The Best LOGITECH MOD You Need

🔸Best way you can install a custom wheel rim onto your Logitech G29 / G920 / G923 plus BONUS the wheel settings I'm using in Forza Horizon 5.
🔥Here you have the 3D files: www.thingivers...
🔸If you don't have a 3D printer, check on Google, there's plenty of 3D printing services around.
❗ I am not responsible for any of the damage you might cause to your wheel by installing this mod. Take your time, don't rush and everything will be alright.,
🔹Like and Comment! 🎮🚗
🎬SUBSCRIBE if you're cool! 😎
#Logitech

[@flyfox3621]

For anyone wondering about screws, i needed: 4x M3x8 to mount the metal paddles to the extension 4x M4x12 to put the paddle extension parts together 3x M4x25 to mount the back plastic button shell to the wheel core 6x M5x20 (+ 6x M5 nuts) to attach the wheel

[@kempachisaraki]

My steering wheel does not have screws, what size should I buy?

[@flyfox3621]

@@kempachisaraki I used M5x20mm, but the length may vary so i suggest a variety pack to test different sizes. you'll also need M5 nuts

[@MarkBrave992]

@Lucas D. Thanks mate! I've pinned your comment to help others as well, good job 👍

[@mattyt531]

Thank you for your comment, that's really helpful, I have been thinking about this modification. Did you reuse any of the original hardware? Is that list all new hardware?

[@flyfox3621]

​@@mattyt531 Glad i could help! that list is new hardware, yes. except for the original M3x8 that hold the stock metal paddles, I had to buy all separately (some wheels include M5 screws but you will need M5 nuts for the hexagonal slots on the rear adapter part) I was able to reuse the original long screws holding the wheel core in place, so they're not included. same with all the screws for the button panel, they can be reused

[@lorybrooks9940]

Such a great mod! I'm not planning on installing a custom wheel anytime soon, but this is definitely the best custom wheel solution I've seen around for Logitech wheels. Cheers!

[@MarkBrave992]

Thank you, the need for something can push you to be innovative 😎

[@janix3723]

I Order a Offset wheel, where i can find this Adapter? I found it on AliExpress but he dont send this to Germany. Or the File for the 3d printer?

[@GregoryShtevensh]

Nice! I just came from a G29 to a CSL DD. And as an owner and user of both DD and gear driven, I'm gonna say, this mod is actually worth it! The G29 is surprisingly nearly as good as even a DD! Yes I'm not talking shlt here... is it louder? Yes! And? It's still a great wheel

[@kranth8885]

I wasn’t going to buy a custom wheel, but now I have to just because this is so well done!

[@GabrielP_s_y]

I like this! Looks ideal for the G923 actually so it keeps all its added functionalities It is important to keep your wheel weight as low as possible though

[@cheskolipaak]

I have found this video before actually buying the Logitech G29 and i forgot to save this and finally found it after a month 😂 best solution for the wheel adapter, i love how the buttons are in front of the wheel!

[@wrick17]

Late to the party, awesome mod, made my day. Was searching for one where all the buttons are not covered and useless anymore. Thanks a lot to you for making this video and also to the creator of this mod. ❤

[@AhmadShehadeh-gw3wo]

Thank you bro, i've followed your steps and i upgraded my Logitech wheel, it very nice honestly since the Logitech board is in front of the wheel not behind it. Great video dear.

[@dreanime2]

Just finished modding my wheel, thanks for the video it helps a lot. 👍

[@FrenchyAU]

This looks like an amazing mod and I'm absolutely gonna give it a try, thankfully I know someone with a 3d printer, though I am wondering if you or someone else knows if someone has designed a piece to go on the button base to fill in the gaps? So like there the start/select buttons are now free floating as they would normally go over the wheel itself, someone should design a plate to go inbetween the buttons and the button base to make it look cleaner

[@Frodeusz]

Hello. Fantastic job. I'm just finishing my modifications based on your design. Great thing. It also fits the G923 on which it works for me.

[@tonyortega3275]

How deep is the steering wheel?

[@Frodeusz]

8cm

[@wirklich_niemand]

with such few power you don't want a heavy rim like that. keep it as light as possible. you only get an even more laggy experience with that.

[@Triple88a]

nicely done, the biggest drawback to swapping a custom wheel is losing the buttons. I love that you get to keep your buttons with this.

[@MarkBrave992]

Thank you, those were exactly my words and with a little bit if work got around it 💪

[@canseveribrahim]

Works well. Really appreciate it.

