

[@nateainsworth5461]

Would this also transmit Audio? if so is the audio in-sync with the video? Thanks for such an informative video.

[@rgblink]

Yes, HDMI output comes with embedded audio

[@Hassanakora]

Make RGBLink mini edge switcher video if possible

[@IrisXie-x9s]

mini edge swithcer video is available in AMZN now

[@-COBRA]

Thanks for great review. Can you test performance of signal through concrete/ brick wall?

[@cinek7369]

Thank you for this video. Pozdrawiam z Polski.

[@TheSeanBampton]

Great video, as always, Aaron. I'm wondering if this would be a good product for producing Teams Live Events? I currently use a 35-foot HDMI cable from a single camera to an ATEM mini Extreme, then into OBS and out to Teams. Would the audio latency be noticeable in this case? Could it be adjusted using the ATEM control software? Open to suggestions.

[@gojohnnygo2021]

What is the range, and will it stream a camera?

[@aaronpk]

I don't have a good way to test the range right now. I did stream a camera in 4K in the video

[@gojohnnygo2021]

@@aaronpk I was thinking like the bike video you did, however cordless w yolo.

[@jbvcster]

I need the same answer

[@wening-fotografie7826]

have the same question, even if you do not have an exact numer, waht is your feeling/experience, is it more 5, 10 ,50 or 100m? will it work from one room into another? or is distance very limited?

[@uwasidakyo1632]

Good review. But hey does this mean we could use it in streaming? How about its robust

[@pdppdp3854]

excellent review!

[@cmdrefstathiusplacidus9003]

this sounds like it's not geared so much for using with OBS or other streaming platform but as a multicam viewing screen

[@JarppaGuru]

i say it now... later come hdmi wireless monitor where you can see wireless monitors and you select what you want crach if there something to crack. so you see neighbour wireless hdmi. well good old LAN and HDMI cable is good now?

[@kmnaniak]

that's the problem with budget option; I can stay on my Wifi while in the same time connect wireless to my Screenbeam dongle and here you are forced to disconnect with your network just to be able to connect with a dongle

[@aaronpk]

How much of the video did you watch? 😉

[@STRThermal]

Great channel, great video. I'm looking to use this with my drone controller to allow broadcasting to a remote monitor. The current controller can wireless screencast, but has an issue(limited processing power) and cannot screenrecord(which I use for my channel content) and screencast(for sharing my feed with the customer) at the same time. So, I'm looking at HDMI wireless methods to work around the issue.

[@shaggythisisntweed8970]

how well will this work streaming movies from my pc to my tv?

[@joachimb4321]

After watching the video, I must say I love the level of detail you provide in testing the transmitter and receiver. However I want to hear some opinions anyway, do you believe this would work to cast the HDMI signal (1080p HD 60hz) from a computer to a celling mounted projector? We are looking to set up a small home cinema and are looking at our options for getting the HDMI from the PC (in the same room) to the projector which will be mounted in the center of the room (probably 10 meters between PC and projector as a rough estimate). Based on your tests, would you think it would handle my needs, if all we plan to do is watch movies and play some casual games?

[@aaronpk]

Thanks! It should work fine for movies as long as your projector feeds the speakers. There's a slight delay, so if your speakers are being fed from the video source instead of the projector, the picture will be slightly out of sync. The delay is also probably too much for gameplay.

[@joachimb4321]

@@aaronpk Thank you for the info :) I was planning to connect a set of speakers using the built in Aux port on the projector I have, so that shouldn't be an issue. We mainly plan to use it for movies, so even though the delay might be too much for gameplay, I may give them a try none the less, as the whole "gaming" part can still be done in our respective offices, the media PC isn't really built for gaming anyway. again thank you for getting back to me with answering my question :)

[@PhotoGuyOmaha]

Thank you for your awesome work and the information you provide. Sadly, on this episode, I wanted to see what this HDMI transmitter would do across a room. Most of your examples where short distances (3-5 ft) and going wireless doesn't make sense to me at such short distances. Is there any chance that you can review this item if the scenario was a conference with 200 people sitting in a large room with (clogging the radio waves) and a camera way over there. Based on your comments in this video, I might use it on a Confidence Monitor rather than video headed out my stream.

[@BoraHorzaGobuchul]

It does make sense since if you want e.g. to use a TV as a monitor while still using the notebook you have otherwise to connect it using a cable which is (a) a tripping hazard (b) looks ugly (c) is thick so makes moving the notebook uncomfortable

[@jadesprite]

I'm very interested in these but anecdotally a high quality signal will completely consume the wifi airspace; a coworker talked about chaos in the office when a manager installed one of these for a conference and every other wifi in the surrounding offices started dying. That's actually how I found this video, I didn't even know these existed before he dumped that story on me, lol.