[@Ihxku]

i did it in CNC aluminium it was a quite trip but now my wheel is way more bett

[@adrianmh1511]

Oh I’ve BEEEN waiting for this video 🔥🔥🔥🔥🔥

[@MarkBrave992]

Was about time 😋 I hope it helps you!

[@adrianmh1511]

@@MarkBrave992 getting this printed this week, really excited 😌 but one thing I wanted to know, don’t you need the screws to the back of the base plate of the button box or does it hold fine without them ?

[@jiajunliu4746]

Love this mod, amazing! Wanted to swap a custom wheel but all the mods online are having buttons behind the wheels, this mod is fucking awesome!

[@domdomalakazam4638]

That's perfect! also, I have ditch buttons and start using xbox controller instead just to save some weight. Plus I have add 30v adapter. Works like a charm ✨️! Thx

[@josephbornman8462]

Yo, did you keep the paddle shifters or ditch those too?

[@arranmc182]

I did this mod to a G29 and it reduced the rotaional speed because the wheel rim weighs more so now the motors have more mass they need to rotate thus reducing the output from the motors as more weight acts as a damper the exact oposite to what you want to do to the wheel as more damper affect the less you feel details from the force feedback. remember the G29 and such are only rated for around 2.5nm of force so any extra weight will reduce that down, personally I see this mod as paying to downgrade the feedback feeling of the wheel.

[@siyarboran641]

the button unit mount has not suited my g923 what can i do?

[@darthlegoman2608]

The main concern a lot of people have when mounting an aftermarket wheel on the G29 is motor life and weight of what's mounted. The biggest drawback of doing this may be weight. Correct me if I'm wrong.

[@Noahdea611]

I may be a little late, but wheel swapping you do lose a little ffb but that's it. wheel swapping does not affect motor life

[@mattyt531]

Very cool modification. Do you feel that the FFB was effected in anyway? It definitely looks that it translates the FFB to the wheel better than the popular adapter that goes over the buttons.

[@Bassijo]

muchas gracias por este diseño y la explicacion de como montar todo. solo faltaria un embellecedor para los botones r2, r3,l2 y l3, por lo demas increible

[@footm78]

THE BEST G29 MOD VIDEO

[@guillaumeschleidt490]

Perfect, thank you !

[@Fri3dPickle]

Do you have a link that the same when you used?

[@GeorgeModellingforBeginners]

@MB992 very useful video and I am lucky to come across it. My biggest issue is to find a suitable wheel. I live in UK and the cheapest option is almost £30 including postage. Also are all wheels compatable (shape, screw position etc.). I would I appreciate if someone could share a link for a suitable wheel.

[@NanceLvr]

Just started printing mine :)

[@ErwinKnapen]

do you have a link to the deep dish steering wheel you used?

[@Marolex3]

This is perfect! :D

[@mr.anonymoose2810]

I wanna do something very similar like this I have this old racinf wheel that i got from one of my dads old cars, and i drilled holes for it to screw onto the front with 3 of the 6 hex screws I took off the button face and i screwed the racing wheel to the back part of the button face, and i need some standoffs so i can have the buttons in front

[@ItsMeJulious]

4x m3x8mm phillips end 4x m4x12mm hex key end 3x m4x25mm phillips end 6 m5 nuts

[@jooniversalstudio5757]

5:47 How to remove the front plate from the original steering wheel?

[@Davey_11]

Looking at my own g920 I don’t think this will work bc the button plate dose not separate from the neck

[@StefanoL40]

Hey, could you share the link to the wheel rim that you bought?

[@TheAccuso]

That is very cool indeed, was just wondering what wheel you used and unless i am missing something, i don't seem to find a link for it in the description, in the thingverse page or in the video. Cheers have a good day. Also how much is the cost (although i know you used your stuff i am sure you'll have an idea of how much it costs to do it from a professionist).

[@Demrik1]

looks awesome

[@lafaina79]

I dont want to modify the wheel but for rally its way too small, might be inevitable eventually.

[@Joakim_Johansson]

What size screws do i need?

[@emaxos]

Have you considered making a bundle kit with 3d printed parts and screws? Because I'll buy right away, I'm in southern Italy and 3d printing services are more expensive than a Cheap 3d printer, deepdish steering wheel is around 40€ (that should be the big expense) if i check how much to print and ship 3d parts is around 120€.. seriously can you make it?