[@Cuban1109d]

What's the longest distance range between hdmi transmitter and receiver.

[@rgblink]

1TX and 1RX can transmit 30 meters stablely,1TX and 2 RX can transmit 15 meters stablely,1TX and 4 RX can transmit 10 meters stablely.

[@paxwebb]

What about range??

[@DavidCastilloOnGoogle]

Hello! I plan to use this for my desktop and I'm not gonna move around much - only for me to remove the cables. I mostly game in my desktop. Can this display >60Hz (around 120 onwards Hz) for my purposes?

[@mauveferret7076]

Correct me if I'm wrong, but I didn't see any mention of what distance between the two devices starts showing high latency and signal deterioration.

[@aaronpk]

yeah sorry, I don't have a good way to do range tests right now

[@FrancoAversa]

Hi, I wanted to ask you for advice, I purchased the DJI Osmo Pocket 3 which has the webcam function at 1080p 30fps, in OBS I can see it without problems, I have vMix HD and if I try to insert an input from the Pocket 3 I only hear the audio and I can't view the video. What could it depend on? I have the little program Xplit Vcam and if I go to get the Pocket 3 from there, even if it is transformed into 1280 x 720 then it shows in vMix. Is it a question of resolution?

[@The_Ascension]

Is It HDCP compliant?

[@rgblink_support]

yes, it's support HDCP2.2 and backward compatibility

[@talkeasy]

Hi Aaron. Did you test the transmit range?

[@rgblink]

1TX and 1RX can transmit 30 meters stablely,1TX and 2 RX can transmit 15 meters stablely,1TX and 4 RX can transmit 10 metersstablely.

[@Fome]

Please tell us how well it works over longer distances

[@rgblink]

1TX and 1RX can transmit 30 meters stablely,1TX and 2 RX can transmit 15 meters stablely,1TX and 4 RX can transmit 10 meters stablely.

[@DJ_joker]

A link where to buy would've been nice!

[@aaronpk]

It's the first link in the description

[@gamermage95]

Quick question, did you test the range of the receiver. Looking for use in a church auditorium. Wonder if the latency is reliable over a long distance. Thank you

[@rgblink]

1TX and 1RX can transmit 30 meters stablely,1TX and 2 RX can transmit 15 meters stablely,1TX and 4 RX can transmit 10 meters stablely.

[@mauwne]

I am looking for an affortable setup where I have two or more transmitters and a single reciever so that I can live stream from two or more cameras. Is any suggestions?

[@sibertiger17]

This is what I need to know also...three cameras at a hockey rink for streaming kids games...

[@WickedWaiata]

that delay really is a deal breaker!

[@franzw70]

Great review , backed up solid knowledge, thx kindly for your expertise

[@2660MHz]

4k 60 fps or 30 fps?

[@jamiecastillo1701]

Hello there quick question can I use these transmitter in 3 Tv's for our church you think..? i would like to know if there is a package with tree receivers... Thank you

[@bagtube]

if I were to share a video from my computer to my 2 televisions does the sound also come out my televisions? I want to share a streaming football game and would like the actual sound to also come out of each TV. Is this supported? Thanks for your help.

[@tonyhernandez3433]

Hi. Can this be used from my iPhone to my new Toyota 4Runner head unit ? If not. Do you have that solution for me ?

[@ExpatGlobetrotter]

I’m not techy at all so this may be a dumb question… can I use this to connect my Amazon Firestick to my laptop?

[@aaronpk]

Not really, what are you trying to do?

[@TheAmos1968]

That smallrig product you are using. I was thinking about using it to hold this on the back of my tv. I went to their website, but could not figure out what you are using. Thanks

[@aaronpk]

That's an SSD holder! It's weirdly a pretty good size for this! geni.us/dGxAgnA

[@TheAmos1968]

@@aaronpk Thanks for the reply!

[@Work2012WS]

curious how this is budget friendly? i have found ones that work just as well or better for 1/4 of the price.

[@aaronpk]

My channel is mostly about livestreaming gear, and a basic wireless HDMI transmitter used in the industry starts at around $400 and can easily go up to several thousand dollars if you want longer range or reduced latency. So this is surprisingly affordable for what it can do in that context.

[@Docinkhup]

Does it extend or just mirror to both the receiver monitors? My dell laptop doesn't have other video output port except hdmi.

[@ishi...]

7:30 I guess playing games might suck with wireless HDMI? 100ms seems quite a lot

[@aaronpk]

yeah, I would not use this for things that require no latency

[@darrenganz1]

i wanted to use this for sharing video from my roku and xbox to my projector. is this a good choice?

[@AnimeSideSwiper]

Immposible

[@AnimeSideSwiper]

Please tell me if you found something working well

[@TysonWillert]

was going to buy it but the buy link has it only coming with one reciever, did they change it? In your video you got 2 recievers

[@aaronpk]

What country are you in? The link is correct on the Amazon US site: www.amazon.com/RGBlink-Transmitter-4k-Receivers-Broadcasts/dp/B0CLC96SWM?tag=apky2b-20

[@TysonWillert]

@@aaronpk thanks man, that link works

[@nickboardman7839]

Aaron - are able to extend to both displays?

[@aaronpk]

your computer will only see this as a single external monitor

[@nickboardman7839]

@@aaronpk thank you! Any you know in the market that will allow for 2 external displays to extend to?

[@aaronpk]

you could just use two sets. If you plug two of these into your computer's two HDMI ports, it will see them as two separate monitors. At that point you probably want to go with something that has HDMI passthrough so you can see a local copy of your monitor too, but that bumps you into a much different price point.

[@kreasu]

It says it's 1080p only on the transmission you'd need a peakdo wigig type thing to get full uncompressed 4k and that's only at 30hz

[@IrisXie-x9s]

RGBlink 4K Wireless HDMI Transmitter and Receiver Kit, One Transmitter and Two Receivers , Wireless USB Transmitter and Receiver kit , supports PC and mobile Phones for Meetings Live Broadcasts , Affordable price in Amz now!

[@colby_ybloc]

Why not just stream over LAN/WAN? Having decent wifi will easily yield a low latency and high resolution video output. I am even able to do high refresh rate with very little artifacting, if any. You obviously would need to have a client machine for each monitor, though you can get a capable one on third party markets for cheaper than these adapters cost. I bought an HP ProDesk for $100 and threw an AX210 in it so I could take advantage of Wifi 6e.

[@aaronpk]

Sure, but that'll take a lot more pieces, both hardware and software, to get working.

[@robertgrafe8775]

what protocol? ndi-hx?

[@MLSimons1]

Could this be used to support a mobile camera, say at a basketball game, livestream for a high school? HDMI Mini out to HDMI, female/female adapter to the stick, and then put the receiver on your ATEM - now you have a wireless HDMI camera on the sidelines?

[@aaronpk]

Sure, that seems reasonable! Keep in mind the latency of the link, but it should be low enough for that kind of angle that it's fine. I don't have a good way to test the range right now which is another concern, but at least you'd have line of sight in that setup so that helps.

[@MLSimons1]

Yes - my use case would be in a HS fieldhouse/gymnasium - I'm curious what we'd find. @@aaronpk

[@bobk3840]

Can you use it on a home theater receiver HDMI out port to wireless stream TV to another TV?

[@aaronpk]

I don't see why not!

[@recalcitrantrecidivist5927]

I want to hook this up to an endoscope in a bird nesting box and be able to wirelessly send pics and vids from the endoscpe to my phone or PC. Is this doable with this unit?

[@aaronpk]

Cool! As long as it has HDMI out you can use the transmitter. The receiver has HDMI out so you'd plug that in to a monitor directly, not a phone or computer

[@bertvantol9669]

Will this be powered by the HDMI-port ??

[@rgblink_support]

TX can be powered by the HDMI-port, but RX need to powered by adapter for 5V1A

[@tomsteuverkb8dxn132]

Amazon only has the single receiver version. FYI

[@aaronpk]

Weird! It had the dual receiver version at the same link last week! Maybe they're out of stock because everyone bought them after this video 😅

[@IrisXie-x9s]

RGBlink Ask Nano wireless HDMI transimtter and Receiver 4K is cool and affordable price , available in AMZN now

[@valeriikan]

@rgblink, how does it perform across walls? E.g. with a transmitter in an office room, and receiver in a living room. 4-7 meters in between with one or two walls.

[@rgblink_support]

This is not the best way to use it. With the increase of electronic devices, the wifi signal may be easily affected.

[@DiamondPointEvent]

Did you test the transmission range?

[@rgblink]

1TX and 1RX can transmit 30 meters stablely,1TX and 2 RX can transmit 15 meters stablely,1TX and 4 RX can transmit 10 meters stablely.