[@mr.anonymoose2810]

This looks really cool, but I don't know if I will do this because I don't want to mess something up.

[@Kelvin-w6s]

wow, what a great video, I would like you to tell me where to buy the steering wheel

[@elias_sim802]

where did you get the wheel

[@sparx8802]

Woah I’ve never seen the buttons put in the front of the wheel. Usually people put it in the behind the wheel. Now with the buttons in the front it looks like a flat wheel. It doesn’t look like an old muscle car.

[@MarkBrave992]

It helps a lot having easy access to all the buttons and it also makes the wheel more sturdy as you attach it right to the base 👌

[@janix3723]

Wo kann ich diese Adapter kaufen/bestellen ?

[@jooniversalstudio5757]

What material is your 3d printed? PLA-ST or PLA-GF?

[@meo6540]

how do you connect g920 steering wheel to ps5? please help

[@HeadsEnjoyer]

Great mod! Would this also work with a 8 cm deep dish instead of 9.5?

[@MarkBrave992]

Thanks! It might work, but the paddles will be too close to the wheel. 1.5cm difference I think it's too much

[@Sunburst_YT]

I love that wheel that didn’t work for you, where did you get it from?

[@philstark1744]

Great work!! What type of screws u r using? Is it M3 and the length?

[@mckoygaming224]

the screw that comes with the deep dish is short so i went to the hardware store and bought a longer screw.. just bring the screw that came with the wheel (deep dish)

[@JDA9725]

Is there a way to purchase these? I don't have a 3D printer to get the parts 😢

[@sybrax4406]

Nice vidéo ! What is the reference of the wheel please ?

[@DBrownie99]

what is the best printing material to keep the design from breaking

[@majkCZplay]

Hi dude, I'm bouta do this mod. What is the PCD of the adapter bolts? Mine wheel is 330 cm with 6x70 PCD.

[@ava4835229]

Hello. Please tell me what the steering wheel takeaway is in centimeters. Only the diameter of the wheel is indicated in the video. Thanks.

[@MrStrawberryTV]

Do you think it will be the same process with the PS5 version?

[@theplayasball1210]

Do you think it’ll be better to use bolts to fasten the wheel to the base adapter? I’m worried about the plastic stripping

[@clkbait3200]

where can i buy those adapter mods?

[@okejo]

hola amigo una consulta, el volante funciona sin conectarle los botones? Por cierto muy buen mod.

[@gg0011amognus]

will it still work without the button pcb?

[@jd11748]

Do you think a 345mm wheel would work or 350mm only?

[@azapacher]

Please make it for flat wheels too

[@njfishslayer5627]

What’s the best material to print this in I bin using it from a week all was good until I played dirt rally today and it’s like all flabby and wiggly like it’s gonna snap some on the first piece you install good thing is my print guy made me an extra one so I’m still in commission for now

[@mattyt531]

I used PLA printed at 60% infill and it's working well. Feel solid. I used the hardware suggested in the other comment

[@mattyt531]

I also made sure to print with supports for the 3 screw holes the go into the wheel. I used a punch to get them out after.

[@josephbornman8462]

I would like to just have the paddle shifters and not the bottons

[@Tyxime]

Hey i would like to use this mod but i got a 70mm deep wheel do you think It's could work?

[@Editr101]

Question. Can you use this mod on a g29?

[@jonathangerman671]

Has anyone figured out a way to get a quick release adapter to work with this? Links?

[@Slownlowerrrr]

My g29 red dial not response while i change the wheel, can you give me some advice?? pls help many thanks !

[@MountainMcCumbee]

I want this mod so bad but I have no way of getting anyone to 3D print anything.

[@tboneslaydog3316]

Why do my paddles not click ?

[@juanmaceballoscimpeanu1214]

very good mod, but I think that in a steering wheel with a force feedback as mediocre as the g29 it would be better to mod f1 or gt3 so that the size of the rim does not affect the few n/m it has

[@majkCZplay]

Awesome mod and great video. How is the force feedback? I want to use custom and bigger wheel but I don't like the fact I will loose force feedback, also I don't want to damage the motors inside. Could someone give advice or share experience?

[@muneeb9245]

you wont you just have to turn it up a lil more then usual

[@arranmc182]

More weight from a bigger rim will act as a damper reducing power output from the motors as they will now have to work harder because of the extra rotational mass, remember the G29 and such is only rated around the 2.5nm mark for the power output so more wight will reduce that down, you cant escape physics.