[@eli14eli14]

I'd love to buy a few sets but can't find these anywhere

[@aaronpk]

yeah i guess this video got too many views and everyone bought them all 😅

[@IrisXie-x9s]

RGBlink Ask Nano wireless HDMI transimtter and Receiver 4K is cool and affordable price , available in AMZN now

[@Audie1957]

Nice review, you only test in the same room, why not test in another room, for how long it has been reached, because that's what it's all about.

[@aaronpk]

I don't have anywhere to do that right now. My studio is just one room and I live above it in a loft style apartment, so I can only get 20ft away from it at most right now.

[@dwanelkemprai4983]

Can it be used on camera monitor for transmitting video to another monitor to pull focus 😅

[@rgblink_support]

Yes, it is supported. It is responsible for the video transmission function, and the focus still depends on the camera debugging.

[@NanoInfinite]

Can I connect transmitter to Canon Legria HF G70 - 4K and view it on smart tv

[@rgblink_support]

Yes, it is supported. It is responsible for the video transmission function

[@abyte1]

I wanted to purchase the adapter and used the link. It only shows 1 transmitter and 1 receiver in your video you say there are two receivers. Does the $169 included two receivers. Thanks

[@aaronpk]

The dual-receiver version is out of stock at the moment! I guess everyone bought them up!

[@IrisXie-x9s]

RGBlink Ask Nano wireless HDMI transimtter and Receiver 4K is cool and affordable price , available in AMZN now

[@christiangramann5693]

I would love to know if the device wifi still continues If you add your own wifi. Are you able to configure the device wifi 5GHz channels or is it 2.4 GHz channels? Or both?

[@rgblink_support]

It supports connecting the device to your own WiFi and continuing to use it.

[@bennguyen1313]

Any thoughts on USB Microscopes? I'd like to try use an HDMI transmitter/receiver to it! For electronic rework/soldering, you only need 10x-40x magnification... are there any USB based microscopes, true 4k/optical-zoom that you'd recommend? For example, one that can output video 1) wirelessly to a android/monitor receiver (Miracast/Wireless-HDMI) 2) Wired USB to latptop/tablet device 3) Wired HDMI Dual-lens for seeing depth.. and a large Field-of-View would also be nice. Unfortunately, the ones I've seen are very expensive, presumably because they have way too much zoom (130x-180x lens), or come with their own 10" display, or gimic features like remote-control, etc.

[@timmyswoop3781]

Would this work with gaming systems as well?

[@rgblink_support]

yeah, of course.

[@johnnyfontechanic7556]

Dji rec 2 to iPad Pro 2nd generation?

[@Travel-withJayyy]

Hey Arron I had a question on the dji pocket 3 if that’s cool. I wanted to use it as a wireless cam , but wanted to connect it to the yolo ultra . Would I be able to get a usb c to hdmi cable and then get a hdmi transmitter and receiver and connect one end to the dji and one to yolo creating a wireless signal for camera switching ? Instead of buying a 200ft cable

[@aaronpk]

That would technically work, but is there a particular reason you want to use the Pocket 3? In webcam mode you can't connect it to the app, so you can't even control it remotely at that point. Oh and a regular USB-C to HDMI cable won't work either, you would need to use one of the webcam-to-HDMI converters like the OBSBOT converter I did a video about earlier. So at that point you're probably better off with the OBSBOT Tail Air which has HDMI out and remote control.

[@Travel-withJayyy]

@@aaronpk yes the reason I want to do this is because I am launching anew camping channel , and have 5 cameras , was looking at the yolo ultra for the switching feature and didn’t want to have 50-100ft hdmi cables around campsites , so I wanted to go as wireless as I can . Already got the tail air , have a Panasonic cam that I want to use a hdmi transmitter on as well to the yolo box , have two GoPros and the Osmo 3 . I figure the switching would def save me a lot of time post editing and stitching everything together

[@Travel-withJayyy]

Basically trying to create a wireless multiview system . Wires in campsites can be disastrous lol

[@rgblinkben6546]

PK3 could connect directly to RGBlink mini-edge by type C interface, and other camera can do remotely with ASK nano TX and RX. And I agree with Aaron to use RGBlink TAO 1tiny with PK3 and from TAO 1tiny HDMI 2.0 output to ASK nano TX input, you get 4K video quality to RGBlink mini-edge which is installed with a ASK nano RX.

[@pauljamieson803]

Where can you buy these? If you go to the website they show up but the store does not find them .. thx

[@rgblink_support]

RGBlink Ask Nano wireless HDMI transimtter and Receiver 4K is cool and affordable price, available in AMZN now

[@lsmith77]

Does the Yolobox provide enough power for the receiver or does it require an additional USB-C power source?