[@majkCZplay]

@@arranmc182 I used only 13 inch very lightweight rim. Weights just a tiny bit more than original G29 rim with buttons. I mounted mine straight on the base shaft, no adapters added. The motors are handling it well, no issues and my drifting even got better :)

[@AtanasStojanovski21]

hi, i wanna start sim racing/ drifting and im still debating over getting the Thrust master T300 RS GT or the Logitech G29/920 what will you recommend me getting ? note that i live in a shared flat with 5 more people and i've heard the Logitech wheel's are noisy

[@mattyt531]

I hear the t300 is a better wheel. I have the Logitech with this modification and it's nice, but the thrust master is a better wheel.

[@dcars806]

what custom wheel rim are you using

[@hyperdash2027]

Were to get this wheel?

[@zkasxplr]

Could you send me a link to the wheel you used?

[@mattyt531]

I used a 14 inch diameter wheel that is 9.5cm deep. I found one on Amazon for $40

[@zkasxplr]

@@mattyt531 thanks man

[@rykerhasyounow]

Just getting prepd to do this mod. Can you tell me if the prints have held up? Any flex/weakening? Great build. 👍👍

[@MarkBrave992]

If you do enough infill, you won’t have any issues. At first It became loose, with 30%, but used 60% and was much stronger. Mine had a tendency to warp during printing, but that needed some calibration on the printer

[@rykerhasyounow]

@@MarkBrave992 Thanks dude. I'll try to let you know how it goes. 👍👍

[@tonyortega3275]

@@rykerhasyounow how did it go!?

[@officalflash5534]

I need a link for the exact same wheel

[@officalflash5534]

wat is the cheapest 3d printing service under 20£ uk

[@mfelektro]

How much does this mod cost to do?

[@mikereyes1769]

Steering wheel link?

[@TotoWolffJr]

Where do u buyed the wheel

[@Tengkumuhammadsharifaddeen]

where can i get this adapter

[@urnightmare8084]

is it working with semi dish wheel?

[@Barkstar69]

Just about to do this mod. Thanks for this! Did you need to buy any extra screws/nuts/bolts?

[@mattyt531]

I was thinking this too. It seems there is extra fasteners to assemble the paddle shifter extensions.

[@Barkstar69]

@@mattyt531 I ended up getting it printed and just bought a box of different sized "M" bolts and nuts, just in case. Defos need some. But once you get it setup its amazing! I'm loving the buttons up front of the full size rim.

[@mattyt531]

@@Barkstar69 awesome to hear. I have a 3d printer and was thinking to try this modification.

[@theshorts9109]

@@mattyt531 bro whats the price to print it....i am thinking to print it🤔🤔

[@mattyt531]

@@theshorts9109 I don't remember how much filiment I used. I printed all the parts in one shot with 60% infil using PLA. It was less than 24 hour for sure. Sliced with Cura.

[@ItsTyrex1]

will it work with a non deep dish wheel?

[@zikzaks9]

Yes but the buttons are a bit hard to reach with tumbs

[@tilmanseide4673]

Hey, could I get a link to the wheel that you used?

[@MarkBrave992]

Hi, it seems the ebay link doesn't work anymore, it was a boss mount compatible, 35cm diameter and 9.5cm deep dish. It was relatively cheap, only £17.

[@tilmanseide4673]

@@MarkBrave992 Ah, I found a Sparco wheel that should fit. I'm wondering, what screws did you use?

[@stormhypertusk5055]

i have a question i bought the same wheel and the 3d printed the parts but the wheel just falls off with the screws still in it

[@mattyt531]

You are missing the M5 nuts to secure the wheel in the first part that goes on in the back.

[@stormhypertusk5055]

@@mattyt531 I got it and then the 3d print broke 😭😭😭

[@mattyt531]

@@stormhypertusk5055 damn. I printed it PLA 60% infill. Seems solid so far

[@mattyt531]

@@stormhypertusk5055 I also printed. It with supports for the 3 screw holes that go into the base. I punched out the supports after. Came out clean.

[@flipfloppop2190]

Does this mod affect the ffb?

[@benpernot4114]

As long as you buy a wheel with the same weight it shouldn’t make a big difference.

[@fitchyyboi]

Yes. It's simple physics.

[@snysign]

Bro plz reply i m from INDIA , Your STEERING Logitech mod video is awesome but it will work for you on HARD drifting ,looks so CRITICAL.