[@aaronpk]

I had mixed luck with power over the HDMI port, I'd recommend always using an external USB-C power supply

[@lsmith77]

forgot to ask one more question about the yolobox. can I set the output resolution (f.e. 1080p) in order to run this into a pro or mini?

[@aaronpk]

@@lsmith77 so, interesting thing I noticed about this is that even when I had a 4K camera plugged in, one receiver was outputting 1080 to my ATEM. I suspect it outputs at the resolution negotiated during the HDMI link. So if you connect it to a 4K monitor it'll output 4K, or if you connect it to the YoloBox it will output 1080.

[@samuraiintellectual]

None of your links have 2 receivers, why is that?

[@aaronpk]

They do sell it as a 1 receiver kit as well but the US Amazon listing should have both options on the product page

[@IrisXie-x9s]

RGBlink Ask Nano wireless HDMI transimtter and Receiver 4k is cool and affordable price , available in AMZN now

[@Widflyinghigh]

I would get this if I knew it could transmit from DJI googlesV2 to a phone or computer. Anyone make it work for viewing FPV live with older system? Hotspot on phone works too

[@PowderMill]

Sorry… The DJI Goggles 2.0 and V2 (silly naming convention 🤔) do NOT have HDMI output capabilities. The original (very large and heavy / looks like a box with battery mounted on the head strap) DJI Goggles and Goggles RE (“Racing Edition”) did provide for HDMI in/out, but not the 2 / V2 / Integra goggles. I’m not sure what you’re trying to accomplish, but I was looking to display my Mavic-3 video stream in goggles. I ended up buying the DJI RC Pro controller. It has HDMI output via a “mini HDMI” connector. I also bought the Orqa Goggles which have HDMI input and output ports. I feed the output of the RC Pro controller into a 4 port HDMI distribution splitter and plug the goggles into one of the outputs. The other outputs are used for a second pair of HD-Zero goggles and external field monitor. I feed the fourth output into a FeelWorld WS1000 HDMI transmitter. The FeelWorld receiver is attached to a large field monitor which is used a few hundred feet away. It is a solid unit for the cost. Good luck!

[@szymonpanfil]

Would it stream video feed from DJI Mavic controller via USB-c host as it does on wired?

[@rgblink_support]

Yes, it supports unlimited transmission of HDMI signals

[@rod.awit2]

May i know if this works with external monitors with only HDMI ports?

[@rgblink_support]

Yes, maybe you need buy a converter according to your external monitors ports

[@Markus-cf8ev]

EU where to get ?! Or Northern Europe ?

[@rgblink_support]

It is available in AMZN now

[@mikeh8416]

Does the transmitter ALWAYS require external power?

[@rgblink_support]

Yes，You can use the 5V/1A power adapter to power the ASK nano 4K TX. You can also use a USB-A to USB-C cable to connect the TX's USB-C connector to your laptop's USB port to power the TX.

[@georgejhuang]

I don't see two receivers. did the product change?

[@aaronpk]

Yeah the dual receiver version is out of stock at the moment. I'm not sure why it completely disappeared from the listing instead of just showing out of stock.

[@IrisXie-x9s]

RGBlink Ask Nano wireless HDMI transimtter and Receiver 4K is cool and affordable price, available in AMZN now

[@pcprobot]

can this work with hdmi to hdmi to thunderbolt video in?

[@rgblink_support]

of course!

[@juancarlosrojascastro1940]

Does it work on the Yolo Box?

[@rgblink_support]

Of course！

[@cmdrefstathiusplacidus9003]

actually I guess it could be used you just capture the entire screen

[@dogorchavez2771]

Could I use this for a Nintendo Switch? Let's say I can connect the dock to my bedside table, then connect the HDMI transmitter to the dock and finally connect the receiver behind the TV which would be on the wall in front of where the bedside table is (about 2 meters in front). Would it work? I'm just doing it because the TV is on a rack on the wall and there is nowhere where I can put the dock nearby.

[@aaronpk]

It'll work, but the latency might be too much for some games.

[@dogorchavez2771]

@@aaronpk Thank you so much for the reply! I'm guessing I could use it for offline gaming on some chill games.

[@jasonluong3862]

What is the frequency used by these transceivers?

[@rgblink]

I'm not sure what you want to know. the Signal transmission is based on WiFi-5g signals. Prioritize using band 1 for transmission.

[@fannyzhang1084]

5180MHz~5240MHz and 5745MHz~5825MHz